arXiv subjects

Guido Agapito

Publications and source records attributed to Guido Agapito.

At least 55 records · Page 3Linked to original sources

arXiv2022

Key wavefront sensors features for laser-assisted tomographic adaptive optics systems on the Extremely Large Telescope

Laser guide star (LGS) wave-front sensing (LGSWFS) is a key element of tomographic adaptive optics system. However, when considering Extremely Large Telescope (ELT) scales, the LGS spot elongation becomes so large that it challenges the standard recipes to design LGSWFS. For classical Shack-Hartmann wave-front sensor (SHWFS), which is the current baseline for all ELT LGS-assisted instruments, a trade-off between the pupil spatial sampling [number of sub-apertures (SAs)], the SA field-of-view (FoV) and the pixel sampling within each SA is required. For ELT scales, this trade-off is also driven by strong technical constraints, especially concerning the available detectors and in particular their number of pixels. For SHWFS, a larger field of view per SA allows mitigating the LGS spot truncation, which represents a severe loss of performance due to measurement biases. For a given number of available detectors pixels, the SA FoV is competing with the proper sampling of the LGS spots, and/or the total number of SAs. We proposed a sensitivity analysis, and we explore how these parameters impacts the final performance. In particular, we introduce the concept of super resolution, which allows one to reduce the pupil sampling per WFS and opens an opportunity to propose potential LGSWFS designs providing the best performance for ELT scales.

astro-ph.IM↗

arXiv2021

Advances in control of a Pyramid Single Conjugate Adaptive Optics system

Adaptive optics systems are an essential technology for the modern astronomy for ground based telescopes. One of the most recent revolution in the field is the introduction of the pyramid wavefront sensor. The higher performance of this device is payed with increased complexity in the control. In this work we report about advances in the AO system control obtained with SOULat the Large Binocular Telescope. The first is an improved Tip/Tilt temporal control able to recover the nominal correction even in presence of high temporal frequency resonances. The second one is a modal gain optimization that has been successfully tested on sky for the first time. Pyramid wavefront sensors are the key technology for the first light AO systems of all ELTs and the reported advances can be relevant contributions for such systems.

astro-ph.IM↗

arXiv2021

Towards Realistic Modeling of the Astrometric Capabilities of MCAO Systems: Detecting an Intermediate Mass Black Hole with MAVIS

Accurate astrometry is a key deliverable for the next generation of multi-conjugate adaptive optics (MCAO) systems. The MCAO Visible Imager and Spectrograph (MAVIS) is being designed for the Very Large Telescope Adaptive Optics Facility and must achieve 150 $μ$as astrometric precision (50 $μ$as goal). To test this before going on-sky, we have created MAVISIM, a tool to simulate MAVIS images. MAVISIM accounts for three major sources of astrometric error, high- and low-order point spread function (PSF) spatial variability, tip-tilt residual error and static field distortion. When exploring the impact of these three error terms alone, we recover an astrometric accuracy of 50 $μ$as for all stars brighter than $m=19$ in a 30s integration using PSF-fitting photometry. We also assess the feasibility of MAVIS detecting an intermediate mass black hole (IMBH) in a Milky Way globular cluster. We use an N-body simulation of an NGC 3201-like cluster with a central 1500 M$_{\odot}$ IMBH as input to MAVISIM and recover the velocity dispersion profile from proper motion measurements. Under favourable astrometric conditions, the dynamical signature of the IMBH is detected with a precision of ~0.20 km/s in the inner ~4" of the cluster where HST is confusion-limited. This precision is comparable to measurements made by Gaia, HST and MUSE in the outer ~60" of the cluster. This study is the first step towards building a science-driven astrometric error budget for an MCAO system and a prediction of what MAVIS could do once on sky.

astro-ph.GA↗

arXiv2021

MAORY: A Multi-conjugate Adaptive Optics RelaY for ELT

MAORY is the adaptive optics module for ELT providing two gravity invariant ports with the same optical quality for two different client instruments. It enable high angular resolution observations in the near infrared over a large field of view (~1 arcmin2 ) by real time compensation of the wavefront distortions due to atmospheric turbulence. Wavefront sensing is performed by laser and natural guide stars while the wavefront sensor compensation is performed by an adaptive deformable mirror in MAORY which works together with the telescope's adaptive and tip tilt mirrors M4 and M5 respectively.

astro-ph.IM↗

arXiv2021

Bringing SOUL on sky

The SOUL project is upgrading the 4 SCAO systems of LBT, pushing the current guide star limits of about 2 magnitudes fainter thanks to Electron Multiplied CCD detector. This improvement will open the NGS SCAO correction to a wider number of scientific cases from high contrast imaging in the visible to extra-galactic source in the NIR. The SOUL systems are today the unique case where pyramid WFS, adaptive secondary and EMCCD are used together. This makes SOUL a pathfinder for most of the ELT SCAO systems like the one of GMT, MICADO and HARMONI of E-ELT, where the same key technologies will be employed. Today we have 3 SOUL systems installed on the telescope in commissioning phase. The 4th system will be installed in a few months. We will present here the results achieved during daytime testing and commissioning nights up to the present date.

astro-ph.IM↗

arXiv2021

TIPTOP: a new tool to efficiently predict your favorite AO PSF

The Adaptive Optics (AO) performance significantly depends on the available Natural Guide Stars (NGSs) and a wide range of atmospheric conditions (seeing, Cn2, windspeed,...). In order to be able to easily predict the AO performance, we have developed a fast algorithm - called TIPTOP - producing the expected AO Point Spread Function (PSF) for any of the existing AO observing modes (SCAO, LTAO, MCAO, GLAO), and any atmospheric conditions. This TIPTOP tool takes its roots in an analytical approach, where the simulations are done in the Fourier domain. This allows to reach a very fast computation time (few seconds per PSF), and efficiently explore the wide parameter space. TIPTOP has been developed in Python, taking advantage of previous work developed in different languages, and unifying them in a single framework. The TIPTOP app is available on GitHub at: https://github.com/FabioRossiArcetri/TIPTOP, and will serve as one of the bricks for the ELT Exposure Time Calculator.

astro-ph.IM↗

arXiv2020

Adaptive optics design status of MAORY, the MCAO system of European ELT

MAORY is the Multi-conjugate Adaptive Optics RelaY for the European ELT aimed at providing a 1 arcmin corrected field to MICADO, a near-infrared spectro-imager with a focus on astrometry. In this paper we re-view the main requirements and analysis that justify the current adaptive optics architecture and subsystem requirements. We discuss the wavefront error budget allocation focusing on the worst offenders terms and on a statistical analysis of their dependence on atmospheric and sodium profiles. We present an updated revision of the trade-off studies on the main AO parameters that, along with considerations coming from optical and mechanical subsystems, are used to define the preliminary design of the instrument.

astro-ph.IM↗

arXiv2020

EMCCD for Pyramid wavefront sensor: laboratory characterization

Electro-Multiplying CCDs offer a unique combination of speed, sub-electron noise and quantum efficiency. These features make them extremely attractive for astronomical adaptive optics. The SOUL project selected the Ocam2k from FLI as camera upgrade for the pyramid wavefront sensor of the LBT SCAO systems. Here we present results from the laboratory characterization of the 3 of the custom Ocam2k cameras for the SOUL project. The cameras showed very good noise ($0.4e^-$ and $0.4-0.7e^-$ for binned modes) and dark current values ($1.5e^-$). We measured the camera gain and identified the dependency on power cycle and frame rate. Finally, we estimated the impact of these gain variation in the SOUL adaptive optics system. The impact on the SOUL performance resulted to be negligible.

astro-ph.IM↗

arXiv2020

MAVIS: system modelling and performance prediction

The MCAO Assisted Visible Imager and Spectrograph (MAVIS) Adaptive Optics Module has very demanding goals to support science in the optical: providing 15% SR in V band on a large FoV of 30arcsec diameter in standard atmospheric conditions at Paranal. It will be able to work in closed loop on up to three natural guide stars down to H=19, providing a sky coverage larger than 50% in the south galactic pole. Such goals and the exploration of a large MCAO system parameters space have required a combination of analytical and end- to-end simulations to assess performance, sky coverage and drive the design. In this work we report baseline performance, statistical sky coverage and parameters sensitivity analysis done in the phase-A instrument study.

astro-ph.IM↗

arXiv2020

MAORY AO performances

The Multi-conjugate Adaptive Optics RelaY (MAORY) should provide 30% SR in K band (50% goal) on half of the sky at the South Galactic Pole. Assessing its performance and the sensitivity to parameter variations during the design phase is a fundamental step for the engineering of such a complex system. This step, centered on numerical simulations, is the connection between the performance requirements and the Adaptive Optics system configuration. In this work we present MAORY configuration and performance and we justify theAdaptive Optics system design choices.

astro-ph.IM↗

arXiv2020

XAO-assisted coronagraphy with SHARK NIR: from simulations to laboratory tests

Several Extreme Adaptive Optics (XAO) systems dedicated to the detection and characterisation of the exoplanets are currently in operation for 8-10 meter class telescopes. Coronagraphs are commonly used in these facilities to reject the diffracted light of an observed star and enable direct imaging and spectroscopy of its circumstellar environment. SHARK-NIR is a coronagraphic camera that will be implemented at the Large Binocular Telescope (LBT). After an extensive simulation campaign, SHARK-NIR team selected a suite of coronagraphic techniques to be implemented in the instrument in order to fulfil the scientific requirements. In summary, the Gaussian Lyot coronagraph is the option to serve all those science cases requiring field-stabilization and moderate contrast. Observations in pupil-stabilized mode to search for exoplanets can take advantage of three Shaped Pupil masks (SPC) and a Four-Quadrant Phase Mask (FQPM) coronagraph. The SPC are designed for high contrast on a small field close to the star and are robust to image and pupil jitter. The FQPM allows to access the entire scientific FoV (18''x18'') and delivers excellent performance in ideal conditions (high Strehl ratios), but performance is still good, both close and further away from the star, even at lower Strehl and with moderate vibrations. After the procurement phase, the coronagraphic masks were delivered to our labs and we started to test their performance on the optical bench and define the alignment procedures that will be employed in the final integration of the instrument in our cleaning room. In this article, we describe the tests that we performed in the lab with SHARK-NIR coronagraphs. We measured the contrast achievable with each technique in very-high Strehl conditions and defined the alignment-integration procedures.

astro-ph.IM↗

arXiv2019

Elephants, goldfishes and SOUL: a dissertation on forgetfulness and control systems

Adaptive Optics control systems accumulate differential measurements during closed loop operations to estimate turbulence and drive the deformable mirror. But have you ever wondered if your control system should be like an elephant, and never forget, or should it have a weak memory like a goldfish? Are measurement errors always zero mean or does static effects impact performance? Are commands high spatial frequencies good or are you wasting all the inter-actuator stroke for nothing? This work will try to answer these questions showing you results obtained during SOUL commissioning and analysing the impact of the values of the control system poles on Adaptive Optics. So be prepared to focus on forgetfulness and discover the advantages of being a goldfish in a digital world made of elephants.

astro-ph.IM↗

arXiv2018

ERIS: revitalising an adaptive optics instrument for the VLT

ERIS is an instrument that will both extend and enhance the fundamental diffraction limited imaging and spectroscopy capability for the VLT. It will replace two instruments that are now being maintained beyond their operational lifetimes, combine their functionality on a single focus, provide a new wavefront sensing module that makes use of the facility Adaptive Optics System, and considerably improve their performance. The instrument will be competitive with respect to JWST in several regimes, and has outstanding potential for studies of the Galactic Center, exoplanets, and high redshift galaxies. ERIS had its final design review in 2017, and is expected to be on sky in 2020. This contribution describes the instrument concept, outlines its expected performance, and highlights where it will most excel.

astro-ph.IM↗

arXiv2016

Sparse aperture differential piston measurements using the pyramid wave-front sensor

In this paper we report on the laboratory experiment we settled in the Shanghai Astronomical Observatory (SHAO) to investigate the pyramid wavefront sensor (WFS) ability to measure the differential piston on a sparse aperture. The ultimate goal is to verify the ability of the pyramid WFS work in closed loop to perform the phasing of the primary mirrors of a sparse Fizeau imaging telescope. In the experiment we installed on the optical bench we performed various test checking the ability to flat the wave-front using a deformable mirror and to measure the signal of the differential piston on a two pupils setup. These steps represent the background from which we start to perform full closed loop operation on multiple apertures. These steps were also useful to characterize the achromatic double pyramids (double prisms) manufactured in the SHAO optical workshop.

astro-ph.IM↗

arXiv2016

The numerical simulation tool for the MAORY multiconjugate adaptive optics system

The Multiconjugate Adaptive Optics RelaY (MAORY) is and Adaptive Optics module to be mounted on the ESO European-Extremely Large Telescope (E-ELT). It is a hybrid Natural and Laser Guide System that will perform the correction of the atmospheric turbulence volume above the telescope feeding the Multi-AO Imaging Camera for Deep Observations Near Infrared spectro-imager (MICADO). We developed an end-to-end Monte- Carlo adaptive optics simulation tool to investigate the performance of a the MAORY and the calibration, acquisition, operation strategies. MAORY will implement Multiconjugate Adaptive Optics combining Laser Guide Stars (LGS) and Natural Guide Stars (NGS) measurements. The simulation tool implements the various aspect of the MAORY in an end to end fashion. The code has been developed using IDL and uses libraries in C++ and CUDA for efficiency improvements. Here we recall the code architecture, we describe the modeled instrument components and the control strategies implemented in the code.

astro-ph.IM↗

arXiv2012

The Actuator Design and the Experimental Tests of a New Technology Large Deformable Mirror for Visible Wavelengths Adaptive Optics

Recently, Adaptive Secondary Mirrors showed excellent on-sky results in the Near Infrared wavelengths. They currently provide 30mm inter-actuator spacing and about 1 kHz bandwidth. Pushing these devices to be operated at visible wavelengths is a challenging task. Compared to the current systems, working in the infrared, the more demanding requirements are the higher spatial resolution and the greater correction bandwidth. In fact, the turbulence scale is shorter and the parameter variation is faster. Typically, the former is not larger than 25 mm (projected on the secondary mirror) and the latter is 2 kHz, therefore the actuator has to be more slender and faster than the current ones. With a soft magnetic composite core, a dual-stator and a single-mover, VRALA, the actuator discussed in this paper, attains unprecedented performances with a negligible thermal impact. Pre-shaping the current required to deliver a given stroke greatly simplifies the control system, whose output supplies the current generator. As the inductance depends on the mover position, the electronics of this generator, provided with an inductance measure circuit, works also as a displacement sensor, supplying the control system with an accurate feed-back signal. A preliminary prototype, built according to the several FEA thermo-magnetic analyses, has undergone some preliminary laboratory tests. The results of these checks, matching the design results in terms of power and force, show that the the magnetic design addresses the severe specifications.

astro-ph.IM↗

arXiv2012

The Gray Needle: Large Grains in the HD 15115 Debris Disk from LBT/PISCES/Ks and LBTI/LMIRcam/L' Adaptive Optics Imaging

We present diffraction-limited \ks band and \lprime adaptive optics images of the edge-on debris disk around the nearby F2 star HD 15115, obtained with a single 8.4 m primary mirror at the Large Binocular Telescope. At \ks band the disk is detected at signal-to-noise per resolution element (SNRE) \about 3-8 from \about 1-2\fasec 5 (45-113 AU) on the western side, and from \about 1.2-2\fasec 1 (63-90 AU) on the east. At \lprime the disk is detected at SNRE \about 2.5 from \about 1-1\fasec 45 (45-90 AU) on both sides, implying more symmetric disk structure at 3.8 \microns . At both wavelengths the disk has a bow-like shape and is offset from the star to the north by a few AU. A surface brightness asymmetry exists between the two sides of the disk at \ks band, but not at \lprime . The surface brightness at \ks band declines inside 1\asec (\about 45 AU), which may be indicative of a gap in the disk near 1\asec. The \ks - \lprime disk color, after removal of the stellar color, is mostly grey for both sides of the disk. This suggests that scattered light is coming from large dust grains, with 3-10 \microns -sized grains on the east side and 1-10 \microns dust grains on the west. This may suggest that the west side is composed of smaller dust grains than the east side, which would support the interpretation that the disk is being dynamically affected by interactions with the local interstellar medium.

astro-ph.SR↗

arXiv2012

First Light LBT AO Images of HR 8799 bcde at 1.65 and 3.3 Microns: New Discrepancies between Young Planets and Old Brown Dwarfs

As the only directly imaged multiple planet system, HR 8799 provides a unique opportunity to study the physical properties of several planets in parallel. In this paper, we image all four of the HR 8799 planets at H-band and 3.3 microns with the new LBT adaptive optics system, PISCES, and LBTI/LMIRCam. Our images offer an unprecedented view of the system, allowing us to obtain H and 3.3$ micron photometry of the innermost planet (for the first time) and put strong upper-limits on the presence of a hypothetical fifth companion. We find that all four planets are unexpectedly bright at 3.3 microns compared to the equilibrium chemistry models used for field brown dwarfs, which predict that planets should be faint at 3.3 microns due to CH4 opacity. We attempt to model the planets with thick-cloudy, non-equilibrium chemistry atmospheres, but find that removing CH4 to fit the 3.3 micron photometry increases the predicted L' (3.8 microns) flux enough that it is inconsistent with observations. In an effort to fit the SED of the HR 8799 planets, we construct mixtures of cloudy atmospheres, which are intended to represent planets covered by clouds of varying opacity. In this scenario, regions with low opacity look hot and bright, while regions with high opacity look faint, similar to the patchy cloud structures on Jupiter and L/T transition brown-dwarfs. Our mixed cloud models reproduce all of the available data, but self-consistent models are still necessary to demonstrate their viability.

astro-ph.EP↗