SearcharxivSearch

arXiv subjects

Guillaume Agnus

Publications and source records attributed to Guillaume Agnus.

12 recordsLinked to original sources

Magneto-optical properties of textured La$_{2/3}$Sr$_{1/3}$MnO$_3$ thin films integrated on silicon via a Ca$_2$Nb$_3$O$_{10}$ nanosheet layer

We demonstrate the possibility of growing textured La$_{2/3}$Sr$_{1/3}$MnO$_3$ (LSMO) thin films on silicon substrates with magneto-optical and optical properties comparable to high-quality epitaxial layers grown on bulk SrTiO$_3$ (STO). The pulsed laser deposition growth of LSMO is achieved by a two-dimensional nanosheet (NS) seed layer of Ca$_2$Nb$_3$O$_{10}$ (CNO) inducing epitaxial stabilization of LSMO films. The resulting layers possess a higher Curie temperature and a lower overall magnetization than samples of LSMO on STO. Spectra of the full permittivity tensor were calculated from optical and magneto-optical measurements. Spectral dependencies of both the diagonal and off-diagonal elements share many similarities between the LSMO/NS/Si and LSMO/STO samples. These similarities indicate comparable electronic structures of the layers and demonstrate comparable optical quality of textured LSMO on NS/Si and epitaxial LSMO on STO.

cond-mat.mtrl-sci

Universal Fabrication of Two-Dimensional Electron Systems in Functional Oxides

Two-dimensional electron systems (2DESs) in functional oxides are promising for applications, but their fabrication and use, essentially limited to SrTiO$_3$-based heterostructures, are hampered by the need of growing complex oxide over-layers thicker than 2~nm using evolved techniques. This work shows that thermal deposition of a monolayer of an elementary reducing agent suffices to create 2DESs in numerous oxides.

cond-mat.str-el

Stress measurements in silicon photonics by integrated Raman spectroscopy

Complex 3D integration of photonic and electronic integrated circuits is of particular interest to carry the photonics roadmap and to address challenges but involves mechanical stress, often detrimental for the behavior of optical components. Existing experiments failed to carefully analyze the stress in such integrated optical devices due to the requirement in terms of feature sizes, few hundreds of nanometers, and 3D-stacked integration. We present for the first time the characterization of the stress tensor of a silicon waveguide using Integrated Raman Spectroscopy (IRS). This experimental technique is directly sensitive to the effective stress, which involves changes in optical properties of the guided mode, at the working wavelength and polarization state of the photonic component. The experimental stress tensor is in good agreement with simulations.

physics.app-ph

Highly anisotropic magnetic domain wall behavior in-plane magnetic films

We have studied nucleation of magnetic domains and propagation of magnetic domain walls (DWs) induced by pulsed magnetic field in a ferromagnetic film with in-plane uniaxial anisotropy. Different from what have been seen up to now in out-of-plane anisotropy films, the nucleated domains have a rectangular shape in which a pair of the opposite sides are perfectly linear DWs, while the other pair present zigzags. This can be explained by magnetostatic optimization, knowing that the pulse field is applied parallel to the easy magnetization axis. The field induced propagation of these two DW types are very different. The linear ones follow a creep law identical to what is usually observed in out-of-plane films, when the velocity of zigzag DWs depends linearly on the applied field amplitude down to very low field. This most unusual feature can be explained by the shape of the DW, which makes it possible to go round the pinning defects. Thanks to that, it seems that propagation of zigzag walls agrees with the 1D model, and these results provide a first experimental evidence of the 1D model relevance in two dimensional ferromagnetic thin films. Let's note that it is the effective DW width parallel to DW propagation direction that matters in the 1D model formula, which is a relevant change when dealing with zigzag DWs.

cond-mat.mtrl-sci

Magnetic domain wall motion in SrRuO$_3$ thin films

Influence of substrate miscut on magnetization dynamics in SrRuO$_3$ (SRO) thin films was studied. Two films were grown on SrTiO$_3$ substrates with high ($\sim1^{\circ}$) and low ($\sim0.1^{\circ}$) miscut angles, respectively. As expected, high miscut angle leads to suppression of multi-variant growth. By means of SQUID magnetometry, comparable relaxation effects were observed in both the multi-variant and the nearly single-variant sample. Differences in the magnetization reversal process were revealed by magnetic force microscopy. It showed that the multi-variant growth leads to higher density of defects acting as pinning or nucleation sites for magnetic domains, which consequently results in deterioration of magnetic properties. It was demonstrated that the use of high miscut substrate is important for fabrication of high quality SRO thin films with low density of crystallographic defects and excellent magnetic properties.

cond-mat.mtrl-sci

Magneto-ionic control of spin polarization in magnetic tunnel junctions

Magnetic tunnel junctions (MTJs) with Hf0.5Zr0.5O2 barriers are reported to show both tunneling magnetoresistance effect (TMR) and tunneling electroresistance effect (TER), displaying four resistance states by magnetic and electric field switching. Here we show that, under electric field cycling of large enough magnitude, the TER can reach values as large as 10^6%. Moreover, concomitant with this TER enhancement, the devices develop electrical control of spin polarization, with sign reversal of the TMR effect. Currently, this intermediate state exists for a limited number of cycles and understanding the origin of these phenomena is key to improve its stability. The experiments presented here point to the magneto-ionic effect as the origin of the large TER and strong magneto-electric coupling, showing that ferroelectric polarization switching of the tunnel barrier is not the main contribution.

cond-mat.mtrl-sci

Magnetic tunnel junctions based on ferroelectric Hf0.5Zr0.5O2 tunnel barriers

A ferroelectric tunnel barrier in between two ferromagnetic electrodes (multiferroic tunnel junction, MFTJ), is one of the most promising concepts for future microelectronic devices. In parallel, Hafnia based ferroelectrics are showing great potential for device miniaturization down to the nanoscale. Here we utilize ferroelectric Hf0.5Zr0.5O2 (HZO) with thickness of only 2 nm, epitaxially grown on La0.7Sr0.3MnO3 (LSMO) ferromagnetic electrodes, as a large band-gap insulating barrier integrated in MFTJs with cobalt top electrodes. As previously reported for other MFTJs with similar electrodes, the tunneling magnetoresistance (TMR) can be tuned and its sign can even be reversed by the bias voltage across the junction. We demonstrate four non-volatile resistance states generated by magnetic and electric field switching with high reproducibility in this system.

physics.app-ph

Domain Wall Motion Driven by Laplace Pressure in CoFeB-MgO Nanodots with Perpendicular Anisotropy

We have studied the magnetization reversal of CoFeB-MgO nanodots with perpendicular anisotropy for size ranging from w=400 nm to 1 μm. Contrary to previous experiments, the switching field distribution is shifted toward lower magnetic fields as the size of the elements is reduced with a mean switching field varying as 1/w. We show that this mechanism can be explained by the nucleation of a pinned magnetic domain wall (DW) at the edges of the nanodots where damages are introduced by the patterning process. As the surface tension (Laplace pressure) applied on the DW increases when reducing the size of the nanodots, we demonstrate that the depinning field to reverse the entire elements varies as 1/w. These results suggest that the presence of DWs has to be considered in the switching process of nanoscale elements and open a path toward scalable spintronic devices.

physics.app-ph

Heterogeneous Memristive Devices Enabled by Magnetic Tunnel Junction Nanopillars Surrounded by Resistive Silicon Switches

Emerging non-volatile memories (NVMs) have currently attracted great interest for their potential applications in advanced low-power information storage and processing technologies. Conventional NVMs, such as magnetic random access memory (MRAM) and resistive random access memory (RRAM) suffer from limitations of low tunnel magnetoresistance (TMR), low access speed or finite endurance. NVMs with synergetic advantages are still highly desired for future computer architectures. Here, we report a heterogeneous memristive device composed of a magnetic tunnel junction (MTJ) nanopillar surrounded by resistive silicon switches, named resistively enhanced MTJ (Re-MTJ), that may be utilized for novel memristive memories, enabling new functionalities that are inaccessible for conventional NVMs. The Re-MTJ device features a high ON/OFF ratio of >1000% and multilevel resistance behaviour by combining magnetic switching together with resistive switching mechanisms. The magnetic switching originates from the MTJ, while the resistive switching is induced by a point-switching filament process that is related to the mobile oxygen ions. Microscopic evidence of silicon aggregated as nanocrystals along the edges of the nanopillars verifies the synergetic mechanism of the heterogeneous memristive device. This device may provide new possibilities for advanced memristive memory and computing architectures, e.g., in-memory computing and neuromorphics.

physics.app-ph

Universal domain wall dynamics under electric field in Ta/CoFeB/MgO devices with perpendicular anisotropy

Electric field effects in ferromagnetic/oxide dielectric structures provide a new route to control domain wall (DW) dynamics with low power dissipation. However, electric field effects on DW velocities have only been observed so far in the creep regime where DW velocities are low due to strong interactions with pinning sites. Here, we show gate voltage modulation of DW velocities ranging from the creep to the flow regime in Ta/Co40Fe40B20/MgO/TiO2 structures with perpendicular magnetic anisotropy. We demonstrate a universal description of the role of applied electric fields in the various pinning dependent regimes by taking into account an effective magnetic field being linear with the electric field. In addition, the electric field effect is found to change sign in the Walker regime. Our work opens new opportunities for the study and optimization of electric field effect at ferromagnetic metal/insulator interfaces.

cond-mat.mtrl-sci

Interfacial charge accumulation effect on magnetic domain wall nucleation and propagation in a Pt/Co/Pt/Al2O3 structure

We report direct observation of charge accumulation effect on magnetization reversal in a Pt/Co(0.5 nm)/Pt(0.5 nm)/Al2O3 structure with perpendicular anisotropy. By imaging magnetic domain with polar Kerr microscopy, we evidence that positive charges accumulating at the Pt/Al2O3 interface result in favoring magnetic domain wall propagation, while negative charges hinder domain wall nucleation and propagation. Our results suggest that magnetic properties in Co layer can be strongly influenced by 5d electron accumulation/depletion in an ultrathin Pt layer.

cond-mat.mtrl-sci

Electric field control of domain wall logic in piezoelec-tric/ferromagnetic nanodevices

Power dissipation is one of the most important factors limiting the future miniaturisation of integrated circuits. The capability of controlling magnetic states with a low voltage through magnetoelectric coupling in magnetostrictive/piezoelectric systems may pave the way toward ultra low-power electronics. Although the former effect has been demon-strated in several multiferroic heterostructures, the incorporation of such complex geometries into practical magnetic memory and logic nanodevices has been lacking. Here, we demonstrate the room temperature control of a domain wall gate with an electric field in a nanowire consisting of a laterally polarized piezoelectric bar inducing a giant strain in a ferromagnetic spin-valve. We propose to use such novel domain wall gate as an elementary brick to generate a complete set of boolean logic functions or stabilize domain walls in high density memory applications.

cond-mat.mtrl-sci