arXiv subjects

Guillaume Ducoffe

Publications and source records attributed to Guillaume Ducoffe.

At least 19 recordsLinked to original sources

arXiv2026

Beyond Trees: The Weighted Center Problem on Gromov Hyperbolic Graphs

The Weighted Center} problem takes as its input a graph $G=(V,E)$ together with a profile $π$ such that every vertex $v$ is mapped to some nonnegative multiplicative weight $π(v)$. Its output must be some vertex $c$ minimizing $\max\{π(v)d_G(c,v) : v \in V\}$. The classic Center problem corresponds to the case where $π(v) =1$ for every vertex $v$. In the literature, various almost linear-time algorithms have been proposed for the Center problem on some well-structured classes of graphs. By contrast, similarly efficient algorithms for the Weighted Center problem have been scarce. We investigate how the Gromov hyperbolicity, alone or in combination with other metric and geometric properties on graphs, can be used in the design of exact and approximate almost linear-time algorithms for the Weighted Center problem. In particular, we derive almost optimal algorithms for the following well-studied classes of graphs: chordal graphs, distance-hereditary graphs (both in $\mathcal{O}(m)$ time), dually chordal graphs and chordal bipartite graphs (both in $\mathcal{O}(m\log{n})$ time).

cs.DS↗

arXiv2026

A fine-grained dichotomy for the center problem on Gromov hyperbolic graphs

A vertex in a graph is called central if it minimizes its maximum distance to the other vertices. The radius of a graph $G$ is the largest distance between a central vertex and the other vertices, and it is denoted by $rad(G)$. In the center problem, we are asked to find a central vertex. We study the fine-grained complexity of the center problem on graphs with small Gromov hyperbolicity. Roughly, the Gromov hyperbolicity of a graph represents how close, locally, it is to a tree, from a metric point of view. It has applications in the design of approximation algorithms. In particular, there is a linear-time algorithm that for every $δ$-hyperbolic graph $G$ outputs some vertex at distance at most $rad(G) + 5δ$ to the other vertices [Chepoi et al, SoCG'08]. However, a linear-time algorithm for computing a central vertex is known only for $0$-hyperbolic graphs, whereas its existence was ruled out for $2$-hyperbolic graphs under the Hitting Set Conjecture of [Abboud et al, SODA'16]. Our main contribution in the paper is a linear-time algorithm for computing a central vertex in the class of $\frac 1 2$-hyperbolic graphs. Furthermore, we rule out the existence of such an algorithm for $1$-hyperbolic graphs, under the Hitting Set Conjecture, thus completely settling all the cases left open.

cs.DS↗

arXiv2026

$α_i$-Metric Graphs: Hyperbolicity

A graph is called $α_i$-metric ($i \in {\cal N}$) if it satisfies the following $α_i$-metric property for every vertices $u, w, v$ and $x$: if a shortest path between $u$ and $w$ and a shortest path between $x$ and $v$ share a terminal edge $vw$, then $d(u,x) \ge d(u,v) + d(v,x) - i$. The latter is a discrete relaxation of the property that in Euclidean spaces the union of two geodesics sharing a terminal segment must be also a geodesic. Recently in (Dragan & Ducoffe, WG'23) we initiated the study of the algorithmic applications of $α_i$-metric graphs. Our results in this prior work were very similar to those established in (Chepoi et al., SoCG'08) and (Chepoi et al., COCOA'18) for graphs with bounded hyperbolicity. The latter is a heavily studied metric tree-likeness parameter first introduced by Gromov. In this paper, we clarify the relationship between hyperbolicity and the $α_i$-metric property, proving that $α_i$-metric graphs are $f(i)$-hyperbolic for some function $f$ linear in $i$. We give different proofs of this result, using various equivalent definitions to graph hyperbolicity. By contrast, we give simple constructions of $1$-hyperbolic graphs that are not $α_i$-metric for any constant $i$. Finally, in the special case of $i=1$, we prove that $α_1$-metric graphs are $1$-hyperbolic, and the bound is sharp. By doing so, we can answer some questions left open in (Dragan & Ducoffe, WG'23).

math.CO↗

arXiv2026

Certificates in P and Subquadratic-Time Computation of Radius, Diameter, and all Eccentricities in Graphs

In the context of fine-grained complexity, we investigate the notion of certificate enabling faster polynomial-time algorithms. We specifically target radius (minimum eccentricity), diameter (maximum eccentricity), and all-eccentricity computations for which quadratic-time lower bounds are known under plausible conjectures. In each case, we introduce a notion of certificate as a specific set of nodes from which appropriate bounds on all eccentricities can be derived in subquadratic time when this set has sublinear size. The existence of small certificates for radius, diameter and all eccentricities is a barrier against SETH-based lower bounds for these problems. We indeed prove that for graph classes with certificates of bounded size, there exist randomized subquadratic-time algorithms for computing the radius, the diameter, and all eccentricities respectively. Moreover, these notions of certificates are tightly related to algorithms probing the graph through one-to-all distance queries and allow to explain the efficiency of practical radius and diameter algorithms from the literature. In particular, our formalization enables a novel primal-dual analysis of a classical approach for diameter computation. Based on our novel insights for these problems, we introduce several new algorithmic techniques related to eccentricity computation and propose algorithms for radius, diameter and all eccentricities with theoretical guarantees with respect to certain graph parameters. This is complemented by experimental results on various types of real-world graphs showing that these parameters appear to be low in practice. Finally, we obtain refined results in the case where the input graph is a power-law random graph, has low doubling dimension, has low hyperbolicity, is chordal, satisfies some Helly-type property, or has bounded asteroidal number.

cs.DM↗

arXiv2026

Complexity Gaps between Point and Interval Temporal Graphs for some Reachability Problems

Temporal graphs arise when modeling interactions that evolve over time. They usually come in several flavors, depending on the number of parameters used to describe the temporal aspects of the interactions: time of appearance, duration, delay of transmission. In the point model, edges appear at specific points in time, whereas in the more general interval model, edges can be present over specific time intervals. In both models, the delay for traversing an edge can change with each edge appearance. When time is discrete, the two models are equivalent in the sense that the presence of an edge during an interval is equivalent to a sequence of point-in-time occurrences of the edge. However, this transformation can drastically change the size of the input and has implications for complexity. Indeed, we show a gap between the two models with respect to the complexity of the classical problem of computing a fastest temporal path from a source vertex to a target vertex, i.e. a path where edges can be traversed one after another in time and such that the total duration from source to target is minimized. It can be solved in near-linear time in the point model, while we show that the interval model requires quadratic time under classical assumptions of fine-grained complexity. With respect to linear time, our lower bound implies a factor of the number of vertices, while the best known algorithm has a factor of the number of underlying edges. We also show a similar complexity gap for computing a shortest temporal path, i.e. a temporal path with a minimum number of edges. Here our lower bound matches known upper bounds up to a logarithmic factor. Interestingly, we show that near-linear time for fastest temporal path computation is possible in the interval model when it is restricted to uniform delay zero, i.e., when traversing an edge is instantaneous. However, this special case is not exempt from our lower bound for shortest temporal path computation. These two results should be contrasted with the computation of a foremost temporal path, i.e., a temporal path that arrives as early as possible. It is well known that this computation can be solved in near-linear time in both models. We also show that there is no gap in testing the all-to-all temporal connectivity of a temporal graph. We demonstrate a quadratic lower bound that applies to both the interval and point models and aligns with the existing upper bounds.

cs.DS↗

arXiv2025

On $G^p$-unimodality of radius functions in graphs: structure and algorithms

For every weight assignment $π$ to the vertices in a graph $G$, the radius function $r_π$ maps every vertex of $G$ to its largest weighted distance to the other vertices. The center problem asks to find a center, i.e., a vertex of $G$ that minimizes $r_π$. We here study some local properties of radius functions in graphs, and their algorithmic implications; our work is inspired by the nice property that in Euclidean spaces every local minimum of every radius function $r_π$ is a center. We study a discrete analogue of this property for graphs, which we name $G^p$-unimodality: specifically, every vertex that minimizes the radius function in its ball of radius $p$ must be a central vertex. While it has long been known since Dragan (1989) that graphs with $G$-unimodal radius functions $r_π$ are exactly the Helly graphs, the class of graphs with $G^2$-unimodal radius functions has not been studied insofar. We prove the latter class to be much larger than the Helly graphs, since it also comprises (weakly) bridged graphs, graphs with convex balls, and bipartite Helly graphs. Recently, using the $G$-unimodality of radius functions $r_π$, a randomized $\widetilde{\mathcal{O}}(\sqrt{n}m)$-time local search algorithm for the center problem on Helly graphs was proposed by Ducoffe (2023). Assuming the Hitting Set Conjecture (Abboud et al., 2016), we prove that a similar result for the class of graphs with $G^2$-unimodal radius functions is unlikely. However, we design local search algorithms (randomized or deterministic) for the center problem on many of its important subclasses.

cs.DS↗

arXiv2024

Bow Metrics and Hyperbolicity

A ($λ,μ$)-bow metric was defined in (Dragan & Ducoffe, 2023) as a far reaching generalization of an $α_i$-metric (which is equivalent to a ($0,i$)-bow metric). A graph $G=(V,E)$ is said to satisfy ($λ,μ$)-bow metric if for every four vertices $u,v,w,x$ of $G$ the following holds: if two shortest paths $P(u,w)$ and $P(v,x)$ share a common shortest subpath $P(v,w)$ of length more than $λ$ (that is, they overlap by more than $λ$), then the distance between $u$ and $x$ is at least $d_G(u,v)+d_G(v,w)+d_G(w,x)-μ$. ($λ,μ$)-Bow metric can also be considered for all geodesic metric spaces. It was shown by Dragan & Ducoffe that every $δ$-hyperbolic graph (in fact, every $δ$-hyperbolic geodesic metric space) satisfies ($δ, 2δ$)-bow metric. Thus, ($λ,μ$)-bow metric is a common generalization of hyperbolicity and of $α_i$-metric. In this paper, we investigate an intriguing question whether ($λ,μ$)-bow metric implies hyperbolicity in graphs. Note that, this is not the case for general geodesic metric spaces as Euclidean spaces satisfy ($0,0$)-bow metric whereas they have unbounded hyperbolicity. We conjecture that, in graphs, ($λ,μ$)-bow metric indeed implies hyperbolicity and show that our conjecture is true for several large families of graphs.

math.CO↗

arXiv2024

Quasilinear-time eccentricities computation, and more, on median graphs

Computing the diameter, and more generally, all eccentricities of an undirected graph is an important problem in algorithmic graph theory and the challenge is to identify graph classes for which their computation can be achieved in subquadratic time. Using a new recursive scheme based on the structural properties of median graphs, we provide a quasilinear-time algorithm to determine all eccentricities for this well-known family of graphs. Our recursive technique manages specifically balanced and unbalanced parts of the $Θ$-class decomposition of median graphs. The exact running time of our algorithm is O(n log^4 n). This outcome not only answers a question asked by B{é}n{é}teau et al. (2020) but also greatly improves a recent result which presents a combinatorial algorithm running in time O(n^1.6408 log^{O(1)} n) for the same problem.Furthermore we also propose a distance oracle for median graphs with both polylogarithmic size and query time. Speaking formally, we provide a combinatorial algorithm which computes for any median graph G, in quasilinear time O(n log^4 n), vertex-labels of size O(log^3 n) such that any distance of G can be retrieved in time O(log^4 n) thanks to these labels.

cs.DS↗

arXiv2024

Practical Computation of Graph VC-Dimension

For any set system $H=(V,R), \ R \subseteq 2^V$, a subset $S \subseteq V$ is called \emph{shattered} if every $S' \subseteq S$ results from the intersection of $S$ with some set in $\R$. The \emph{VC-dimension} of $H$ is the size of a largest shattered set in $V$. In this paper, we focus on the problem of computing the VC-dimension of graphs. In particular, given a graph $G=(V,E)$, the VC-dimension of $G$ is defined as the VC-dimension of $(V, \mathcal N)$, where $\mathcal N$ contains each subset of $V$ that can be obtained as the closed neighborhood of some vertex $v \in V$ in $G$. Our main contribution is an algorithm for computing the VC-dimension of any graph, whose effectiveness is shown through experiments on various types of practical graphs, including graphs with millions of vertices. A key aspect of its efficiency resides in the fact that practical graphs have small VC-dimension, up to 8 in our experiments. As a side-product, we present several new bounds relating the graph VC-dimension to other classical graph theoretical notions. We also establish the $W[1]$-hardness of the graph VC-dimension problem by extending a previous result for arbitrary set systems.

cs.DS↗

arXiv2023

$α_i$-Metric Graphs: Radius, Diameter and all Eccentricities

We extend known results on chordal graphs and distance-hereditary graphs to much larger graph classes by using only a common metric property of these graphs. Specifically, a graph is called $α_i$-metric ($i\in \mathcal{N}$) if it satisfies the following $α_i$-metric property for every vertices $u,w,v$ and $x$: if a shortest path between $u$ and $w$ and a shortest path between $x$ and $v$ share a terminal edge $vw$, then $d(u,x)\geq d(u,v) + d(v,x)-i$. Roughly, gluing together any two shortest paths along a common terminal edge may not necessarily result in a shortest path but yields a ``near-shortest'' path with defect at most $i$. It is known that $α_0$-metric graphs are exactly ptolemaic graphs, and that chordal graphs and distance-hereditary graphs are $α_i$-metric for $i=1$ and $i=2$, respectively. We show that an additive $O(i)$-approximation of the radius, of the diameter, and in fact of all vertex eccentricities of an $α_i$-metric graph can be computed in total linear time. Our strongest results are obtained for $α_1$-metric graphs, for which we prove that a central vertex can be computed in subquadratic time, and even better in linear time for so-called $(α_1,Δ)$-metric graphs (a superclass of chordal graphs and of plane triangulations with inner vertices of degree at least $7$). The latter answers a question raised in (Dragan, IPL, 2020). Our algorithms follow from new results on centers and metric intervals of $α_i$-metric graphs. In particular, we prove that the diameter of the center is at most $3i+2$ (at most $3$, if $i=1$). The latter partly answers a question raised in (Yushmanov & Chepoi, Mathematical Problems in Cybernetics, 1991).

cs.DS↗

arXiv2023

Obstructions to faster diameter computation: Asteroidal sets

An extremity is a vertex such that the removal of its closed neighbourhood does not increase the number of connected components. Let $Ext_α$ be the class of all connected graphs whose quotient graph obtained from modular decomposition contains no more than $α$ pairwise nonadjacent extremities. Our main contributions are as follows. First, we prove that the diameter of every $m$-edge graph in $Ext_α$ can be computed in deterministic ${\cal O}(α^3 m^{3/2})$ time. We then improve the runtime to linear for all graphs with bounded clique-number. Furthermore, we can compute an additive $+1$-approximation of all vertex eccentricities in deterministic ${\cal O}(α^2 m)$ time. This is in sharp contrast with general $m$-edge graphs for which, under the Strong Exponential Time Hypothesis (SETH), one cannot compute the diameter in ${\cal O}(m^{2-ε})$ time for any $ε> 0$. As important special cases of our main result, we derive an ${\cal O}(m^{3/2})$-time algorithm for exact diameter computation within dominating pair graphs of diameter at least six, and an ${\cal O}(k^3m^{3/2})$-time algorithm for this problem on graphs of asteroidal number at most $k$. We end up presenting an improved algorithm for chordal graphs of bounded asteroidal number, and a partial extension of our results to the larger class of all graphs with a dominating target of bounded cardinality. Our time upper bounds in the paper are shown to be essentially optimal under plausible complexity assumptions.

cs.DS↗

arXiv2023

Pattern detection in ordered graphs

A popular way to define or characterize graph classes is via forbidden subgraphs or forbidden minors. These characterizations play a key role in graph theory, but they rarely lead to efficient algorithms to recognize these classes. In contrast, many essential graph classes can be recognized efficiently thanks to characterizations of the following form: there must exist an ordering of the vertices such that some ordered pattern does not appear, where a pattern is basically an ordered subgraph. These pattern characterizations have been studied for decades, but there have been recent efforts to better understand them systematically. In this paper, we focus on a simple problem at the core of this topic: given an ordered graph of size $n$, how fast can we detect whether a fixed pattern of size $k$ is present? Following the literature on graph classes recognition, we first look for patterns that can be detected in linear time. We prove, among other results, that almost all patterns on three vertices (which capture many interesting classes, such as interval, chordal, split, bipartite, and comparability graphs) fall in this category. Then, in a finer-grained complexity perspective, we prove conditional lower bounds for this problem. In particular we show that for a large family of patterns on four vertices it is unlikely that subquadratic algorithm exist. Finally, we define a parameter for patterns, the merge-width, and prove that for patterns of merge-width $t$, one can solve the problem in $O(n^{ct})$ for some constant~$c$. As a corollary, we get that detecting outerplanar patterns and other classes of patterns can be done in time independent of the size of the pattern.

cs.DS↗

arXiv2023

Subquadratic-time algorithm for the diameter and all eccentricities on median graphs

On sparse graphs, Roditty and Williams [2013] proved that no $O(n^{2-\varepsilon})$-time algorithm achieves an approximation factor smaller than $\frac{3}{2}$ for the diameter problem unless SETH fails. In this article, we solve an open question formulated in the literature: can we use the structural properties of median graphs to break this global quadratic barrier? We propose the first combinatiorial algorithm computing exactly all eccentricities of a median graph in truly subquadratic time. Median graphs constitute the family of graphs which is the most studied in metric graph theory because their structure represents many other discrete and geometric concepts, such as CAT(0) cube complexes. Our result generalizes a recent one, stating that there is a linear-time algorithm for all eccentricities in median graphs with bounded dimension $d$, i.e. the dimension of the largest induced hypercube. This prerequisite on $d$ is not necessarily anymore to determine all eccentricities in subquadratic time. The execution time of our algorithm is $O(n^{1.6408}\log^{O(1)} n)$. We provide also some satellite outcomes related to this general result. In particular, restricted to simplex graphs, this algorithm enumerates all eccentricities with a quasilinear running time. Moreover, an algorithm is proposed to compute exactly all reach centralities in time $O(2^{3d}n\log^{O(1)}n)$.

cs.DS↗

arXiv2022

Balancing graph Voronoi diagrams with one more vertex

Let $G=(V,E)$ be a graph with unit-length edges and nonnegative costs assigned to its vertices. Being given a list of pairwise different vertices $S=(s_1,s_2,\ldots,s_p)$, the {\em prioritized Voronoi diagram} of $G$ with respect to $S$ is the partition of $G$ in $p$ subsets $V_1,V_2,\ldots,V_p$ so that, for every $i$ with $1 \leq i \leq p$, a vertex $v$ is in $V_i$ if and only if $s_i$ is a closest vertex to $v$ in $S$ and there is no closest vertex to $v$ in $S$ within the subset $\{s_1,s_2,\ldots,s_{i-1}\}$. For every $i$ with $1 \leq i \leq p$, the {\em load} of vertex $s_i$ equals the sum of the costs of all vertices in $V_i$. The load of $S$ equals the maximum load of a vertex in $S$. We study the problem of adding one more vertex $v$ at the end of $S$ in order to minimize the load. This problem occurs in the context of optimally locating a new service facility ({\it e.g.}, a school or a hospital) while taking into account already existing facilities, and with the goal of minimizing the maximum congestion at a site. There is a brute-force algorithm for solving this problem in ${\cal O}(nm)$ time on $n$-vertex $m$-edge graphs. We prove a matching time lower bound for the special case where $m=n^{1+o(1)}$ and $p=1$, assuming the so called Hitting Set Conjecture of Abboud et al. On the positive side, we present simple linear-time algorithms for this problem on cliques, paths and cycles, and almost linear-time algorithms for trees, proper interval graphs and (assuming $p$ to be a constant) bounded-treewidth graphs.

cs.DS↗

arXiv2021

Fast Diameter Computation within Split Graphs

When can we compute the diameter of a graph in quasi linear time? We address this question for the class of {\em split graphs}, that we observe to be the hardest instances for deciding whether the diameter is at most two. We stress that although the diameter of a non-complete split graph can only be either $2$ or $3$, under the Strong Exponential-Time Hypothesis (SETH) we cannot compute the diameter of an $n$-vertex $m$-edge split graph in less than quadratic time -- in the size $n+m$ of the input. Therefore it is worth to study the complexity of diameter computation on {\em subclasses} of split graphs, in order to better understand the complexity border. Specifically, we consider the split graphs with bounded {\em clique-interval number} and their complements, with the former being a natural variation of the concept of interval number for split graphs that we introduce in this paper. We first discuss the relations between the clique-interval number and other graph invariants such as the classic interval number of graphs, the treewidth, the {\em VC-dimension} and the {\em stabbing number} of a related hypergraph. Then, in part based on these above relations, we almost completely settle the complexity of diameter computation on these subclasses of split graphs: - For the $k$-clique-interval split graphs, we can compute their diameter in truly subquadratic time if $k={\cal O}(1)$, and even in quasi linear time if $k=o(\log{n})$ and in addition a corresponding ordering of the vertices in the clique is given. However, under SETH this cannot be done in truly subquadratic time for any $k = ω(\log{n})$. - For the {\em complements} of $k$-clique-interval split graphs, we can compute their diameter in truly subquadratic time if $k={\cal O}(1)$, and even in time ${\cal O}(km)$ if a corresponding ordering of the vertices in the stable set is given. Again this latter result is optimal under SETH up to polylogarithmic factors. Our findings raise the question whether a $k$-clique interval ordering can always be computed in quasi linear time. We prove that it is the case for $k=1$ and for some subclasses such as bounded-treewidth split graphs, threshold graphs and comparability split graphs. Finally, we prove that some important subclasses of split graphs -- including the ones mentioned above -- have a bounded clique-interval number.

cs.DS↗

arXiv2021

Fast deterministic algorithms for computing all eccentricities in (hyperbolic) Helly graphs

A graph is Helly if every family of pairwise intersecting balls has a nonempty common intersection. The class of Helly graphs is the discrete analogue of the class of hyperconvex metric spaces. It is also known that every graph isometrically embeds into a Helly graph, making the latter an important class of graphs in Metric Graph Theory. We study diameter, radius and all eccentricity computations within the Helly graphs. Under plausible complexity assumptions, neither the diameter nor the radius can be computed in truly subquadratic time on general graphs. In contrast to these negative results, it was recently shown that the radius and the diameter of an $n$-vertex $m$-edge Helly graph $G$ can be computed with high probability in $\tilde{\mathcal O}(m\sqrt{n})$ time (i.e., subquadratic in $n+m$). In this paper, we improve that result by presenting a deterministic ${\mathcal O}(m\sqrt{n})$ time algorithm which computes not only the radius and the diameter but also all vertex eccentricities in a Helly graph. Furthermore, we give a parameterized linear-time algorithm for this problem on Helly graphs, with the parameter being the Gromov hyperbolicity $δ$. More specifically, we show that the radius and a central vertex of an $m$-edge $δ$-hyperbolic Helly graph $G$ can be computed in $\mathcal O(δm)$ time and that all vertex eccentricities in $G$ can be computed in $\mathcal O(δ^2 m)$ time. To show this more general result, we heavily use our new structural properties obtained for Helly graphs.

cs.DS↗

arXiv2021

Beyond Helly graphs: the diameter problem on absolute retracts

Characterizing the graph classes such that, on $n$-vertex $m$-edge graphs in the class, we can compute the diameter faster than in ${\cal O}(nm)$ time is an important research problem both in theory and in practice. We here make a new step in this direction, for some metrically defined graph classes. Specifically, a subgraph $H$ of a graph $G$ is called a retract of $G$ if it is the image of some idempotent endomorphism of $G$. Two necessary conditions for $H$ being a retract of $G$ is to have $H$ is an isometric and isochromatic subgraph of $G$. We say that $H$ is an absolute retract of some graph class ${\cal C}$ if it is a retract of any $G \in {\cal C}$ of which it is an isochromatic and isometric subgraph. In this paper, we study the complexity of computing the diameter within the absolute retracts of various hereditary graph classes. First, we show how to compute the diameter within absolute retracts of bipartite graphs in randomized $\tilde{\cal O}(m\sqrt{n})$ time. For the special case of chordal bipartite graphs, it can be improved to linear time, and the algorithm even computes all the eccentricities. Then, we generalize these results to the absolute retracts of $k$-chromatic graphs, for every fixed $k \geq 3$. Finally, we study the diameter problem within the absolute retracts of planar graphs and split graphs, respectively.

math.CO↗

arXiv2020

Optimal diameter computation within bounded clique-width graphs

Coudert et al. (SODA'18) proved that under the Strong Exponential-Time Hypothesis, for any $ε>0$, there is no ${\cal O}(2^{o(k)}n^{2-ε})$-time algorithm for computing the diameter within the $n$-vertex cubic graphs of clique-width at most $k$. We present an algorithm which given an $n$-vertex $m$-edge graph $G$ and a $k$-expression, computes all the eccentricities in ${\cal O}(2^{{\cal O}(k)}(n+m)^{1+o(1)})$ time, thus matching their conditional lower bound. It can be modified in order to compute the Wiener index and the median set of $G$ within the same amount of time. On our way, we get a distance-labeling scheme for $n$-vertex $m$-edge graphs of clique-width at most $k$, using ${\cal O}(k\log^2{n})$ bits per vertex and constructible in ${\cal O}(k(n+m)\log{n})$ time from a given $k$-expression. Doing so, we match the label size obtained by Courcelle and Vanicat (DAM 2016), while we considerably improve the dependency on $k$ in their scheme. As a corollary, we get an ${\cal O}(kn^2\log{n})$-time algorithm for computing All-Pairs Shortest-Paths on $n$-vertex graphs of clique-width at most $k$. This partially answers an open question of Kratsch and Nelles (STACS'20).

cs.DS↗