Searcharxiv⌕ Search

arXiv subjects

H. Hu

Publications and source records attributed to H. Hu.

At least 37 records · Page 2Linked to original sources

The second data release from the European Pulsar Timing Array: VI. Challenging the ultralight dark matter paradigm

Pulsar Timing Array experiments probe the presence of possible scalar or pseudoscalar ultralight dark matter particles through decade-long timing of an ensemble of galactic millisecond radio pulsars. With the second data release of the European Pulsar Timing Array, we focus on the most robust scenario, in which dark matter interacts only gravitationally with ordinary baryonic matter. Our results show that ultralight particles with masses $10^{-24.0}~\text{eV} \lesssim m \lesssim 10^{-23.3}~\text{eV}$ cannot constitute $100\%$ of the measured local dark matter density, but can have at most local density $ρ\lesssim 0.3$ GeV/cm$^3$.

astro-ph.HE↗

Comparing recent PTA results on the nanohertz stochastic gravitational wave background

The Australian, Chinese, European, Indian, and North American pulsar timing array (PTA) collaborations recently reported, at varying levels, evidence for the presence of a nanohertz gravitational wave background (GWB). Given that each PTA made different choices in modeling their data, we perform a comparison of the GWB and individual pulsar noise parameters across the results reported from the PTAs that constitute the International Pulsar Timing Array (IPTA). We show that despite making different modeling choices, there is no significant difference in the GWB parameters that are measured by the different PTAs, agreeing within $1σ$. The pulsar noise parameters are also consistent between different PTAs for the majority of the pulsars included in these analyses. We bridge the differences in modeling choices by adopting a standardized noise model for all pulsars and PTAs, finding that under this model there is a reduction in the tension in the pulsar noise parameters. As part of this reanalysis, we "extended" each PTA's data set by adding extra pulsars that were not timed by that PTA. Under these extensions, we find better constraints on the GWB amplitude and a higher signal-to-noise ratio for the Hellings and Downs correlations. These extensions serve as a prelude to the benefits offered by a full combination of data across all pulsars in the IPTA, i.e., the IPTA's Data Release 3, which will involve not just adding in additional pulsars, but also including data from all three PTAs where any given pulsar is timed by more than as single PTA.

astro-ph.HE↗

Variability, polarimetry, and timing properties of single pulses from PSR J2222-0137 using FAST

In our work, we analyse $5\times10^{4}$ single pulses from the recycled pulsar PSR J2222$-$0137 in one of its scintillation maxima observed by the Five-hundred-meter Aperture Spherical radio Telescope (FAST). PSR J2222$-$0137 is one of the nearest and best studies of binary pulsars and a unique laboratory for testing gravitational theories. We report single pulses' energy distribution and polarization from the pulsar's main-pulse region. The single pulse energy follows the log-normal distribution. We resolve a steep polarization swing, but at the current time resolution ($64\,μ{\rm s}$), we find no evidence for the orthogonal jump in the main-pulse region, as has been suspected. We find a potential sub-pulse drifting period of $P_{3} \sim 3.5\,P$. We analyse the jitter noise from different integrated numbers of pulses and find that its $σ_{j}$ is $270\pm{9}\,{\rm ns}$ for 1-hr integration at 1.25 GHz. This result is useful for optimizing future timing campaigns with FAST or other radio telescopes.

astro-ph.HE↗

The second data release from the European Pulsar Timing Array I. The dataset and timing analysis

Pulsar timing arrays offer a probe of the low-frequency gravitational wave spectrum (1 - 100 nanohertz), which is intimately connected to a number of markers that can uniquely trace the formation and evolution of the Universe. We present the dataset and the results of the timing analysis from the second data release of the European Pulsar Timing Array (EPTA). The dataset contains high-precision pulsar timing data from 25 millisecond pulsars collected with the five largest radio telescopes in Europe, as well as the Large European Array for Pulsars. The dataset forms the foundation for the search for gravitational waves by the EPTA, presented in associated papers. We describe the dataset and present the results of the frequentist and Bayesian pulsar timing analysis for individual millisecond pulsars that have been observed over the last ~25 years. We discuss the improvements to the individual pulsar parameter estimates, as well as new measurements of the physical properties of these pulsars and their companions. This data release extends the dataset from EPTA Data Release 1 up to the beginning of 2021, with individual pulsar datasets with timespans ranging from 14 to 25 years. These lead to improved constraints on annual parallaxes, secular variation of the orbital period, and Shapiro delay for a number of sources. Based on these results, we derived astrophysical parameters that include distances, transverse velocities, binary pulsar masses, and annual orbital parallaxes.

astro-ph.HE↗

The second data release from the European Pulsar Timing Array II. Customised pulsar noise models for spatially correlated gravitational waves

The nanohertz gravitational wave background (GWB) is expected to be an aggregate signal of an ensemble of gravitational waves emitted predominantly by a large population of coalescing supermassive black hole binaries in the centres of merging galaxies. Pulsar timing arrays, ensembles of extremely stable pulsars, are the most precise experiments capable of detecting this background. However, the subtle imprints that the GWB induces on pulsar timing data are obscured by many sources of noise. These must be carefully characterized to increase the sensitivity to the GWB. In this paper, we present a novel technique to estimate the optimal number of frequency coefficients for modelling achromatic and chromatic noise and perform model selection. We also incorporate a new model to fit for scattering variations in the pulsar timing package temponest and created realistic simulations of the European Pulsar Timing Array (EPTA) datasets that allowed us to test the efficacy of our noise modelling algorithms. We present an in-depth analysis of the noise properties of 25 millisecond pulsars (MSPs) that form the second data release (DR2) of the EPTA and investigate the effect of incorporating low-frequency data from the Indian PTA collaboration. We use enterprise and temponest packages to compare noise models with those reported with the EPTA DR1. We find that, while in some pulsars we can successfully disentangle chromatic from achromatic noise owing to the wider frequency coverage in DR2, in others the noise models evolve in a more complicated way. We also find evidence of long-term scattering variations in PSR J1600$-$3053. Through our simulations, we identify intrinsic biases in our current noise analysis techniques and discuss their effect on GWB searches. The results presented here directly help improve sensitivity to the GWB and are already being used as part of global PTA efforts.

astro-ph.HE↗

The second data release from the European Pulsar Timing Array III. Search for gravitational wave signals

We present the results of the search for an isotropic stochastic gravitational wave background (GWB) at nanohertz frequencies using the second data release of the European Pulsar Timing Array (EPTA) for 25 millisecond pulsars and a combination with the first data release of the Indian Pulsar Timing Array (InPTA). We analysed (i) the full 24.7-year EPTA data set, (ii) its 10.3-year subset based on modern observing systems, (iii) the combination of the full data set with the first data release of the InPTA for ten commonly timed millisecond pulsars, and (iv) the combination of the 10.3-year subset with the InPTA data. These combinations allowed us to probe the contributions of instrumental noise and interstellar propagation effects. With the full data set, we find marginal evidence for a GWB, with a Bayes factor of four and a false alarm probability of $4\%$. With the 10.3-year subset, we report evidence for a GWB, with a Bayes factor of $60$ and a false alarm probability of about $0.1\%$ ($\gtrsim 3σ$ significance). The addition of the InPTA data yields results that are broadly consistent with the EPTA-only data sets, with the benefit of better noise modelling. Analyses were performed with different data processing pipelines to test the consistency of the results from independent software packages. The inferred spectrum from the latest EPTA data from new generation observing systems is rather uncertain and in mild tension with the common signal measured in the full data set. However, if the spectral index is fixed at 13/3, the two data sets give a similar amplitude of ($2.5\pm0.7)\times10^{-15}$ at a reference frequency of $1\,{\rm yr}^{-1}$. By continuing our detection efforts as part of the International Pulsar Timing Array (IPTA), we expect to be able to improve the measurement of spatial correlations and better characterise this signal in the coming years.

astro-ph.HE↗

Variable Scintillation Arcs of Millisecond Pulsars observed with the Large European Array for Pulsars

We present the first large sample of scintillation arcs in millisecond pulsars, analysing 12 sources observed with the Large European Array for Pulsars (LEAP), and the Effelsberg 100\,m telescope. We estimate the delays from multipath propagation, measuring significant correlated changes in scattering timescales over a 10-year timespan. Many sources show compact concentrations of power in the secondary spectrum, which in PSRs J0613$-$0200 and J1600$-$3053 can be tracked between observations, and are consistent with compact scattering at fixed angular positions. Other sources such as PSRs J1643$-$1224 and J0621+1002 show diffuse, asymmetric arcs which are likely related to phase-gradients across the scattering screen. PSR B1937+21 shows at least three distinct screens which dominate at different times and evidence of varying screen axes or multi-screen interactions. We model annual and orbital arc curvature variations in PSR J0613$-$0200, providing a measurement of the longitude of ascending node, resolving the sense of the orbital inclination, where our best fit model is of a screen with variable axis of anisotropy over time, corresponding to changes in the scattering of the source. Unmodeled variations of the screen's axis of anisotropy are likely to be a limiting factor in determining orbital parameters with scintillation, requiring careful consideration of variable screen properties, or independent VLBI measurements. Long-term scintillation studies such as this serve as a complementary tool to pulsar timing, to measure a source of correlated noise for pulsar timing arrays, solve pulsar orbits, and to understand the astrophysical origin of scattering screens.

astro-ph.HE↗

Softening of a flat phonon mode in the kagome ScV$_6$Sn$_6$

The long range electronic modulations recently discovered in the geometrically frustrated kagome lattice have opened new avenues to explore the effect of correlations in materials with topological electron flat bands. The observation of the lattice response to the emergent new phases of matter, a soft phonon mode, has remained elusive and the microscopic origin of charge density waves (CDWs) is still unknown. Here, we show, for the first time, a complete melting of the ScV$_ 6$Sn$_ 6$ (166) kagome lattice. The low energy phonon with propagation vector $\frac{1}{3} \frac{1}{3} \frac{1}{2}$ collapses at 98 K, without the emergence of long-range charge order, which sets in with a propagation vector $\frac{1}{3} \frac{1}{3} \frac{1}{3}$. The CDW is driven (but locks at a different vector) by the softening of an overdamped phonon flat plane at k$_z$=$π$. We observe broad phonon anomalies in momentum space, pointing to (1) the existence of approximately flat phonon bands which gain some dispersion due to electron renormalization, and (2) the effects of the momentum dependent electron-phonon interaction in the CDW formation. Ab initio and analytical calculations corroborate the experimental findings to indicate that the weak leading order phonon instability is located at the wave vector $\frac{1}{3} \frac{1}{3} \frac{1}{2}$ of a rather flat collapsed mode. We analytically compute the phonon frequency renormalization from high temperatures to the soft mode, and relate it to a peak in the orbital-resolved susceptibility, obtaining an excellent match with both ab initio and experimental results, and explaining the origin of the approximately flat phonon dispersion. Our data report the first example of the collapse of a softening of a flat phonon plane and promote the 166 compounds of the kagome family as primary candidates to explore correlated flat phonon-topological flat electron physics.

cond-mat.str-el↗

Searching for continuous Gravitational Waves in the second data release of the International Pulsar Timing Array

The International Pulsar Timing Array 2nd data release is the combination of datasets from worldwide collaborations. In this study, we search for continuous waves: gravitational wave signals produced by individual supermassive black hole binaries in the local universe. We consider binaries on circular orbits and neglect the evolution of orbital frequency over the observational span. We find no evidence for such signals and set sky averaged 95% upper limits on their amplitude h 95 . The most sensitive frequency is 10nHz with h 95 = 9.1 10-15 . We achieved the best upper limit to date at low and high frequencies of the PTA band thanks to improved effective cadence of observations. In our analysis, we have taken into account the recently discovered common red noise process, which has an impact at low frequencies. We also find that the peculiar noise features present in some pulsars data must be taken into account to reduce the false alarm. We show that using custom noise models is essential in searching for continuous gravitational wave signals and setting the upper limit.

gr-qc↗

A new pulsar timing model for scalar-tensor gravity with applications to PSR J2222-0137 and pulsar-black hole binaries

Context. Scalar-tensor gravity (STG) theories are well-motivated alternatives to general relativity (GR). One class of STG theories, the Damour-Esposito-Farese (DEF) gravity, has a massless scalar field with two arbitrary coupling parameters. We are interested in this theory because, despite its simplicity, it predicts a wealth of different phenomena, such as dipolar gravitational wave emission and spontaneous scalarization of neutron stars (NSs). These phenomena of DEF gravity can be tested by timing binary radio pulsars. Aims. We aim to develop a new binary pulsar timing model DDSTG to enable more precise tests of STG theories based on a minimal set of binary parameters. The expressions for post-Keplerian (PK) parameters in DEF gravity are self-consistently incorporated into the model. The new technique takes into account all possible correlations between PK parameters naturally. Methods. Grids of physical parameters of NSs are calculated in the framework of DEF gravity for a set of 11 equations of state. The automatic Differentiation (AutoDiff) technique is employed, which aids in the calculation of gravitational form factors of NSs with higher precision than in previous works. The pulsar timing program TEMPO is selected as a framework for the realization of the DDSTG model. The implemented model is applicable to any type of pulsar companions. Results. We apply the DDSTG model to the most recently published observational data for PSR J2222-0137. The obtained limits on DEF gravity parameters for this system confirm and improve previous results. New limits are also the most reliable because DEF gravity is directly fitted to the data. We argue that future observations of PSR J2222-0137 can significantly improve the limits and that PSR-BH systems have the potential to place the tightest limits in certain areas of the DEF gravity parameter space.

astro-ph.HE↗

Symmetric Kondo Lattice States in Doped Strained Twisted Bilayer Graphene

We use the topological heavy fermion (THF) model and its Kondo Lattice (KL) formulation to study the symmetric Kondo state in twisted bilayer graphene. Via a large-N approximation, we find a symmetric Kondo (SK) state in KL mode at fillings $ν=0,\pm 1,\pm 2$. In the SK state, all symmetries are preserved and the local moments are Kondo screened by the conduction electrons. At the mean-field level of the THF model at $ν=0,\pm 1, \pm 2, \pm 3$, we also find a similar symmetric state. We study the stability of the symmetric state by comparing its energy with the ordered states and find the ordered states to have lower energy. However, moving away from integer fillings by doping holes to the light bands, we find the energy difference is reduced, which suggests the loss of ordering and a tendency towards Kondo screening. In order to include many-body effects beyond the mean-field approximation, we perform dynamical mean-field theory (DMFT) calculations on the THF model. We find the spin susceptibility follows a Curie behavior at $ν=0, \pm 1,\pm 2$ down to $\sim 2\text{K}$ where the onset of screening of the local moment becomes visible. This hints to very low Kondo temperatures at these fillings, in agreement with the outcome of our mean-field calculations. At non-integer filling $ν=\pm 0.5,\pm 0.8,\pm 1.2$ DMFT shows deviations from a $1/T$-susceptibility at much higher temperatures, suggesting a more effective screening of local moments with doping. Finally, we study the effect of a $C_{3z}$-rotational-symmetry-breaking strain via mean-field approaches and find that a symmetric phase (that only breaks $C_{3z}$ symmetry) can be stabilized at sufficiently large strain at $ν=0,\pm 1, \pm 2$. Our results suggest that a symmetric Kondo phase is strongly suppressed at integer fillings, but could be stabilized either at non-integer fillings or by applying strain.

cond-mat.str-el↗

The applicability of transperceptual and deep learning approaches to the study and mimicry of complex cartilaginous tissues

Complex soft tissues, for example the knee meniscus, play a crucial role in mobility and joint health, but when damaged are incredibly difficult to repair and replace. This is due to their highly hierarchical and porous nature which in turn leads to their unique mechanical properties. In order to design tissue substitutes, the internal architecture of the native tissue needs to be understood and replicated. Here we explore a combined audio-visual approach - so called transperceptual - to generate artificial architectures mimicking the native ones. The proposed method uses both traditional imagery, and sound generated from each image as a method of rapidly comparing and contrasting the porosity and pore size within the samples. We have trained and tested a generative adversarial network (GAN) on the 2D image stacks. The impact of the training set of images on the similarity of the artificial to the original dataset was assessed by analyzing two samples. The first consisting of n=478 pairs of audio and image files for which the images were downsampled to 64 $\times$ 64 pixels, the second one consisting of n=7640 pairs of audio and image files for which the full resolution 256 $\times$ 256 pixels is retained but each image is divided into 16 squares to maintain the limit of 64 $\times$ 64 pixels required by the GAN. We reconstruct the 2D stacks of artificially generated datasets into 3D objects and run image analysis algorithms to characterize statistically the architectural parameters - pore size, tortuosity and pore connectivity - and compare them with the original dataset. Results show that the artificially generated dataset that undergoes downsampling performs better in terms of parameter matching. Our audiovisual approach has the potential to be extended to larger data sets to explore both how similarities and differences can be audibly recognized across multiple samples.

cs.CV↗

Gravitational signal propagation in the Double Pulsar studied with the MeerKAT telescope

The Double Pulsar, PSR J0737-3039A/B, has offered a wealth of gravitational experiments in the strong-field regime, all of which GR has passed with flying colours. In particular, among current gravity experiments that test photon propagation, the Double Pulsar probes the strongest spacetime curvature. Observations with MeerKAT and, in future, the SKA can greatly improve the accuracy of current tests and facilitate tests of NLO contributions in both orbital motion and signal propagation. We present our timing analysis of new observations of PSR J0737-3039A, made using the MeerKAT telescope over the last 3 years. The increased timing precision offered by MeerKAT yields a 2 times better measurement of Shapiro delay parameter s and improved mass measurements compared to previous studies. In addition, our results provide an independent confirmation of the NLO signal propagation effects and already surpass the previous measurement from 16-yr data by a factor of 1.65. These effects include the retardation effect due to the movement of B and the deflection of the signal by the gravitational field of B. We also investigate novel effects which are expected. For instance, we search for potential profile variations near superior conjunctions caused by shifts of the line-of-sight due to latitudinal signal deflection and find insignificant evidence with our current data. With simulations, we find that the latitudinal deflection delay is unlikely to be measured with timing because of its correlation with Shapiro delay. Furthermore, although it is currently not possible to detect the expected lensing correction to the Shapiro delay, our simulations suggest that this effect may be measured with the full SKA. Finally, we provide an improved analytical description for the signal propagation in the Double Pulsar system that meets the timing precision expected from future instruments such as the full SKA.

astro-ph.HE↗

Detection of quasi-periodic micro-structure in three millisecond pulsars with the Large European Array for Pulsars

We report on the detection of quasi-periodic micro-structure in three millisecond pulsars (MSPs), PSRs J1022+1001, J2145-0750 and J1744-1134, using high time resolution data acquired with the Large European Array for Pulsars at a radio frequency of 1.4 GHz. The occurrence rate of quasi-periodic micro-structure is consistent among pulses with different peak flux densities. Using an auto-correlation analysis, we measure the periodicity and width of the micro-structure in these three pulsars. The detected micro-structure from PSRs J1022+1001 and J1744-1134 is often highly linearly polarised. In PSR J1022+1001, the linear polarisation position angles of micro-structure pulses are in general flat with a small degree of variation. Using these results, we further examine the frequency and rotational period dependency of micro-structure properties established in previous work, along with the angular beaming and temporal modulation models that explains the appearance of micro-structure. We also discuss a possible link of micro-structure to the properties of some of the recently discovered fast radio bursts which exhibit a very similar emission morphology.

astro-ph.HE↗

Characterization of 128x128 MM-PAD-2.1 ASIC: A Fast Framing Hard X-Ray Detector with High Dynamic Range

We characterize a new x-ray Mixed-Mode Pixel Array Detector (MM-PAD-2.1) Application Specific Integrated Circuit (ASIC). Using an integrating pixel front-end with dynamic charge removal architecture, the MM-PAD-2.1 ASIC extends the maximum measurable x-ray signal (in 20 keV photon units) to > 10$^{7}$ x-rays/pixel/frame while maintaining a low read noise across the full dynamic range, all while imaging continuously at a frame rate of up to 10 kHz. The in-pixel dynamic charge removal mechanism prevents saturation of the input amplifier and proceeds in parallel with signal integration to achieve deadtime-less measurements with incident x-ray rates of > 10$^{10}$ x-rays/pixel/s. The ASIC format consists of 128$\times$128 square pixels each 150 $μ$m on a side and is designed to be 3-side buttable so large arrays can be effectively tiled. Here we use both laboratory x-ray sources and the Cornell High Energy Synchrotron Source (CHESS) to characterize two single ASIC prototype detectors for both low (single x-ray) and high incident flux detection. In the first detector the ASIC was solder bump-bonded to a 500 $μ$m thick Si sensor for efficient detection of x-rays below ~20 keV, whereas the second detector used a 750 $μ$m thick CdTe sensor for x-rays above $\sim$ 20 keV.

physics.ins-det↗

The International Pulsar Timing Array second data release: Search for an isotropic Gravitational Wave Background

We searched for an isotropic stochastic gravitational wave background in the second data release of the International Pulsar Timing Array, a global collaboration synthesizing decadal-length pulsar-timing campaigns in North America, Europe, and Australia. In our reference search for a power law strain spectrum of the form $h_c = A(f/1\,\mathrm{yr}^{-1})^α$, we found strong evidence for a spectrally-similar low-frequency stochastic process of amplitude $A = 3.8^{+6.3}_{-2.5}\times10^{-15}$ and spectral index $α= -0.5 \pm 0.5$, where the uncertainties represent 95\% credible regions, using information from the auto- and cross-correlation terms between the pulsars in the array. For a spectral index of $α= -2/3$, as expected from a population of inspiralling supermassive black hole binaries, the recovered amplitude is $A = 2.8^{+1.2}_{-0.8}\times10^{-15}$. Nonetheless, no significant evidence of the Hellings-Downs correlations that would indicate a gravitational-wave origin was found. We also analyzed the constituent data from the individual pulsar timing arrays in a consistent way, and clearly demonstrate that the combined international data set is more sensitive. Furthermore, we demonstrate that this combined data set produces comparable constraints to recent single-array data sets which have more data than the constituent parts of the combination. Future international data releases will deliver increased sensitivity to gravitational wave radiation, and significantly increase the detection probability.

astro-ph.HE↗

Modelling annual scintillation arc variations in PSR J1643-1224 using the Large European Array for Pulsars

In this work we study variations in the parabolic scintillation arcs of the binary millisecond pulsar PSR J1643-1224 over five years using the Large European Array for Pulsars (LEAP). The 2D power spectrum of scintillation, called the secondary spectrum, often shows a parabolic distribution of power, where the arc curvature encodes the relative velocities and distances of the pulsar, ionised interstellar medium (IISM), and Earth. We observe a clear parabolic scintillation arc which varies in curvature throughout the year. The distribution of power in the secondary spectra are inconsistent with a single scattering screen which is fully 1D, or entirely isotropic. We fit the observed arc curvature variations with two models; an isotropic scattering screen, and a model with two independent 1D screens. We measure the distance to the scattering screen to be in the range 114-223 pc, depending on the model, consistent with the known distance of the foreground large-diameter HII region Sh 2-27 (112+/-17 pc), suggesting that it is the dominant source of scattering. We obtain only weak constraints on the pulsar's orbital inclination and angle of periastron, since the scintillation pattern is not very sensitive to the pulsar's motion, since the screen is much closer to the Earth than the pulsar. More measurements of this kind - where scattering screens can be associated with foreground objects - will help to inform the origins and distribution of scattering screens within our galaxy.

astro-ph.HE↗

A comparative analysis of pulse time-of-arrival creation methods

Extracting precise pulse times of arrival (TOAs) and their uncertainties is the first and most fundamental step in high-precision pulsar timing. In the classical method, TOAs are derived from total intensity pulse profiles of pulsars via cross-correlation with an idealised `1D' template of that profile. While a number of results have been presented in the literature relying on the ever increasing sensitivity of such pulsar timing experiments, there is no consensus on the most reliable methods for TOA creation and, more importantly, the associated TOA uncertainties for each scheme. In this article, we present a comprehensive comparison of TOA determination practices, focusing on the creation of timing templates, TOA determination methods and the most useful TOA bandwidth. The aim is both to present a possible approach towards TOA optimisation as well as the (partial) identification of an optimal TOA-creation scheme and the demonstration of optimisation differences between pulsars and data sets. We compare the values of data-derived template profiles as compared to analytic profiles and evaluate the three most commonly used template-matching methods. Finally, we study the relation between timing precision and TOA bandwidth to identify any potential breaks in that relationship. As a practical demonstration, we apply our selected methods to European Pulsar Timing Array data on the three test pulsars PSRs\ J0218+4232, J1713+0747 and J2145$-$0750.

astro-ph.IM↗