arXiv subjects

H. Idei

Publications and source records attributed to H. Idei.

5 recordsLinked to original sources

arXiv2026

Beam-Tracing-Based Quantitative Reconstruction of Density Fluctuations in QUEST Using Doppler Backscattering

A three-channel X-/Ku-band Doppler backscattering (DBS) system has been developed and installed on QUEST for turbulence and electric-field measurements. In spherical tokamaks, the large magnetic-field pitch angle increases the geometric mismatch between the probing beam wave vector and the local magnetic-field vector, reducing the effective perpendicular projection and resulting in a systematic underestimation of the measured scattering intensity. In addition, in QUEST, where low plasma density requires a low-frequency probe beam, beam propagation effects become increasingly significant, further complicating the interpretation of the measured DBS power in terms of local density fluctuation amplitude. To address these issues, a quantitative correction methodology based on the synthetic DBS code SCOTTY was established. All relevant diagnostic response effects were evaluated using SCOTTY along ray trajectories, yielding a correction factor for reconstructing the local turbulence amplitude from the measured scattering signal. The correction factor exhibits strong spatial and frequency dependence, varying by up to an order of magnitude between the plasma core and edge regions, highlighting the necessity of frequency-dependent corrections. By applying the derived correction factor to experimental measurements, quantitative density fluctuation amplitudes were reconstructed from the detected scattering signals. Evaluation of the fluctuation amplitude indicates enhanced turbulence activity in the plasma edge region, where a finite negative radial electric field is inferred. This work demonstrates the first quantitative turbulence evaluation using low-frequency X-/Ku-band DBS measurements in QUEST and establishes a framework for quantitative DBS analysis in spherical tokamaks.

physics.plasm-ph↗

arXiv2018

Temperature-dependent local structure of superconducting BaPd$_2$As$_2$ and SrPd$_2$As$_2$

The local structures of 122-type paradium arsenides, namely BaPd$_2$As$_2$ and SrPd$_2$As$_2$, are examined by As K-edge extended x-ray absorption fine structure measurements to find a possible correlation between the variation of their superconducting transition temperature and the local structure. The local atomic distances are found to be consistent with average distances measured by diffraction techniques. The temperature dependence of mean square relative displacements reveal that, while BaPd$_2$As$_2$ is characterized by a local As-Pd soft mode, albeit with larger atomic disorder, SrPd$_2$As$_2$ shows anomalous As-Pd correlations with a kink at $\sim$160 K due to hardening by raising temperature. We have discussed implications of these results and possible mechanism of differing superconducting transition temperature in relation with the structural instability.

cond-mat.supr-con↗

arXiv2004

Ion acceleration during internal magnetic reconnection events in TST-2

Characteristics of ion acceleration in the internal magnetic reconnection events (IRE) have been studied by means of a neutral particle energy analyzer (NPA) in Tokyo Spherical Tokamak (TST-2). The major and minor radii are 0.38 m and 0.25m, respectively. The magnetic field strength is 0.3T and the maximum plasma current is up to 140 kA. The electron and ion temperatures are 0.4-0.5 keV and 0.1 keV, respectively and the electron density is ~1x1019 m-3. The NPA can be scanned toroidally from q = 74° (cw) to q = 114° (ccw), where q = 90° corresponds to the perpendicular sightline. The direction of the plasma current is cw. The NPA signals are digitized at every 50 ms. The NPA is calibrated in the energy range of 0.1 keV < E < 8.4 keV. When the IRE occurs, it is observed that the plasma current increases by ~ 20% and the loop voltage drops from 0.6 V to-5 V for ~ 0.1 ms. The enhanced charge exchange flux is observed by more than one order of magnitude at ~ 1 keV for this reconnection phase. The ion temperature increases by 80 eV at IREs. The angle q dependence of increment of Ti shows that DTi (q = 74°) is higher than that for q = 114°. This observation suggests that an ion is accelerated initially in the direction of magnetic field lines. The time evolution of the ion distribution function is simulated with a Fokker-Planck code taking into account the electric field effects.

physics.plasm-ph↗

arXiv2004

Estimation of Power Balance in Steady State LHCD Discharges on TRIAM-1M

On TRIAM-1M, a long duration discharge for more than 5 h was achieved successfully by fully non-inductive lower hybrid current drive. Heat load distribution to the plasma facing components (PFCs) in the 5 h discharge was investigated by using calorimetric measurements. The injected RF power was coincident with the total amount of heat load to PFCs estimated by calorimetric measurement. The power balance including the portion of direct loss power of fast electron, heat flux due to the charge exchange process was able to be estimated in this long duration discharge.

physics.plasm-ph↗

arXiv2004

Transport barrier formation by LHCD on TRIAM-1M

Internal transport barrier (ITB) has been obtained in full lower hybrid current driven (LHCD) plasmas on a superconducting tokamak, TRIMA-1M (R=0.84m, a x b=0.12mx0.18m, BT<8T). The formation of ITB depends on the current density profile, j(r), varied by the power deposition of the lower hybrid (LH). The plasma with ITB can be maintained by the LH power deposited around the foot point of ITB up to 25 sec, which corresponds to more than 100 times of current diffusion time, $τ$L/R. ITB is terminated by the reduction of current drive efficiency caused by metal impurities accumulation. In some condition, self-organized slow sawtooth oscillations (SSSO) of plasma current, density, temperature, and so on with the period comparable to the current diffusion time have been also observed during ITB discharge. The oscillation has the capability of particle exhaust, as the result, it may play an role in the avoidance of the impurity accumulation and the dilution in the future steady state fusion plasma with ITB, as the edge-localized mode in H-mode.

physics.plasm-ph↗