arXiv subjects

H. J. Yang

Publications and source records attributed to H. J. Yang.

13 recordsLinked to original sources

arXiv2026

Development of a high-granularity, high-precision timing readout electronics system for large-area MRPC detectors

Multi-gap Resistive Plate Chamber (MRPC) detectors offer excellent time resolution and detection efficiency, creating a strong demand for high-precision, highly scalable timing readout systems. In this work, a readout electronics system is designed for a large-area 100*100 cm MRPC detector containing 2400 high-granularity 2*2 cm pad channels. The system consists of two Front-End Boards (FEBs), a central clock distribution module, and a back-end DAQ aggregator. Each FEB is equipped with 40 32-channel PETIROC2B ASICs mounted directly behind the sensing pads. An automated S-curve calibration procedure equalizes the baseline dispersion across all 2400 channels, reducing the FWHM of the baseline voltage distribution from 50 mV to 12 mV and establishing a uniform triggering threshold. Signal-injection measurements confirm an intrinsic single-channel electronic time resolution of 33 ps RMS, alongside inter-chip and inter-board time resolutions of 43 ps RMS and 45 ps RMS, respectively. This high-granularity, high-precision timing readout system can be widely applied to Time-of-Flight systems, cosmic-ray muon imaging, as well as other fast-timing detector systems.

physics.ins-det↗

arXiv2025

The T-SDHCAL Hadronic Calorimeter for a Future Higgs factory

The CALICE technological RPC-based SDHCAL prototype that fullfils all the requirements of compactness, hermeticity and power budget of the future lepton accelerator experiments, has been extensively tested and has provided excellent results in terms of the energy resolution and shower separation. A new phase of R&D to validate completely the SDHCAL option for the International Linear Detector (ILD) project of the ILC and also the Circular Electron Positron Collider (CEPC and FCCee) has started with the conception and the realization of new prototypes. The new prototype proposes to exploit the excellent time resolution that can be provided by multi-gap resistive plate chamber detectors in order to better build the hadronic showers with the aim to separate close-by ones and also to single out the contribution of delayed neutrons with the purpose to improve on the Particle Flow Algorithm performances and better reconstruct the showers energy. A new technique to build multi-gap resistive plate chambers has been developed and first results confirm the excellent efficiency of the new detectors. The timing performance is under study using the PETIROC ASIC developed by the OMEGA group. The progress realized on the different aspects of the new concept will be presented and the future steps will be discussed.

physics.ins-det↗

arXiv2022

Energy reconstruction of hadronic showers at the CERN PS and SPS using the Semi-Digital Hadronic Calorimeter

The CALICE Semi-Digital Hadronic CALorimeter (SDHCAL) is the first technological prototype in a family of high-granularity calorimeters developed by the CALICE Collaboration to equip the experiments of future lepton colliders. The SDHCAL is a sampling calorimeter using stainless steel for absorber and Glass Resistive Plate Chambers (GRPC) as a sensitive medium. The GRPC are read out by 1~cm $\times$ 1~cm pickup pads combined to a multi-threshold electronics. The prototype was exposed to hadron beams in both the CERN PS and the SPS beamlines in 2015 allowing the test of the SDHCAL in a large energy range from 3~GeV to 80~GeV. After introducing the method used to select the hadrons of our data and reject the muon and electron contamination, we present the energy reconstruction approach that we apply to the data collected from both beamlines and we discuss the response linearity and the energy resolution of the SDHCAL. The results obtained in the two beamlines confirm the excellent SDHCAL performance observed with the data collected with the same prototype in the SPS beamline in 2012. They also show the stability of the SDHCAL in different beam conditions and different time periods.

hep-ex↗

arXiv2020

Particle Identification Using Boosted Decision Trees in the Semi-Digital Hadronic Calorimeter Prototype

The CALICE Semi-Digital Hadronic CALorimeter (SDHCAL) prototype using Glass Resistive Plate Chambers as a sensitive medium is the first technological prototype of a family of high-granularity calorimeters developed by the CALICE collaboration to equip the experiments of future leptonic colliders. It was exposed to beams of hadrons, electrons and muons several times in the CERN PS and SPS beamlines between 2012 and 2018. We present here a new method of particle identification within the SDHCAL using the Boosted Decision Trees (BDT) method applied to the data collected in 2015. The performance of the method is tested first with Geant4-based simulated events and then on the data collected by the SDHCAL in the energy range between 10 and 80~GeV with 10~GeV energy steps. The BDT method is then used to reject the electrons and muons that contaminate the SPS hadron beams.

physics.ins-det↗

arXiv2016

Performance Analysis of License Assisted Access LTE with Asymmetric Hidden Terminals

License Assisted Access (LAA) LTE (LTE-LAA) is a new type of LTE that aggregates the licensed LTE bands with the unlicensed bands via carrier aggregation. To operate in unlicensed bands, LTE-LAA adopts the listen-before-talk policy and designs its channel access mechanism similar to WLAN's DCF. In this paper, we consider an LAA network consisting of an LTE-LAA eNB coexisting with a Wi-Fi STA, and capture the {\em asymmetric hidden terminal problem} where the eNB recognizes the STA while the opposite is not true, which is caused by the asymmetric CCA thresholds between them. We model the network as a joint Markov chain (MC) consisting of two individual MCs, and derive its steady-state probabilities, throughput, and channel access delay along with other key metrics like transmit, busy, collision, and doubling probabilities. Through extensive evaluation, we confirm that the proposed model well predicts the dynamics of the LAA network, and identify important design guidelines for fair coexistence between LTE-LAA and WLAN as follows. First, LTE-LAA should design its contention window (CW) doubling policy by considering Wi-Fi's packet duration and subframe-dependent collision probabilities. Second, there exists a tradeoff between throughput and channel access delay, according to which the CW doubling policy should be adapted.

cs.NI↗

arXiv2012

Test of Lorentz and CPT violation with Short Baseline Neutrino Oscillation Excesses

The sidereal time dependence of MiniBooNE electron neutrino and anti-electron neutrino appearance data are analyzed to search for evidence of Lorentz and CPT violation. An unbinned Kolmogorov-Smirnov test shows both the electron neutrino and anti-electron neutrino appearance data are compatible with the null sidereal variation hypothesis to more than 5%. Using an unbinned likelihood fit with a Lorentz-violating oscillation model derived from the Standard Model Extension (SME) to describe any excess events over background, we find that the electron neutrino appearance data prefer a sidereal time-independent solution, and the anti-electron neutrino appearance data slightly prefer a sidereal time-dependent solution. Limits of order 10E-20 GeV are placed on combinations of SME coefficients. These limits give the best limits on certain SME coefficients for muon neutrino to electron neutrino and anti-muon neutrino to anti-electron neutrino oscillations. The fit values and limits of combinations of SME coefficients are provided.

hep-ex↗

arXiv2011

Measurement of Neutrino-Induced Charged-Current Charged Pion Production Cross Sections on Mineral Oil at E$_ν\sim 1~\textrm{GeV}$

Using a high-statistics, high-purity sample of $ν_μ$-induced charged current, charged pion events in mineral oil (CH$_2$), MiniBooNE reports a collection of interaction cross sections for this process. This includes measurements of the CC$π^+$ cross section as a function of neutrino energy, as well as flux-averaged single- and double-differential cross sections of the energy and direction of both the final-state muon and pion. In addition, each of the single-differential cross sections are extracted as a function of neutrino energy to decouple the shape of the MiniBooNE energy spectrum from the results. In many cases, these cross sections are the first time such quantities have been measured on a nuclear target and in the 1 GeV energy range.

hep-ex↗

arXiv2011

Measurement of $ν_μ$-induced charged-current neutral pion production cross sections on mineral oil at $E_ν\in0.5-2.0$ GeV

Using a custom 3 Čerenkov-ring fitter, we report cross sections for $ν_μ$-induced charged-current single $π^0$ production on mineral oil (\chtwo) from a sample of 5810 candidate events with 57% signal purity over an energy range of $0.5-2.0$GeV. This includes measurements of the absolute total cross section as a function of neutrino energy, and flux-averaged differential cross sections measured in terms of $Q^2$, $μ^-$ kinematics, and $π^0$ kinematics. The sample yields a flux-averaged total cross section of $(9.2\pm0.3_{stat.}\pm1.5_{syst.})\times10^{-39}$cm$^2$/CH$_2$ at mean neutrino energy of 0.965GeV.

hep-ex↗

arXiv2010

First Measurement of the Muon Neutrino Charged Current Quasielastic Double Differential Cross Section

A high-statistics sample of charged-current muon neutrino scattering events collected with the MiniBooNE experiment is analyzed to extract the first measurement of the double differential cross section ($\frac{d^2σ}{dT_μd\cosθ_μ}$) for charged-current quasielastic (CCQE) scattering on carbon. This result features minimal model dependence and provides the most complete information on this process to date. With the assumption of CCQE scattering, the absolute cross section as a function of neutrino energy ($σ[E_ν]$) and the single differential cross section ($\frac{dσ}{dQ^2}$) are extracted to facilitate comparison with previous measurements. These quantities may be used to characterize an effective axial-vector form factor of the nucleon and to improve the modeling of low-energy neutrino interactions on nuclear targets. The results are relevant for experiments searching for neutrino oscillations.

hep-ex↗

arXiv2010

Measurement of ν_μand \barν_μinduced neutral current single $π^0$ production cross sections on mineral oil at E_νO(1 GeV)

MiniBooNE reports the first absolute cross sections for neutral current single π^0 production on CH_2 induced by neutrino and antineutrino interactions measured from the largest sets of NC π^0 events collected to date. The principal result consists of differential cross sections measured as functions of π^0 momentum and π^0 angle averaged over the neutrino flux at MiniBooNE. We find total cross sections of (4.76+/-0.05_{stat}+/-0.76_{sys})*10^{-40} cm^2/nucleon at a mean energy of =808 MeV and (1.48+/-0.05_{stat}+/-0.23_{sys})*10^{-40} cm^2/nucleon at a mean energy of =664 MeV for ν_μand \barν_μinduced production, respectively. In addition, we have included measurements of the neutrino and antineutrino total cross sections for incoherent exclusive NC 1π^0 production corrected for the effects of final state interactions to compare to prior results.

hep-ex↗

arXiv2009

First Measurement of $ν_μ$ and $ν_e$ Events in an Off-Axis Horn-Focused Neutrino Beam

We report the first observation of off-axis neutrino interactions in the MiniBooNE detector from the NuMI beamline at Fermilab. The MiniBooNE detector is located 745 m from the NuMI production target, at 110 mrad angle ($6.3^{\circ}$) with respect to the NuMI beam axis. Samples of charged current quasi-elastic $ν_μ$ and $ν_e$ interactions are analyzed and found to be in agreement with expectation. This provides a direct verification of the expected pion and kaon contributions to the neutrino flux and validates the modeling of the NuMI off-axis beam.

hep-ex↗

arXiv2009

Measurement of the ν_μcharged current π^+ to quasi-elastic cross section ratio on mineral oil in a 0.8 GeV neutrino beam

Using high statistics samples of charged current $ν_μ$ interactions, MiniBooNE reports a measurement of the single charged pion production to quasi-elastic cross section ratio on mineral oil (CH$_2$), both with and without corrections for hadron re-interactions in the target nucleus. The result is provided as a function of neutrino energy in the range 0.4 GeV $< E_ν<$ 2.4 GeV with 11% precision in the region of highest statistics. The results are consistent with previous measurements and the prediction from historical neutrino calculations.

hep-ex↗

arXiv2008

First Observation of Coherent $π^0$ Production in Neutrino Nucleus Interactions with $E_ν<$ 2 GeV

The MiniBooNE experiment at Fermilab has amassed the largest sample to date of $π^0$s produced in neutral current (NC) neutrino-nucleus interactions at low energy. This paper reports a measurement of the momentum distribution of $π^0$s produced in mineral oil (CH$_2$) and the first observation of coherent $π^0$ production below 2 GeV. In the forward direction, the yield of events observed above the expectation for resonant production is attributed primarily to coherent production off carbon, but may also include a small contribution from diffractive production on hydrogen. Integrated over the MiniBooNE neutrino flux, the sum of the NC coherent and diffractive modes is found to be (19.5 $\pm$1.1 (stat) $\pm$2.5 (sys))% of all exclusive NC $π^0$ production at MiniBooNE. These measurements are of immediate utility because they quantify an important background to MiniBooNE's search for $ν_μ \to ν_e$ oscillations.

hep-ex↗