arXiv subjects

Guofeng Qu

Publications and source records attributed to Guofeng Qu.

6 recordsLinked to original sources

arXiv2026

Optimized design of a Penning ion source for sealed neutron tube

Sealed neutron tubes have a wide range of applications, and the ion source is their core component. Penning ion sources commonly suffer from issues such as uneven magnetic field distribution and a low proportion of monoatomic ions. Improving the performance of the ion source can effectively address the problems of low neutron flux and short operational lifespan. This study aims to optimise the magnetic field configuration and discharge parameters of the ion source, thereby increasing the proportion of monoatomic and enhancing discharge stability, and to provide a design basis for high-performance sealed neutron tubes. Develop a magnetic field-plasma coupling model to compare and analyze the magnetic field distribution patterns of traditional magnetic block structures and soft iron-reinforced structures, and investigate the mechanisms by which operating pressure and anode voltage affect plasma density and ion composition using COMSOL multiphysics simulation methods. Simulation results indicate that the soft iron structure significantly enhances the axial magnetic field strength and uniformity within the discharge region; under conditions of 0.06 Pa gas pressure and 1500 V anode voltage, the proportion of monoatomic ions increased from the conventional 9% to 30%.

physics.plasm-ph↗

arXiv2026

A Method for Neutron-Gamma Pulse Shape Discrimination of CLYC Detector Based on a Gated Residual-Linear Attention Network

The discrimination of neutron and gamma pulse shapes is a key technology in fields such as nuclear safety monitoring and radiation assessment. An enhanced recursive gated cyclic residual-sparse linear attention network is developed on the CLYC detector experimental platform to overcome weak noise resistance, limited feature extraction and inferior real-time performance of conventional algorithms. The experimental dataset comprises 19,971 samples, which were pre-processed and stratified for model training and testing. Results indicate that the proposed algorithm achieves a quality factor of 2.2, with a classification accuracy of 98.7% and a recall rate of 99.4%. It achieves an accuracy of 95.1% under the 20 dB low signal-to-noise ratio condition, exhibiting excellent anti-noise ability.With around 2.8 million parameters, the model takes merely 0.05 ms to process a single pulse on GPU, satisfying real-time monitoring and embedded deployment demands.

physics.ins-det↗

arXiv2026

Compatibility and Accuracy Verification of CADmesh-Based Complex Geometry Modeling in Geant4

Geant4 Monte Carlo simulation relies on the Constructive Solid Geometry (CSG) method for complex geometric modeling. This method has low efficiency and a high application threshold. Importing triangular facet formats such as STL/OBJ via CADmesh is a promising alternative, but systematic evaluations of format compatibility, geometric accuracy, and physical simulation deviations are lacking. Construct open-source experimental environment based on Geant4 11.0, CADmesh 1.3.0 and FreeCAD 1.0. We design high and low precision gradient test cases using simple geometric bodies and complex engineering models, and systematically evaluate the import success rate, facet loss rate, volume error, and particle transport dose deviation for STL and OBJ formats.The results show a 100% import success rate for both formats; the volume error rate is <= 0.018% for high-precision models and <= 0.288% for low-precision models. The two formats share the same vertex facet data structure. This study designs a general adaptive interface. The interface reduces the number of parsing code lines by about 70% and maintains geometric accuracy.Furthermore, the tetrahedral mesh loading takes 3.1 times longer than tessellated solids, but the simulation time can be reduced from 15194.3 s to 77.28 s.

cs.GR↗

arXiv2025

Trapping of electrons and $^{40}\textrm{Ca}^+$ ions in a dual-frequency Paul trap

We demonstrate the operation of a dual-frequency Paul trap and characterize its performance by storing either electrons or calcium ions while applying two quadrupole fields simultaneously which oscillate at $\Omega_\textrm{fast} = 2\pi \times 1.6$ GHz and $\Omega_\textrm{slow} = 2\pi \times 2$ MHz. The particles are loaded and stored in the trap under various conditions followed by detection employing an electron multiplier tube. We find that tens of electrons or ions can be trapped for up to ten milliseconds and a small fraction remains trapped even after hundreds of milliseconds. During dual-frequency operation we find that while the number of trapped electrons rapidly decreases with increase of the $\Omega_\textrm{slow}$ field amplitude, the number of trapped ions shows no dependence on the $\Omega_\textrm{fast}$ field amplitude as supported by our extensive numerical simulations. We aim to use a similar trap for synthesising antihydrogen from antiprotons and positrons. Accordingly, we discuss open challenges such as the co-trapping of oppositely charged species and particle trap duration.

physics.atom-ph↗

arXiv2025

Levitated Sensor for Magnetometry in Ambient Environment

Levitated particle systems have gained significant attention as a rapidly advancing platform for precision sensing, offering low-loss, highly isolated environments by eliminating mechanical contact and associated noise. Current room-temperature levitation techniques are primarily sensitive to acceleration, with magnetic sensing often relying on the Meissner effect, which is impractical under ambient conditions. Here, we demonstrate a diamagnetically stabilized magnetically levitated magnet magnetometer (LeMaMa), where the motion of the magnet is detected optically. Leveraging strong spin-lattice coupling in the ferromagnet to suppress spin-projection noise and minimizing dissipation through levitation, we achieve a sensitivity of 32 fT $/Hz^{1/2}$. This sensitivity is adequate for a wide range of applications in biology, chemistry, and fundamental physics, matching the performance of leading technologies like SQUIDs and atomic magnetometers, while offering the distinct advantage of operating at room temperature and under Earth's magnetic field.

physics.ins-det↗

arXiv2014

The simulation of loss of U ions due to charge changing processes in the CSRm ring

Significant beam loss caused by the charge exchange processes and ions impact induced outgassing play a crucial role in the limitation of the maximum number of accumulated heavy ions during the high intensity operation in the accelerators. With the aim to control beam loss due to charge exchange processes and to confine the generated desorption gas, the tracking of the loss positions and installing the absorber blocks with low-desorption rate material at appropriate locations in the CSRm ring will be taken. The loss simulation of U ions having lost an electron will be presented in this report and the calculation of the collimation efficiency of the CSRm ring will be continued in the future.

physics.acc-ph↗