arXiv subjects

Guyue Li

Publications and source records attributed to Guyue Li.

At least 19 recordsLinked to original sources

arXiv2026

Rapid LoRA Aggregation for Wireless Channel Adaptation in Open-Set Radio Frequency Fingerprinting

Radio frequency fingerprints (RFFs) enable secure wireless authentication but struggle in open-set scenarios with unknown devices and varying channels. Existing methods face challenges in generalization and incur high computational costs. We propose a lightweight, self-adaptive RFF extraction framework using Low-Rank Adaptation (LoRA). By pretraining LoRA modules per environment, our method enables fast adaptation to unseen channel conditions without full retraining. During inference, a weighted combination of LoRAs dynamically enhances feature extraction. Experimental results demonstrate a 15% reduction in equal error rate (EER) compared to non-finetuned baselines and an 83% decrease in training time relative to full fine-tuning, using the same training dataset. This approach provides a scalable and efficient solution for open-set RFF authentication in dynamic wireless vehicular networks.

eess.SP↗

arXiv2026

Secure Communication in MIMOME Movable-Antenna Systems with Statistical Eavesdropper CSI

This paper investigates the potential of movable antennas (MAs) to enhance physical layer security within a multiple-input multiple-output multiple-antenna eavesdropper (MIMOME) system. We consider a practical scenario where the transmitter operates with imperfect eavesdropper channel state information (ECSI), knowing only the instantaneous line-of-sight (LoS) component and the statistical properties of non-line-of-sight (NLoS) component. To rigorously quantify secrecy performance under the ECSI uncertainty, we adopt the ergodic secrecy rate (ESR) as the metric. Since deriving an exact analytical expression for the ESR is intractable, we leverage random matrix theory to derive a deterministic equivalent. This avoids heavy Monte Carlo simulations and also provides explicit insights into the effects of channel spatial statistics on secrecy performance. Building upon the deterministic equivalent, we formulate a joint maximization problem for the transmit precoding matrix and the antenna positions at the legitimate transmitter. To tackle the non-convexity of this optimization problem, we develop a comprehensive alternating optimization framework. Specifically, the precoding matrix is optimized via a majorization-minimization (MM) algorithm, where the gradient is computed by solving an implicit fixed-point equation. For the antenna position optimization, the complexity of the objective function prevents the construction of standard MM surrogate. To this end, we further propose a novel AMSGrad-based surrogate function that relies solely on gradient information. We provide a rigorous theoretical proof that guarantees the convergence of this proposed algorithm despite relaxing the strict majorization conditions.

cs.IT↗

arXiv2025

Channel-Robust RFF for Low-Latency 5G Device Identification in SIMO Scenarios

Ultra-low latency, the hallmark of fifth-generation mobile communications (5G), imposes exacting timing demands on identification as well. Current cryptographic solutions introduce additional computational overhead, which results in heightened identification delays. Radio frequency fingerprint (RFF) identifies devices at the physical layer, blocking impersonation attacks while significantly reducing latency. Unfortunately, multipath channels compromise RFF accuracy, and existing channel-resilient methods demand feedback or processing across multiple time points, incurring extra signaling latency. To address this problem, the paper introduces a new RFF extraction technique that employs signals from multiple receiving antennas to address multipath issues without adding latency. Unlike single-domain methods, the Log-Linear Delta Ratio (LLDR) of co-temporal channel frequency responses (CFRs) from multiple antennas is employed to preserve discriminative RFF features, eliminating multi-time sampling and reducing acquisition time. To overcome the challenge of the reliance on minimal channel variation, the frequency band is segmented into sub-bands, and the LLDR is computed within each sub-band individually. Simulation results indicate that the proposed scheme attains a 96.13% identification accuracy for 30 user equipments (UEs) within a 20-path channel under a signal-to-noise ratio (SNR) of 20 dB. Furthermore, we evaluate the theoretical latency using the Roofline model, resulting in the air interface latency of 0.491 ms, which satisfies ultra-reliable and low-latency communications (URLLC) latency requirements.

cs.CR↗

arXiv2025

Collusion-Driven Impersonation Attack on Channel-Resistant RF Fingerprinting

Radio frequency fingerprint (RFF) is a promising device identification technology, with recent research shifting from robustness to security due to growing concerns over vulnerabilities. To date, while the security of RFF against basic spoofing such as MAC address tampering has been validated, its resilience to advanced mimicry remains unknown. To address this gap, we propose a collusion-driven impersonation attack that achieves RF-level mimicry, successfully breaking RFF identification systems across diverse environments. Specifically, the attacker synchronizes with a colluding receiver to match the centralized logarithmic power spectrum (CLPS) of the legitimate transmitter; once the colluder deems the CLPS identical, the victim receiver will also accept the forged fingerprint, completing RF-level spoofing. Given that the distribution of CLPS features is relatively concentrated and has a clear underlying structure, we design a spoofed signal generation network that integrates a variational autoencoder (VAE) with a multi-objective loss function to enhance the similarity and deceptive capability of the generated samples. We carry out extensive simulations, validating cross-channel attacks in environments that incorporate standard channel variations including additive white Gaussian noise (AWGN), multipath fading, and Doppler shift. The results indicate that the proposed attack scheme essentially maintains a success rate of over 95% under different channel conditions, revealing the effectiveness of this attack.

cs.CR↗

arXiv2025

Fluid Antenna System-assisted Physical Layer Secret Key Generation

This paper investigates physical-layer key generation (PLKG) in multi-antenna base station systems, by leveraging a fluid antenna system (FAS) to dynamically customize radio environments. Without requiring additional nodes or extensive radio frequency chains, the FAS effectively enables adaptive antenna port selection by exploiting channel spatial correlation to enhance the key generation rate (KGR) at legitimate nodes. To comprehensively evaluate the efficiency of the FAS in PLKG, we propose an FAS-assisted PLKG model that integrates transmit beamforming and sparse port selection under independent and identically distributed and spatially correlated channel models, respectively. Specifically, the PLKG utilizes reciprocal channel probing to derive a closed-form KGR expression based on the mutual information between legitimate channel estimates. Nonconvex optimization problems for these scenarios are formulated to maximize the KGR subject to transmit power constraints and sparse port activation. We propose an iterative algorithm by capitalizing on successive convex approximation and Cauchy-Schwarz inequality to obtain a locally optimal solution. A reweighted $\ell_1$-norm-based algorithm is applied to advocate for the sparse port activation of FAS-assisted PLKG. Furthermore, a low-complexity sliding window-based port selection is proposed to substitute reweighted $\ell_1$-norm method based on Rayleigh-quotient analysis. Simulation results demonstrate that the FAS-PLKG scheme significantly outperforms the FA-PLKG scheme in both independent and spatially correlated environments. The sliding window-based port selection method introduced in this paper has been shown to yield superior KGR, compared to the reweighted $\ell_1$-norm method. It is shown that the FAS achieves higher KGR with fewer RF chains through dynamic sparse port selection.

cs.CR↗

arXiv2025

Physical Layer Group Key Generation With the Aid of Reconfigurable Intelligent Surfaces

Reconfigurable intelligent surfaces (RIS) have the ability to alter the wireless environment by making changes in the impinging signal. While RIS has been extensively studied for enhancing wireless communications, its potential for facilitating group key generation (GKG) remains unexplored. In this study, we exploit the RIS to make the aggregate reflecting channels of different user terminals (UTs) as similar as possible to be able to extract common group secret keys from their channels. Specifically, the RIS will adjust its parameters to pave the way for GKG based on the physical channels of the UTs. Our method exploits the already gathered channel state information (CSI) in the RIS to beneficially design the phase shifts and does not impose additional probing burden on the network. We consider both passive RIS (PRIS) and active RIS (ARIS) to generate the group keys. The PRIS is widely adopted in physical layer key generation (PLKG) studies due to its use of passive elements, whereas the ARIS demonstrates superior capability in aligning the aggregate reflected channels among nodes in the GKG scenario, as demonstrated in this study. We will exploit various optimization methods like successive convex approximation (SCA) and semidefinite relaxation with Gaussian randomization (SDR-GR) to address the raised optimization problems. Unlike most of the studies in the literature, our scheme can achieve a high GKG rate in static environments as well. Finally, we will examine the performance of the proposed method by normalized mean squared error (NMSE), key error rate (KER), key generation rate (KGR) and key randomness metrics. Our numerical results verify that for the equal available power budget, the ARIS significantly outperforms PRIS in NMSE and KER, achieving more than four times higher KGR.

eess.SP↗

arXiv2025

Joint Beamforming Design for Integrated Sensing and Communication Systems with Hybrid-Colluding Eavesdroppers

In this paper, we consider the physical layer security (PLS) problem for integrated sensing and communication (ISAC) systems in the presence of hybrid-colluding eavesdroppers, where an active eavesdropper (AE) and a passive eavesdropper (PE) collude to intercept the confidential information. To ensure the accuracy of sensing while preventing the eavesdropping, a base station transmits a signal consisting of information symbols and sensing waveform, in which the sensing waveform can be also used as artificial noise to interfere with eavesdroppers. Under this setup, we propose an alternating optimization-based two stage scheme (AO-TSS) for improving the sensing and communication performance. In the first stage, based on the assumptions that the perfect channel state information (CSI) of the AE and statistical CSI of the PE are known, the communication and sensing beamforming problem is formulated with the objective of minimizing the weighted sum of the beampattern matching mean squared error (MSE) and cross-correlation, subject to the secure transmission constraint. To tackle the non-convexity, we propose a semi-definite relaxation (SDR) algorithm and a reduced-complexity zero-forcing (ZF) algorithm. Then, the scenarios are further extended to more general cases with imperfect AE CSI and unknown PE CSI. To further improve the communication performance, the second-stage problem is developed to optimize the secrecy rate threshold under the radar performance constraint. Finally, numerical results demonstrate the superiority of the proposed scheme in terms of sensing and secure communication.

eess.SY↗

arXiv2024

Coding-Enhanced Cooperative Jamming for Secret Communication in Fluid Antenna Systems

This letter investigates the secret communication problem for a fluid antenna system (FAS)-assisted wiretap channel, where the legitimate transmitter transmits an information-bearing signal to the legitimate receiver, and at the same time, transmits a jamming signal to interfere with the eavesdropper (Eve). Unlike the conventional jamming scheme, which usually transmits Gaussian noise that interferes not only with Eve but also with the legitimate receiver, in this letter, we consider that encoded codewords are transmitted to jam Eve. Then, by employing appropriate coding schemes, the legitimate receiver can successfully decode the jamming signal and then cancel the interference, while Eve cannot, even if it knows the codebooks. We aim to maximize the secrecy rate through port selection and power control. Although the problem is non-convex, we show that the optimal solution can be found. Simulation results show that by using the FAS technique and the proposed jamming scheme, the secrecy rate of the system can be significantly increased.

cs.IT↗

arXiv2023

Two-Factor Authentication Approach Based on Behavior Patterns for Defeating Puppet Attacks

Fingerprint traits are widely recognized for their unique qualities and security benefits. Despite their extensive use, fingerprint features can be vulnerable to puppet attacks, where attackers manipulate a reluctant but genuine user into completing the authentication process. Defending against such attacks is challenging due to the coexistence of a legitimate identity and an illegitimate intent. In this paper, we propose PUPGUARD, a solution designed to guard against puppet attacks. This method is based on user behavioral patterns, specifically, the user needs to press the capture device twice successively with different fingers during the authentication process. PUPGUARD leverages both the image features of fingerprints and the timing characteristics of the pressing intervals to establish two-factor authentication. More specifically, after extracting image features and timing characteristics, and performing feature selection on the image features, PUPGUARD fuses these two features into a one-dimensional feature vector, and feeds it into a one-class classifier to obtain the classification result. This two-factor authentication method emphasizes dynamic behavioral patterns during the authentication process, thereby enhancing security against puppet attacks. To assess PUPGUARD's effectiveness, we conducted experiments on datasets collected from 31 subjects, including image features and timing characteristics. Our experimental results demonstrate that PUPGUARD achieves an impressive accuracy rate of 97.87% and a remarkably low false positive rate (FPR) of 1.89%. Furthermore, we conducted comparative experiments to validate the superiority of combining image features and timing characteristics within PUPGUARD for enhancing resistance against puppet attacks.

cs.CV↗

arXiv2023

Reconfigurable Intelligent Surface-aided Secret Key Generation in Multi-Cell Systems

Physical-layer key generation (PKG) exploits the reciprocity and randomness of wireless channels to generate a symmetric key between two legitimate communication ends. However, in multi-cell systems, PKG suffers from severe pilot contamination due to the reuse of pilots in different cells. In this paper, we invoke multiple reconfigurable intelligent surfaces (RISs) for adaptively shaping the environment and enhancing the PKG performance. To this end, we formulate an optimization problem to maximize the weighted sum key rate (WSKR) by jointly optimizing the precoding matrices at the base stations (BSs) and the phase shifts at the RISs. For addressing the non-convexity of the problem, we derive an upper bound of the WSKR and prove its tightness. To tackle the upper bound maximization problem, we apply an alternating optimization (AO)-based algorithm to divide the joint optimization into two sub-problems. We apply the Lagrangian dual approach based on the Karush-Kuhn-Tucker (KKT) conditions for the sub-problem of precoding matrices and adopt a projected gradient ascent (PGA) algorithm for the sub-problem of phase shifts. Simulation results confirm the near-optimal performance of the proposed algorithm and the effectiveness of RISs for improving the WSKR via mitigating pilot contamination.

cs.IT↗

arXiv2023

RIS-Jamming: Breaking Key Consistency in Channel Reciprocity-based Key Generation

Channel Reciprocity-based Key Generation (CRKG) exploits reciprocal channel randomness to establish shared secret keys between wireless terminals. This new security technique is expected to complement existing cryptographic techniques for secret key distribution of future wireless networks. In this paper, we present a new attack, reconfigurable intelligent surface (RIS) jamming, and show that an attacker can prevent legitimate users from agreeing on the same key by deploying a malicious RIS to break channel reciprocity. Specifically, we elaborate on three examples to implement the RIS jamming attack: Using active nonreciprocal circuits, performing time-varying controls, and reducing the signal-to-noise ratio. The attack effect is then studied by formulating the secret key rate with a relationship to the deployment of RIS. To resist such RIS jamming attacks, we propose a countermeasure that exploits wideband signals for multipath separation. The malicious RIS path is distinguished from all separated channel paths, and thus the countermeasure is referred to as contaminated path removal-based CRKG(CRP-CRKG). We present simulation results, showing that legitimate users under RIS jamming are still able to generate secret keys from the remaining paths. We also experimentally demonstrate the RIS jamming attack by using commodity Wi-Fi devices in conjunction with a fabricated RIS prototype. In our experiments, we were able to increase the average bit disagreement ratio (BDR) of raw secret keys by 20%. Further, we successfully demonstrate the proposed CRP-CRKG countermeasure to tackle RIS jamming in wideband systems as long as the source of randomness and the RIS propagation paths are separable.

cs.IT↗

arXiv2023

Information-Theoretic Secure Key Sharing for Wide-Area Mobile Applications

With the rapid growth of handheld devices in the internet of things (IoT) networks, mobile applications have become ubiquitous in everyday life. As technology is developed, so do also the risks and threats associated with it, especially in the forthcoming quantum era. Existing IoT networks, however, lack a quantum-resistant secret key sharing scheme to meet confidential message transmission demands in wide-area mobile applications. To address this issue, this article proposes a new scheme, channel reciprocity (CR) based quantum key distribution (QKD) CR-QKD, which accomplishes the goal of secret key sharing by combining emerging techniques of QKD and CR-based key generation (CRKG). Exploiting laws of quantum physics and properties of wireless channels, the proposed scheme is able to ensure the secrecy of the key, even against computationally unbounded adversaries. The basic mechanism is elaborated for a single-user case and it is extended into a multi-user case by redesigning a multi-user edge forwarding strategy. In addition, to make CR-QKD more practical, some enhancement strategies are studied to reduce the time delay and to improve the secret key generation rate in a secure manner. A prototype of CR-QKD is demonstrated in a metropolitan area network, where secret keys are shared between two remote IoT devices that are roughly fifteen kilometers apart from each other. The experimental results have verified that CR-QKD allows a secret key rate of 424 bits per second with a retransmission rate of 2.1%.

cs.IT↗

arXiv2022

Enabling Deep Learning-based Physical-layer Secret Key Generation for FDD-OFDM Systems in Multi-Environments

Deep learning-based physical-layer secret key generation (PKG) has been used to overcome the imperfect uplink/downlink channel reciprocity in frequency division duplexing (FDD) orthogonal frequency division multiplexing (OFDM) systems. However, existing efforts have focused on key generation for users in a specific environment where the training samples and test samples follow the same distribution, which is unrealistic for real-world applications. This paper formulates the PKG problem in multiple environments as a learning-based problem by learning the knowledge such as data and models from known environments to generate keys quickly and efficiently in multiple new environments. Specifically, we propose deep transfer learning (DTL) and meta-learning-based channel feature mapping algorithms for key generation. The two algorithms use different training methods to pre-train the model in the known environments, and then quickly adapt and deploy the model to new environments. Simulation and experimental results show that compared with the methods without adaptation, the DTL and meta-learning algorithms both can improve the performance of generated keys. In addition, the complexity analysis shows that the meta-learning algorithm can achieve better performance than the DTL algorithm with less cost.

cs.IT↗

arXiv2022

Reconfigurable Intelligent Surface-Assisted Secret Key Generation in Spatially Correlated Channels

Reconfigurable intelligent surface (RIS) is a disruptive technology to enhance the performance of physical-layer key generation (PKG) thanks to its ability to smartly customize the radio environments. Existing RIS-assisted PKG methods are mainly based on the idealistic assumption of an independent and identically distributed (i.i.d.) channel model at both the base station (BS) and the RIS. However, the i.i.d. model is inaccurate for a typical RIS in an isotropic scattering environment and neglecting the existence of channel spatial correlation would possibly degrade the PKG performance. In this paper, we establish a general spatially correlated channel model and propose a new channel probing framework based on the transmit and the reflective beamforming. We derive a closed-form key generation rate (KGR) expression and formulate an optimization problem, which is solved by using the low-complexity Block Successive Upper-bound Minimization (BSUM) with Mirror-Prox method. Simulation results show that compared to the existing methods based on the i.i.d. fading model, our proposed method achieves about $5$ dB transmit power gain when the spacing between two neighboring RIS elements is a quarter of the wavelength. Also, the KGR increases significantly with the number of RIS elements while that increases marginally with the number of BS antennas.

cs.IT↗

arXiv2022

Joint Transmit and Reflective Beamforming for RIS-assisted Secret Key Generation

Reconfigurable intelligent surface (RIS) is a promising technique to enhance the performance of physical-layer key generation (PKG) due to its ability to smartly customize the radio environments. Existing RIS-assisted PKG methods are mainly based on the idealistic assumption of an independent and identically distributed (i.i.d.) channel model at both the transmitter and the RIS. However, the i.i.d. model is inaccurate for a typical RIS in an isotropic scattering environment. Also, neglecting the existence of channel spatial correlation would degrade the PKG performance. In this paper, we establish a general spatially correlated channel model in multi-antenna systems and propose a new PKG framework based on the transmit and the reflective beamforming at the base station (BS) and the RIS. Specifically, we derive a closed-form expression for characterizing the key generation rate (KGR) and obtain a globally optimal solution of the beamformers to maximize the KGR. Furthermore, we analyze the KGR performance difference between the one adopting the assumption of the i.i.d. model and that of the spatially correlated model. It is found that the beamforming designed for the correlated model outperforms that for the i.i.d. model while the KGR gain increases with the channel correlation. Simulation results show that compared to existing methods based on the i.i.d. fading model, our proposed method achieves about $5$ dB performance gain when the BS antenna correlation $ρ$ is $0.3$ and the RIS element spacing is half of the wavelength.

cs.IT↗

arXiv2022

Reconfigurable Intelligent Surface for Physical Layer Key Generation: Constructive or Destructive?

Physical layer key generation (PKG) is a promising means to provide on-the-fly shared secret keys by exploiting the intrinsic randomness of the radio channel. However, the performance of PKG is highly dependent on the propagation environments. Due to its feature of controlling the wireless environment, reconfigurable intelligent surface~(RIS) is appealing to be applied in PKG. In this paper, in contrast to the existing literature, we investigate both the constructive and destructive effects of RIS on the PKG scheme. For the constructive aspect, we have identified static and wave-blockage environments as two RIS-empowered-PKG applications in future wireless systems. In particular, our experimental results in a static environment showed that RIS can enhance the entropy of the secret key, achieving a key generation rate (KGR) of 97.39 bit/s with a bit disagreement rate (BDR) of 0.083. In multi-user systems where some remote users are in worse channel conditions, the proposed RIS-assisted PKG algorithm improves the sum secret key rate by more than 2 dB, compared to the literature. Furthermore, we point out that RIS could be utilized by an attacker to perform new jamming and leakage attacks and give countermeasures, respectively. Finally, we outline future research directions for PKG systems in light of the RIS.

cs.IT↗

arXiv2021

Fast and Secure Key Generation with Channel Obfuscation in Slowly Varying Environments

The physical-layer secret key generation has emerged as a promising solution for establishing cryptographic keys by leveraging reciprocal and time-varying wireless channels. However, existing approaches suffer from low key generation rates and vulnerabilities under various attacks in slowly varying environments. We propose a new physical-layer secret key generation approach with channel obfuscation, which improves the dynamic property of channel parameters based on random filtering and random antenna scheduling. Our approach makes one party obfuscate the channel to allow the legitimate party to obtain similar dynamic channel parameters yet prevents a third party from inferring the obfuscation information. Our approach allows more random bits to be extracted from the obfuscated channel parameters by a joint design of the K-L transform and adaptive quantization. A testbed implementation shows that our approach, compared to the existing ones that we evaluate, performs the best in generating high entropy bits at a fast rate and a high-security level in slowly varying environments. Specifically, our approach can achieve a significantly faster secret bit generation rate at about $67$ bit/pkt, and the key sequences can pass the randomness tests of the NIST test suite.

cs.CR↗

arXiv2021

Deep Learning-based Physical-Layer Secret Key Generation for FDD Systems

Physical-layer key generation (PKG) establishes cryptographic keys from highly correlated measurements of wireless channels, which relies on reciprocal channel characteristics between uplink and downlink, is a promising wireless security technique for Internet of Things (IoT). However, it is challenging to extract common features in frequency division duplexing (FDD) systems as uplink and downlink transmissions operate at different frequency bands whose channel frequency responses are not reciprocal any more. Existing PKG methods for FDD systems have many limitations, i.e., high overhead and security problems. This paper proposes a novel PKG scheme that uses the feature mapping function between different frequency bands obtained by deep learning to make two users generate highly similar channel features in FDD systems. In particular, this is the first time to apply deep learning for PKG in FDD systems. We first prove the existence of the band feature mapping function for a given environment and a feedforward network with a single hidden layer can approximate the mapping function. Then a Key Generation neural Network (KGNet) is proposed for reciprocal channel feature construction, and a key generation scheme based on the KGNet is also proposed. Numerical results verify the excellent performance of the KGNet-based key generation scheme in terms of randomness, key generation ratio, and key error rate. Besides, the overhead analysis shows that the method proposed in this paper can be used for resource-contrained IoT devices in FDD systems.

cs.CR↗