SearcharxivSearch

arXiv subjects

H. Herrmann

Publications and source records attributed to H. Herrmann.

17 recordsLinked to original sources

Experiments conducted in the burning plasma regime with inertial fusion implosions

An experimental program is currently underway at the National Ignition Facility (NIF) to compress deuterium and tritium (DT) fuel to densities and temperatures sufficient to achieve fusion and energy gain. The primary approach being investigated is indirect drive inertial confinement fusion (ICF), where a high-Z radiation cavity (a hohlraum) is heated by lasers, converting the incident energy into x-ray radiation which in turn drives the DT fuel filled capsule causing it to implode. Previous experiments reported DT fuel gain exceeding unity [O.A. Hurricane et al., Nature 506, 343 (2014)] and then exceeding the kinetic energy of the imploding fuel [S. Le Pape et al., Phys. Rev. Lett. 120, 245003 (2018)]. We report on recent experiments that have achieved record fusion neutron yields on NIF, greater than 100 kJ with momentary fusion powers exceeding 1PW, and have for the first time entered the burning plasma regime where fusion alpha-heating of the fuel exceeds the energy delivered to the fuel via compression. This was accomplished by increasing the size of the high-density carbon (HDC) capsule, increasing energy coupling, while controlling symmetry and implosion design parameters. Two tactics were successful in controlling the radiation flux symmetry and therefore the implosion symmetry: transferring energy between laser cones via plasma waves, and changing the shape of the hohlraum. In conducting these experiments, we controlled for known sources of degradation. Herein we show how these experiments were performed to produce record performance, and demonstrate the data fidelity leading us to conclude that these shots have entered the burning plasma regime.

physics.plasm-ph

Quantum optical coherence: From linear to nonlinear interferometers

Interferometers provide a highly sensitive means to investigate and exploit the coherence properties of light in metrology applications. However, interferometers come in various forms and exploit different properties of the optical states within. In this paper, we introduce a classification scheme that characterizes any interferometer based on the number of involved nonlinear elements by studying their influence on single-photon and photon-pair states. Several examples of specific interferometers from these more general classes are discussed, and the theory describing the expected first-order and second-order coherence measurements for single-photon and single-photon-pair input states is summarized and compared. These theoretical predictions are then tested in an innovative experimental setup that is easily able to switch between implementing an interferometer consisting of only one or two nonlinear elements. The resulting singles and coincidence rates are measured in both configurations and the results are seen to fit well with the presented theory. The measured results of coherence are tied back to the presented classification scheme, revealing that our experimental design can be useful in gaining insight into the properties of the various interferometeric setups containing different degrees of nonlinearity.

quant-ph

Improving SPDC single-photon sources via extended heralding and feed-forward control

Evolving photonic quantum technologies and applications require higher and higher rates of single photon generation. In parallel, it is required that these generated photons are kept spectrally pure for multi-photon experiments and that multi-photon noise be kept to a minimum. In spontaneous parametric down-conversion sources, these requirements are conflicting, because spectral filtering to increase spectral purity always means lowering the rate at which photons are generated, and increasing the pump power means increasing the multi-photon noise. In this paper, we present a scheme, called extended heralding, which aims to mitigate the reduction of single-photon generation rate under spectral filtering by removing cases where we detect light in the rejection band of the heralding photon's filter. Our experiment shows that this allows for higher single-photon generation rates with lower multi-photon noise than the standard approach of neglecting modes falling out of the filter bandwidth. We also show that by using active feed-forward control based on this extended heralding, it is possible to further improve the performance of the original source by physically eliminating uncorrelated photons from the output stream.

quant-ph

A consistent view of the samarium hexaboride terminations to resolve the nature of its surface states

The research effort prompted by the prediction that SmB$_6$ could be the first topological Kondo insulator has produced a wealth of new results, though not all of these seem compatible. A major discrepancy exists between scanning tunneling microscopy / spectroscopy (STM/S) and angle-resolved photoemission spectroscopy (ARPES), because the two experimental methods suggest a very different number of terminations of the (100) surface with different properties. Here we tackle this issue in a combined STM/S and ARPES study. We find that two of the well-ordered topographies reported in earlier STM studies can be associated with the crystal terminations identified using photoemission. We further observe a reversal of the STM contrast with bias voltage for one of the topographies. We ascribe this result to a different energy dependence of Sm and B-derived states, and show that it can be used to obtain element specific images of SmB$_6$ and identify which topography belongs to which termination. We finally find STS results to support a modification of the low-energy electronic structure at the surface that has been proposed as the trivial origin of surface metallicity in this material.

cond-mat.str-el

Modified Two-Photon Interference Achieved by the Manipulation of Entanglement

In this theoretical study we demonstrate that entangled states are able to significantly extend the functionality of Hong-Ou-Mandel (HOM) interferometers. By generating a coherent superposition of parametric-down-conversion photons and spatial entanglement in the input channel, the coincidence probability measured at the output changes from a typical HOM-type dip (photon bunching) into much richer patterns including an anti-bunching peak and rapid oscillation fringes with twice the optical frequency. The considered system should be realizable on a single chip using current waveguide technology in the $LiNbO_3$ platform.

quant-ph

Toolbox for the design of $LiNbO_3$-based passive and active integrated quantum circuits

We present and discuss perspectives of current developments on advanced quantum optical circuits monolithically integrated in the lithium niobate platform. A set of basic components comprising photon pair sources based on parametric down conversion (PDC), passive routing elements and active electro-optically controllable switches and polarisation converters are building blocks of a toolbox which is the basis for a broad range of diverse quantum circuits. We review the state-of-the-art of these components and provide models that properly describe their performance in quantum circuits. As an example for applications of these models we discuss design issues for a circuit providing on-chip two-photon interference. The circuit comprises a PDC section for photon pair generation followed by an actively controllable modified Mach-Zehnder structure for observing Hong-Ou-Mandel (HOM) interference. The performance of such a chip is simulated theoretically by taking even imperfections of the properties of the individual components into account.

quant-ph

A high-power waveguide resonator second harmonic device with external conversion efficiency up to 75%

We report on a highly efficient waveguide resonator device for the production of 775 nm light using a titanium indiffused LiNbO3waveguide resonator. When scanning the resonance the device produces up to 110 mW of second harmonic power with 140 mW incident on the device - an external conversion efficiency of 75 %. The cavity length is also locked, using a Pound-Drever-Hall type locking scheme, involving feedback to either the cavity temperature or the laser frequency. With laser frequency feedback a stable output power of approximately 28 mW from a 52 mW pump is seen over one hour.

physics.ins-det

A waveguide cavity resonator source of squeezing

We present the generation of continuous-wave optical squeezing from a titanium-indiffused lithium niobate waveguide resonator. We directly measure 2.9\pm 0.1 dB of single-mode squeezing, which equates to a produced level of 4.9\pm 0.1 dB after accounting for detection losses. This device showcases the current capabilities of this waveguide architecture and precipitates more complicated integrated continuous-wave quantum devices in the continuous-variable regime.

quant-ph

High-quality polarization entanglement state preparation and manipulation in standard telecommunication channels

We report a novel and simple approach for generating near-perfect quality polarization entanglement in a fully guided-wave fashion. Both deterministic pair separation into two adjacent telecommunication channels and the paired photons' temporal walk-off compensation are achieved using standard fiber components. Two-photon interference experiments are performed, both for quantitatively demonstrating the relevance of our approach, and for manipulating the produced state between bosonic and fermionic symmetries. The compactness, versatility, and reliability of this configuration makes it a potential candidate for quantum communication applications.

quant-ph

Polarization entangled photon-pair source based on a type-II PPLN waveguide emitting at a telecom wavelength

We report the realization of a fiber coupled polarization entangled photon-pair source at 1310 nm based on a birefringent titanium in-diffused waveguide integrated on periodically poled lithium niobate. By taking advantage of a dedicated and high-performance setup, we characterized the quantum properties of the pairs by measuring two-photon interference in both Hong-Ou-Mandel and standard Bell inequality configurations. We obtained, for the two sets of measurements, interference net visibilities reaching nearly 100%, which represent important and competitive results compared to similar waveguide-based configurations already reported. These results prove the relevance of our approach as an enabling technology for long-distance quantum communication.

quant-ph

Purification of Single-photon Entanglement

Single-photon entanglement is a simple form of entanglement that exists between two spatial modes sharing a single photon. Despite its elementary form, it provides a resource as useful as polarization-entangled photons and it can be used for quantum teleportation and entanglement swapping operations. Here, we report the first experiment where single-photon entanglement is purified with a simple linear-optics based protocol. Besides its conceptual interest, this result might find applications in long distance quantum communication based on quantum repeaters.

quant-ph

Integrated optical source of polarization entangled photons at 1310 nm

We report the realization of a new polarization entangled photon-pair source based on a titanium-indiffused waveguide integrated on periodically poled lithium niobate pumped by a CW laser at $655 nm$. The paired photons are emitted at the telecom wavelength of $1310 nm$ within a bandwidth of $0.7 nm$. The quantum properties of the pairs are measured using a two-photon coalescence experiment showing a visibility of 85%. The evaluated source brightness, on the order of $10^5$ pairs $s^{-1} GHz^{-1} mW^{-1}$, associated with its compactness and reliability, demonstrates the source's high potential for long-distance quantum communication.

quant-ph

Breeding and Solitary Wave Behavior of Dunes

Beautiful dune patterns can be found in deserts and along coasts due to the instability of a plain sheet of sand under the action of the wind. Barchan dunes are highly mobile aeolian dunes found in areas of low sand availability and unidirectional wind fields. Up to now modelization mainly focussed on single dunes or dune patterns without regarding the mechanisms of dune interactions. We study the case when a small dune bumps into a bigger one. Recently Schwammle et al. and Katsuki et al. have shown that under certain circumstances dunes can behave like solitary waves. This means that they can ``cross'' each other which has been questioned by many researchers before. In other cases we observe coalescence, i.e. both dune merge into one, breeding, i.e. the creation of three baby dunes at the center and horns of a Barchan, or budding, i.e. the small dune, after ``crossing'' the big one, is unstable and splits into two new dunes.

cond-mat.other

A Model of Barchan Dunes Including Lateral Shear Stress

Barchan dunes are found where sand availability is low and wind direction quite constant. The two dimensional shear stress of the wind field and the sand movement by saltation and avalanches over a barchan dune are simulated. The resulting final shape is compared to the results of a model with a one dimensional shear stress. A characteristic edge at the center of the windward side is discovered which is also observed for big barchans. Diffusion effects reduce this effect for small dunes.

cond-mat

Models for Free Granular Surfaces

We introduce two sets of continuum equations to describe granular flow on a free surface and study their properties. The equations derived from a microscopic picture that includes jumps and a mobility threshold, account for ripple and crater formation.

cond-mat

Shocks in non-loaded bead chains with impurities

We numerically investigate the problem of the propagation of a shock in an horizontal non-loaded granular chain with a bead interaction force exponent varying from unity to large values. When $\alpha$ is close to unity we observed a cross-over between a nonlinearity-dominated regime and a solitonic one, the latest being the final steady state of the propagating wave. In the case of large values of $\alpha$ the deformation field given by the numerical simulations is completely different from the one obtained by analytical calculation. In the following we studied the interaction of these shock waves with a mass impurity placed in the bead chain. Two different physical pictures emerge whether we consider a light or a heavy impurity mass. The scatter of the shock wave with a light impurity yields damped oscillations of the impurity which then behave as a solitary wave source. Differently an heavy impurity is just shifted by the shock and the transmitted wave loses its solitonic character being fragmented into waves of decreasing amplitudes.

cond-mat.stat-mech

Crossover from directed percolation to compact directed percolation

We study critical spreading in a surface-modified directed percolation model in which the left- and right-most sites have different occupation probabilities than in the bulk. As we vary the probability for growth at an edge, the critical exponents switch from the compact directed percolation class to ordinary directed percolation. We conclude that the nonuniversality observed in models with multiple absorbing configurations cannot be explained as a simple surface effect.

cond-mat