Kirigami Film Reflector for Deployable Space Antennas
We propose a low-pretension reflective kirigami film as a material for the reflective surfaces of large deployable space reflector antennas with an operating frequency around 10 GHz. The kirigami cut pattern is based on the well-known rotating squares pattern but is augmented with diagonal cuts to enhance stretchability and allow control over the effective Poisson's ratio. Using finite element simulations, we analyzed how the geometric parameters of this pattern affected the reflectance of the film and the pretension required to resist thermal deformations. Tensile testing of selected designs, which are approximately half the weight of traditional metallic meshes, demonstrated a substantial reduction in the needed pretension to ~0.5 N/m and as low as ~0.1 N/m. Such low pretension represents an order-of-magnitude improvement over traditional metallic mesh reflectors and could enable the use of lighter antenna trusses. Free-space reflectance measurements also show that these perforated films can maintain power reflectance exceeding 90% at 10 GHz under the strains expected in the deployed configuration.