arXiv subjects

Guglielmo Lanzani

Publications and source records attributed to Guglielmo Lanzani.

At least 19 recordsLinked to original sources

arXiv2026

Tamm Plasmon Resonance Responsiveness to SARS-CoV-2 Virus-Like Particles

Bioresponsive optical materials that transduce nanoscale biointerface events into measurable spectral signals are of growing interest for sensing and antiviral technologies Here we show that a Tamm plasmon TP device consisting of a SiOTiO distributed Bragg reflector capped with a nanostructured silver layer exhibits a selective and structure dependent response to SARSCoV2 virus like particles VLPs Upon VLP exposure the conventional wavelength shift delta lambda of the TP resonance is minimal whereas the resonance depth undergoes a systematic attenuation To capture both spectral and amplitude variations we introduce a displacement angle alpha defined from the translation vector of the Tamm dip before and after exposure The angle alpha increases monotonically with VLP concentration and enables a limit of detection of 13 ng per mL Control experiments with polystyrene nanoparticles of similar size and with heat denatured VLPs yield negligible changes indicating sensitivity to the native conformational state of viral surface proteins rather than to generic nanoparticle morphology or bulk refractive index effects These results establish Tamm plasmon structures as promising bioresponsive platforms for label free detection and for probing structure dependent virus material interactions.

physics.optics↗

arXiv2022

Tamm Plasmon Resonance as Optical Fingerprint of Silver/Bacteria Interaction

Incorporation of responsive elements into photonic crystals is an effective strategy for building up active optical components to be used as sensors, actuators and modulators. In these regards, Tamm Plasmon (TP) modes have arisen recently as powerful optical tools for the manipulation of light-matter interaction and for building sensors/actuators. These emerge at the interface between a dielectric mirror and a plasmonic layer and, interestingly, can be excited at normal incidence angle with relatively high quality factors. Although its field is located at the interface between the dielectric mirror and the metal, recent studies have demonstrated that corrugation at the nanoscale permits to access the TP mode from the outside, opening new exciting perspectives for many real-life applications. Here, we show that the TP resonance obtained by capping a distributed Bragg reflector with a nanostructured layer of silver is sensitive to the presence of bacteria. We observed that nanoscale corrugation is essential for accessing the TP field, while the well-known bio-responsivity of silver nanostructures renders such a localised mode sensible to the presence of Escherichia Coli. Electrodoping experiments confirm the pivotal role of nanostructuration, as well as strengthening our hypothesis that the modifications of the TP mode upon exposure to bacteria are related to the accumulation of negative charge due to the bacterial-driven removal of Ag+ ions from its lattice. Finally, we devised a case study in which we disentangled optically the presence of proliferative and non-proliferative bacteria using the TP resonance as a read-out, thus making these devices as promising simple all-optical probes for bacterial metabolic activity, including their response against drugs and antibiotics.

physics.optics↗

arXiv2022

The Impact of Tamm Plasmons on Photonic Crystals Technology

This review describes hybrid photonic-plasmonic structures based on periodic structures that have metallic coatings or inserts which make use of the Tamm plasmon for sensing applications. The term Tamm plasmon refers a particular resonance resulting from the enhancement of a surface plasmon resonance absorption via coupling to a wavelength-matching photonic bandgap provided by a photonic crystal. Tamm plasmon-based devices come in an ample variety of material and geometric combinations, each designed to perform a specific kind of measurement. While the physical effect is quite well documented and understood, its implementation in devices is still a rapidly developing and thriving field, which leaves open many possibilities for novel designs and new applications. We therefore aim of giving a complete overview on the topic, so as to provide an ordered collection of designs and uses, as well as to spur further development on the subject of the Tamm plasmon for sensing applications.

physics.optics↗

arXiv2021

Azobenzene photoisomerization probes cell membrane nanoviscosity

The viscosity of cell membranes is a crucial parameter that affects the diffusion of small molecules both across and within the lipidic membrane and that is related to several diseases. Therefore, the possibility to measure quantitatively membrane viscosity on the nanoscale is of great interest. Here, we report a complete investigation of the photophysics of an amphiphilic membrane-targeted azobenzene (ZIAPIN2) and we validate its use as viscosity probe for cell membranes. We exploit ZIAPIN2 the trans-cis photoisomerization to develop a molecular viscometer and to assess the viscosity of Escherichia coli bacteria membranes employing time-resolved fluorescence spectroscopy. Lifetime measurements of ZIAPIN2 in E. coli bacteria suspensions correctly indicate that membrane viscosity decreases as the samples were heated up. Our results report a membrane viscosity value in live E. coli cells going from 10 to 5 cP, increasing the temperature from 22 °C up to 40 °C.

physics.chem-ph↗

arXiv2021

Bringing Microbiology to Light: Towards all-Optical Electrophysiology in Bacteria

The observation of neuron-like behaviour in bacteria, such as the occurrence of electric spiking and extended bioelectric signalling, points to the role of membrane dynamics in prokaryotes. Electrophysiology of bacteria, however, has been overlooked for long time, due to the difficulties in monitoring bacterial bioelectric phenomena with those probing techniques that are commonly used for eukaryotes. Optical technologies can allow a paradigm shift in the field of electrophysiology of bacteria, as they would permit to elicit and monitor signalling rapidly, remotely and with high spatiotemporal precision. In this perspective, we discuss about the potentiality of light interrogation methods in microbiology, encouraging the development of all-optical electrophysiology of bacteria.

physics.bio-ph↗

arXiv2021

Bringing the Interaction of Silver Nanoparticles with Bacteria to Light

In the last decades the exploitation of silver nanoparticles in novel antibacterial and detection devices have risen to prominence for their well-known specific interaction with bacteria. The vast majority of studies focus on the investigation over the mechanism of action underpinning bacterial eradication, while little efforts have been devoted to the modification of silver optical properties upon interaction with bacteria. Specifically, given the characteristic localized surface plasmon resonance of silver nanostructures, which is sensitive to changes in the charge carrier density or in the dielectric environment, these systems can offer a handle in the detection of bacteria pathogens. In this review, we present the state of art of the research activity on the interaction of silver nanoparticles with bacteria, with emphasis on the modification of their optical properties. This may indeed lead to easy color reading of bacterial tests and pave the way to the development of nanotechnology silver based bacterial detection.

physics.bio-ph↗

arXiv2021

The Impact of Bacteria Exposure on the Plasmonic Response of Silver Nanostructured Surfaces

Silver, especially in the form of nanostructures, is widely employed as an antimicrobial agent in a large range of commercial products. The origin of the biocidal mechanism has been elucidated in the last decades, and most likely originates from silver cation release due to oxidative dissolution followed by cellular uptake of silver ions, a process that causes a severe disruption of bacterial metabolism and eventually leads to eradication. Despite the large number of works dealing with the effects of nanosilver shape/size on the antibacterial mechanism and on the (bio)physical chemistry pathways that drive bacterial eradication, little effort has been devoted to the investigation of the silver NPs plasmon response upon interaction with bacteria. Here we present a detailed investigation of the bacteria-induced changes of the plasmon spectral and dynamical features after exposure to one of the most studied bacterial models, Escherichia Coli. Ultrafast pump-probe measurements indicate that the dramatic changes on particle size/shape and crystallinity, which stem from a bacteria-induced oxidative dissolution process, translate into a clear modification of the plasmon spectral and dynamical features. This study may open innovative new avenues in the field of biophysics of bio-responsive materials, with the aim of providing new and reliable biophysical signatures of the interaction of these materials with complex biological environments.

cond-mat.mes-hall↗

arXiv2020

Electrochromism in Electrolyte-Free and Solution Processed Bragg Stacks

Achieving an active manipulation of colours has huge implications in optoelectronics, as colours engineering can be exploited in a number of applications, ranging from display to lightning. In the last decade, the synergy of the highly pure colours of 1D photonic crystals, also known as Bragg stacks, with electro-tunable materials have been proposed as an interesting route to attain such a technologically relevant effect. However, recent works rely on the use of liquid electrolytes, which can pose issues in terms of chemical and environmental stability. Here, we report on the proof-of-concept of an electrolyte free and solution-processed electrochromic Bragg stack. We integrate an electro-responsive plasmonic metal oxide, namely indium tin oxide, in a 1D photonic crystal structure made of alternating layers of ITO and TiO2 nanoparticles. In such a device we observed 15 nm blue-shift upon application of an external bias (5 V), an effect that we attribute to the increase of ITO charge density arising from the capacitive charging at the metal oxide/dielectric interface and from the current flowing throughout the porous structure. Our data suggest that electrochromism can be attained in all-solid state systems by combining a judicious selection of the constituent materials with device architecture optimisation.

physics.app-ph↗

arXiv2020

Ultrafast photochromism and bacteriochromism in one dimensional hybrid plasmonic photonic structures

Hybrid plasmonic photonic structures combine the plasmonic response with the photonic band gap, holding promise for utilization as optical switches and sensors. Here, we demonstrate the active modulation of the optical response in such structures with two different external stimuli, e.g. laser pulses and bacteria. First, we report the fabrication of a miniaturized (5 x 5 mm) indium tin oxide (ITO) grating employing femtosecond laser micromachining, and we show the possibility to modulate the photonic band gap in the visible via ultrafast photoexcitation in the infrared part of the spectrum. Note that the demonstrated time response in the picosecond range of the spectral modulation have an industrial relevance. Moreover, we manufacture one-dimensional photonic crystals consisting of a solution-processed dielectric Bragg stack exposing a top-layer of bio-active silver. We assign the bacterial responsivity of the system to polarization charges at the Ag/bacterium interface, giving rise to an overall blue shift of the photonic band gap.

physics.optics↗

arXiv2020

A hybrid P3HT-Graphene interface for efficient photostimulation of neurons

Graphene conductive properties have been long exploited in the field of organic photovoltaics and optoelectronics by the scientific community worldwide. We engineered and characterized a hybrid biointerface in which graphene is coupled with photosensitive polymers, and tested its ability to elicit lighttriggered neural activity modulation in primary neurons and blind retina explants. We designed such a graphene-based device by modifying a photoactive P3HT-based retinal interface, previously reported to rescue light sensitivity in blind rodents, with a CVD graphene layer replacing the conductive PEDOT:PSS layer to enhance charge separation. The new graphene-based device was characterized for its electrochemical features and for the ability to photostimulate primary neurons and blind retina explants, while preserving biocompatibility. Light-triggered responses, recorded by patch-clamp in vitro or MEA ex vivo, show a stronger light-transduction efficiency when the neurons are interfaced with the graphene-based device with respect to the PEDOT:PSS-based one. The possibility to ameliorate flexible photo-stimulating devices via the insertion of graphene, paves the way for potential biomedical applications of graphenebased neuronal interfaces in the context of retinal implants.

q-bio.NC↗

arXiv2019

Drastic Improvement of Air Stability in an n-type Doped Naphtalene-diimide Polymer by Thionation

Organic thermoelectrics are attractive for the fabrication of flexible and cost-effective thermoelectric generators (TEGs) for waste heat recovery, in particular by exploiting large-area printing of polymer conductors. Efficient TEGs require both p- and n-type conductors: so far, the air instability of polymer n-type conductors, which typically loose orders of magnitude in electrical conductivity (σ) even for short exposure time to air, has impeded processing under ambient conditions. Here we tackle this problem in a relevant class of electron transporting, naphthalene-diimide co-polymers, by substituting the imide oxygen with sulphur. n-type doping of the thionated co-polymer gives rise to a higher σ with respect to the non-thionated one, and most importantly, owing to a reduced energy level of the lowest-unoccupied molecular orbital, σ is substantially stable over 16 h of air exposure. This result highlights the effectiveness of chemical tuning to improve air-stability of n-type solution-processable polymer conductors and shows a path towards ambient large-area manufacturing of efficient polymer TEGs.

physics.app-ph↗

arXiv2019

Large Polaron Generation and Dynamics in 3D Metal-Halide Perovskites

In recent years, metal halide perovskites have generated tremendous interest for optoelectronic applications and their underlying fundamental properties. Due to the large electron-phonon coupling characteristic of soft lattices, self-trapping phenomena are expected to dominate hybrid perovskite photoexcitation dynamics. Yet, while the photogeneration of small polarons was proven in low dimensional perovskites, the nature of polaron excitations in technologically relevant 3D perovskites, and their influence on charge carrier transport, remain elusive. In this study, we used a combination of first principle calculations and advanced spectroscopy techniques spanning the entire optical frequency range to pin down polaron features in 3D metal halide perovskites. Mid-infrared photoinduced absorption shows the photogeneration of states associated to low energy intragap electronic transitions with lifetime up to the ms time scale, and vibrational mode renormalization in both frequency and amplitude. Density functional theory supports the assignment of the spectroscopic features to large polarons leading to new intra gap transitions, hardening of phonon mode frequency, and renormalization of the oscillator strength. Theory provides quantitative estimates of the charge carrier masses and mobilities increase upon polaron formation, confirming experimental results. Overall, this work contributes to complete the scenario of elementary photoexcitations in metal halide perovskites and highlights the importance of polaronic transport in perovskite-based optoelectronic devices.

physics.app-ph↗

arXiv2018

Pump-Push-Probe for Ultrafast All-Optical Switching: The Case of a Nanographene Molecule

In the last two decades, the three-beams pump-push-probe (PPP) technique has become a well-established tool for investigating the multidimensional configurational space of a molecule, as it permits to disclose precious information about the multiple and often complex deactivation pathways of the excited molecule. From the spectroscopic point of view, such a tool has revealed details about the efficiency of charge pairs generation and conformational relaxation in p-conjugated molecules and macromolecules. In addition, PPP has been effectively utilised for modulating the gain signal in conjugated materials by taking advantage of the spectral overlap between stimulated emission and charge absorption in those systems. However, the relatively low stability of conjugated polymers under intense photoexcitation has been a crucial limitation for their real employment in plastic optical fibres (POFs) and for signal control applications. Here, we highlight the role of PPP for achieving ultrafast all-optical switching in p-conjugated systems. Furthermore, we report new experimental data on optical switching of a newly synthesised graphene molecule, namely dibenzo[hi,st]ovalene (DBOV). The superior environmental and photostability of DBOV and, in general, of graphene nanostructures can represent a great advantage for their effective applications in POFs and information and communications technology.

physics.chem-ph↗

arXiv2018

Broadband Defects Emission and Enhanced Ligand Raman Scattering in 0D Cs3Bi2I9 Colloidal Nanocrystals

Excitonic 0D and 2D lead-halide perovskites have been recently developed and investigated as new materials for light generation. Here we report broadband (> 1 eV) emission from newly synthesised zero-dimensional (0D) lead-free colloidal Cs3Bi2I9 nanocrystals. We investigate the nature of their emissive states as well as the relative dynamics which are currently hotly debated. In particular, we find that the broadband emission is made by the coexistence of emissive excitons and sub-bandgap emissive trap-states. Remarkably, we observe evidence of enhanced Raman scattering from the ligands when attached to the nanocrystals surface, an effect that we preliminary attribute to strong exciton-ligands electronic coupling in these systems.

cond-mat.mtrl-sci↗

arXiv2018

Tattoo-Paper Transfer as a Versatile Platform for All-Printed Organic Edible Electronics

The use of natural or bioinspired materials to develop edible electronic devices is a potentially disruptive technology that can boost point-of-care testing. The technology exploits devices which can be safely ingested, along with pills or even food, and operated from within the gastrointestinal tract. Ingestible electronics could potentially target a significant number of biomedical applications, both as therapeutic and diagnostic tool, and this technology may also impact the food industry, by providing ingestible or food-compatible electronic tags that can smart track goods and monitor their quality along the distribution chain. We hereby propose temporary tattoo-paper as a simple and versatile platform for the integration of electronics onto food and pharmaceutical capsules. In particular, we demonstrate the fabrication of all-printed Organic Field-Effect Transistors (OFETs) on untreated commercial tattoo-paper, and their subsequent transfer and operation on edible substrates with a complex non-planar geometry.

physics.app-ph↗

arXiv2017

Electro-optic and magneto-optic photonic devices based on multilayers photonic structures

In this work we describe different types of photonic structures that allow tunability of the photonic band gap upon the application of external stimuli, as the electric or magnetic field. We review and compare two porous 1D photonic crystals: in the first one a liquid crystal has been infiltrated in the pores of the nanoparticle network, while in the second one the optical response to the electric field of metallic nanoparticles has been exploited. Then, we present a 1D photonic crystal made with indium tin oxide (ITO) nanoparticles, and we propose this system for electro-optic tuning. Finally, we describe a microcavity with a defect mode that is tuned in the near infrared by the magnetic field, envisaging a contact-less magneto-optic switch. These optical switches can find applications in ICT and electrochromic windows.

physics.optics↗

arXiv2017

Near-Infrared Emitting Single Squaraine Dye Aggregate with large Stokes shift

The study of supramolecular interactions and aggregation behaviour of functional materials is of great importance to tune and extend their spectral sensitivity and, hence, improve the optoelectronic response of related devices. In this study, we resolve spatially and spectrally the absorption and emission features of a squaraine aggregate by means of confocal microscopy and absorption/photoluminescence spectroscopy. We observe that the aggregate affords both a broad absorption spectrum (centred at 670 nm), likely originated by a dyes configuration with allowed J- and H- arrangements, and a strong and relatively narrow emission in the near-infrared (NIR) part of the spectrum (centred at 780 nm), with a remarkable Stokes shift of 110 nm that is among the largest exhibited by squaraine dyes. These peculiarities would be beneficial for extending the spectral sensitivity of bot photovoltaic and light-emitting diodes, and extremely appealing for possible applications of these aggregates as NIR fluorescent probes in biomedical applications.

physics.chem-ph↗

arXiv2016

Electroabsorption in MoS$_2$

To translate electrical into optical signals one uses the modulation of either the refractive index or the absorbance of a material by an electric field. Contemporary electroabsorption modulators (EAMs) employ the quantum confined Stark effect (QCSE), the field-induced red-shift and broadening of the strong excitonic absorption resonances characteristic of low-dimensional semiconductor structures. Here we show an unprecedentedly strong transverse electroabsorption (EA) signal in a monolayer of the two-dimensional semiconductor MoS2. The EA spectrum is dominated by an apparent linewidth broadening of around 15% at a modulated voltage of only Vpp = 0.5 V. Contrary to the conventional QCSE, the signal increases linearly with the applied field strength and arises from a linear variation of the distance between the strongly overlapping exciton and trion resonances. The achievable modulation depths exceeding 0.1 dBnm-1 bear the scope for extremely compact, ultrafast, energy-efficient EAMs for integrated photonics, including on-chip optical communication.

cond-mat.mtrl-sci↗