arXiv subjects

Guo-Yong Xiang

Publications and source records attributed to Guo-Yong Xiang.

At least 55 records · Page 3Linked to original sources

arXiv2020

Ultimate precision of multi-parameter quantum magnetometry under the parallel scheme

The precise measurement of a magnetic field is one of the most fundamental and important tasks in quantum metrology. Although extensive studies on quantum magnetometry have been carried out over past decades, the ultimate precision that can be achieved for the estimation of all three components of a magnetic field with entangled probe states under the parallel scheme remains unknown. Here we present the ultimate lower bound for the sum of arbitrarily weighted variances in the estimation of all three components of a magnetic field under the parallel scheme and show that this lower bound can be achieved for sufficiently large N. The optimal entangled probe state that achieves the ultimate precision is also explicitly constructed. The obtained precision sets the ultimate limit for the multi-parameter quantum magnetometry under the parallel scheme, which is of fundamental interest and importance in quantum metrology. Our approach also provides a way to characterize the tradeoff among the precisions of multiple parameters that arise from the constraints on the probe states.

quant-ph↗

arXiv2020

Direct estimation of quantum coherence by collective measurements

The recently established resource theory of quantum coherence allows for a quantitative understanding of the superposition principle, with applications reaching from quantum computing to quantum biology. While different quantifiers of coherence have been proposed in the literature, their efficient estimation in today's experiments remains a challenge. Here, we introduce a collective measurement scheme for estimating the amount of coherence in quantum states, which requires entangled measurements on two copies of the state. As we show by numerical simulations, our scheme outperforms other estimation methods based on tomography or adaptive measurements, leading to a higher precision in a large parameter range for estimating established coherence quantifiers of qubit and qutrit states. We show that our method is accessible with today's technology by implementing it experimentally with photons, finding a good agreement between experiment and theory.

quant-ph↗

arXiv2019

Strong Majorization Uncertainty Relations: Theory and Experiment

In spite of enormous theoretical and experimental progresses in quantum uncertainty relations, the experimental investigation of most current, and universal formalism of uncertainty relations, namely majorization uncertainty relations (MURs), has not been implemented yet. A significant problem is that previous studies on the classification of MURs only focus on their mathematical expressions, while the physical difference between various forms remains unknown. First, we use a guessing game formalism to study the MURs, which helps us disclosing their physical nature, and distinguishing the essential differences of physical features between diverse forms of MURs. Second, we tighter the bounds of MURs in terms of flatness processes, or equivalently, in terms of majorization lattice. Third, to benchmark our theoretical results, we experimentally verify MURs in the photonic systems.

quant-ph↗

arXiv2019

Experimental realization of self-guided quantum process tomography

Characterization of quantum processes is a preliminary step necessary in the development of quantum technology. The conventional method uses standard quantum process tomography, which requires $d^2$ input states and $d^4$ quantum measurements for a $d$-dimensional Hilbert space. These experimental requirements are compounded by the complexity of processing the collected data, which can take several orders of magnitude longer than the experiment itself. In this paper we propose an alternative self-guided algorithm for quantum process tomography, tuned for the task of finding an unknown unitary process. Our algorithm is a fully automated and adaptive process characterization technique. The advantages of our algorithm are: inherent robustness to both statistical and technical noise; requires less space and time since there is no post-processing of the data; requires only a single input state and measurement; and, provides on-the-fly diagnostic information while the experiment is running. Numerical results show our algorithm achieves the same $1/n$ scaling as standard quantum process tomography when $n$ uses of the unknown process are used. We also present experimental results wherein the algorithm, and its advantages, are realized for the task of finding an element of $SU(2)$.

quant-ph↗

arXiv2019

Detecting Non-Markovianity via Quantified Coherence: Theory and Experiments

The dynamics of open quantum systems and manipulation of quantum resources are both of fundamental interest in quantum physics. Here, we investigate the relation between quantum Markovianity and coherence, providing an effective way for detecting non-Markovianity based on the \textit{quantum-incoherent relative entropy of coherence} ($\mathcal{QI}$ REC). We theoretically show the relation between completely positive (CP) divisibility and the monotonic behavior of the $\mathcal{QI}$ REC. Also we implement an all-optical experiment to demonstrate that the behavior of the $\mathcal{QI}$ REC is coincident with the entanglement shared between the system and the ancilla for both Markovian and non-Markovian evolution; while other coherence-based non-Markovian information carriers violate monotonicity, even in Markovian processes. Moreover, we experimentally observe that non-Markovianity enhances the ability of creating coherence on an ancilla. This is the first experimental study of the relation between dynamical behavior of the $\mathcal{QI}$ REC and the phenomenon of information backflow. Moreover, our method for detecting non-Markovianity is applicable to general quantum evolutions.

quant-ph↗

arXiv2019

Experimentally reducing the quantum measurement back-action in work distributions by a collective measurement

In quantum thermodynamics, the standard approach to estimate work fluctuations in unitary processes is based on two projective measurements, one performed at the beginning of the process and one at the end. The first measurement destroys any initial coherence in the energy basis, thus preventing later interference effects. In order to decrease this back-action, a scheme based on collective measurements has been proposed in~[PRL 118, 070601 (2017)]. Here, we report its experimental implementation in an optical system. The experiment consists of a deterministic collective measurement on identically prepared two qubits, encoded in the polarisation and path degree of a single photon. The standard two projective measurement approach is also experimentally realized for comparison. Our results show the potential of collective schemes to decrease the back-action of projective measurements, and capture subtle effects arising from quantum coherence.

quant-ph↗

arXiv2019

Quantum coherence and state conversion: theory and experiment

The resource theory of coherence studies the operational value of superpositions in quantum technologies. A key question in this theory concerns the efficiency of manipulation and inter-conversion of the resource. Here we solve this question completely for qubit states by determining the optimal probabilities for mixed state conversions via stochastic incoherent operations. Extending the discussion to distributed scenarios, we introduce and address the task of assisted incoherent state conversion where the process is enhanced by making use of correlations with a second party. Building on these results, we demonstrate experimentally that the optimal state conversion probabilities can be achieved in a linear optics set-up. This paves the way towards real world applications of coherence transformations in current quantum technologies.

quant-ph↗

arXiv2019

Control-enhanced sequential scheme for general quantum parameter estimation at the Heisenberg limit

The advantage of quantum metrology has been experimentally demonstrated for phase estimations where the dynamics are commuting. General noncommuting dynamics, however, can have distinct features. For example, the direct sequential scheme, which can achieve the Heisenberg scaling for the phase estimation under commuting dynamics, can have even worse performances than the classical scheme under noncommuting dynamics. Here we realize a scalable optimally controlled sequential scheme, which can achieve the Heisenberg precision under general noncommuting dynamics. We also present an intuitive geometrical framework for the controlled scheme and identify sweet spots in time at which the optimal controls used in the scheme can be pre-fixed without adaptation, which simplifies the experimental protocols significantly. We successfully implement the scheme up to eight controls in an optical platform, demonstrate a precision near the Heisenberg limit. Our work opens the avenue for harvesting the power of quantum control in quantum metrology, and provides a control-enhanced recipe to achieve the Heisenberg precision under general noncommuting dynamics.

quant-ph↗

arXiv2019

Experimental investigation of majorization uncertainty relations in the high-dimensional systems

Uncertainty relation is not only of fundamental importance to quantum mechanics, but also crucial to the quantum information technology. Recently, majorization formulation of uncertainty relations (MURs) have been widely studied, ranging from two measurements to multiple measurements. Here, for the first time, we experimentally investigate MURs for two measurements and multiple measurements in the high-dimensional systems, and study the intrinsic distinction between direct-product MURs and direct-sum MURs. The experimental results reveal that by taking different nonnegative Schur-concave functions as uncertainty measure, the two types of MURs have their own particular advantages, and also verify that there exists certain case where three-measurement majorization uncertainty relation is much stronger than the one obtained by summing pairwise two-measurement uncertainty relations. Our work not only fills the gap of experimental studies of majorization uncertainty relations, but also represents an advance in quantitatively understanding and experimental verification of majorization uncertainty relations which are universal and capture the essence of uncertainty in quantum theory.

quant-ph↗

arXiv2018

Entanglement detection by violations of noisy uncertainty relations: A proof of principle

It is well-known that the violation of a local uncertainty relation can be used as an indicator for the presence of entanglement. Unfortunately, the practical use of these non-linear witnesses has been limited to few special cases in the past. However, new methods for computing uncertainty bounds became available. Here we report on an experimental implementation of uncertainty-based entanglement witnesses, benchmarked in a regime dominated by strong local noise. We combine the new computational method with a local noise tomography in order to design noise-adapted entanglement witnesses. This proof-of-principle experiment shows that quantum noise can be successfully handled by a fully quantum model in order to enhance entanglement detection efficiencies.

quant-ph↗

arXiv2018

Direct Measurement of the Two-dimensional Spatial Quantum Wavefunction via Strong Measurements

Wavefunction is the foundation of quantum theory, which is assumed to give a complete description of a quantum system. For a long time, wavefunction is introduced as an abstract element of the theory and there lacks effective ways to measure it directly. The situation, however, is somewhat changed when Lundeen et al. reported the direct measurement of the quantum wavefunction via weak measurements, which gives the wavefunction a clearly operational definition [Nature 474, 188 (2011)]. The weak measurement method requires sequential measurements of conjugate observables position and momentum with the position measurement is weak enough. Surprisingly, the recent research by Vallone and Dequal shows that performing sequential strong measurements realizes the same target, in which case no approximation has to be made compared to the case of weak measurements[Phys. Rev. Lett. 116, 040502 (2016)]. Here we experimentally report the direct measurement of the two-dimensional transverse wavefunction of photons via strong measurements for the first time, which implies that an accurate and clear operational definition can be given to wavefunction. We have measured the Gaussian and Laguerre-Gaussian of l = 1 spatial wavefunctions of photons with R-square are 0.97 and 0.93 respectively. As a potentially important application, we show that the direct measurement of two-dimensional wavefunction provides an alternative way to realize digital holography of three-dimensional objects. The results presented here will not only deepen our understanding of abstract wavefunction but also have significant applications in quantum information processing and quantum imaging.

quant-ph↗

arXiv2018

Observation of stronger-than-binary correlations with entangled photonic qutrits

We present the first experimental confirmation of the quantum-mechanical prediction of stronger-than-binary correlations. These are correlations that cannot be explained under the assumption that the occurrence of a particular outcome of an $n \ge 3$-outcome measurement is due to a two-step process in which, in the first step, some classical mechanism precludes $n-2$ of the outcomes and, in the second step, a binary measurement generates the outcome. Our experiment uses pairs of photonic qutrits distributed between two laboratories, where randomly chosen three-outcome measurements are performed. We report a violation by {9.3} standard deviations of the optimal inequality for nonsignaling binary correlations.

quant-ph↗

arXiv2018

Deterministic realization of collective measurements via photonic quantum walks

Collective measurements on identically prepared quantum systems can extract more information than local measurements, thereby enhancing information-processing efficiency. Although this nonclassical phenomenon has been known for two decades, it has remained a challenging task to demonstrate the advantage of collective measurements in experiments. Here we introduce a general recipe for performing deterministic collective measurements on two identically prepared qubits based on quantum walks. Using photonic quantum walks, we realize experimentally an optimized collective measurement with fidelity 0.9946 without post selection. As an application, we achieve the highest tomographic efficiency in qubit state tomography to date. Our work offers an effective recipe for beating the precision limit of local measurements in quantum state tomography and metrology. In addition, our study opens an avenue for harvesting the power of collective measurements in quantum information processing and for exploring the intriguing physics behind this power.

quant-ph↗

arXiv2018

Experimental demonstration of wave-particle duality relation based on coherence measure

Wave-particle duality is a typical example of Bohr's complementarity principle that plays a significant role in quantum mechanics. Previous studies used the visibility of an interference pattern to quantify the wave property and used path information to quantify the particle property. However, coherence is the core and basis of the interference phenomenon. If we could use coherence to characterize the wave property, the understanding of wave-particle duality would be strengthened. A recent theoretical work [Phys. Rev. Lett. 116, 160406 (2016)] found two relations between quantum coherence and path information. Here, we demonstrate the new measure of wave-particle duality based on two kinds of coherence measures quantitatively for the first time. The wave property, quantified by the coherence in the l1-norm measure and the relative entropy measure, can be obtained via tomography of the target state, which is encoded in the path degree of freedom of the photons. The particle property, quantified by the path information, can be obtained via the discrimination of detector states, which is encoded in the polarization degree of freedom of the photons. Our work may deepen people's understanding of coherence and provide a new perspective regarding wave-particle duality.

quant-ph↗

arXiv2018

Experimentally detecting a quantum change point via Bayesian inference

Detecting a change point is a crucial task in statistics that has been recently extended to the quantum realm. A source state generator that emits a series of single photons in a default state suffers an alteration at some point and starts to emit photons in a mutated state. The problem consists in identifying the point where the change took place. In this work, we consider a learning agent that applies Bayesian inference on experimental data to solve this problem. This learning machine adjusts the measurement over each photon according to the past experimental results finds the change position in an online fashion. Our results show that the local-detection success probability can be largely improved by using such a machine learning technique. This protocol provides a tool for improvement in many applications where a sequence of identical quantum states is required.

quant-ph↗

arXiv2017

Experimental cyclic inter-conversion between Coherence and Quantum Correlations

Quantum resource theories seek to quantify sources of non-classicality that bestow quantum technologies their operational advantage. Chief among these are studies of quantum correlations and quantum coherence. The former to isolate non-classicality in the correlations between systems, the latter to capture non-classicality of quantum superpositions within a single physical system. Here we present a scheme that cyclically inter-converts between these resources without loss. The first stage converts coherence present in an input system into correlations with an ancilla. The second stage harnesses these correlations to restore coherence on the input system by measurement of the ancilla. We experimentally demonstrate this inter-conversion process using linear optics. Our experiment highlights the connection between non-classicality of correlations and non-classicality within local quantum systems, and provides potential flexibilities in exploiting one resource to perform tasks normally associated with the other.

quant-ph↗

arXiv2017

Quantum gate identification: error analysis, numerical results and optical experiment

The identification of an unknown quantum gate is a significant issue in quantum technology. In this paper, we propose a quantum gate identification method within the framework of quantum process tomography. In this method, a series of pure states are inputted to the gate and then a fast state tomography on the output states is performed and the data are used to reconstruct the quantum gate. Our algorithm has computational complexity $O(d^3)$ with the system dimension $d$. The algorithm is compared with maximum likelihood estimation method for the running time, which shows the efficiency advantage of our method. An error upper bound is established for the identification algorithm and the robustness of the algorithm against the purity of input states is also tested. We perform quantum optical experiment on single-qubit Hadamard gate to verify the effectiveness of the identification algorithm.

quant-ph↗

arXiv2017

Taking tomographic measurements for photonic qubits 88 ns before they are created

We experimentally demonstrate that tomographic measurements can be performed for states of qubits before they are prepared. A variant of the quantum teleportation protocol is used as a channel between two instants in time, allowing measurements for polarisation states of photons to be implemented 88 ns before they are created. Measurement data taken at the early time and later unscrambled according to the results of the protocol's Bell measurements, produces density matrices with an average fidelity of $0.90 \pm 0.01$ against the ideal states of photons created at the later time. Process tomography of the time-reverse quantum channel finds an average process fidelity of $0.84 \pm 0.02$. While our proof-of-principle implementation necessitates some post-selection, the general protocol is deterministic and requires no post-selection to sift desired states and reject a larger ensemble.

quant-ph↗