arXiv subjects

H. Jansen

Publications and source records attributed to H. Jansen.

12 recordsLinked to original sources

arXiv2026

Euclid: Quick Data Release (Q1) -- LensMC shear measurement catalogue for cluster lensing science

We present a LensMC lensing analysis of Euclid Quick Release 1 images that were made available in March 2025. We measured shapes, positions, weights, and other morphological parameters of galaxies with a surface number density of $26\;\text{arcmin}^{-2}$ for $I_{\scriptscriptstyle\rm E}<24.5$, achieving 75 arcmin$^{-2}$ for $I_{\scriptscriptstyle\rm E}<27$, in 63 deg$^2$ of Euclid VIS images. This is the first shear measurement catalogue produced with \lensmc in anticipation of the Euclid Data Release 1. To within the scope of this work and availability of survey volume, we found no spatial dependency in the additive biases. However, we developed an empirical bias correction based jointly on galaxy sizes and magnitudes, which was applied to the measurement of the lensing signal over the whole area. In order to validate the quality of our measurements, we calculated two-point statistics and cluster profile measurements, and cross-checked results with external cluster catalogues from WISE and the Dark Energy Survey. Additionally, by stacking shear profiles of random clusters we found that the low-redshift, large radii bins may be still contaminated by residual systematic effects. Thanks to Euclid image resolution and depth and overall good control of systematic errors, we are able to constrain the lensing profiles of clusters with masses of $10^{14}M_\odot$ out to $z\approx2$ over nearly 10 Gyr of evolution history.

astro-ph.CO↗

arXiv2026

Euclid preparation. Refining input galaxy shape distributions for shear calibration simulations

The Euclid Wide Survey (EWS) will cover the majority of the extragalactic sky with a resolution similar to the Hubble Space Telescope. This unprecedented data set will introduce a new era of precision cosmology. However, systematic effects need to be controlled better than ever. One of the sources of systematic uncertainties in weak gravitational lensing are biases introduced during the shear measurement. Determining these biases precisely allows the calibration of cosmological measurements to within Euclid's required accuracy. The simulations that are used to determine such biases, need to resemble the real observations. In this work, we aim to learn distributions of galaxy shape parameters from real Euclid data and use the new information to augment the morphological information in the Flagship galaxy mock catalogue. The morphology is extracted using single and double-S\'ersic model fits to the real data, for which we use SourceXtractor++. We train our pipeline on deep Euclid observations of a field with rich auxiliary data and then use it to simulate EWS-like data. In these simulations we compare the multiplicative bias between the morphology from the Flagship catalogue, the trained single-S\'ersic morphology, and the trained double-S\'ersic morphology. We find that the image simulations with the updated morphology result in a percent-level change in the multiplicative shear bias compared to the original morphology from Flagship. This bias exceeds Euclid's tight error budget by a factor of five and underlines the need for this work. Furthermore, we study the sensitivity of the multiplicative bias to key morphological parameters and show that our approach satisfies the requirements for the cosmology analysis with the first data release of Euclid.

astro-ph.CO↗

arXiv2025

The SRG/eROSITA All-Sky Survey $J$-Band Follow-Up Observations for Selected High-Redshift Galaxy Cluster Candidates

We select galaxy cluster candidates from the high-redshift (BEST_Z > 0.9) end of the first SRG/eROSITA All-Sky Survey (eRASS1) galaxy cluster catalogue, for which we obtain moderately deep J-band imaging data with the OMEGA2000 camera at the 3.5m telescope of the Calar Alto Observatory. We include J-band data of four additional targets obtained with the three-channel camera at the 2m Fraunhofer telescope at the Wendelstein Observatory. We complement the new J-band photometric catalogue with forced photometry in the i- and z-bands of the tenth data release of the Legacy Survey (LSDR10) to derive the radial colour distribution around the eRASS1 clusters. Without assuming a priori to find a cluster red sequence at a specific colour, we try to find a radially weighted colour over-density to confirm the presence of high-redshift optical counterparts for the X-ray emission. We compare our confirmation with optical properties derived in earlier works based on LSDR10 data to refine the existing high-redshift cluster confirmation of eROSITA-selected clusters. We attempt to calibrate the colour-redshift-relation including the new J-band data by comparing our obtained photometric redshift estimate with the spectroscopic redshift of a confirmed, optically selected, high-redshift galaxy cluster. We confirm 9 out of 18 of the selected galaxy cluster candidates with a radial over-density of similar coloured galaxies for which we provide a photometric redshift estimate. We can report an increase in the relative colour measurement precision from 8% to 4% when including J-band data. In conclusion, our findings indicate a not insignificant spurious contaminant fraction at the high-redshift end (BEST_Z > 0.9) of the eROSITA/eRASS1 galaxy cluster catalogue, as well as it underlines the necessity for wide and deep near infrared imaging data for confirmation and characterisation of high-$z$ galaxy clusters.

astro-ph.CO↗

arXiv2025

Euclid: Early Release Observations. Weak gravitational lensing analysis of Abell 2390

The Euclid space telescope of the European Space Agency (ESA) is designed to provide sensitive and accurate measurements of weak gravitational lensing distortions over wide areas on the sky. Here we present a weak gravitational lensing analysis of early Euclid observations obtained for the field around the massive galaxy cluster Abell 2390 as part of the Euclid Early Release Observations programme. We conduct galaxy shape measurements using three independent algorithms (LensMC, KSB+, and SourceXtractor++). Incorporating multi-band photometry from Euclid and Subaru/Suprime-Cam, we estimate photometric redshifts to preferentially select background sources from tomographic redshift bins, for which we calibrate the redshift distributions using the self-organising map approach and data from the Cosmic Evolution Survey (COSMOS). We quantify the residual cluster member contamination and correct for it in bins of photometric redshift and magnitude using their source density profiles, including corrections for source obscuration and magnification. We reconstruct the cluster mass distribution and jointly fit the tangential reduced shear profiles of the different tomographic bins with spherical Navarro--Frenk--White profile predictions to constrain the cluster mass, finding consistent results for the three shape catalogues and good agreement with earlier measurements. As an important validation test we compare these joint constraints to mass measurements obtained individually for the different tomographic bins, finding good consistency. More detailed constraints on the cluster properties are presented in a companion paper that additionally incorporates strong lensing measurements. Our analysis provides a first demonstration of the outstanding capabilities of Euclid for tomographic weak lensing measurements.

astro-ph.CO↗

arXiv2024

Euclid preparation. LXVII. Deep learning true galaxy morphologies for weak lensing shear bias calibration

To date, galaxy image simulations for weak lensing surveys usually approximate the light profiles of all galaxies as a single or double S\'ersic profile, neglecting the influence of galaxy substructures and morphologies deviating from such a simplified parametric characterization. While this approximation may be sufficient for previous data sets, the stringent cosmic shear calibration requirements and the high quality of the data in the upcoming Euclid survey demand a consideration of the effects that realistic galaxy substructures have on shear measurement biases. Here we present a novel deep learning-based method to create such simulated galaxies directly from HST data. We first build and validate a convolutional neural network based on the wavelet scattering transform to learn noise-free representations independent of the point-spread function of HST galaxy images that can be injected into simulations of images from Euclid's optical instrument VIS without introducing noise correlations during PSF convolution or shearing. Then, we demonstrate the generation of new galaxy images by sampling from the model randomly and conditionally. Next, we quantify the cosmic shear bias from complex galaxy shapes in Euclid-like simulations by comparing the shear measurement biases between a sample of model objects and their best-fit double-S\'ersic counterparts. Using the KSB shape measurement algorithm, we find a multiplicative bias difference between these branches with realistic morphologies and parametric profiles on the order of $6.9\times 10^{-3}$ for a realistic magnitude-S\'ersic index distribution. Moreover, we find clear detection bias differences between full image scenes simulated with parametric and realistic galaxies, leading to a bias difference of $4.0\times 10^{-3}$ independent of the shape measurement method. This makes it relevant for stage IV weak lensing surveys such as Euclid.

astro-ph.CO↗

arXiv2024

Euclid: Improving the efficiency of weak lensing shear bias calibration. Pixel noise cancellation and the response method on trial

To obtain an accurate cosmological inference from upcoming weak lensing surveys such as the one conducted by Euclid, the shear measurement requires calibration using galaxy image simulations. We study the efficiency of different noise cancellation methods that aim at reducing the simulation volume required to reach a given precision in the shear measurement. Explicitly, we compared fit methods with different noise cancellations and a method based on responses. We used GalSim to simulate galaxies both on a grid and at random positions in larger scenes. Placing the galaxies at random positions requires their detection, which we performed with SExtractor. On the grid, we neglected the detection step and, therefore, the potential detection bias arising from it. The shear of the simulated images was measured with the fast moment-based method KSB, for which we note deviations from purely linear shear measurement biases. For the estimation of uncertainties, we used bootstrapping as an empirical method. We find that each method we studied on top of shape noise cancellation can further increase the efficiency of calibration simulations. The improvement depends on the considered shear amplitude range and the type of simulations (grid-based or random positions). The response method on a grid for small shears provides the biggest improvement. In the more realistic case of randomly positioned galaxies, we still find an improvement factor of 70 for small shears using the response method. Alternatively, the runtime can be lowered by a factor of 7 already using pixel noise cancellation on top of shape noise cancellation. Furthermore, we demonstrate that the efficiency of shape noise cancellation can be enhanced in the presence of blending if entire scenes are rotated instead of individual galaxies.

astro-ph.CO↗

arXiv2020

Report on the ECFA Early-Career Researchers Debate on the 2020 European Strategy Update for Particle Physics

A group of Early-Career Researchers (ECRs) has been given a mandate from the European Committee for Future Accelerators (ECFA) to debate the topics of the current European Strategy Update (ESU) for Particle Physics and to summarise the outcome in a brief document [1]. A full-day debate with 180 delegates was held at CERN, followed by a survey collecting quantitative input. During the debate, the ECRs discussed future colliders in terms of the physics prospects, their implications for accelerator and detector technology as well as computing and software. The discussion was organised into several topic areas. From these areas two common themes were particularly highlighted by the ECRs: sociological and human aspects; and issues of the environmental impact and sustainability of our research.

hep-ex↗

arXiv2019

EUDAQ $-$ A Data Acquisition Software Framework for Common Beam Telescopes

EUDAQ is a generic data acquisition software developed for use in conjunction with common beam telescopes at charged particle beam lines. Providing high-precision reference tracks for performance studies of new sensors, beam telescopes are essential for the research and development towards future detectors for high-energy physics. As beam time is a highly limited resource, EUDAQ has been designed with reliability and ease-of-use in mind. It enables flexible integration of different independent devices under test via their specific data acquisition systems into a top-level framework. EUDAQ controls all components globally, handles the data flow centrally and synchronises and records the data streams. Over the past decade, EUDAQ has been deployed as part of a wide range of successful test beam campaigns and detector development applications.

physics.ins-det↗

arXiv2019

EUDAQ2 -- A Flexible Data Acquisition Software Framework for Common Test Beams

The data acquisition software framework, EUDAQ, was originally developed to read out data from the EUDET-type pixel telescopes. This was successfully used in many test beam campaigns in which an external position and time reference were required. The software has recently undergone a significant upgrade, EUDAQ2, which is a generic, modern and modular system for use by many different detector types, ranging from tracking detectors to calorimeters. EUDAQ2 is suited as an overarching software that links individual detector readout systems and simplifies the integration of multiple detectors. The framework itself supports several triggering and event building modes. This flexibility makes test beams with multiple detectors significantly easier and more efficient, as EUDAQ2 can adapt to the characteristics of each detector prototype during testing. The system has been thoroughly tested during multiple test beams involving different detector prototypes. EUDAQ2 has now been released and is freely available under an open-source license.

physics.ins-det↗

arXiv2019

Detector Technologies for CLIC

The Compact Linear Collider (CLIC) is a high-energy high-luminosity linear electron-positron collider under development. It is foreseen to be built and operated in three stages, at centre-of-mass energies of 380 GeV, 1.5 TeV and 3 TeV, respectively. It offers a rich physics program including direct searches as well as the probing of new physics through a broad set of precision measurements of Standard Model processes, particularly in the Higgs-boson and top-quark sectors. The precision required for such measurements and the specific conditions imposed by the beam dimensions and time structure put strict requirements on the detector design and technology. This includes low-mass vertexing and tracking systems with small cells, highly granular imaging calorimeters, as well as a precise hit-time resolution and power-pulsed operation for all subsystems. A conceptual design for the CLIC detector system was published in 2012. Since then, ambitious R&D programmes for silicon vertex and tracking detectors, as well as for calorimeters have been pursued within the CLICdp, CALICE and FCAL collaborations, addressing the challenging detector requirements with innovative technologies. This report introduces the experimental environment and detector requirements at CLIC and reviews the current status and future plans for detector technology R&D.

physics.ins-det↗

arXiv2018

Summary and Conclusions of the 'JRA Beam Telescope 2025'-Forum at the 6th Beam Telescopes and Test Beams Workshop

On January 17th 2018, a forum on a possible Joint Research Activity on a future common Beam Telescope was held during the 6th Beam Telescopes and Test Beams Workshop (BTTB) in Zurich, Switzerland. The BTTB workshop aims at bringing together the community involved in beam tests. It therefore offers a suitable platform to induce community-wide discussions. The forum and its discussions were well received and the participants concluded that appropriate actions should be undertaken promptly. Specific hardware and software proposals were discussed, with an emphasis on improving current common EUDET-type telescopes based on Mimosa26 sensors towards higher trigger rate capabilities in convolution with considerably improved time resolution. EUDAQ as a common top level DAQ and its modular structure is ready for future hardware. EUTelescope fulfils many requirements of a common reconstruction framework, but has also various drawbacks. Thus, requirements for a new common reconstruction framework were collected. A new common beam telescope evolves with the sensor decision and the whole package including a reconstruction framework depends on that decision.

physics.ins-det↗

arXiv2016

Performance of the EUDET-type beam telescopes

Test beam measurements at the test beam facilities of DESY have been conducted to characterise the performance of the EUDET-type beam telescopes originally developed within the EUDET project. The beam telescopes are equipped with six sensor planes using MIMOSA26 monolithic active pixel devices. A programmable Trigger Logic Unit provides trigger logic and time stamp information on particle passage. Both data acquisition framework and offline reconstruction software packages are available. User devices are easily integrable into the data acquisition framework via predefined interfaces. The biased residual distribution is studied as a function of the beam energy, plane spacing and sensor threshold. Its standard deviation at the two centre pixel planes using all six planes for tracking in a 6\,GeV electron/positron-beam is measured to be $(2.88\,\pm\,0.08)\,\upmu\meter$.Iterative track fits using the formalism of General Broken Lines are performed to estimate the intrinsic resolution of the individual pixel planes. The mean intrinsic resolution over the six sensors used is found to be $(3.24\,\pm\,0.09)\,\upmu\meter$.With a 5\,GeV electron/positron beam, the track resolution halfway between the two inner pixel planes using an equidistant plane spacing of 20\,mm is estimated to $(1.83\,\pm\,0.03)\,\upmu\meter$ assuming the measured intrinsic resolution. Towards lower beam energies the track resolution deteriorates due to increasing multiple scattering. Threshold studies show an optimal working point of the MIMOSA26 sensors at a sensor threshold of between five and six times their RMS noise. Measurements at different plane spacings are used to calibrate the amount of multiple scattering in the material traversed and allow for corrections to the predicted angular scattering for electron beams.

physics.ins-det↗