arXiv subjects

Guillermo Tejeda Muñoz

Publications and source records attributed to Guillermo Tejeda Muñoz.

7 recordsLinked to original sources

arXiv2026

Design and performance of a large-area scintillator-based chamber for the MID subsystem of ALICE 3

This paper reports on the design and construction of a chamber for the muon identifier detector (MID) of the ALICE 3 upgrade project. The chamber consists of two sensitive layers separated by a 1 cm air gap. Each layer holds 24 scintillator bars ($1\times4\times100$ cm$^3$) manufactured by FNAL-NICADD. The bars are equipped with Kuraray wavelength shifting fibers and the readout is provided by a silicon photomultiplier from Hamamatsu. The bars in the second layer are orthogonal to the bars in the first layer, thus providing an overlapping cell size of 4$\times$4 cm$^{2}$. The bar assembly as well as the design of the mechanical structure is described. The design of the chamber is close to that considered in the ALICE 3 letter of intent. The chamber was tested at the CERN T10 beamline using 3 GeV/$c$ pion-enriched and muon beams. The chamber was placed behind an iron absorber, with different absorber lengths considered in the test. The muon identification is performed using a Machine Learning algorithm, which was trained and tested using muon (signal) and pion (background) data (50% of the available statistics). The trained ML algorithm was applied to muon data, yielding a muon efficiency above 99% for the OR condition (detection in either layer 1 or 2). The implementation in the pion-beam data gives the fake-muon efficiency as a function of the absorber length that is well described by an exponential function with a slope parameter of 18.79 cm. The next steps towards finalizing the optimization are outlined.

physics.ins-det↗

arXiv2025

ML-based muon identification using a FNAL-NICADD scintillator chamber for the MID subsystem of ALICE 3

The ALICE Collaboration is planning to construct a new detector (ALICE 3) aiming at exploiting the potential of the high-luminosity Large Hadron Collider (LHC). The new detector will allow ALICE to participate in LHC Run 5 scheduled from 2036 to 2041. The muon-identifier subsystem (MID) is part of the ALICE 3 reference detector layout. The MID will consist of a standard magnetic iron absorber ($\approx4$ nuclear interaction lengths) followed by muon chambers. The baseline option for the MID chambers considers plastic scintillation bars equipped with wave-length shifting fibers and readout with silicon photomultipliers. This paper reports on the performance of a MID chamber prototype using 3 GeV/$c$ pion- and muon-enriched beams delivered by the CERN Proton Synchrotron (PS). The prototype was built using extruded plastic scintillator produced by FNAL-NICADD (Fermi National Accelerator Laboratory - Northern Illinois Center for Accelerator and Detector Development). The prototype was experimentally evaluated using varying absorber thicknesses (60, 70, 80, 90, and 100 cm) to assess its performance. The analysis was performed using Machine Learning techniques and the performance was validated with GEANT 4 simulations. Potential improvements in both hardware and data analysis are discussed.

physics.ins-det↗

arXiv2024

Cosmic Piano: analysing the sound of the Universe

We present the Cosmic Piano, an innovative outreach tool designed to detect muons from air showers produced by cosmic rays colliding with the atmosphere. The Cosmic Piano consists of scintillator-based modules with avalanche photodiodes (APD) readout, which produce a musical note and a flash of light whenever a muon passes through one of them and triggers its electronics. The Cosmic Piano has been showcased at various high-profile events, including the Montreux Jazz Festival and the EuroScience Open Forum, seamlessly fusing scientific phenomena with live music. Building on its success, we have developed a new, comprehensive Masterclass session aimed at engaging high school and university students. This session includes analysing both simulated cosmic ray events and real data from the Cosmic Piano. The Masterclass provides participants with a hands-on experience that mirrors the experimental procedures used in major physics experiments, such as those conducted at CERN with the Large Hadron Collider (LHC) collision data. This initiative offers a unique opportunity for students to engage with an active experiment, bridging the gap between outreach and serious scientific research.

physics.ed-ph↗

arXiv2024

Characterisation of plastic scintillator paddles and lightweight MWPCs for the MID subsystem of ALICE 3

The ALICE collaboration is proposing a completely new detector, ALICE 3, for operation during the LHC Runs 5 and 6. One of the ALICE~3 subsystems is the Muon IDentifier detector (MID), which has to be optimised to be efficient for the reconstruction of $J/ψ$ at rest (muons down to $p_{\rm T}\approx1.5$ GeV/$c$) for $|η|<1.3$. Given the modest particle flux expected in the MID of a few Hz/cm$^2$, technologies like plastic scintillator bars ($\approx1$ m length) equipped with wavelength-shifting fibers and silicon photomultiplier readout, and lightweight Multi-Wire Proportional Chambers (MWPCs) are under investigation. To this end, different plastic scintillator paddles and MWPCs were studied at the CERN T10 test beam facility. This paper reports on the performance of the scintillator prototypes tested at different beam momenta (from 0.5 GeV/$c$ up to 6 GeV/$c$) and positions (horizontal, vertical, and angular scans). The MWPCs were tested at different momenta (from 0.5 GeV/$c$ to 10 GeV/$c$) and beam intensities, their efficiency and position resolutions were verified beyond the particle rates expected with the MID in ALICE 3.

physics.ins-det↗

arXiv2023

Recent Progress and Next Steps for the MATHUSLA LLP Detector

We report on recent progress and next steps in the design of the proposed MATHUSLA Long Lived Particle (LLP) detector for the HL-LHC as part of the Snowmass 2021 process. Our understanding of backgrounds has greatly improved, aided by detailed simulation studies, and significant R&D has been performed on designing the scintillator detectors and understanding their performance. The collaboration is on track to complete a Technical Design Report, and there are many opportunities for interested new members to contribute towards the goal of designing and constructing MATHUSLA in time for HL-LHC collisions, which would increase the sensitivity to a large variety of highly motivated LLP signals by orders of magnitude.

hep-ex↗

arXiv2020

An Update to the Letter of Intent for MATHUSLA: Search for Long-Lived Particles at the HL-LHC

We report on recent progress in the design of the proposed MATHUSLA Long Lived Particle (LLP) detector for the HL-LHC, updating the information in the original Letter of Intent (LoI), see CDS:LHCC-I-031, arXiv:1811.00927. A suitable site has been identified at LHC Point 5 that is closer to the CMS Interaction Point (IP) than assumed in the LoI. The decay volume has been increased from 20 m to 25 m in height. Engineering studies have been made in order to locate much of the decay volume below ground, bringing the detector even closer to the IP. With these changes, a 100 m x 100 m detector has the same physics reach for large c$τ$ as the 200 m x 200 m detector described in the LoI and other studies. The performance for small c$τ$ is improved because of the proximity to the IP. Detector technology has also evolved while retaining the strip-like sensor geometry in Resistive Plate Chambers (RPC) described in the LoI. The present design uses extruded scintillator bars read out using wavelength shifting fibers and silicon photomultipliers (SiPM). Operations will be simpler and more robust with much lower operating voltages and without the use of greenhouse gases. Manufacturing is straightforward and should result in cost savings. Understanding of backgrounds has also significantly advanced, thanks to new simulation studies and measurements taken at the MATHUSLA test stand operating above ATLAS in 2018. We discuss next steps for the MATHUSLA collaboration, and identify areas where new members can make particularly important contributions.

physics.ins-det↗

arXiv2019

MATHUSLA: A Detector Proposal to Explore the Lifetime Frontier at the HL-LHC

The observation of long-lived particles at the LHC would reveal physics beyond the Standard Model, could account for the many open issues in our understanding of our universe, and conceivably point to a more complete theory of the fundamental interactions. Such long-lived particle signatures are fundamentally motivated and can appear in virtually every theoretical construct that address the Hierarchy Problem, Dark Matter, Neutrino Masses and the Baryon Asymmetry of the Universe. We describe in this document a large detector, MATHUSLA, located on the surface above an HL-LHC $pp$ interaction point, that could observe long-lived particles with lifetimes up to the Big Bang Nucleosynthesis limit of 0.1 s. We also note that its large detector area allows MATHUSLA to make important contributions to cosmic ray physics. Because of the potential for making a major breakthrough in our conceptual understanding of the universe, long-lived particle searches should have the highest level of priority.

hep-ex↗