arXiv subjects

Guoqiang Yu

Publications and source records attributed to Guoqiang Yu.

At least 55 records · Page 3Linked to original sources

arXiv2019

Generation and Hall effect of skyrmions enabled via using nonmagnetic point contacts

To enable functional skyrmion based spintronic devices, the controllable generation and manipulation of skyrmions is essential. While the generation of skyrmions by using a magnetic geometrical constriction has already been demonstrated, this approach is difficult to combine with a subsequent controlled manipulation of skyrmions. The high efficiency of skyrmion generation from magnetic constrictions limits the useful current density, resulting in stochastic skyrmion motion, which may obscure topological phenomena such as the skyrmion Hall effect. In order to address this issue, we designed a nonmagnetic conducting Ti/Au point contact in devices made of Ta/CoFeB/TaOx trilayer films. By applying high voltage pulses, we experimentally demonstrated that skyrmions can be dynamically generated. Moreover, the accompanied spin topology dependent skyrmion dynamics, the skyrmion Hall effect is also experimentally observed in the same devices. The creation process has been numerically reproduced through micromagnetic simulations in which the important role of skyrmion-antiskyrmion pair generation is identified. The motion and Hall effect of the skyrmions, immediately after their creation is described using a modified Thiele equation after taking into account the contribution from spatially inhomogeneous spin-orbit torques and the Magnus force. The simultaneous generation and manipulation of skyrmions using a nonmagnetic point contact could provide a useful pathway for designing novel skyrmion based devices.

cond-mat.mes-hall↗

arXiv2019

Current-driven magnetization switching in a van der Waals ferromagnet Fe3GeTe2

The recent discovery of ferromagnetism in two-dimensional (2D) van der Waals (vdW) materials holds promises for novel spintronic devices with exceptional performances. However, in order to utilize 2D vdW magnets for building spintronic nanodevices such as magnetic memories, key challenges remain in terms of effectively switching the magnetization from one state to the other electrically. Here, we devise a bilayer structure of Fe3GeTe2/Pt, in which the magnetization of few-layered Fe3GeTe2 can be effectively switched by the spin-orbit torques (SOTs) originated from the current flowing in the Pt layer. The effective magnetic fields corresponding to the SOTs are further quantitatively characterized using harmonic measurements. Our demonstration of the SOT-driven magnetization switching in a 2D vdW magnet could pave the way for implementing low-dimensional materials in the next-generation spintronic applications.

cond-mat.mes-hall↗

arXiv2018

Single spin sensing of domain wall structure and dynamics in a thin film skyrmion host

Skyrmions are nanoscale magnetic structures with features promising for future low-power memory or logic devices. In this work, we demonstrate novel scanning techniques based on nitrogen vacancy center magnetometry that simultaneously probe both the magnetic dynamics and structure of room temperature skyrmion bubbles in a thin film system Ta/CoFeB/MgO. We confirm the handedness of the Dzyaloshinskii-Moriya interaction in this material and extract the helicity angle of the skyrmion bubbles. Our measurements also show that the skyrmion bubbles in this material change size in discrete steps, dependent on the local pinning environment, with their average size determined dynamically as their domain walls hop between pinning sites. In addition, an increase in magnetic field noise is observed near all skyrmion bubble domain walls. These measurements highlight the importance of interactions between internal degrees of freedom of skyrmion bubble domain walls and pinning sites in thin film systems. Our observations have relevance for future devices based on skyrmion bubbles where pinning interactions will determine important aspects of current-driven motion.

cond-mat.mes-hall↗

arXiv2018

Strong Rashba-Edelstein Effect-Induced Spin-Orbit Torques in Monolayer Transition-Metal Dichalcogenide/Ferromagnet Bilayers

The electronic and optoelectronic properties of two dimensional materials have been extensively explored in graphene and layered transition metal dichalcogenides (TMDs). Spintronics in these two-dimensional materials could provide novel opportunities for future electronics, for example, efficient generation of spin current, which should enable the efficient manipulation of magnetic elements. So far, the quantitative determination of charge current induced spin current and spin-orbit torques (SOTs) on the magnetic layer adjacent to two-dimensional materials is still lacking. Here, we report a large SOT generated by current-induced spin accumulation through the Rashba-Edelstein effect in the composites of monolayer TMD (MoS$_2$ or WSe$_2$)/CoFeB bilayer. The effective spin conductivity corresponding to the SOT turns out to be almost temperature-independent. Our results suggest that the charge-spin conversion in the chemical vapor deposition-grown large-scale monolayer TMDs could potentially lead to high energy efficiency for magnetization reversal and convenient device integration for future spintronics based on two-dimensional materials.

cond-mat.mes-hall↗

arXiv2018

Correlation between Dzyaloshinskii Moriya interaction and spin mixing conductance at antiferromagnet / ferromagnet interface

The rich interaction phenomena at antiferromagnet (AFM)/ ferromagnet (FM) interfaces are key ingredients in AFM spintronics, where many underlying mechanisms remain unclear. Here we report a correlation observed between interfacial Dzyaloshinskii-Moriya interaction (DMI) Ds and effective spin mixing conductance g at IrMn/CoFeB interface. Both Ds and g are quantitatively determined with Brillouin light scattering measurements, and increase with IrMn thickness in the range of 2.5~7.5 nm. Such correlation likely originates from the AFM-states-mediated spin-flip transitions in FM, which promote both interfacial DMI and spin pumping effect. Our findings provide deeper insight into the AFM-FM interfacial coupling for future spintronic design.

cond-mat.mtrl-sci↗

arXiv2018

Role of dimensional crossover on spin-orbit torque efficiency in magnetic insulator thin films

Magnetic insulators (MIs) attract tremendous interest for spintronic applications due to low Gilbert damping and absence of Ohmic loss. Magnetic order of MIs can be manipulated and even switched by spin-orbit torques (SOTs) generated through spin Hall effect and Rashba-Edelstein effect in heavy metal/MI bilayers. SOTs on MIs are more intriguing than magnetic metals since SOTs cannot be transferred to MIs through direct injection of electron spins. Understanding of SOTs on MIs remains elusive, especially how SOTs scale with the film thickness. Here, we observe the critical role of dimensionality on the SOT efficiency by systematically studying the MI layer thickness dependent SOT efficiency in tungsten/thulium iron garnet (W/TmIG) bilayers. We first show that the TmIG thin film evolves from two-dimensional to three-dimensional magnetic phase transitions as the thickness increases, due to the suppression of long-wavelength thermal fluctuation. Then, we report the significant enhancement of the measured SOT efficiency as the thickness increases. We attribute this effect to the increase of the magnetic moment density in concert with the suppression of thermal fluctuations. At last, we demonstrate the current-induced SOT switching in the W/TmIG bilayers with a TmIG thickness up to 15 nm. The switching current density is comparable with those of heavy metal/ferromagnetic metal cases. Our findings shed light on the understanding of SOTs in MIs, which is important for the future development of ultrathin MI-based low-power spintronics.

cond-mat.mes-hall↗

arXiv2017

Strain-mediated spin-orbit torque switching for magnetic memory

Spin-orbit torque (SOT) represents an energy efficient method to control magnetization in magnetic memory devices. However, deterministically switching perpendicular memory bits usually requires the application of an additional bias field for breaking lateral symmetry. Here we present a new approach of field-free deterministic perpendicular switching using a strain-mediated SOT switching method. The strain-induced magnetoelastic anisotropy breaks the lateral symmetry, and the resulting symmetry-breaking is controllable. A finite element model and a macrospin model are used to numerically simulate the strain-mediated SOT switching mechanism. The results show that a relatively small voltage (${\pm}0.5$ V) along with a modest current ($3.5 \times 10^{7} A/cm^{2}$) can produce a 180° perpendicular magnetization reversal. The switching direction (up or down) is dictated by the voltage polarity (positive or negative) applied to the piezoelectric layer in the magnetoelastic/heavy metal/piezoelectric heterostructure. The switching speed can be as fast as 10 GHz. More importantly, this control mechanism can be potentially implemented in a magnetic random-access memory system with small footprint, high endurance and high tunnel magnetoresistance (TMR) readout ratio.

physics.app-ph↗

arXiv2017

Scaling of Dzyaloshinskii Moriya interaction at heavy metal and ferromagnetic metal interfaces

The Dzyaloshinskii Moriya Interaction (DMI) at the heavy metal (HM) and ferromagnetic metal (FM) interface has been recognized as a key ingredient in spintronic applications. Here we investigate the chemical trend of DMI on the 5d band filling (5d^3~5d^10) of the HM element in HM/CoFeB/MgO multilayer thin films. DMI is quantitatively evaluated by measuring asymmetric spin wave dispersion using Brillouin light scattering. Sign reversal and 20 times modification of the DMI coefficient D have been measured as the 5d HM element is varied. The chemical trend can be qualitatively understood by considering the 5d and 3d bands alignment at the HM/FM interface and the subsequent orbital hybridization around the Fermi level. Furthermore, a positive correlation is observed between DMI and spin mixing conductance at the HM/FM interfaces. Our results provide new insights into the interfacial DMI for designing future spintronic devices.

cond-mat.mtrl-sci↗

arXiv2017

Dzyaloshinskii Moriya interaction across antiferromagnet / ferromagnet interface

The antiferromagnet (AFM) / ferromagnet (FM) interfaces are of central importance in recently developed pure electric or ultrafast control of FM spins, where the underlying mechanisms remain unresolved. Here we report the direct observation of Dzyaloshinskii Moriya interaction (DMI) across the AFM/FM interface of IrMn/CoFeB thin films. The interfacial DMI is quantitatively measured from the asymmetric spin wave dispersion in the FM layer using Brillouin light scattering. The DMI strength is enhanced by a factor of 7 with increasing IrMn layer thickness in the range of 1- 7.5 nm. Our findings provide deeper insight into the coupling at AFM/FM interface and may stimulate new device concepts utilizing chiral spin textures such as magnetic skyrmions in AFM/FM heterostructures.

cond-mat.mtrl-sci↗

arXiv2017

Deficiency of the Bulk Spin Hall Effect Model for Spin-Orbit Torques in Magnetic Insulator/Heavy Metal Heterostructures

Electrical currents in a magnetic insulator/heavy metal heterostructure can induce two simultaneous effects, namely, spin Hall magnetoresistance (SMR) on the heavy metal side and spin-orbit torques (SOTs) on the magnetic insulator side. Within the framework of the pure spin current model based on the bulk spin Hall effect (SHE), the ratio of the spin Hall-induced anomalous Hall effect (SH-AHE) to SMR should be equal to the ratio of the field-like torque (FLT) to damping-like torque (DLT). We perform a quantitative study of SMR, SH-AHE, and SOTs in a series of thulium iron garnet/platinum or Tm3Fe5O12/Pt heterostructures with different Tm3Fe5O12 thicknesses, where Tm3Fe5O12 is a ferrimagnetic insulator with perpendicular magnetic anisotropy. We find the ratio between measured effective fields of FLT and DLT is at least 2 times larger than the ratio of the SH-AHE to SMR. In addition, the bulk SHE model grossly underestimates the spin torque efficiency of FLT. Our results reveal deficiencies of the bulk SHE model and also address the importance of interfacial effects such as the Rashba and magnetic proximity effects in magnetic insulator/heavy metal heterostructures.

cond-mat.mtrl-sci↗

arXiv2016

Topological transitions induced by antiferromagnetism in a thin-film topological insulator

Ferromagnetism in topological insulators (TIs) opens a topologically non-trivial exchange band gap, providing an exciting platform to manipulate the topological order through an external magnetic field. Here, we experimentally show that the surface of an antiferromagnetic thin film can independently control the topological order of the top and the bottom surface states of a TI thin film through proximity couplings. During the magnetization reversal in a field scan, two intermediate spin configurations stem from unsynchronized magnetic switchings of the top and the bottom AFM/TI interfaces. These magnetic configurations are shown to result in new topological phases with non-zero Chern numbers for each surface, introducing two counter-propagating chiral edge modes inside the exchange gap. This change in the number of transport channels, as the result of the topological transitions, induces antisymmetric magneto-resistance spikes during the magnetization reversal. With the high Neel ordering temperature provided by the antiferromagnetic layers, the signature of the induced topological transition persists in transport measurements up to a temperature of around 90 K, a factor of three over the Curie temperature in a typical magnetically doped TI thin film.

cond-mat.mes-hall↗

arXiv2016

Interfacial Control of Dzyaloshinskii Moriya Interaction in Heavy Metal_Ferromagnetic Metal Thin Film Heterostructures

The interfacial Dzyaloshinskii Moriya Interaction (DMI) in ultrathin magnetic thin film heterostructures provides a new approach for controlling spin textures on mesoscopic length scales. Here we investigate the dependence of the interfacial DMI constant D on a Pt wedge insertion layer in Ta_CoFeB_Pt(wedge)_MgO thin films by observing the asymmetric spin wave dispersion using Brillouin light scattering. Continuous tuning of D by more than a factor of three is realized by inserting less than one monolayer of Pt. The observations provide new insights for designing magnetic thin film heterostructures with tailored D for controlling skyrmions and magnetic domain wall chirality and dynamics.

cond-mat.mtrl-sci↗

arXiv2016

Direct Observation of the Skyrmion Hall Effect

The well-known Hall effect describes the transverse deflection of charged particles (electrons or holes) in an electric-current carrying conductor under the influence of perpendicular magnetic fields, as a result of the Lorentz force. Similarly, it is intriguing to examine if quasi-particles without an electric charge, but with a topological charge, show related transverse motion. Chiral magnetic skyrmions with a well-defined spin topology resulting in a unit topological charge serve as good candidates to test this hypothesis. In spite of the recent progress made on investigating magnetic skyrmions, direct observation of the skyrmion Hall effect in real space has, remained elusive. Here, by using a current-induced spin Hall spin torque, we experimentally observe the skyrmion Hall effect by driving skyrmions from creep motion into the steady flow motion regime. We observe a Hall angle for the magnetic skyrmion motion as large as 15 degree for current densities smaller than 10 MA/cm^(2) at room temperature. The experimental observation of transverse transport of skyrmions due to topological charge may potentially create many exciting opportunities for the emerging field of skyrmionics, including novel applications such as topological selection.

cond-mat.mes-hall↗

arXiv2016

Mobile Néel skyrmions at room temperature: status and future

Magnetic skyrmions are topologically protected spin textures that exhibit many fascinating features. As compared to the well-studied cryogenic Bloch skyrmions in bulk materials, we focus on the room-temperature Néel skyrmions in thin-film systems with an interfacial broken inversion symmetry in this article. Specifically, we show the stabilization, the creation, and the implementation of Néel skyrmions that are enabled by the electrical current-induced spin-orbit torques. Towards the nanoscale Néel skyrmions, we further discuss the challenges from both material optimization and imaging characterization perspectives.

cond-mat.mes-hall↗

arXiv2015

Electric-field control of spin-orbit torque in a magnetically doped topological insulator

Electric-field manipulation of magnetic order has proved of both fundamental and technological importance in spintronic devices. So far, electric-field control of ferromagnetism, magnetization and magnetic anisotropy has been explored in various magnetic materials, but the efficient electric-field control of spin-orbit torque (SOT) still remains elusive. Here, we report the effective electric-field control of a giant SOT in a Cr-doped topological insulator (TI) thin film using a top-gate FET structure. The SOT strength can be modulated by a factor of 4 within the accessible gate voltage range, and it shows strong correlation with the spin-polarized surface current in the film. Furthermore, we demonstrate the magnetization switching by scanning gate voltage with constant current and in-plane magnetic field applied in the film. The effective electric-field control of SOT and the giant spin-torque efficiency in Cr-doped TI may lead to the development of energy-efficient gate-controlled spin-torque devices compatible with modern field-effect semiconductor technologies.

cond-mat.str-el↗

arXiv2015

BACOM2: a Java tool for detecting normal cell contamination of copy number in heterogeneous tumor

We develop a cross-platform open-source Java application (BACOM2) with graphic user interface (GUI), and users also can use a XML file to set the parameters of algorithm model, file paths and the dataset of paired samples. BACOM2 implements the new entire pipeline of copy number change analysis for heterogeneous cancer tissues, including extraction of raw copy number signals from CEL files of paired samples, attenuation correction, identification of balanced AB-genotype loci, copy number detection and segmentation, global baseline calculation and absolute normalization, differentiation of deletion types, estimation of the normal tissue fraction and correction of normal tissue contamination. BACOM2 focuses on the common tools for data preparation and absolute normalization for copy number analysis of heterogeneous cancer tissues. The software provides an additional choice for scientists who require a user-friendly, high-speed processing, cross-platform computing environment for large copy number data analysis.

q-bio.GN↗

arXiv2015

Electric-field guiding of magnetic skyrmions

We theoretically study equilibrium and dynamic properties of nanosized magnetic skyrmions in thin magnetic films with broken inversion symmetry, where electric field couples to magnetization via spin-orbit coupling. Based on a symmetry-based phenomenology and micromagnetic simulations we show that this electric-field coupling, via renormalizing the micromagnetic energy, modifies the equilibrium properties of the skyrmion. This change, in turn, results in a significant alteration of the current-induced skyrmion motion. Particularly, speed and direction of the skyrmion can be manipulated by designing a desired energy landscape electrically, which we describe within Thiele's analytical model and demonstrate in micromagnetic simulations including electric-field-controlled magnetic anisotropy. We additionally use this electric-field control to construct gates for controlling skyrmion motion exhibiting a transistor-like and multiplexer-like function. The proposed electric-field effect can thus provide a low energy electrical knob to extend the reach of information processing with skyrmions.

cond-mat.mes-hall↗

arXiv2015

Blowing Magnetic Skyrmion Bubbles

Soap bubbles form when blowing air through a suspended thin film of soapy water and this phenomenon entertains children and adults alike. The formation of soap bubbles from thin films is accompanied by topological transitions, and thus the natural question arises whether this concept is applicable to the generation of other topological states. Here we show how a magnetic topological structure, namely a skyrmion bubble, can be generated in a solid state system in a similar manner. Beyond enabling the investigation of complex surface-tension driven dynamics in a novel physical system, this observation has also practical implications, since the topological charge of magnetic skyrmions has been envisioned as an information carrier for new data processing technologies. A main goal towards this end is the experimental creation and manipulation of individual mobile skyrmions at room temperature. By utilizing an inhomogeneous in-plane current in a system with broken inversion asymmetry, we experimentally blow magnetic skyrmion bubbles through a geometrical constriction. The presence of a spatially divergent spin-orbit torque gives rise to instabilities of the magnetic domain structures that are reminiscent of Rayleigh-Plateau instabilities in fluid flows. Experimentally we can determine the electric current versus magnetic field phase diagram for skyrmion formation and we reveal the efficient manipulation of these dynamically created skyrmions, including depinning and motion. The demonstrated current-driven transformation from stripe domains to magnetic skyrmion bubbles could provide additional avenues for implementing skyrmion-based spintronics.

cond-mat.mtrl-sci↗