arXiv subjects

H. Albrecht

Publications and source records attributed to H. Albrecht.

4 recordsLinked to original sources

arXiv2007

The Outer Tracker Detector of the HERA-B Experiment. Part III: Operation and Performance

In this paper we describe the operation and performance of the HERA-B Outer Tracker, a 112674 channel system of planar drift tube layers. The performance of the HERA-B Outer Tracker system fullfilled all requirements for stable and efficient operation in a hadronic environment, thus confirming the adequacy of the honeycomb drift tube technology and of the front-end readout system. The detector was stably operated with a gas gain of 30000 in an Ar/CF4/CO2 (65:30:5) gas mixture, yielding a good efficiency for triggering and track reconstruction, larger than 95 % for tracks with momenta above 5 GeV/c. The hit resolution of the drift cells was 300 to 320 micrometers and the relative momentum resolution can be described as: sigma(p)/p (in %) = (1.61 +- 0.02) + (0.0051 +- 0.0006) p. At the end of the HERA-B running no aging effects in the Outer Tracker cells were observed.

physics.ins-det↗

arXiv2005

The Outer Tracker Detector of the HERA-B Experiment Part I: Detector

The HERA-B Outer Tracker is a large system of planar drift chambers with about 113000 read-out channels. Its inner part has been designed to be exposed to a particle flux of up to 2.10^5 cm^-2 s^-1, thus coping with conditions similar to those expected for future hadron collider experiments. 13 superlayers, each consisting of two individual chambers, have been assembled and installed in the experiment. The stereo layers inside each chamber are composed of honeycomb drift tube modules with 5 and 10 mm diameter cells. Chamber aging is prevented by coating the cathode foils with thin layers of copper and gold, together with a proper drift gas choice. Longitudinal wire segmentation is used to limit the occupancy in the most irradiated detector regions to about 20 %. The production of 978 modules was distributed among six different laboratories and took 15 months. For all materials in the fiducial region of the detector good compromises of stability versus thickness were found. A closed-loop gas system supplies the Ar/CF4/CO2 gas mixture to all chambers. The successful operation of the HERA-B Outer Tracker shows that a large tracker can be efficiently built and safely operated under huge radiation load at a hadron collider.

physics.ins-det↗

arXiv2003

Aging Studies for the Large Honeycomb Drift Tube System of the Outer Tracker of HERA-B

The HERA-B Outer Tracker consists of drift tubes folded from polycarbonate foil and is operated with Ar/CF4/CO2 as drift gas. The detector has to stand radiation levels which are similar to LHC conditions. The first prototypes exposed to radiation in HERA-B suffered severe radiation damage due to the development of self-sustaining currents (Malter effect). In a subsequent extended R&D program major changes to the original concept for the drift tubes (surface conductivity, drift gas, production materials) have been developed and validated for use in harsh radiation environments. In the test program various aging effects (like Malter currents, gain loss due to anode aging and etching of the anode gold surface) have been observed and cures by tuning of operation parameters have been developed.

hep-ex↗

arXiv2000

A Search for the Electric Dipole Moment of the Tau-Lepton

Using the ARGUS detector at the e+e- storage ring DORIS II, we have searched for the real and imaginary part of the electric dipole formfactor d_tau of the tau lepton in the production of tau pairs at q^2=100 GeV^2. This is the first direct measurement of this CP violating formfactor. We applied the method of optimised observables which takes into account all available information on the observed tau decay products. No evidence for CP violation was found, and we derive the following results: Re(d_tau)=(1.6+-.9)*10^(-16) ecm and Im(d_tau)=(-0.2+-0.8)*10^(-16) ecm, where statistical and systematic errors have been combined.

hep-ex↗