arXiv subjects

H. Harry Asada

Publications and source records attributed to H. Harry Asada.

At least 19 recordsLinked to original sources

arXiv2025

Mechanically Programming the Cross-Sectional Shape of Soft Growing Robotic Structures for Patient Transfer

Pneumatic soft everting robotic structures have the potential to facilitate human transfer tasks due to their ability to grow underneath humans without sliding friction and their utility as a flexible sling when deflated. Tubular structures naturally yield circular cross-sections when inflated, whereas a robotic sling must be both thin enough to grow between them and their resting surface and wide enough to cradle the human. Recent works have achieved flattened cross-sections by including rigid components into the structure, but this reduces conformability to the human. We present a method of mechanically programming the cross-section of soft everting robotic structures using flexible strips that constrain radial expansion between points along the outer membrane. Our method enables simultaneously wide and thin profiles while maintaining the full multi-axis flexibility of traditional slings. We develop and validate a model relating the geometric design specifications to the fabrication parameters, and experimentally characterize their effects on growth rate. Finally, we prototype a soft growing robotic sling system and demonstrate its use for assisting a single caregiver in bed-to-chair patient transfer.

cs.RO↗

arXiv2025

Koopman global linearization of contact dynamics for robot locomotion and manipulation enables elaborate control

Controlling robots that dynamically engage in contact with their environment is a pressing challenge. Whether a legged robot making-and-breaking contact with a floor, or a manipulator grasping objects, contact is everywhere. Unfortunately, the switching of dynamics at contact boundaries makes control difficult. Predictive controllers face non-convex optimization problems when contact is involved. Here, we overcome this difficulty by applying Koopman operators to subsume the segmented dynamics due to contact changes into a unified, globally-linear model in an embedding space. We show that viscoelastic contact at robot-environment interactions underpins the use of Koopman operators without approximation to control inputs. This methodology enables the convex Model Predictive Control of a legged robot, and the real-time control of a manipulator engaged in dynamic pushing. In this work, we show that our method allows robots to discover elaborate control strategies in real-time over time horizons with multiple contact changes, and the method is applicable to broad fields beyond robotics.

cs.RO↗

arXiv2025

Loop closure grasping: Topological transformations enable strong, gentle, and versatile grasps

Grasping mechanisms must both create and subsequently hold grasps that permit safe and effective object manipulation. Existing mechanisms address the different functional requirements of grasp creation and grasp holding using a single morphology, but have yet to achieve the simultaneous strength, gentleness, and versatility needed for many applications. We present "loop closure grasping", a class of robotic grasping that addresses these different functional requirements through topological transformations between open-loop and closed-loop morphologies. We formalize these morphologies for grasping, formulate the loop closure grasping method, and present principles and a design architecture that we implement using soft growing inflated beams, winches, and clamps. The mechanisms' initial open-loop topology enables versatile grasp creation via unencumbered tip movement, and closing the loop enables strong and gentle holding with effectively infinite bending compliance. Loop closure grasping circumvents the tradeoffs of single-morphology designs, enabling grasps involving historically challenging objects, environments, and configurations.

cs.RO↗

arXiv2024

Control-Coherent Koopman Modeling: A Physical Modeling Approach

The modeling of nonlinear dynamics based on Koopman operator theory, which is originally applicable only to autonomous systems with no control, is extended to non-autonomous control system without approximation to input matrix B. Prevailing methods using a least square estimate of the B matrix may result in an erroneous input matrix, misinforming the controller about the structure of the input matrix in a lifted space. Here, a new method for constructing a Koopman model that comprises the exact input matrix B is presented. A set of state variables are introduced so that the control inputs are linearly involved in the dynamics of actuators. With these variables, a lifted linear model with the exact control matrix, called a Control-Coherent Koopman Model, is constructed by superposing control input terms, which are linear in local actuator dynamics, to the Koopman operator of the associated autonomous nonlinear system. The proposed method is applied to multi degree-of-freedom robotic arms and multi-cable manipulation systems. Model Predictive Control is applied to the former. It is demonstrated that the prevailing Dynamic Mode Decomposition with Control (DMDc) using an approximate control matrix B does not provide a satisfactory result, while the Control-Coherent Koopman Model performs well with the correct B matrix.

eess.SY↗

arXiv2024

A two-speed actuator for robotics with fast seamless gear shifting

This paper present a novel dual-speed actuator adapted to robotics. In many applications, robots have to bear large loads while moving slowly and also have to move quickly through the air with almost no load. This lead to conflicting requirements for their actuators. Multiple gear ratios address this issue by allowing an effective use of power over a wide range of torque-speed load conditions. Furthermore, very different gear ratios also lead to drastic changes of the intrinsic impedance, enabling a non-back-drivable mode for stiff position control and a back-drivable mode for force control. The proposed actuator consists of two electric motors coupled to a differential; one has a large gear ratio while the other is almost direct-drive and equipped with a brake. During the high-force mode the brake is locked, only one motor is used, and the actuator behaves like a regular highly-geared servo-motor. During the high-speed mode the brake is open, both motor are used at the same time, and the actuator behaves like a direct drive motor. A dynamic model is developed and novel controllers are proposed for synergic use of both motors. The redundancy of motors is exploited for maintaining full control of the output during mode transitions, allowing for fast and seamless switching even when interacting with unknown environments. Results are demonstrated with a proof-of-concept linear actuator.

cs.RO↗

arXiv2024

Leveraging Natural Load Dynamics with Variable Gear-ratio Actuators

This paper presents a robotic system where the gear-ratio of an actuator is dynamically changed to either leverage or attenuate the natural load dynamics. Based on this principle, lightweight robotic systems can be made fast and strong; exploiting the natural load dynamics for moving at higher speeds (small reduction ratio), while also able to bear a large load through the attenuation of the load dynamics (large reduction ratio). A model-based control algorithm to automatically select the optimal gear-ratios that minimize the total actuator torques for an arbitrary dynamic state and expected uncertainty level is proposed. Also, a novel 3-DoF robot arm using custom actuators with two discrete gear-ratios is presented. The advantages of gear-shifting dynamically are demonstrated through experiments and simulations. Results show that actively changing the gear-ratio using the proposed control algorithms can lead to an order-of-magnitude reduction of necessary actuator torque and power, and also increase robustness to disturbances.

cs.RO↗

arXiv2023

Language-Grounded Control for Coordinated Robot Motion and Speech

Recent advancements have enabled human-robot collaboration through physical assistance and verbal guidance. However, limitations persist in coordinating robots' physical motions and speech in response to real-time changes in human behavior during collaborative contact tasks. We first derive principles from analyzing physical therapists' movements and speech during patient exercises. These principles are translated into control objectives to: 1) guide users through trajectories, 2) control motion and speech pace to align completion times with varying user cooperation, and 3) dynamically paraphrase speech along the trajectory. We then propose a Language Controller that synchronizes motion and speech, modulating both based on user cooperation. Experiments with 12 users show the Language Controller successfully aligns motion and speech compared to baselines. This provides a framework for fluent human-robot collaboration.

cs.RO↗

arXiv2023

Shared Control Based on Extended Lipschitz Analysis With Application to Human-Superlimb Collaboration

This paper presents a quantitative method to construct voluntary manual control and sensor-based reactive control in human-robot collaboration based on Lipschitz conditions. To collaborate with a human, the robot observes the human's motions and predicts a desired action. This predictor is constructed from data of human demonstrations observed through the robot's sensors. Analysis of demonstration data based on Lipschitz quotients evaluates a) whether the desired action is predictable and b) to what extent the action is predictable. If the quotients are low for all the input-output pairs of demonstration data, a predictor can be constructed with a smooth function. In dealing with human demonstration data, however, the Lipschitz quotients tend to be very high in some situations due to the discrepancy between the information that humans use and the one robots can obtain. This paper a) presents a method for seeking missing information or a new variable that can lower the Lipschitz quotients by adding the new variable to the input space, and b) constructs a human-robot shared control system based on the Lipschitz analysis. Those predictable situations are assigned to the robot's reactive control, while human voluntary control is assigned to those situations where the Lipschitz quotients are high even after the new variable is added. The latter situations are deemed unpredictable and are rendered to the human. This human-robot shared control method is applied to assist hemiplegic patients in a bimanual eating task with a Supernumerary Robotic Limb, which works in concert with an unaffected functional hand.

cs.RO↗

arXiv2023

A Data-Driven Approach to Positioning Grab Bars in the Sagittal Plane for Elderly Persons

The placement of grab bars for elderly users is based largely on ADA building codes and does not reflect the large differences in height, mobility, and muscle power between individual persons. The goal of this study is to see if there are any correlations between an elderly user's preferred handlebar pose and various demographic indicators, self-rated mobility for tasks requiring postural change, and biomechanical markers. For simplicity, we consider only the case where the handlebar is positioned directly in front of the user, as this confines the relevant body kinematics to a 2D sagittal plane. Previous eldercare devices have been constructed to position a handlebar in various poses in space. Our work augments these devices and adds to the body of knowledge by assessing how the handlebar should be positioned based on data on actual elderly people instead of simulations.

cs.RO↗

arXiv2023

An Avatar Robot Overlaid with the 3D Human Model of a Remote Operator

Although telepresence assistive robots have made significant progress, they still lack the sense of realism and physical presence of the remote operator. This results in a lack of trust and adoption of such robots. In this paper, we introduce an Avatar Robot System which is a mixed real/virtual robotic system that physically interacts with a person in proximity of the robot. The robot structure is overlaid with the 3D model of the remote caregiver and visualized through Augmented Reality (AR). In this way, the person receives haptic feedback as the robot touches him/her. We further present an Optimal Non-Iterative Alignment solver that solves for the optimally aligned pose of 3D Human model to the robot (shoulder to the wrist non-iteratively). The proposed alignment solver is stateless, achieves optimal alignment and faster than the baseline solvers (demonstrated in our evaluations). We also propose an evaluation framework that quantifies the alignment quality of the solvers through multifaceted metrics. We show that our solver can consistently produce poses with similar or superior alignments as IK-based baselines without their potential drawbacks.

cs.RO↗

arXiv2023

Learned Lifted Linearization Applied to Unstable Dynamic Systems Enabled by Koopman Direct Encoding

This paper presents a Koopman lifting linearization method that is applicable to nonlinear dynamical systems having both stable and unstable regions. It is known that DMD and other standard data-driven methods face a fundamental difficulty in constructing a Koopman model when applied to unstable systems. Here we solve the problem by incorporating knowledge about a nonlinear state equation with a learning method for finding an effective set of observables. In a lifted space, stable and unstable regions are separated into independent subspaces. Based on this property, we propose to find effective observables through neural net training where training data are separated into stable and unstable trajectories. The resultant learned observables are used for constructing a linear state transition matrix using method known as Direct Encoding, which transforms the nonlinear state equation to a state transition matrix through inner product computations with the observables. The proposed method shows a dramatic improvement over existing DMD and data-driven methods.

cs.LG↗

arXiv2022

A Fast Gear-Shifting Actuator for Robotic Tasks with Contacts

Vehicle power-trains use a variable transmission (multiple gear-ratios) to minimize motor size and maximize efficiency while meeting a wide-range of operating points. Robots could similarly benefit from variable transmission to save weight and improve energy efficiency; leading to potentially groundbreaking improvements for mobile and wearable robotic systems. However, variable transmissions in a robotic context leads to new challenges regarding the gear-shifting methodology: 1) order-of-magnitude variations of reduction ratios are desired, and 2) contact situations during manipulation/locomotion tasks lead to impulsive behavior at the moment when gear-shifting is required. This paper present an actuator with a gear-shifting methodology that can seamlessly change between two very different reduction ratios during dynamic contact situations. Experimental results demonstrate the ability to execute a gear-shift from a 1:23 reduction to a 1:474 reduction in less than 30ms during contact with a rigid object.

cs.RO↗

arXiv2022

A practical optimal control approach for two-speed actuators

This paper addresses the closed-loop control of an actuator with both a continuous input variable (motor torque) and a discrete input variable (mode selection). In many applications, robots have to bear large loads while moving slowly and also have to move quickly through the air with almost no load, leading to conflicting requirements for their actuators. An actuator with multiple gear ratios, like in a powertrain, can address this issue by allowing an effective use of power over a wide range of output speed. However, having discrete modes of operation adds complexity to the high-level control and planning. Here a controller for two-speed actuators that automatically select both the best gear ratio and the motor torque is developed. The approach is to: first derive a low-dimensional model, then use dynamic programming to find the best actions for all possible situations, and last use regression analysis to extract simplified global feedback laws. This approach produces simple practical nearly-optimal feedback laws. A controller that globally minimizes a quadratic cost function is derived for a two-speed actuator prototype, global stability is proven and performance is demonstrated experimentally.

cs.RO↗

arXiv2021

Monitoring the Mental State of Cooperativeness for Guiding an Elderly Person in Sit-to-Stand Assistance

In providing physical assistance to elderly people, ensuring cooperative behavior from the elderly persons is a critical requirement. In sit-to-stand assistance, for example, an older adult must lean forward, so that the body mass can shift towards the feet before a caregiver starts lifting the body. An experienced caregiver guides the older adult through verbal communications and physical interactions, so that the older adult may be cooperative throughout the process. This guidance is of paramount importance and is a major challenge in introducing a robotic aid to the eldercare environment. The wide-scope goal of the current work is to develop an intelligent eldercare robot that can a) monitor the mental state of an older adult, and b) guide the older adult through an assisting procedure so that he/she can be cooperative in being assisted. The current work presents a basic modeling framework for describing a human's physical behaviors reflecting an internal mental state, and an algorithm for estimating the mental state through interactive observations. The sit-to-stand assistance problem is considered for the initial study. A simple Kalman Filter is constructed for estimating the level of cooperativeness in response to applied cues, with a thresholding scheme being used to make judgments on the cooperativeness state.

cs.RO↗

arXiv2021

Mapping Human Muscle Force to Supernumerary Robotics Device for Overhead Task Assistance

Supernumerary Robotics Device (SRD) is an ideal solution to provide robotic assistance in overhead manual manipulation. Since two arms are occupied for the overhead task, it is desired to have additional arms to assist us in achieving other subtasks such as supporting the far end of a long plate and pushing it upward to fit in the ceiling. In this study, a method that maps human muscle force to SRD for overhead task assistance is proposed. Our methodology is to utilize redundant DoFs such as the idle muscles in the leg to control the supporting force of the SRD. A sEMG device is worn on the operator's shank where muscle signals are measured, parsed, and transmitted to SRD for control. In the control aspect, we adopted stiffness control in the task space based on torque control at the joint level. We are motivated by the fact that humans can achieve daily manipulation merely through simple inherent compliance property in joint driven by muscles. We explore to estimate the force of some particular muscles in humans and control the SRD to imitate the behaviors of muscle and output supporting forces to accomplish the subtasks such as overhead supporting. The sEMG signals detected from human muscles are extracted, filtered, rectified, and parsed to estimate the muscle force. We use this force information as the intent of the operator for proper overhead supporting force. As one of the well-known compliance control methods, stiffness control is easy to achieve using a few of straightforward parameters such as stiffness and equilibrium point. Through tuning the stiffness and equilibrium point, the supporting force of SRD in task space can be easily controlled. The muscle force estimated by sEMG is mapped to the desired force in the task space of the SRD. The desired force is transferred into stiffness or equilibrium point to output the corresponding supporting force.

cs.RO↗

arXiv2021

Physics-Based Causal Lifting Linearization of Nonlinear Control Systems Underpinned by the Koopman Operator

Methods for constructing causal linear models from nonlinear dynamical systems through lifting linearization underpinned by Koopman operator and physical system modeling theory are presented. Outputs of a nonlinear control system, called observables, may be functions of state and input, $ϕ(x,u)$. These input-dependent observables cannot be used for lifting the system because the state equations in the augmented space contain the time derivatives of input and are therefore anticausal. Here, the mechanism of creating anticausal observables is examined, and two methods for solving the causality problem in lifting linearization are presented. The first method is to replace anticausal observables by their integral variables $ϕ^*$, and lift the dynamics with $ϕ^*$, so that the time derivative of $ϕ^*$ does not include the time derivative of input. The other method is to alter the original physical model by adding a small inertial element, or a small capacitive element, so that the system's causal relationship changes. These augmented dynamics alter the signal path from the input to the anticausal observable so that the observables are not dependent on inputs. Numerical simulations validate the effectiveness of the methods.

eess.SY↗

arXiv2021

Learning of Causal Observable Functions for Koopman-DFL Lifting Linearization of Nonlinear Controlled Systems and Its Application to Excavation Automation

Effective and causal observable functions for low-order lifting linearization of nonlinear controlled systems are learned from data by using neural networks. While Koopman operator theory allows us to represent a nonlinear system as a linear system in an infinite-dimensional space of observables, exact linearization is guaranteed only for autonomous systems with no input, and finding effective observable functions for approximation with a low-order linear system remains an open question. Dual-Faceted Linearization uses a set of effective observables for low-order lifting linearization, but the method requires knowledge of the physical structure of the nonlinear system. Here, a data-driven method is presented for generating a set of nonlinear observable functions that can accurately approximate a nonlinear control system to a low-order linear control system. A caveat in using data of measured variables as observables is that the measured variables may contain input to the system, which incurs a causality contradiction when lifting the system, i.e. taking derivatives of the observables. The current work presents a method for eliminating such anti-causal components of the observables and lifting the system using only causal observables. The method is applied to excavation automation, a complex nonlinear dynamical system, to obtain a low-order lifted linear model for control design.

cs.RO↗

arXiv2021

Dynamic Modeling of Bucket-Soil Interactions Using Koopman-DFL Lifting Linearization for Model Predictive Contouring Control of Autonomous Excavators

A lifting-linearization method based on the Koopman operator and Dual Faceted Linearization is applied to the control of a robotic excavator. In excavation, a bucket interacts with the surrounding soil in a highly nonlinear and complex manner. Here, we propose to represent the nonlinear bucket-soil dynamics with a set of linear state equations in a higher-dimensional space. The space of independent state variables is augmented by adding variables associated with nonlinear elements involved in the bucket-soil dynamics. These include nonlinear resistive forces and moment acting on the bucket from the soil, and the effective inertia of the bucket that varies as the soil is captured into the bucket. Variables associated with these nonlinear resistive and inertia elements are treated as additional state variables, and their time evolution is represented as another set of linear differential equations. The lifted linear dynamic model is then applied to Model Predictive Contouring Control, where a cost functional is minimized as a convex optimization problem thanks to the linear dynamics in the lifted space. The lifted linear model is tuned based on a data-driven method by using a soil dynamics simulator. Simulation experiments verify the effectiveness of the proposed lifting linearization compared to its counterpart.

cs.RO↗