arXiv subjects

Guillermo Arregui

Publications and source records attributed to Guillermo Arregui.

At least 19 recordsLinked to original sources

arXiv2026

Broadband silicon photonic phase shifters driven by gradient optical forces

While initially deployed for optical interconnects, silicon photonics is increasingly being explored as a hardware platform for programmable optical systems, including linear optical processors, neuromorphic photonic networks, quantum photonic circuits and multiplexed sensor arrays. Common to most existing implementations is that light is controlled with electronics, and even basic demonstrations wherein light directly controls light remain limited. Here we demonstrate a broadband all-optical silicon photonic phase shifter based on an optomechanically mediated light-light interaction arising from the gradient optical force. Our device concept relies on slot-mode waveguides suspended by subwavelength gratings, which provide mechanical support while preserving optical confinement. We demonstrate all-optical phase shifting using a guided pump beam co-propagating with the signal beam, with only 60 $\mu$W required to achieve a $\pi$ phase shift in a 178.6 $\mu$m-long device. In addition, we measure the required pump power across a wide parameter space and find quantitative agreement with a lumped force-equilibrium model. Since the actuation relies on an all-optical geometric deformation rather than on material-index tuning, the approach avoids local electrical connections to the active element, carries no Kramers-Kronig absorption penalty, and is naturally compatible with cryogenic quantum photonic platforms.

physics.optics↗

arXiv2026

Coupled Flexural Optomechanical Cavities with Engineered Nanomechanical Interconnects

Integrated nanomechanical circuits require compact and predictable ways to read out, confine, and connect mechanical motion across multiple nanoscale elements. This challenge is particularly acute for megahertz flexural modes, whose large mechanical response and nonlinear dynamics are attractive for optomechanics, sensing, and signal processing, but whose extended nature makes local confinement and coupling difficult within dense devices. Here we demonstrate an optomechanical nanobeam platform in which optical transduction and mechanical connectivity are both engineered lithographically. Transverse geometric asymmetry in the photonic-crystal cavity breaks the cancellation that suppresses dispersive coupling to in-plane flexural motion, making these modes optically bright without ancillary structures. In parallel, serpentine mechanical links engineered through their complex band structure act as compact mirrors and evanescent couplers for MHz flexural waves. In coupled-cavity devices, the normal-mode splitting decays exponentially with the number of serpentine cells, yielding an experimental attenuation constant in quantitative agreement with full-system simulations. Geometry-dependent measurements further show that the coupling can be tuned by the interconnect design and identify regimes where finite-link modes hybridize with the cavity modes, beyond a simple two-resonator picture. These results establish complex-band-engineered mechanical links as calibrated interconnects for scalable optomechanical nanocircuits based on optically addressable MHz flexural resonators.

physics.optics↗

arXiv2025

Noncontact friction in ultracoherent nanomechanical resonators near dielectric materials

Micro- and nanomechanical resonators are emerging as promising platforms for quantum technologies, precision sensors and fundamental science experiments. To utilize these devices for force sensing or quantum optomechanics, they must be brought in close proximity with other systems for functionalization or efficient readout. Improved understanding of the loss mechanisms in nanomechanical resonators, specifically the advent of dissipation dilution, has led to the development of resonators with unprecedented coherence properties. The mechanical quality factors of this new class of ultracoherent micro- and nanomechanical oscillators can now exceed 1 billion at room temperature, setting their force sensitivities below 1 $\mathrm{aN}/\sqrt{\mathrm{Hz}}$, surpassing those of the state-of-the-art atomic force microscopes (AFMs). Given this new regime of sensitivity, an intriguing question is whether the proximity of other materials hinders mechanical coherence. Here we show: it does. We report a novel dissipation mechanism that occurs in ultracoherent nanomechanical oscillators caused by the presence of nearby dielectrics. By studying the parameter scaling of the effect, we show that the mechanism is more severe for low-frequency mechanical modes and that it is due to dielectric loss within the materials caused by the motion of a resonator which carries static charges. Our observations are consistent with the noncontact friction (NCF) observed in AFMs. Our findings provide insights into limitations on the integration of ultracoherent nanomechanical resonators and highlight the adverse effects of charged defects in these systems.

cond-mat.mes-hall↗

arXiv2024

Cascaded injection locking of optomechanical crystal oscillators

Optomechanical oscillators stand out as high-performance and versatile candidates for serving as reference clocks in sequential photonic integrated circuits. Indeed, they have the unique capability of simultaneously generating mechanical tones and optical signal modulations at frequencies determined by their geometrical design. In this context, the concept of synchronization introduces a powerful means to precisely coordinate the dynamics of multiple oscillators in a controlled manner, thus increasing efficiency and preventing errors in signal processing photonic systems or communication interfaces. In this work, we demonstrate the cascaded injection locking of a pair of silicon-based optomechanical crystal cavities to an external reference signal that subtly modulates the laser driving one of the oscillators. Both cavities interact solely through a weak mechanical link, making the extension of this synchronization mechanism to an increased number of optomechanical oscillators within a common chip more feasible than relying solely on optical interactions. Thus, the combination of the obtained results, supported by a numerical model, with remote optical injection locking schemes discussed in the literature, lays the groundwork for the distribution of reference signals within large networks of processing elements in future phonon-photon hybrid circuits.

physics.optics↗

arXiv2024

Waveguide and cavity quantum electrodynamics with topological bowtie modes

We present a theoretical study on photonic topological crystals whose symmetry is governed by quantum valley-Hall topological insulators and whose propagating edge modes are strongly confined due to bowtie geometries. Dielectric bowtie structures exploit the field discontinuities at boundaries between materials with different refractive indices, and here bowties emerge at the topological interface due to the close proximity of two triangular features in the underlying crystal. The topological bowtie mode features a unit-cell mode volume down to $8\times10^{-4}$ cubic wavelengths at the center of the bowtie bridge of width $10~\text{nm}$, and we show that it is possible to use perturbed versions of the unit cells as building blocks for topological heterostructure bowtie cavities with quality factors exceeding $10^7$. Due to the tightly confined bowtie mode, this implies a strongly enhanced light-matter interaction as quantified by a Purcell factor of $3 \times 10^6$.

physics.optics↗

arXiv2023

Multimode optomechanics with a two-dimensional optomechanical crystal

Chip-scale multimode optomechanical systems have unique benefits for sensing, metrology and quantum technologies relative to their single-mode counterparts. Slot-mode optomechanical crystals enable sideband resolution and large optomechanical couplings of a single optical cavity to two microwave-frequency mechanical modes. Still, previous implementations have been limited to nanobeam geometries, whose effective quantum cooperativity at ultralow temperatures is limited by their low thermal conductance. In this work, we design and experimentally demonstrate a two-dimensional mechanical-optical-mechanical (MOM) platform that dispersively couples a slow-light slot-guided photonic-crystal waveguide mode and two slow-sound $\sim 7$ GHz phononic wire modes localized in physically distinct regions. We first demonstrate optomechanical interactions in long waveguide sections, unveiling acoustic group velocities below 800 m/s, and then move on to mode-gap adiabatic heterostructure cavities with a tailored mechanical frequency difference. Through optomechanical spectroscopy, we demonstrate optical quality factors $Q \sim 10^5$, vacuum optomechanical coupling rates, $g_o/2\pi$, of 1.5 MHz and dynamical backaction effects beyond the single-mode picture. At larger power and adequate laser-cavity detuning, we demonstrate regenerative optomechanical oscillations involving a single mechanical mode, extending to both mechanical modes through modulation of the input laser drive at their frequency difference. This work constitutes an important advance towards engineering MOM systems with nearly degenerate mechanical modes as part of hybrid multipartite quantum systems.

physics.optics↗

arXiv2023

Self-assembly of atomic-scale photonic cavities

Despite tremendous progress in the research on self-assembled nanotechnological building blocks such as macromolecules, nanowires, and two-dimensional materials, synthetic self-assembly methods bridging nanoscopic to macroscopic dimensions remain unscalable and inferior to biological self-assembly. In contrast, planar semiconductor technology has had an immense technological impact owing to its inherent scalability, yet it appears unable to reach the atomic dimensions enabled by self-assembly. Here we use surface forces including Casimir-van der Waals interactions to deterministically self-assemble and self-align suspended silicon nanostructures with void features well below the length scales possible with conventional lithography and etching, despite using nothing more than conventional lithography and etching. The method is remarkably robust and the threshold for self-assembly depends monotonically on all governing parameters across thousands of measured devices. We illustrate the potential of these concepts by fabricating nanostructures, which are impossible to make with any other known method: Waveguide-coupled high-Q silicon photonic cavities that confine telecom photons to 2 nm air gaps with an aspect ratio of 100, corresponding to mode volumes more than 100 times below the diffraction limit. Scanning transmission electron microscopy measurements confirm the ability to build devices even with subnanometer dimensions. Our work constitutes the first steps towards a new generation of fabrication technology that combines the atomic dimensions enabled by self-assembly with the scalability of planar semiconductors.

physics.optics↗

arXiv2023

Intermodulation of optical frequency combs in a multimode optomechanical system

Phonons offer the possibility to connect the microwave and optical domains while being efficiently transduced with electronic and optical signals. Here, we present a multimodal optomechanical platform, consisting of a mechanical-optical-mechanical resonator configuration. The mechanical modes, with frequencies at 265 MHz and 6.8 GHz, can be simultaneously excited into a phonon lasing regime as supported by a stability analysis of the system. Both the MHz and the GHz modes enter a self-sustained oscillation regime, leading to the intermodulation of two frequency combs in the optical field. We characterize this platform experimentally, demonstrating previously unexplored dynamical regimes. These results suggest the possibility to control multiple mechanical degrees of freedom via a single optical mode, with implications in GHz phononic devices, signal processing, and optical comb sensing applications.

physics.optics↗

arXiv2022

Observation of strong backscattering in valley-Hall photonic topological interface modes

The unique properties of light underpin the visions of photonic quantum technologies, optical interconnects, and a wide range of novel sensors, but a key limiting factor today is losses due to either absorption or backscattering on defects. Recent developments in topological photonics have fostered the vision of backscattering-protected waveguides made from topological interface modes, but, surprisingly, measurements of their propagation losses were so far missing. Here we report on measurements of losses in the slow-light regime of valley-Hall topological waveguides and find no indications of topological protection against backscattering on ubiquitous structural defects. We image the light scattered out from the topological waveguides and find that the propagation losses are due to Anderson localization. The only photonic topological waveguides proposed for materials without intrinsic absorption in the optical domain are quantum spin-Hall and valley-Hall interface states, but the former exhibits strong out-of-plane losses, and our work therefore raises fundamental questions about the real-world value of topological protection in reciprocal photonics.

physics.optics↗

arXiv2022

Optomechanical generation of coherent GHz vibrations in a phononic waveguide

Nanophononics has the potential for information transfer, in an analogous manner to its photonic and electronic counterparts. The adoption of phononic systems has been limited, due to difficulties associated with the generation, manipulation, and detection of phonons, especially at GHz frequencies. Existing techniques often require piezoelectric materials with an external radiofrequency excitation that are not readily integrated into existing CMOS infrastructures, while non-piezoelectric demonstrations have been inefficient. In this work, we explore the optomechanical generation of coherent phonons in a suspended 2D silicon phononic crystal cavity with a guided mode around 6.8 GHz. By incorporating an air-slot into this cavity, we turn the phononic waveguide into an optomechanical platform that exploits localized photonic modes resulting from inherent fabrication imperfections for the transduction of mechanics. Such a platform exhibits very fine control of phonons using light, and is capable of coherent self-sustained phonon generation via mechanical lasing around 6.8 GHz. The ability to generate high frequency coherent mechanical vibrations within such a simple 2D CMOS-compatible system could be a first step towards the development of sources in phononic circuitry and the coherent manipulation of other solid-state properties.

physics.optics↗

arXiv2022

Cavity optomechanics with Anderson-localized optical modes

Confining photons in cavities enhances the interactions between light and matter. In cavity optomechanics, this enables a wealth of phenomena ranging from optomechanically induced transparency to macroscopic objects cooled to their motional ground state. Previous work in cavity optomechanics employed devices where ubiquitous structural disorder played no role beyond perturbing resonance frequencies and quality factors. More generally, the interplay between disorder, which must be described by statistical physics, and optomechanical effects has thus far been unexplored. Here, we demonstrate how sidewall roughness in air-slot photonic-crystal waveguides can induce sufficiently strong backscattering of slot-guided light to create Anderson-localized modes with quality factors as high as half a million and mode volumes that are below the diffraction limit. We observe how the interaction between these disorder-induced optical modes and in-plane mechanical modes of the slotted membrane is governed by a distribution of coupling rates, which can exceed $g_{\text{o}}/2π\sim 200$ kHz, leading to mechanical amplification up to self sustained oscillations via optomechanical backaction. Our work constitutes the first steps towards understanding optomechanics in the multiple-scattering regime and opens new perspectives for exploring complex systems with multitude mutually-coupled degrees of freedom.

physics.optics↗

arXiv2021

Phonon dynamics and thermal conductivity of PtSe2 thin films: Impact of crystallinity and film thickness on heat dissipation

We present a comparative investigation of the influence of crystallinity and film thickness on the acoustic and thermal properties of 2D layered PtSe2 thin films of varying thickness (0.6-24 nm) by combining a set of experimental techniques, namely, frequency domain thermo-reflectance, low-frequency Raman and pump-probe coherent phonon spectroscopy. We find a 35% reduction in the cross-plane thermal conductivity of polycrystalline films with thickness larger than 12 nm compared to the crystalline films of the same thickness due to phonon grain boundary scattering. Density functional theory calculations are in good agreement with the experiments and further reveal the ballistic nature of cross-plane heat transport in PtSe2 up to a certain thickness (~20 nm). In addition, our experiments revealed strong interlayer interactions in PtSe2, short acoustic phonon lifetimes in the range of picoseconds, out-of-plane elastic constant C33=31.8 GPa and layer-dependent group velocity ranging from 1340 m/s in bilayer PtSe2 to 1873 m/s in 8 layers of PtSe2. The potential of tuning the lattice cross-plane thermal conductivity of layered 2D materials with the level of crystallinity and the real-time observation of coherent phonon dynamics, which have direct implications on the cooling and transport of electrons, open a new playground for research in 2D thermoelectric devices and provide guidelines for thermal management in 2D electronics.

cond-mat.mtrl-sci↗

arXiv2021

Observation of slow light in glide-symmetric photonic-crystal waveguides

We report optical transmission measurements on suspended silicon photonic-crystal waveguides, where one side of the photonic lattice is shifted by half a period along the waveguide axis. The combination of this glide symmetry and slow light leads to a strongly enhanced chiral light-matter interaction but the interplay between slow light and backscattering has not been investigated experimentally in such waveguides. We build photonic-crystal resonators consisting of glide-symmetric waveguides terminated by reflectors and use transmission measurements as well as evanescent coupling to map out the dispersion relation. We find excellent agreement with theory and measure group indices exceeding 90, implying significant potential for applications in slow-light devices and chiral quantum optics. By measuring resonators of different length, we assess the role of backscattering induced by fabrication imperfections and its intimate connection to the group index.

physics.optics↗

arXiv2021

Thermal properties of nanocrystalline silicon nanobeams

Controlling thermal energy transfer at the nanoscale has become critically important in many applications and thermal properties since it often limits device performance. In this work, we study the effects on thermal conductivity arising from the nanoscale structure of free-standing nanocrystalline silicon films and the increasing surface-to-volume ratio when fabricated into suspended optomechanical nanobeams. We characterize thermal transport in structures with different grain sizes and elucidate the relative impact of grain size and geometrical dimensions on thermal conductivity. We use a micro-time-domain thermoreflectance method to study the impact of the grain size distribution, from 10 to 400 nm, on the thermal conductivity in free-standing nanocrystalline silicon films considering surface phonon and grain boundary scattering. We find a drastic reduction in the thermal conductivity, down to values of 10 W.m^{-1}.K^{-1} and below, which is just a fraction of the conductivity of single crystalline silicon. Decreasing the grain size further decreases the thermal conductivity. We also observe that this effect is smaller in OM nanostructures than in membranes due to the competition of surface scattering in decreasing thermal conductivity. Finally, we introduce a novel versatile contactless characterization technique that can be adapted to any structure supporting a thermally shifted optical resonance and use it to evaluate the thermal conductivity. This method can be used with optical resonances exhibiting different mode profiles and the data is shown to agrees quantitatively with the thermoreflectance measurements. This work opens the way to a more generalized thermal characterization of optomechanical cavities and to create hot-spots with engineered shapes at desired position in the structures as a means to study thermal transport in coupled photon-phonon structures.

physics.app-ph↗

arXiv2020

Injection locking in an optomechanical coherent phonon source

Spontaneous locking of the phase of a coherent phonon source to an external reference is demonstrated in an optomechanical oscillator based on a self-triggered free-carrier/temperature limit cycle. Synchronization is observed when the pump laser driving the mechanical oscillator to a self-sustained state is modulated by a radiofrequency tone. We employ a pump-probe phonon detection scheme based on an independent optical cavity to observe only the mechanical oscillator dynamics. The lock range of the oscillation frequency, i.e., the Arnold tongue, is experimentally determined over a range of external reference strengths, evidencing the possibility to tune the oscillator frequency for a range up to 350 kHz. The stability of the coherent phonon source is evaluated via its phase noise, with a maximum achieved suppression of 44 dBc/Hz at 1kHz offset for a 100 MHz mechanical resonator. Introducing a weak modulation in the excitation laser reveals as a further knob to trigger, control and stabilise the dynamical solutions of self-pulsing based optomechanical oscillators, thus enhancing their potential as acoustic wave sources in a single layer silicon platform.

physics.optics↗

arXiv2020

Properties of Nanocrystalline Silicon Probed by Optomechanics

Nanocrystalline materials exhibit properties that can differ substantially from those of their single crystal counterparts. As such, they provide ways to enhance and optimise their functionality for devices and applications. Here we report on the optical, mechanical and thermal properties of nanocrystalline silicon probed by means of optomechanical nanobeams to extract information of the dynamics of optical absorption, mechanical losses, heat generation and dissipation. The optomechanical nanobeams are fabricated using nanocrystalline films prepared by annealing amorphous silicon layers at different temperatures. The resulting crystallite sizes and the stress in the films can be controlled by the annealing temperature and time and, consequently, the properties of the films can be tuned relatively freely, as demonstrated here by means of electron microscopy and Raman scattering. We show that the nanocrystallite size and the volume fraction of the grain boundaries play a key role in the dissipation rates through non-linear optical and thermal processes. Promising optical (13000) and mechanical (1700) quality factors were found in the optomechanical cavity realised in the nanocrystalline Si resulting from annealing at 950 C. The enhanced absorption and recombination rates via the intra-gap states and the reduced thermal conductivity boost the potential to exploit these non-linear effects in applications, including NEMS, phonon lasing and chaos-based devices.

physics.app-ph↗

arXiv2020

Quantifying the robustness of topological slow light

Low-dimensional nanostructured materials can guide light propagating with very low group velocity vg. However, this slow light is significantly sensitive to unwanted imperfections in the critical dimensions of the nanostructure. The backscattering mean free path, xi, the average ballistic propagation length along the waveguide, quantifies the robustness of slow light against this type of structural disorder. This figure of merit determines the crossover between acceptable slow-light transmission affected by minimal scattering losses and a strong backscattering-induced destructive interference when xi exceeds the waveguide length L. Here, we calculate the backscattering mean free path for a topological photonic waveguide for a specific and determined amount of disorder and, equally relevant, for a fixed value of the group index ng which is the slowdown factor of the group velocity with respect to the speed of light in vacuum. These two figures of merit, xi and ng, should be taken into account when quantifying the robustness of topological and conventional (non-topological) slow-light transport at the nanoscale. Otherwise, any claim on a better performance of topological guided light over conventional one is not justified.

physics.optics↗

arXiv2018

All-optical radiofrequency modulation of Anderson-localized modes

All-optical modulation of light relies on exploiting intrinsic material nonlinearities. However, this optical control is rather challenging due to the weak dependence of the refractive index and absorption coefficients on the concentration of free carriers in standard semiconductors. To overcome this limitation, resonant structures with high spatial and spectral confinement are carefully designed to enhance the stored electromagnetic energy, thereby requiring lower excitation power to achieve significant nonlinear effects. Small mode-volume and high quality (Q)-factor cavities also offer an efficient coherent control of the light field and the targeted optical properties. Here, we report on optical resonances reaching Q - 10^5 induced by disorder on novel photonic/phononic crystal waveguides. At relatively low excitation powers (below 1 mW), these cavities exhibit nonlinear effects leading to periodic (up to - 35 MHz) oscillations of their resonant wavelength. Our system represents a test-bed to study the interplay between structural complexity and material nonlinearities and their impact on localization phenomena and introduces a novel functionality to the toolset of disordered photonics.

physics.optics↗