arXiv subjects

Guodong Liu

Publications and source records attributed to Guodong Liu.

At least 109 records · Page 6Linked to original sources

arXiv2020

Topological Nodal Line Electrides: Realization of Ideal Nodal Line State Nearly Immune from Spin-Orbit Coupling

Nodal line semimetals (NLSs) have attracted broad interest in current research. In most of existing NLSs, the intrinsic properties of nodal lines are greatly destroyed because nodal lines usually suffer sizable gaps induced by non-negligible spin-orbit coupling (SOC). In this work,we propose the topological nodal line electrides (TNLEs), which achieve electronic structures of nodal lines and electrides simultaneously, provide new insight on designing excellent NLSs nearly immune from SOC. Since the states near the Fermi level are most contributed by nonnucleus-bounded interstitial electrons, nodal lines in TNLEs manifest extremely small SOCinduced gap even possessing heavy elements. Especially, we propose the family of A2B (A = Ca, Sr, Ba; B= As, Sb, Bi) materials are realistic TNLEs with negligible SOC-induced gaps, which can play as excellent platforms to study the intrinsic properties of TNLEs

cond-mat.mtrl-sci↗

arXiv2020

Two-dimensional Weyl nodal line semimetal in high Curie temperature d0 ferromagnet K2N monolayer

Nodal line semimetals in two-dimensional (2-D) materials have attracted intense attention currently. From fundamental physics and spintronic applications points of view, high Curie temperature ferromagnetic (FM) ones with nodal lines robust against spin-orbit coupling (SOC) are significantly in desirable. Here, we propose that FM K2N monolayer is such Weyl nodal line semimetal. We show that K2N monolayer is dynamically stable, and has a FM ground magnetic state with the out-of-plane [001] magnetization. It shows two nodal lines in the low-energy band structures. Both nodal lines are robust against SOC, under the protection of mirror symmetry. We construct an effective Hamiltonian, which can well characterize the nodal lines in the system. Remarkably, the nodal line semimetal proposed here is distinct from the previously studied ones in that K2N monolayer is 2-D d0-type ferromagnet with the magnetism arising from the partially filled N-p orbitals, which can bring special advantages in spintronic applications. Besides, the Curie temperature in K2N monolayer is estimated to be 942K, being significantly higher than previous FM nodal lines materials. We also find that, specific tensile strains can transform the nodal line from type-I to a type-II one, making its nodal line characteristics even more interesting.

cond-mat.mtrl-sci↗

arXiv2020

Simultaneous Generation of Direct- and Indirect-Gap Photoluminescence in Multilayer MoS2 Bubbles

Transition metal dichalcogenide (TMD) materials have received enormous attention due to their extraodinary optical and electrical properties, among which MoS2 is the most typical one. As thickness increases from monolayer to multilayer, the photoluminescence (PL) of MoS2 is gradually quenched due to the direct-to-indirect band gap transition. How to enhance PL response and decrease the layer dependence in multilayer MoS2 is still a challenging task. In this work, we report, for the first time, simultaneous generation of three PL peaks at around 1.3, 1.4 and 1.8 eV on multilayer MoS2 bubbles. The temperature dependent PL measurements indicate that the two peaks at 1.3 and 1.4 eV are phonon-assisted indirect-gap transitions while the peak at 1.8 eV is the direct-gap transition. Using first-principles calculations, the band structure evolution of multilayer MoS2 under strain is studied, from which the origin of the three PL peaks of MoS2 bubbles is further confirmed. Moreover, PL standing waves are observed in MoS2 bubbles that creates Newton-Ring-like patterns. This work demonstrates that the bubble structure may provide new opportunities for engineering the electronic structure and optical properties of layered materials.

cond-mat.mtrl-sci↗

arXiv2020

Direct Measurement of the Electronic Structure and band gap nature of atomic-layer-thick 2H-MoTe2

The millimeter sized monolayer and bilayer 2H-MoTe2 single crystal samples are prepared by a new mechanical exfoliation method. Based on such high-quality samples, we report the first direct electronic structure study on them, using standard high resolution angle-resolved photoemission spectroscopy (ARPES). A direct band gap of 0.924eV is found at K in the rubidium-doped monolayer MoTe2. Similar valence band alignment is also observed in bilayer MoTe2,supporting an assumption of a analogous direct gap semiconductor on it. Our measurements indicate a rather large band splitting of 212meV at the valence band maximum (VBM) in monolayer MoTe2, and the splitting is systematically enlarged with layer stacking, from monolayer to bilayer and to bulk. Meanwhile, our PBE band calculation on these materials show excellent agreement with ARPES results. Some fundamental electronic parameters are derived from the experimental and calculated electronic structures. Our findings lay a foundation for further application-related study on monolayer and bilayer MoTe2.

cond-mat.mtrl-sci↗

arXiv2020

Spectroscopic Evidence of Bilayer Splitting and Interlayer Pairing in an Iron Based Superconductor

In high temperature cuprate superconductors, the interlayer coupling between the CuO$_2$ planes plays an important role in dictating superconductivity, as indicated by the sensitive dependence of the critical temperature (T$_C$) on the number of CuO$_2$ planes in one structural unit. In Bi$_2$Sr$_2$CaCu$_2$O$_{8+δ}$ superconductor with two CuO$_2$ planes in one structural unit, the interaction between the two CuO$_2$ planes gives rise to band splitting into two Fermi surface sheets (bilayer splitting) that have distinct superconducting gap. The iron based superconductors are composed of stacking of the FeAs/FeSe layers; whether the interlayer coupling can cause similar band splitting and its effect on superconductivity remain unclear. Here we report high resolution laser-based angle-resolved photoemission spectroscopy (ARPES) measurements on a newly discovered iron based superconductor, KCa$_2$Fe$_4$As$_4$F$_2$ (T$_C$=33.5\,K) which consists of stacking FeAs blocks with two FeAs layers separated by insulating Ca$_2$F$_2$ blocks. Bilayer splitting effect is observed for the first time that gives rise to totally five hole-like Fermi surface sheets around the Brilliouin zone center. Band structure calculations reproduce the observed bilayer splitting by identifying interlayer interorbital interaction between the two FeAs layers within one FeAs block. All the hole-like pockets around the zone center exhibit Fermi surface-dependent and nodeless superconducting gap. The gap functions with short-range antiferromagetic fluctuations are proposed and the gap symmetry can be well understood when the interlayer pairing is considered. The particularly strong interlayer pairing is observed for one of the bands. Our observations provide key information on the interlayer coupling and interlayer pairing in understanding superconductivity in iron based superconductors.

cond-mat.supr-con↗

arXiv2019

Electronic Structure of Exfoliated Millimeter-Sized Monolayer WSe2 on Silicon Wafer

The monolayer WSe2 is interesting and important for future application in nanoelectronics, spintronics and valleytronics devices, because it has the largest spin splitting and longest valley coherence time among all the known monolayer transition-metal dichalcogenides (TMDs). To obtain the large-area monolayer TMDs' crystal is the first step to manufacture scalable and high-performance electronic devices. In this letter, we have successfully fabricated millimeter-sized monolayer WSe2 single crystals with very high quality, based on our improved mechanical exfoliation method. With such superior samples, using standard high resolution angle-resolved photoemission spectroscopy, we did comprehensive electronic band structure measurements on our monolayer WSe2. The overall band features point it to be a 1.2eV direct band gap semiconductor. Its spin-splitting of the valence band at K point is found as 460 meV, which is 30 meV less than the corresponding band splitting in its bulk counterpart. The effective hole masses of valence bands are determined as 2.344 me at Gamma, and 0.529 me as well as 0.532 me at K for the upper and lower branch of splitting bands, respectively. And screening effect from substrate is shown to substantially impact on the electronic properties. Our results provide important insights into band structure engineering in monolayer TMDs. Our monolayer WSe2 crystals may constitute a valuable device platform.

cond-mat.mes-hall↗

arXiv2019

Evidence for an Additional Symmetry Breaking from Direct Observation of Band Splitting in the Nematic State of FeSe Superconductor

The iron-based superconductor FeSe has attracted much recent attention because of its simple crystal structure, distinct electronic structure and rich physics exhibited by itself and its derivatives. Determination of its intrinsic electronic structure is crucial to understand its physical properties and superconductivity mechanism. Both theoretical and experimental studies so far have provided a picture that FeSe consists of one hole-like Fermi surface around the Brillouin zone center in its nematic state. Here we report direct observation of two hole-like Fermi surface sheets around the Brillouin zone center, and the splitting of the associated bands, in the nematic state of FeSe by taking high resolution laser-based angle-resolved photoemission measurements. These results indicate that, in addition to nematic order and spin-orbit coupling, there is an additional order in FeSe that breaks either inversion or time reversal symmetries. The new Fermi surface topology asks for reexamination of the existing theoretical and experimental understanding of FeSe and stimulates further efforts to identify the origin of the hidden order in its nematic state.

cond-mat.supr-con↗

arXiv2019

Selective Hybridization between Main Band and Superstructure Band in Bi$_2$Sr$_2$CaCu$_2$O$_{8+δ}$ Superconductor

High-resolution laser-based angle-resolved photoemission measurements have been carried out on Bi$_2$Sr$_2$CaCu$_2$O$_{8+δ}$ (Bi2212) and Bi$_2$Sr$_{2-x}$La$_x$CuO$_{6+δ}$ (Bi2201) superconductors. Unexpected hybridization between the main band and the superstructure band in Bi2212 is clearly revealed. In the momentum space where one main Fermi surface intersects with one superstructure Fermi surface, four bands are observed instead of two. The hybridization exists in both superconducting state and normal state, and in Bi2212 samples with different doping levels. Such a hybridization is not observed in Bi2201. This phenomenon can be understood by considering the bilayer splitting in Bi2212, the selective hybridization of two bands with peculiar combinations, and the altered matrix element effects of the hybridized bands. These observations provide strong evidence on the origin of the superstructure band which is intrinsic to the CuO$_2$ planes. Therefore, understanding physical properties and superconductivity mechanism in Bi2212 should consider the complete Fermi surface topology which involves the main bands, the superstructure bands and their interactions.

cond-mat.supr-con↗

arXiv2019

Community Microgrid Planning Considering Building Thermal Dynamics

In this paper, the building thermal dynamic characteristics are introduced in the community microgrid (MG) planning model. The proposed planning model is formulated as a mixed integer linear programming (MILP) which seeks to determine the optimal deployment strategy for various distributed energy resources (DER). The objective is to minimize the annualized cost of community MG, including investment cost in DER, operation cost for dispatchable fuel-generators (DFG), energy storage system (ESS) degradation cost, energy purchasing and peak demand charge at PCC, customer discomfort cost due to the room temperature deviation and load curtailment cost. Given the slow thermal dynamic characteristics of buildings, the heating, ventilation and air-conditioning (HVAC) system in the proposed model is treated as a demand side management (DSM) component, whose dispatch commands are provided by the central MG controller. Numerical results based on a community MG comprising of 20 residential buildings demonstrate the effectiveness of the proposed planning model and the benefits of introducing the building thermal dynamic model.

math.OC↗

arXiv2019

High Precision Determination of the Planck Constant by Modern Photoemission Spectroscopy

The Planck constant, with its mathematical symbol $h$, is a fundamental constant in quantum mechanics that is associated with the quantization of light and matter. It is also of fundamental importance to metrology, such as the definition of ohm and volt, and the latest definition of kilogram. One of the first measurements to determine the Planck constant is based on the photoelectric effect, however, the values thus obtained so far have exhibited a large uncertainty. The accepted value of the Planck constant, 6.62607015$\times$10$^{-34}$ J$\cdot$s, is obtained from one of the most precise methods, the Kibble balance, which involves quantum Hall effect, Josephson effect and the use of the International Prototype of the Kilogram (IPK) or its copies. Here we present a precise determination of the Planck constant by modern photoemission spectroscopy technique. Through the direct use of the Einstein's photoelectric equation, the Planck constant is determined by measuring accurately the energy position of the gold Fermi level using light sources with various photon wavelengths. The precision of the measured Planck constant, 6.62610(13)$\times$10$^{-34}$ J$\cdot$s, is four to five orders of magnitude improved from the previous photoelectric effect measurements. It has rendered photoemission method to become one of the most accurate methods in determining the Planck constant. We propose that this direct method of photoemission spectroscopy has advantages and a potential to further increase its measurement precision of the Planck constant to be comparable to the most accurate methods that are available at present.

physics.ins-det↗

arXiv2019

Evolution of Incommensurate Superstructure and Electronic Structure with Pb Substitution in (Bi$_{2-x}$Pb$_{x}$)Sr$_2$CaCu$_2$O$_{8+δ}$ Superconductors

High-quality Bi$_{2-x}$Pb$_{x}$Sr$_2$CaCu$_2$O$_{8+δ}$ (Bi2212) single crystals have been successfully grown by the traveling solvent floating zone technique with a wide range of Pb substitution ($x=0-0.8$). The samples are characterized by transmission electron microscope (TEM) and measured by high resolution laser-based angle-resolved photoemission spectroscopy (ARPES) with different photon energies. A systematic evolution of the electronic structure and superstructure with Pb substitution has been revealed for the first time. The superstructure shows a significant change with Pb substitution and the incommensurate modulation vector ($\textbf{Q}$) decreases with increasing Pb substitution. In the meantime, the superstructure intensity from ARPES measurements also decreases dramatically with increasing Pb concentration. The superstructure in Bi2212 can be effectively suppressed by Pb substitution and it nearly disappears with a Pb substitution of $x=0.8$. We also find that the superstructure bands in ARPES measurements depend sensitively on the photon energy of lasers used; they can become even stronger than the main band when using a laser photon energy of 10.897 eV. These results provide important information on the origin of the incommensurate superstructure and its control and suppression in bismuth-based high temperature superconductors.

cond-mat.supr-con↗

arXiv2019

Distinct Superconducting Gap on Two Bilayer-Split Fermi Surface Sheets in $Bi_2Sr_2CaCu_2O_{8+δ}$ Superconductor

High resolution laser-based angle-resolved photoemission measurements were carried out on an overdoped $Bi_2Sr_2CaCu_2O_{8+δ}$ superconductor with a Tc of 75 K. Two Fermi surface sheets caused by bilayer splitting are clearly identified with rather different doping levels: the bonding sheet corresponds to a doping level of 0.14 which is slightly underdoped while the antibonding sheet has a doping of 0.27 that is heavily overdoped, giving an overall doping level of 0.20 for the sample. Different superconducting gap sizes on the two Fermi surface sheets are revealed for the first time. The superconducting gap on the antibonding Fermi surface sheet follows a standard d-wave form while it deviates from the standard d-wave form for the bonding Fermi surface sheet. The maximum gap difference between the two Fermi surface sheets near the antinodal region is $\sim$2 meV. These observations provide important information for studying the relationship between the Fermi surface topology and superconductivity, and the layer-dependent superconductivity in high temperature cuprate superconductors.

cond-mat.supr-con↗

arXiv2019

Mn2C monolayer: hydrogenation/oxygenation induced strong room-temperature ferromagnetism and potential applications

Two-dimensional ferromagnetic materials with strong ferromagnetism and high Curie temperature are significantly desired for the applications of nanoscale devices. Here, based on first-principles computations, we report hydrogenated/oxygenated Mn2C monolayer is a such material with strong room-temperature ferromagnetism. The bare Mn2C monolayer is an antiferromagnetic metal with the local magnetic moment of Mn ~ 3μB. However, the antiferromagnetic coupling of Mn atoms can transform into the ferromagnetic order under hydrogenation/oxygenation. Especially, the magnetic moments in hydrogenated/oxygenated Mn2C monolayer can be as large as 6 μB per unit cell, and the Curie temperatures are above 290K. Beside the potential applications in spintronic devices, our work suggests that Mn2C monolayer is also promising to be used in hydrogen/oxygen detection and removal devices.

cond-mat.mtrl-sci↗

arXiv2019

Identification of a Large Amount of Excess Fe in Superconducting Single-Layer FeSe/SrTiO3 Films

The single-layer FeSe films grown on SrTiO3 (STO) substrates have attracted much attention because of its record high superconducting critical temperature (Tc). It is usually believed that the composition of the epitaxially grown single-layer FeSe/STO films is stoichiometric, i.e., the ratio of Fe and Se is 1:1. Here we report the identification of a large amount of excess Fe in the superconducting single-layer FeSe/STO films. By depositing Se onto the superconducting single-layer FeSe/STO films, we find by in situ scanning tunneling microscopy (STM) the formation of the second-layer FeSe islands on the top of the first layer during the annealing process at a surprisingly low temperature ($\sim$150°C) which is much lower than the usual growth temperature ($\sim$490°C). This observation is used to detect excess Fe and estimate its quantity in the single-layer FeSe/STO films. The amount of excess Fe detected is at least 20% that is surprisingly high for the superconducting single-layer FeSe/STO films. The discovery of such a large amount of excess Fe should be taken into account in understanding the high-Tc superconductivity and points to a likely route to further enhance Tc in the superconducting single-layer FeSe/STO films.

cond-mat.supr-con↗

arXiv2019

Emergence of Superconductivity from Fully Incoherent Normal State in an Iron-Based Superconductor (Ba$_{0.6}$K$_{0.4}$)Fe$_2$As$_2$

In unconventional superconductors, it is generally believed that understanding the physical properties of the normal state is a pre-requisite for understanding the superconductivity mechanism. In conventional superconductors like niobium or lead, the normal state is a Fermi liquid with a well-defined Fermi surface and well-defined quasipartcles along the Fermi surface. Superconductivity is realized in this case by the Fermi surface instability in the superconducting state and the formation and condensation of the electron pairs (Cooper pairing). The high temperature cuprate superconductors, on the other hand, represent another extreme case that superconductivity can be realized in the underdoped region where there is neither well-defined Fermi surface due to the pseudogap formation nor quasiparticles near the antinodal regions in the normal state. Here we report a novel scenario that superconductivity is realized in a system with well-defined Fermi surface but without quasiparticles along the Fermi surface in the normal state. High resolution laser-based angle-resolved photoemission measurements have been performed on an optimally-doped iron-based superconductor (Ba$_{0.6}$K$_{0.4}$)Fe$_2$As$_2$. We find that, while sharp superconducting coherence peaks emerge in the superconducting state on the hole-like Fermi surface sheets, no quasiparticle peak is present in the normal state. Its electronic behaviours deviate strongly from a Fermi liquid system. The superconducting gap of such a system exhibits an unusual temperature dependence that it is nearly a constant in the superconducting state and abruptly closes at T$_c$. These observations have provided a new platform to study unconventional superconductivity in a non-Fermi liquid system.

cond-mat.supr-con↗

arXiv2019

Disappearance of Superconductivity and a Concomitant Lifshitz Transition in Heavily-Overdoped Bi2Sr2CuO6 Superconductor Revealed by Angle-Resolved Photoemission Spectroscopy

By partially doping Pb to effectively suppress the superstructure in single-layered cuprate Bi2Sr2CuO6+δ(Pb-Bi2201) and annealing them in vacuum or in high pressure oxygen atmosphere, a series of high quality Pb-Bi2201 single crystals are obtained with Tc covering from 17 K to non-supercondcuting in the overdoped region. High resolution angle resolved photoemission spectroscopy (ARPES) measurements are carried out on these samples to investigate the evolution of the Fermi surface topology with doping in the normal state. Clear and complete Fermi surface are observed and quantitatively analyzed in all these overdoped Pb-Bi2201 samples. A Lifshitz transition from hole-like Fermi surface to electron like Fermi surface with increasing doping is observed at a doping level of ~0.35. This transition coincides with the change that the sample undergoes from superconducting to non-superconducting states. Our results reveal the emergence of an electron-like Fermi surface and the existence of a Lifshitz transition in heavily overdoped Bi2201 samples. They provide important information in understanding the connection between the disappearance of superconductivity and the Lifshitz transition in the overdoped region.

cond-mat.supr-con↗

arXiv2018

Two-Dimensional GaN: An Excellent Electrode Material Providing Fast Ion Diffusion and High Storage Capacity for Li-Ion and Na-Ion Batteries

Identifying applicable anode materials is a significant task for Li- and Na-ion battery (LIB and NIB) technologies. We propose the GaN monolayer (2D GaN) can be a good anode candidate. The GaN monolayer manifests stable Li/Na adsorption and inherently low theoretical voltages. Most excitingly, both high storage capacity and extremely fast Li/Na diffusion can be simultaneously realized in the GaN monolayer. For Li, the storage capacity and diffusion barrier is 938 mA h g-1 and 80 meV , respectively. And the values for Na are 625 mA h g-1 and 22 meV. Comparing with known 2D anode materials with similar scale of ion diffusion barriers, the GaN monolayer almost possesses the highest Li/Na storage capacity discovered to date. Our work suggests that the 2D GaN is a prospective anode material offering fast ion diffusion and high storage capacity.

cond-mat.mtrl-sci↗

arXiv2018

Topological Phase with Critical-Type Nodal Line State in Intermetallic CaPd

In recent years, realizing new topological phase of matter has been a hot topic in the fields of physics and materials science. Topological semimetals and metals can conventionally be classified into two types: type-I and type-II according to the tilting degree of the fermion cone. Here, it is the first time to report a new topological metal phase with the critical-type nodal line between type-I and type-II nodal line. The critical-type nodal line shows a unique nontrivial band crossing which is composed of a at band and a dispersive band and leads to a new fermionic state. We propose intermetallic CaPd can be an existing topological metal for the new fermionic state, characterized with critical-type nodal line in the bulk and drumhead band structure on the surface. Our work not only promotes the concept of critical-type nodal line, but also provides the material realization to study its exotic properties in future experiments.

cond-mat.mes-hall↗