arXiv subjects

Gustavo C. Buscaglia

Publications and source records attributed to Gustavo C. Buscaglia.

12 recordsLinked to original sources

arXiv2025

Numerical approximation of a PDE-constrained Optimization problem that appears in Data-Driven Computational Mechanics

We investigate an optimization problem that arises when working within the paradigm of Data-Driven Computational Mechanics. In the context of the diffusion-reaction problem, such an optimization problem seeks for the continuous primal fields (gradient and flux) that are closest to some predefined discrete fields taken from a material data set. The optimization is performed over primal fields that satisfy the physical conservation law and the geometrical compatibility. We consider a reaction term in the conservation law, which has the effect of coupling all the optimality conditions. We first establish the well-posedness in the continuous setting. Then, we propose stable finite element discretizations that consistently approximate the continuous formulation, preserving its saddle-point structure and allowing for equal-order interpolation of all fields. Finally, we demonstrate the effectiveness of the proposed methods through a set of numerical examples.

math.NA↗

arXiv2022

Chemoreception and chemotaxis of a three-sphere swimmer

The coupled problem of hydrodynamics and solute transport for the Najafi-Golestanian three-sphere swimmer is studied, with the Reynolds number set to zero and Péclet numbers (Pe) ranging from 0.06 to 60. The adopted method is the numerical simulation of the problem with a finite element code based upon the FEniCS library. For the swimmer executing the optimal locomotion gait, we report the Sherwood number as a function of Pe in homogeneous fluids and confirm that little gain in solute flux is achieved by swimming unless Pe is significantly larger than 10. We also consider the swimmer as an learning agent moving inside a fluid that has a concentration gradient. The outcomes of Q-learning processes show that learning locomotion (with the displacement as reward) is significantly easier than learning chemotaxis (with the increase of solute flux as reward). The chemotaxis problem, even at low Pe, has a varying environment that renders learning more difficult. Further, the learning difficulty increases severely with the Péclet number. The results demonstrate the challenges that natural and artificial swimmers need to overcome to migrate efficiently when exposed to chemical inhomogeneities.

cs.LG↗

arXiv2021

A finite element method for simulating soft active non-shearable rods immersed in generalized Newtonian fluids

We propose a finite element method for simulating one-dimensional solid models moving and experiencing large deformations while immersed in generalized Newtonian fluids. The method is oriented towards applications involving microscopic devices or organisms in the soft-bio-matter realm. By considering that the strain energy of the solid may explicitly depend on time, we incorporate a mechanism for active response. The solids are modeled as Cosserat rods, a detailed formulation being provided for the special case of a planar non-shearable rod. The discretization adopts one-dimensional Hermite elements for the rod and low-order Lagrange two-dimensional elements for the fluid's velocity and pressure. The fluid mesh is boundary-fitted, with remeshing at each time step. Several time marching schemes are studied, of which a semi-implicit scheme emerges as most effective. The method is demonstrated in very challenging examples: the roll-up of a rod to circular shape and later sudden release, the interaction of a soft rod with a fluid jet and the active self-locomotion of a sperm-like rod. The article includes a detailed description of a code that implements the method in the Firedrake library.

math.NA↗

arXiv2021

A multiscale Robin-coupled implicit method for two-phase flows in high-contrast formations

In the presence of strong heterogeneities, it is well known that the use of explicit schemes for the transport of species in a porous medium suffers from severe restrictions on the time step. This has led to the development of implicit schemes that are increasingly favoured by practitioners for their computational efficiency. The transport equation requires knowledge of the velocity field, which results from an elliptic problem (Darcy problem) that is the most expensive part of the computation. When considering large reservoirs, a cost-effective way of approximating the Darcy problems is using multiscale domain decomposition (MDD) methods. They allow for the pressure and velocity fields to be computed on coarse meshes (large scale), while detailed basis functions are defined locally, usually in parallel, in a much finer grid (small scale). In this work we adopt the Multiscale Robin Coupled Method (MRCM, [Guiraldello, et al., J. Comput. Phys., 355 (2018) pp. 1-21], [Rocha, et al., J. Comput. Phys., (2020) 109316]), which is a generalization of previous MDD methods that allows for great flexibility in the choice of interface spaces. In this article we investigate the combination of the MRCM with implicit transport schemes. A sequentially implicit strategy is proposed, with different trust-region algorithms ensuring the convergence of the transport solver. The method is assessed on several very stringent 2D two-phase problems, demonstrating its stability even for large time steps. It is also shown that the best accuracy is achieved by considering recently introduced non-polynomial interface spaces, since polynomial spaces are not optimal for high-contrast channelized permeability fields.

math.NA↗

arXiv2021

Towards HPC simulations of Billion-cell Reservoirs by Multiscale Mixed Methods

A three dimensional parallel implementation of Multiscale Mixed Methods based on non-overlapping domain decomposition techniques is proposed for multi-core computers and its computational performance is assessed by means of numerical experimentation. As a prototypical method, from which many others can be derived, the Multiscale Robin Coupled Method is chosen and its implementation explained in detail. Numerical results for problems ranging from millions up to more than 2 billion computational cells in highly heterogeneous anisotropic rock formations based on the SPE10 benchmark are shown. The proposed implementation relies on direct solvers for both local problems and the interface coupling system. We find good weak and strong scalalability as compared against a state-of-the-art global fine grid solver based on Algebric Multigrid preconditioning in single and two-phase flow problems.

math.NA↗

arXiv2021

Interface spaces based on physics for multiscale mixed methods applied to flows in fractured-like porous media

It is well known that domain-decomposition-based multiscale mixed methods rely on interface spaces, defined on the skeleton of the decomposition, to connect the solution among the non-overlapping subdomains. Usual spaces, such as polynomial-based ones, cannot properly represent high-contrast channelized features such as fractures (high permeability) and barriers (low permeability) for flows in heterogeneous porous media. We propose here new interface spaces, which are based on physics, to deal with permeability fields in the simultaneous presence of fractures and barriers, accommodated respectively, by the pressure and flux spaces. Existing multiscale methods based on mixed formulations can take advantage of the proposed interface spaces, however, in order to present and test our results, we use the newly developed Multiscale Robin Coupled Method (MRCM) [Guiraldello, et al., J. Comput. Phys., 355 (2018) pp. 1-21], which generalizes most well-known multiscale mixed methods, and allows for the independent choice of the pressure and flux interface spaces. An adaptive version of the MRCM [Rocha, et al., J. Comput. Phys., 409 (2020), 109316] is considered that automatically selects the physics-based pressure space for fractured structures and the physics-based flux space for regions with barriers, resulting in a procedure with unprecedented accuracy. The features of the proposed approach are investigated through several numerical simulations of single-phase and two-phase flows, in different heterogeneous porous media. The adaptive MRCM combined with the interface spaces based on physics provides promising results for challenging problems with the simultaneous presence of fractures and barriers.

math.NA↗

arXiv2019

Lagrangian statistics of pressure fluctuation events in homogeneous isotropic turbulence

Homogeneous and isotropic turbulent fields obtained from two DNS databases (with $\mbox{Re}_λ$ equal to 150 and 418) were seeded with point particles that moved with the local fluid velocity to obtain Lagrangian pressure histories. Motivated by cavitation inception modeling, the statistics of events in which such particles undergo low-pressure fluctuations were computed, parameterized by the amplitude of the fluctuations and by their duration. The main results are the average frequencies of these events and the probabilistic distribution of their duration, which are of predictive value. A connection is also established between these average frequencies and the pressure probability density function, thus justifying experimental methods proposed in the literature. Further analyses of the data show that the occurrence of very-low-pressure events is highly intermittent and is associated with worm-like vortical structures of length comparable to the integral scale of the flow.

physics.flu-dyn↗

arXiv2019

Simulating squirmers with volumetric solvers

Squirmers are models of a class of microswimmers, such as ciliated organisms and phoretic particles, that self-propel in fluids without significant deformation of their body shape. Available techniques for their simulation are based on the boundary-element method and do not contemplate nonlinearities such as those arising from the fluid's inertia or non-Newtonian rheology. This article describes a methodology to simulate squirmers that overcomes these limitations by using volumetric numerical methods, such as finite elements or finite volumes. It deals with interface conditions at the squirmer's surface that generalize those in the published literature. The actual procedures to be performed on a fluid solver to implement the proposed methodology are provided, including the treatment of metachronal surface waves. Among the several numerical examples, a two-dimensional simulation is shown of the hydrodynamic interaction of two individuals of Opalina ranarum.

math.NA↗

arXiv2018

A stable numerical strategy for Reynolds-Rayleigh-Plesset coupling

The coupling of Reynolds and Rayleigh-Plesset equations has been used in several works to simulate lubricated devices considering cavitation. The numerical strategies proposed so far are variants of a staggered strategy where Reynolds equation is solved considering the bubble dynamics frozen, and then the Rayleigh-Plesset equation is solved to update the bubble radius with the pressure frozen. We show that this strategy has severe stability issues and a stable methodology is proposed. The proposed methodology performance is assessed on two physical settings. The first one concerns the propagation of a decompression wave along a fracture considering the presence of cavitation nuclei. The second one is a typical journal bearing, in which the coupled model is compared with the Elrod-Adams model.

physics.flu-dyn↗

arXiv2015

Continuous and discrete inf-sup conditions for surface incompressibility of a deformable continuum

Surface incompressibility, also called inextensibility, imposes a zero-surface-divergence constraint on the velocity of a closed deformable material surface. The well-posedness of the mechanical problem under such constraint depends on an inf-sup or stability condition for which an elementary proof is provided. The result is also shown to hold in combination with the additional constraint of preserving the enclosed volume, or isochoricity. These continuous results are then applied to prove a modified discrete inf-sup condition that is crucial for the convergence of stabilized finite element methods.

math.NA↗

arXiv2014

A semi-implicit finite element method for viscous lipid membranes

We propose a robust simulation method for phospholipid membranes. It is based on a mixed three-field formulation that accounts for tangential fluidity (Boussinesq-Scriven law), bending elasticity (Canham-Helfrich model) and inextensibility. The unknowns are the velocity, vector curvature and surface pressure fields, all of which are interpolated with linear continuous finite elements. The method is semi-implicit - it requires the solution of a single linear system per time step. Conditional time stability is observed, with a time step restriction that scales as the square of the mesh size. Mesh quality and refinement are maintained by adaptively remeshing. Another ingredient is a numerical force that emulates the action of an optical tweezer, allowing for virtual interaction with the membrane. Extensive relaxation experiments are reported. Comparisons to exact shapes reveal the orders of convergence for position (5/3), vector curvature (3/2), surface pressure (1) and bending energy (2). Tweezing experiments are also presented. Convergence to the exact dynamics of a cylindrical tether is confirmed. Further tests illustrate the robustness of the method (six tweezers acting simultaneously) and the significance of viscous effects on membrane deformation under external forces.

math.NA↗

arXiv2010

Parametric study of the interface behavior between two immiscible liquids flowing through a porous medium

When two immiscible liquids that coexist inside a porous medium are drained through an opening, a complex flow takes place in which the interface between the liquids moves, tilts and bends. The interface profiles depend on the physical properties of the liquids and on the velocity at which they are extracted. If the drainage flow rate, the liquids volume fraction in the drainage flow and the physical properties of the liquids are known, the interface angle in the immediate vicinity of the outlet (theta) can be determined. In this work, we define four nondimensional parameters that rule the fluid dynamical problem and, by means of a numerical parametric analysis, an equation to predict theta is developed. The equation is verified through several numerical assessments in which the parameters are modified simultaneously and arbitrarily. In addition, the qualitative influence of each nondimensional parameter on the interface shape is reported.

physics.flu-dyn↗