arXiv subjects

Guillaume Laibe

Publications and source records attributed to Guillaume Laibe.

69 records · Page 4Linked to original sources

arXiv2014

Diversity in the outcome of dust radial drift in protoplanetary discs

The growth of dust particles into planet embryos needs to circumvent the radial-drift barrier, i.e. the accretion of dust particles onto the central star by radial migration. The outcome of the dust radial migration is governed by simple criteria between the dust-to-gas ratio and the exponents p and q of the surface density and temperature power laws. The transfer of radiation provides an additional constraint between these quantities because the disc thermal structure is fixed by the dust spatial distribution. To assess which discs are primarily affected by the radial-drift barrier, we used the radiative transfer code MCFOST to compute the temperature structure of a wide range of disc models, stressing the particular effects of grain size distributions and vertical settling. We find that the outcome of the dust migration process is very sensitive to the physical conditions within the disc. For high dust-to-gas ratios (> 0.01) or flattened disc structures (H/R < 0.05), growing dust grains can efficiently decouple from the gas, leading to a high concentration of grains at a critical radius of a few AU. Decoupling of grains can occur at a large fraction (> 0.1) of the initial radius, for a dust-to-gas ratio greater than ~ 0.05. The exact value of the required dust-to-gas ratio for dust to stop its migration is strongly dependent on the disc temperature structure. Non growing dust grains are accreted for discs with flat surface density profiles (p<0.7) while they always remain in the disc if the surface density is steep enough (p>1.2). Both the presence of large grains and vertical settling tend to favour the accretion of non growing dust grains onto the central object, but it slows down the migration of growing dust grains. All the disc configurations are found to have favourable temperature profiles over most of the disc to retain their planetesimals.

astro-ph.SR↗

arXiv2014

Dusty gas with one fluid

In this paper, we show how the two-fluid equations describing the evolution of a dust and gas mixture can be reformulated to describe a single fluid moving with the barycentric velocity of the mixture. This leads to evolution equations for the total density, momentum, the differential velocity between the dust and the gas phases and either the dust-to-gas ratio or the dust fraction. The equations are similar to the usual equations of gas dynamics, providing a convenient way to extend existing codes to simulate two-fluid mixtures without modifying the code architecture. Our approach avoids the inherent difficulties related to the standard approach where the two phases are separate and coupled via a drag term. In particular, the requirements of infinite spatial and temporal resolution as the stopping time tends to zero are no longer necessary. This means that both small and large grains can be straightforwardly treated with the same method, with no need for complicated implicit schemes. Since there is only one resolution scale the method also avoids the problem of unphysical trapping of one fluid (e.g. dust) below the resolution of the other. We also derive a simplified set of equations applicable to the case of strong drag/small grains, consisting of the standard fluid equations with a modified sound speed, plus an advection-diffusion equation for the dust-to-gas ratio. This provides a simple and fast way to evolve the mixture when the stopping time is smaller than the Courant timestep. We present a Smoothed Particle Hydrodynamics implementation in a companion paper.

astro-ph.EP↗

arXiv2014

Dusty gas with one fluid in smoothed particle hydrodynamics

In a companion paper we have shown how the equations describing gas and dust as two fluids coupled by a drag term can be reformulated to describe the system as a single fluid mixture. Here we present a numerical implementation of the one-fluid dusty gas algorithm using Smoothed Particle Hydrodynamics (SPH). The algorithm preserves the conservation properties of the SPH formalism. In particular, the total gas and dust mass, momentum, angular momentum and energy are all exactly conserved. Shock viscosity and conductivity terms are generalised to handle the two-phase mixture accordingly. The algorithm is benchmarked against a comprehensive suit of problems: dustybox, dustywave, dustyshock and dustyoscill, each of them addressing different properties of the method. We compare the performance of the one-fluid algorithm to the standard two-fluid approach. The one-fluid algorithm is found to solve both of the fundamental limitations of the two- fluid algorithm: it is no longer possible to concentrate dust below the resolution of the gas (they have the same resolution by definition), and the spatial resolution criterion h < csts, required in two-fluid codes to avoid over-damping of kinetic energy, is unnecessary. Implicit time stepping is straightforward. As a result, the algorithm is up to ten billion times more efficient for 3D simulations of small grains. Additional benefits include the use of half as many particles, a single kernel and fewer SPH interpolations. The only limitation is that it does not capture multi-streaming of dust in the limit of zero coupling, suggesting that in this case a hybrid approach may be required.

astro-ph.EP↗

arXiv2013

Growing dust grains in protoplanetary discs - I. Radial drift with toy growth models

In a series of papers, we present a comprehensive analytic study of the global motion of growing dust grains in protoplanetary discs, addressing both the radial drift and the vertical settling of the particles. Here we study how the radial drift of dust particles is affected by grain growth. In a first step, toy models in which grain growth can either be constant, accelerate or decelerate are introduced. The equations of motion are analytically integrable and therefore the grains dynamics is easy to understand. The radial motion of growing grains is governed by the relative efficiency of the growth and migration processes which is expressed by the dimensionless parameter Lambda, as well as the exponents for the gas surface density and temperature profiles, denoted p and q respectively. When Lambda is of order unity, growth and migration are strongly coupled, providing the most efficient radial drift. For the toy models considered, grains pile up when -p+q+1/2<0. Importantly, we show the existence of a second process which can help discs to retain their solid materials. For accelerating growth, grains end up their migration at a finite radius, thus avoiding being accreted onto the central star.

astro-ph.EP↗

arXiv2013

Growing dust grains in protoplanetary discs - II. The Radial drift barrier problem

We aim to study the migration of growing dust grains in protoplanetary discs, where growth and migration are tightly coupled. This includes the crucial issue of the radial-drift barrier for growing dust grains. We therefore extend the study performed in Paper I, considering models for grain growth and grain dynamics where both the migration and growth rate depend on the grain size and the location in the disc. The parameter space of disc profiles and growth models is exhaustively explored. In doing so, interpretations for the grain motion found in numerical simulations are also provided. We find that a large number of cases is required to characterise entirely the grains radial motion, providing a large number of possible outcomes. Some of them lead dust particles to be accreted onto the central star and some of them don't. We find then that q<1 is required for discs to retain their growing particles, where q is the exponent of the radial temperature profile T(R) proportional to R^-q. Additionally, the initial dust-to gas ratio has to exceed a critical value for grains to pile up efficiently, thus avoiding being accreted onto the central star. Discs are also found to retain efficiently small dust grains regenerated by fragmentation. We show how those results are sensitive to the turbulent model considered. Even though some physical processes have been neglected, this study allows to sketch a scenario in which grains can survive the radial-drift barrier in protoplanetary discs as they grow.

astro-ph.EP↗

arXiv2013

Growing dust grains in protoplanetary discs - III. Vertical settling

We aim to derive a simple analytic model to understand the essential properties of vertically settling growing dust grains in laminar protoplanetary discs. Separating the vertical dynamics from the motion in the disc midplane, we integrate the equations of motion for both a linear and an exponential grain growth rate. Numerical integrations are performed for more complex growth models. We find that the settling efficiency depends on the value of the dimensionless parameter gamma, which characterises the relative efficiency of grain growth with respect to the gas drag. Since gamma is expected to be of order as the initial dust-to-gas ratio in the disc (of order 10^-2), grain growth enhances the energy dissipation of the dust particles and improve the settling efficiency in protoplanetary discs. This behaviour is mostly independent of the growth model considered as well as of the radial drift of the particles.

astro-ph.EP↗

arXiv2012

On the accumulation of planetesimals near disc gaps created by protoplanets

We have performed three-dimensional two-fluid (gas-dust) hydrodynamical models of circumstellar discs with embedded protoplanets (3 - 333 M\oplu) and small solid bodies (radii 10cm to 10m). We find that high mass planets (\gtrsim Saturn mass) open sufficiently deep gaps in the gas disc such that the density maximum at the outer edge of the gap can very efficiently trap metre-sized solid bodies. This allows the accumulation of solids at the outer edge of the gap as solids from large radii spiral inwards to the trapping region. This process of accumulation occurs fastest for those bodies that spiral inwards most rapidly, typically metre-sized boulders, whilst smaller and larger objects will not migrate sufficiently rapidly in the discs lifetime to benefit from the process. Around a Jupiter mass planet we find that bound clumps of solid material, as large as several Earth masses, may form, potentially collapsing under self-gravity to form planets or planetesimals. These results are in agreement with Lyra et al. (2009), supporting their finding that the formation of a second generation of planetesimals or of terrestrial mass planets may be triggered by the presence of a high mass planet.

astro-ph.EP↗

arXiv2011

Revisiting the "radial-drift barrier" of planet formation and its relevance in observed protoplanetary discs

Context. To form metre-sized pre-planetesimals in protoplanetary discs, growing grains have to decouple from the gas before they are accreted onto the central star during their phase of fast radial migration and thus overcome the so-called "radial-drift barrier" (often inaccurately referred to as the "metre-size barrier"). Aims. To predict the outcome of the radial motion of dust grains in protoplanetary discs whose surface density and temperature follow power-law profiles, with exponent p and q respectively. We investigate both the Epstein and the Stokes drag regimes which govern the motion of the dust. Methods. We analytically integrate the equations of motion obtained from perturbation analysis. We compare these results with those from direct numerical integration of the equations of motion. Then, using data from observed discs, we predict the fate of dust grains in real discs. Results. When a dust grain reaches the inner regions of the disc, the acceleration due to the increase of the pressure gradient is counterbalanced by the increase of the gas drag. We find that most grains in the Epstein (resp. the Stokes) regime survive their radial migration if-p+q+1/2 \leq0 (resp. if q\leq 2/3). The majority of observed discs satisfies both-p+q+ 1/2 \leq0 and q\leq 2/3: a large fraction of both their small and large grains remain in the disc, for them the radial drift barrier does not exist.

astro-ph.EP↗

arXiv2011

Dusty gas with SPH - II. Implicit timestepping and astrophysical drag regimes

In a companion paper (Laibe & Price 2011b), we have presented an algorithm for simulating two-fluid gas and dust mixtures in Smoothed Particle Hydrodynamics (SPH). In this paper, we develop an implicit timestepping method that preserves the exact conservation of the both linear and angular momentum in the underlying SPH algorithm, but unlike previous schemes, allows the iterations to converge to arbitrary accuracy and is suited to the treatment of non- linear drag regimes. The algorithm presented in Paper I is also extended to deal with realistic astrophysical drag regimes, including both linear and non-linear Epstein and Stokes drag. The scheme is benchmarked against the test suite presented in Paper I, including i) the analytic solutions of the dustybox problem and ii) solutions of the dustywave, dustyshock, dustysedov and dustydisc obtained with explicit timestepping. We find that the implicit method is 1- 10 times faster than the explicit temporal integration when the ratio r between the the timestep and the drag stopping time is 1 < r < 1000.

astro-ph.IM↗

arXiv2011

Dusty gas with SPH - I. Algorithm and test suite

We present a new algorithm for simulating two-fluid gas and dust mixtures in Smoothed Particle Hydrodynamics (SPH), systematically addressing a number of key issues including the generalised SPH density estimate in multi-fluid systems, the consistent treatment of variable smoothing length terms, finite particle size, time step stability, thermal coupling terms and the choice of kernel and smoothing length used in the drag operator. We find that using double-hump shaped kernels improves the accuracy of the drag interpolation by a factor of several hundred compared to the use of standard SPH bell-shaped kernels, at no additional computational expense. In order to benchmark our algorithm, we have developed a comprehensive suite of standardised, simple test problems for gas and dust mixtures: dustybox, dustywave, dustyshock, dustysedov and dustydisc, the first three of which have known analytic solutions. We present the validation of our algorithm against all of these tests. In doing so, we show that the spatial resolution criterion Δ< cs ts is a necessary condition in all gas+dust codes that becomes critical at high drag (i.e. small stopping time ts) in order to correctly predict the dynamics. Implicit timestepping and the implementation of realistic astrophysical drag regimes are addressed in a companion paper.

astro-ph.IM↗

arXiv2011

DUSTYBOX and DUSTYWAVE: Two test problems for numerical simulations of two fluid astrophysical dust-gas mixtures

In this paper we present the analytic solutions for two test problems involving two-fluid mixtures of dust and gas in an astrophysical context. The solutions provide a means of benchmarking numerical codes designed to simulate the non-linear dynamics of dusty gas. The first problem, dustybox, consists of two interpenetrating homogeneous fluids moving with relative velocity difference. We provide exact solutions to the full non-linear problem for a range of drag formulations appropriate to astrophysical fluids (i.e., various prescriptions for Epstein and Stokes drag in different regimes). The second problem, dustywave consists of the propagation of linear acoustic waves in a two-fluid gas-dust mixture. We provide the analytic solution for the case when the two fluids are interacting via a linear drag term. Both test problems are simple to set up in any numerical code and can be run with periodic boundary conditions. The solutions we derive are completely general with respect to both the dust-to-gas ratio and the amplitude of the drag coefficient. A stability analysis of waves in a gas-dust system is also presented, showing that sound waves in an astrophysical dust-gas mixture are linearly stable.

astro-ph.EP↗

arXiv2008

SPH simulations of grain growth in protoplanetary disks

Aims: In order to understand the first stages of planet formation, when tiny grains aggregate to form planetesimals, one needs to simultaneously model grain growth, vertical settling and radial migration of dust in protoplanetary disks. In this study, we implement an analytical prescription for grain growth into a 3D two-phase hydrodynamics code to understand its effects on the dust distribution in disks. Methods: Following the analytic derivation of Stepinski & Valageas (1997), which assumes that grains stick perfectly upon collision, we implement a convenient and fast method of following grain growth in our 3D, two-phase (gas+dust) SPH code. We then follow the evolution of the size and spatial distribution of a dust population in a classical T Tauri star disk. Results: We find that the grains go through various stages of growth due to the complex interplay between gas drag, dust dynamics, and growth. Grains initially grow rapidly as they settle to the mid-plane, then experience a fast radial migration with little growth through the bulk of the disk, and finally pile-up in the inner disk where they grow more efficiently. This results in a bimodal distribution of grain sizes. Using this simple prescription of grain growth, we find that grains reach decimetric sizes in 10^5 years in the inner disk and survive the fast migration phase.

astro-ph↗

arXiv2008

Dust evolution in protoplanetary disks

We investigate the behaviour of dust in protoplanetary disks under the action of gas drag using our 3D, two-fluid (gas+dust) SPH code. We present the evolution of the dust spatial distribution in global simulations of planetless disks as well as of disks containing an already formed planet. The resulting dust structures vary strongly with particle size and planetary gaps are much sharper than in the gas phase, making them easier to detect with ALMA than anticipated. We also find that there is a range of masses where a planet can open a gap in the dust layer whereas it doesn't in the gas disk. Our dust distributions are fed to the radiative transfer code MCFOST to compute synthetic images, in order to derive constraints on the settling and growth of dust grains in observed disks.

astro-ph↗

arXiv2008

3D SPH simulations of grain growth in protoplanetary disks

We present the first results of the treatment of grain growth in our 3D, two-fluid (gas+dust) SPH code describing protoplanetary disks. We implement a scheme able to reproduce the variation of grain sizes caused by a variety of physical processes and test it with the analytical expression of grain growth given by Stepinski & Valageas (1997) in simulations of a typical T Tauri disk around a one solar mass star. The results are in agreement with a turbulent growing process and validate the method. We are now able to simulate the grain growth process in a protoplanetary disk given by a more realistic physical description, currently under development. We discuss the implications of the combined effect of grain growth and dust vertical settling and radial migration on subsequent planetesimal formation.

astro-ph↗

arXiv2007

3D SPH simulations of grain growth in protoplanetary disks

astro-ph↗