arXiv subjects

H. K. Eriksen

Publications and source records attributed to H. K. Eriksen.

At least 19 recordsLinked to original sources

arXiv2026

LiteBIRD Mission Overview after Mission Reformation

LiteBIRD is a JAXA-led space mission designed to produce all-sky microwave polarization maps. Its primary science goal is to test representative inflationary models by measuring the cosmic microwave background $B$-mode polarization generated by primordial gravitational waves, while also providing new insights into cosmology, particle physics, and astrophysics. The mission concept has been updated following the reformation activities initiated after the Mission Definition Review in 2024. The current concept preserves the central scientific objectives, while simplifying the payload configuration: a single telescope covers 12 frequency bands with band centers spanning 40 to 402~GHz, corresponding to an optical coverage of 34--448~GHz. The telescope is a cross-Dragone reflector with a 500~mm aperture diameter, cooled to approximately 5~K and coupled to transition-edge-sensor bolometer arrays operated at 0.1~K. LiteBIRD will observe from a Lissajous orbit around the Sun--Earth L2 point during a nominal 3-year survey. More specifically, the primary scientific objective is to achieve total uncertainty in the tensor-to-scalar ratio of $δr < 0.002$ (68\% C.L.), including contributions from foreground residuals, statistical uncertainties, instrumental systematics, and margin contingency. The corresponding map-noise requirements are specified separately for the low-, mid-, and high-frequency ranges over the reionization and recombination multipole ranges. This sensitivity makes LiteBIRD unique not only for inflationary science but also for a broad range of scientific investigations probing the history of both the early and late Universe, as well as for astrophysical processes, including Galactic science. This paper summarizes the scientific objectives, updated payload and instrument concepts, observation strategy, and ground segment plans.

astro-ph.IM↗

arXiv2026

Galactic Science with the LiteBIRD satellite: Spectral characterization of diffuse Galactic polarized emission at the angular power spectrum level

Detection of primordial $B$-mode polarization in the cosmic microwave background (CMB) from tensor perturbations generated during inflation is a major scientific goal of future CMB missions. Its success will strongly depend on the characterization of polarized foregrounds, a challenge that the LiteBIRD satellite aims to tackle with its 15 frequency bands ranging from 40 to 402 GHz. In this work, we forecast the ability of LiteBIRD to characterize polarized dust and synchrotron emission in the diffuse interstellar medium (ISM), at the angular power spectrum level. From simulated LiteBIRD intensity and polarization maps with different foreground complexities, we compute cross-frequency angular power spectra and fit them to dust and synchrotron spectral energy distributions, which are modeled by a modified black body and a power law, respectively. We find that LiteBIRD will be able to measure the dust temperature, dust and synchrotron spectral indices and spatial correlation with dispersions as low as $σ(T_{\rm d})\sim0.2$ K, $σ(β_{\rm d})\sim0.006$, $σ(β_{\rm s})\sim0.04$ and $σ(ρ)\sim10^{-2}$, as well as to detect and quantify deviations from the proposed parametric model due to variations of the emission properties in the three dimensions of our Galaxy. Additionally, LiteBIRD is likely to rule out the power-law model of polarized foreground angular power spectra suggested by Planck data. It will also be able to detect differences in the values of $β_{\rm d}$, $T_{\rm d}$, and $β_{\rm s}$ between $E$ modes, $B$ modes, and intensity in the diffuse ISM for the first time, highlighting the joint variations of the physical conditions and the magnetic field structure across the Galaxy. We conclude that in addition to detailed studies of CMB polarization, LiteBIRD will open a new window onto the physical conditions governing the ISM of the Milky Way.

astro-ph.GA↗

arXiv2026

A cross-calibration approach for polarisation-sensitive detectors in CMB experiments: application to LiteBIRD's polarisation angle calibration

One of the current challenges in observational cosmology is obtaining high-precision polarisation maps of the CMB to measure primordial $B$-modes and constrain the tensor-to-scalar ratio ($r$). The weakness of this signal compared to foregrounds and $E$-to-$B$ leakage makes this task particularly challenging, requiring large detector arrays operating at multiple frequencies and extremely precise calibration. We present a cross-calibration algorithm to determine relative calibration of detectors within the same frequency band of a CMB experiment. The method iteratively compares single-detector maps with band-averaged maps and can be applied to any calibration parameter that can be observed and corrected at the map level, relaxing pre-flight calibration requirements and enabling post-processing validation. We validate the pipeline by calibrating the polarisation angle of simulated LiteBIRD observations, including both random detector miscalibration and wafer-level rotations. The algorithm converges to correct values with arcminute precision. Finally, we propagate residual calibration uncertainties through component separation and tensor-to-scalar ratio estimation pipelines using both parametric (FgBuster) and blind (HILC) methods. The induced bias on $r$ remains well below the LiteBIRD systematics budget of $δr < 6.5\times10^{-6}$, demonstrating that the method is suitable for next-generation CMB experiments.

astro-ph.CO↗

arXiv2026

Mitigating half-wave plate systematics at the map-making level: calibration requirements for LiteBIRD

Although half-wave plates (HWPs) are becoming a popular choice of polarization modulators for cosmic microwave background (CMB) experiments, their non-idealities can introduce systematic effects that should be carefully characterized and mitigated. One possible mitigation strategy is to incorporate information about the non-idealities at the map-making level, which helps to reduce the HWP-induced distortions of the reconstructed CMB. Nevertheless, the non-idealities can only be known with finite precision. In this paper we investigate the consequences of discrepancies between their true frequency profiles and those assumed by the map-maker. We present an end-to-end framework, including a blind component-separation step, and use it to translate these discrepancies into a bias on the tensor-to-scalar ratio, $r$, for the LiteBIRD satellite mission. We subsequently derive realistic and conservative measurement requirements for accurately characterizing the HWP non-idealities to ensure they do not compromise LiteBIRD's ambitious scientific goals. We find that the obtained results are robust against sky models with varying complexity.

astro-ph.CO↗

arXiv2026

Cosmoglobe DR2. III. Improved modelling of zodiacal light with COBE-DIRBE through global Bayesian analysis

We present an improved zodiacal light (ZL) model for COBE-DIRBE derived through global Bayesian analysis within the Cosmoglobe Data Release 2 framework. The parametric form of the ZL model is inspired by the original DIRBE model by Kelsall et al. (K98), but the specific best-fit parameter values are re-derived using the combination of DIRBE Calibrated Individual Observations, Planck HFI sky maps, and WISE and Gaia compact object catalogs. Furthermore, the ZL parameters are fitted jointly with astrophysical parameters, such as thermal dust and starlight emission, and the new model takes into account excess radiation that appears stationary in solar-centric coordinates as reported in a companion paper. The relative differences between the predicted signals from K98 and our new model are $\lesssim 3\%$ in the 12 and 25 $μ$m channels over the full sky. The zero-levels of the cleaned DR2 maps are lower than those of the K98 ZL Subtracted Mission Average maps by $\sim 30$ kJy/sr at 1.25--3.5 $μ$m, which is larger than the entire predicted contribution from high-redshift galaxies to the Cosmic Infrared Background at the same wavelengths. At high Galactic latitudes, the total RMS of each DR2 map is lower than the corresponding DIRBE ZSMA map of $\sim$ 80 \% at wavelengths 4.9--25 $μ\mathrm{m}$. Still, obvious ZL residuals can be seen in several of the DR2 maps, and further work is required to mitigate these. Joint analysis with high-resolution full-sky surveys such as AKARI, IRAS, Planck HFI, and SPHEREx will be essential both to break key degeneracies in the current model and to determine whether the reported solar-centric excess radiation has a ZL or instrumental origin. Thus, while the results presented in this paper do redefine the state-of-the-art for DIRBE modelling, it also only represents the first among many steps toward a future optimal Bayesian ZL model. (abridged)

astro-ph.CO↗

arXiv2026

Cosmoglobe DR2. VI. Disentangling hot and cold thermal dust emission with Planck HFI

We present a four-component high-resolution model of thermal dust emission for microwave and sub-mm frequencies derived from Planck HFI, WHAM and Gaia. The resulting high-resolution model derived here forms the basis for the thermal dust model employed in the Cosmoglobe DR2 reanalysis of COBE-DIRBE. The four dust components are called ``cold dust'', ``hot dust'', ``nearby dust'', and ``Ha correlated dust'', respectively, and trace different physical environments. The spatial distributions of the nearby dust and Ha dust components are defined by the Edenhofer et al. Gaia 3D extinction model and the WHAM survey, respectively, while the hot and cold dust components are fit freely pixel-by-pixel to the Planck HFI data. We use a global parameter grid search coupled to an amplitude map Gibbs sampler to fit this model to Planck HFI data. In agreement with the companion low-resolution analysis, we find that the hot dust component is strongly correlated with the FIRAS Cii map, while the cold dust component is strongly correlated with the HI4PI Hi map. Despite its fewer degrees of freedom per pixel compared to the Planck 2015 legacy dust model, we find that this new model performs competitively in terms of overall residuals, capturing over 98% of the full-sky dust variance for all channels. When fitting a spatially varying 3-parameter MBB model to the new dust model with isotropic SEDs, we find very similar spatial distributions to those of the official Planck analysis, and this new model thus represents an economical decomposition of previously published spatially varying spectral parameter maps. We conclude that this new model represents both a statistically more efficient summary of thermal dust in the microwave and far-infrared regimes and a physically more realistic decomposition of the sky compared to the traditional 3-parameter MBB model. (abridged)

astro-ph.CO↗

arXiv2026

Cosmoglobe DR2. V. Spatial correlations between thermal dust and ionized carbon emission in Planck HFI and COBE-DIRBE

We fit five tracers of thermal dust emission to ten Planck HFI and COBE-DIRBE frequency maps between 353 GHz and 25 THz, aiming to map the relative importance of each physical host environment as a function of frequency and position on the sky. Four of these correspond to classic thermal dust tracers, namely H i (HI4PI), CO (Dame et al. 2001a), Hα (WHAM, Haffner et al. (2003a, 2016)), and dust extinction (Gaia; Edenhofer et al. 2024), while the fifth is ionized carbon (C ii) emission as observed by COBE- FIRAS. We jointly fit these five templates to each frequency channel through standard multi-variate linear regression. At frequencies higher than 1 THz, we find that the dominant tracer is in fact C ii, and above 10 THz this component accounts for almost the entire fitted signal; at frequencies below 1 THz, its importance is second only to H i. We further find that all five components are well described by a modified blackbody spectral energy density (SED) up to some component-dependent maximum frequency ranging between 1 and 5 THz. In this interpretation, the C ii-correlated component is the hottest among all five, with an effective temperature of about 25 K. The Hα component has a temperature of 18 K, and, unlike the other four, is observed in absorption rather than emission. Despite the simplicity of this model, which relies only on external templates coupled to spatially isotropic SEDs, we find that it captures 98 % of the full signal root mean squared (RMS) below 1 THz. This high efficiency suggests that spatial variations in the thermal dust SED, as for instance reported by Planck and other experiments, may be more economically modelled on large angular scales in terms of a spatial mixing of individually isotropic physical components.

astro-ph.CO↗

arXiv2026

Cosmoglobe DR2. VII. Towards a concordance model of large-scale thermal dust emission for microwave and infrared frequencies

We fit a four-component thermal dust model to COBE-DIRBE data between 3.5 and 240 micron within the global Bayesian end-to-end Cosmoglobe DR2 reanalysis. Following a companion analysis of Planck HFI, the four components of this model correspond to "hot dust", "cold dust", "nearby dust", and "Halpha correlated dust", respectively, and each component is modelled in terms of a fixed spatial template and a spatially isotropic spectral energy density (SED) defined by an overall free amplitude for each DIRBE channel. Except for the cold dust amplitude, which is only robustly detected in the 240 micron channel, we measure statistically significant template amplitudes for all components in all DIRBE channels between 12 and 240 micron. In the 3.5 and 4.9 micron channels, only the hot component is detected, while the 1.25 and 2.2 micron channels are too dominated by starlight emission to allow robust dust detections. The total number of DIRBE-specific degrees of freedom in this model is 25. Despite this low dimensionality, the resulting total SED agrees well with recent astrodust predictions. At both low and high frequencies, more than 95 % of the frequency map variance is captured by the model, while at 60 and 100 micron about 70 % of the signal variance is successfully accounted for. The hot dust component, which in a companion paper has been found to correlate strongly with C ii emission, has the highest absolute amplitude in all DIRBE frequency channels; in particular, at 3.5 micron, which is known to be dominated by polycyclic aromatic hydrocarbon emission, this component accounts for at least 80 % of the total signal. This analysis represents an important step towards establishing a joint concordance model of thermal dust emission applicable to both the microwave and infrared regimes.

astro-ph.CO↗

arXiv2026

Cosmoglobe DR2. IV. Modelling starlight in DIRBE with Gaia and WISE

We present a model of starlight emission in the Diffuse Infrared Background Explorer (DIRBE) data between 1.25 and 25$\,μ$m based on \textit{Gaia} and WISE measurements. We include two classes of compact objects, namely bright stars with individual spectral energy densities (SEDs) measured by \textit{Gaia}, and a combined diffuse background of dim point source emission. Of the 424\ 829 bright sources that we fit, the number of stars with a flux density detected by WISE at Galactic latitudes $|b|>20^{\circ}$ at more than $5\,σ$ is 94\,680, for an average of 1.36~stars per DIRBE beam area. For each star, we adopt physical parameters ($T_{\mathrm{eff}}$, $\log g$, and [M/H]) from \textit{Gaia}; use these to identify a best-fit effective SED with the PHOENIX stellar model library; convolve with the respective DIRBE bandpass; and fit an overall free amplitude per star within the Bayesian end-to-end \texttt{Cosmoglobe} DR2 framework. The contributions from faint sources are accounted for by coadding all 710\ 825\ 587 WISE sources not included as bright stars, and fit one single overall amplitude per DIRBE band. Based on this model we find that total star emission accounts for 91\,\% of the observed flux density at 2.2\,$μ$m; 54\,\% at 4.9$\,μ$m; and 1\,\% at 25\,$μ$m. As shown in companion papers, this new model is sufficiently accurate to support high-precision measurements of both the Cosmic Infrared Background monopole and zodiacal light emission in the three highest DIRBE frequencies.

astro-ph.CO↗

arXiv2025

On the computational feasibility of Bayesian end-to-end analysis of LiteBIRD simulations within Cosmoglobe

We assess the computational feasibility of end-to-end Bayesian analysis of the JAXA-led LiteBIRD experiment by analysing simulated time ordered data (TOD) for a subset of detectors through the Cosmoglobe and Commander3 framework. The data volume for the simulated TOD is 1.55 TB, or 470 GB after Huffman compression. From this we estimate a total data volume of 238 TB for the full three year mission, or 70 TB after Huffman compression. We further estimate the running time for one Gibbs sample, from TOD to cosmological parameters, to be approximately 3000 CPU hours. The current simulations are based on an ideal instrument model, only including correlated 1/f noise. Future work will consider realistic systematics with full end-to-end error propagation. We conclude that these requirements are well within capabilities of future high-performance computing systems.

astro-ph.IM↗

arXiv2025

LiteBIRD science goals and forecasts: improved full-sky reconstruction of the gravitational lensing potential through the combination of Planck and LiteBIRD data

Cosmic microwave background (CMB) photons are deflected by large-scale structure through gravitational lensing. This secondary effect introduces higher-order correlations in CMB anisotropies, which are used to reconstruct lensing deflections. This allows mapping of the integrated matter distribution along the line of sight, probing the growth of structure, and recovering an undistorted view of the last-scattering surface. Gravitational lensing has been measured by previous CMB experiments, with $\textit{Planck}$'s $42\,σ$ detection being the current best full-sky lensing map. We present an enhanced $\textit{LiteBIRD}$ lensing map by extending the CMB multipole range and including the minimum-variance estimation, leading to a $49$ to $58\,σ$ detection over $80\,\%$ of the sky, depending on the final complexity of polarized Galactic emission. The combination of $\textit{Planck}$ and $\textit{LiteBIRD}$ will be the best full-sky lensing map in the 2030s, providing a $72$ to $78\,σ$ detection over $80\,\%$ of the sky, almost doubling $\textit{Planck}$'s sensitivity. Finally, we explore different applications of the lensing map, including cosmological parameter estimation using a lensing-only likelihood and internal delensing, showing that the combination of both experiments leads to improved constraints. The combination of $\textit{Planck}$ + $\textit{LiteBIRD}$ will improve the $S_8$ constraint by a factor of 2 compared to $\textit{Planck}$, and $\textit{Planck}$ + $\textit{LiteBIRD}$ internal delensing will improve $\textit{LiteBIRD}$'s tensor-to-scalar ratio constraint by $6\,\%$. We have tested the robustness of our results against foreground models of different complexity, showing that improvements remains even for the most complex foregrounds.

astro-ph.CO↗

arXiv2025

First release of LiteBIRD simulations from an end-to-end pipeline

The LiteBIRD satellite mission aims at detecting Cosmic Microwave Background $B$ modes with unprecedented precision, targeting a total error on the tensor-to-scalar ratio $r$ of $δr \sim 0.001$. Operating from the L2 Lagrangian point of the Sun-Earth system, LiteBIRD will survey the full sky across 15 frequency bands (34 to 448 GHz) for 3 years.The current LiteBIRD baseline configuration employs 4508 detectors sampling at 19.1 Hz to achieve an effective polarization sensitivity of $ 2 μ\mathrm{K-arcmin}$ and an angular resolution of 31 arcmin (at 140 GHz).We describe the first release of the official LiteBIRD simulations, realized with a new simulation pipeline developed using the LiteBIRD Simulation Framework, see https://github.com/litebird/litebird_sim . This pipeline generates 500 full-sky simulated maps at a Healpix resolution of nside=512. The simulations include also one year of Time Ordered Data for approximately one-third of LiteBIRD's total detectors.

astro-ph.IM↗

arXiv2025

COMAP Pathfinder -- Season 2 results IV. A stack on eBOSS/DESI quasars

We present a stack of data from the second season of the CO Mapping Array Project (COMAP) Pathfinder on the positions of quasars from eBOSS and DESI. COMAP is a Line Intensity Mapping (LIM) experiment targeting dense molecular gas via CO(1--0) emission at $z\sim3$. COMAP's Season 2 represents a $3\times$ increase in map-level sensitivity over the previous Early Science data release. We do not detect any CO emission in the stack, instead finding an upper limit of $10.0\times 10^{10}\ \mathrm{K\ km\ s^{-1}\ pc^2}$ at 95\% confidence within an $\sim 18\ \mathrm{cMpc}$ box. We compare this upper limit to models of the CO emission stacked on quasars and find a tentative ($\sim 3 σ$) tension between the limit and the brightest stack models after accounting for a suite of additional sources of experimental attenuation and uncertainty, including quasar velocity uncertainty, pipeline signal loss, cosmic variance, and interloper emission in the LIM data. The COMAP-eBOSS/DESI stack is primarily a measurement of the CO luminosity in the quasars' wider environment and is therefore potentially subject to environmental effects such as feedback. With our current simple models of the galaxy-halo connection, we are thus unable to confidently rule out any models of cosmic CO with the stack alone. Conversely, the stack's sensitivity to these large-scale environmental effects has the potential to make it a powerful tool for galaxy formation science, once we are able to constrain the average CO luminosity via the auto power spectrum (a key goal of COMAP).

astro-ph.CO↗

arXiv2025

N+2 Mapmaking for Polarized CMB Experiments

We introduce N+2 mapmaking as a novel approach to constructing maps in both intensity and polarization for multi-detector CMB data. The motivation behind this method is two-fold: Firstly, it provides individual temperature detector maps from a multi-detector set, which may be useful for component separation purposes, in particular for line emission reconstruction. Secondly, it simultaneously outputs coadded polarization maps with minimal temperature-to-polarization leakage sensitivity. Algorithmically speaking, the N+2 mapmaker is closely related to the `spurious mapmaking' algorithm pioneered by the WMAP team, but rather than solving for a spurious S map together with the three normal Stokes IQU parameters, we solve for N temperature maps and two Stokes (Q and U) parameters per pixel. The result is a statistically coherent set of physically meaningful per-detector temperature maps, each with slightly different bandpasses as defined by each detector, combined with coadded polarization maps. We test this approach on Planck Low Frequency Instrument (LFI) 30 GHz data, and find that the Planck scanning strategy is too poorly cross-linked to allow for a clean separation between temperature and polarization. However, noting that pairs of detectors within a single horn are strongly anti-correlated, we anticipate that solving for horn maps, as opposed to individual detector maps, may provide an optimal compromise between noise and temperature-to-polarization leakage minimization. When applied to simulated data with a rotating half-wave plate, for which the polarization angle coverage is greatly improved, the algorithm performs as expected.

astro-ph.IM↗

arXiv2025

A Simulation Framework for the LiteBIRD Instruments

LiteBIRD, the Lite (Light) satellite for the study of $B$-mode polarization and Inflation from cosmic background Radiation Detection, is a space mission focused on primordial cosmology and fundamental physics. In this paper, we present the LiteBIRD Simulation Framework (LBS), a Python package designed for the implementation of pipelines that model the outputs of the data acquisition process from the three instruments on the LiteBIRD spacecraft: LFT (Low-Frequency Telescope), MFT (Mid-Frequency Telescope), and HFT (High-Frequency Telescope). LBS provides several modules to simulate the scanning strategy of the telescopes, the measurement of realistic polarized radiation coming from the sky (including the Cosmic Microwave Background itself, the Solar and Kinematic dipole, and the diffuse foregrounds emitted by the Galaxy), the generation of instrumental noise and the effect of systematic errors, like pointing wobbling, non-idealities in the Half-Wave Plate, et cetera. Additionally, we present the implementation of a simple but complete pipeline that showcases the main features of LBS. We also discuss how we ensured that LBS lets people develop pipelines whose results are accurate and reproducible. A full end-to-end pipeline has been developed using LBS to characterize the scientific performance of the LiteBIRD experiment. This pipeline and the results of the first simulation run are presented in Puglisi et al. (2025).

astro-ph.IM↗

arXiv2025

LiteBIRD Science Goals and Forecasts. $E$-mode Anomalies

Various so-called anomalies have been found in both the WMAP and Planck cosmic microwave background (CMB) temperature data that exert a mild tension against the highly successful best-fit 6 parameter cosmological model, potentially providing hints of new physics to be explored. That these are real features on the sky is uncontested. However, given their modest significance, whether they are indicative of true departures from the standard cosmology or simply statistical excursions, due to a mildly unusual configuration of temperature anisotropies on the sky which we refer to as the "fluke hypothesis", cannot be addressed further without new information. No theoretical model of primordial perturbations has to date been constructed that can explain all of the temperature anomalies. Therefore, we focus in this paper on testing the fluke hypothesis, based on the partial correlation between the temperature and $E$-mode CMB polarisation signal. In particular, we compare the properties of specific statistics in polarisation, built from unconstrained realisations of the $Λ$CDM cosmological model as might be observed by the LiteBIRD satellite, with those determined from constrained simulations, where the part of the $E$-mode anisotropy correlated with temperature is constrained by observations of the latter. Specifically, we use inpainted Planck 2018 SMICA temperature data to constrain the $E$-mode realisations. Subsequent analysis makes use of masks defined to minimise the impact of the inpainting procedure on the $E$-mode map statistics. We find that statistical assessments of the $E$-mode data alone do not provide any evidence for or against the fluke hypothesis. However, tests based on cross-statistical measures determined from temperature and $E$ modes can allow this hypothesis to be rejected with a moderate level of probability.

astro-ph.CO↗

arXiv2025

In-Flight Performance of Spider's 280 GHz Receivers

SPIDER is a balloon-borne instrument designed to map the cosmic microwave background at degree-angular scales in the presence of Galactic foregrounds. SPIDER has mapped a large sky area in the Southern Hemisphere using more than 2000 transition-edge sensors (TESs) during two NASA Long Duration Balloon flights above the Antarctic continent. During its first flight in January 2015, SPIDER observed in the 95 GHz and 150 GHz frequency bands, setting constraints on the B-mode signature of primordial gravitational waves. Its second flight in the 2022-2023 season added new receivers at 280 GHz, each using an array of TESs coupled to the sky through feedhorns formed from stacks of silicon wafers. These receivers are optimized to produce deep maps of polarized Galactic dust emission over a large sky area, providing a unique data set with lasting value to the field. We describe the instrument's performance during SPIDER's second flight, focusing on the performance of the 280 GHz receivers. We include details on the flight, in-band optical loading at float, and an early analysis of detector noise.

astro-ph.IM↗

arXiv2025

LiteBIRD Science Goals and Forecasts: constraining isotropic cosmic birefringence

Cosmic birefringence (CB) is the rotation of the photons' linear polarisation plane during propagation. Such an effect is a tracer of parity-violating extensions of standard electromagnetism and would probe the existence of a new cosmological field acting as dark matter or dark energy. It has become customary to employ cosmic microwave background (CMB) polarised data to probe such a phenomenon. Recent analyses on Planck and WMAP data provide a hint of detection of the isotropic CB angle with an amplitude of around $0.3^\circ$ at the level of $2.4$ to $3.6σ$. In this work, we explore the LiteBIRD capabilities in constraining such an effect, accounting for the impact of the more relevant systematic effects, namely foreground emission and instrumental polarisation angles. We build five semi-independent pipelines and test these against four different simulation sets with increasing complexity in terms of non-idealities. All the pipelines are shown to be robust and capable of returning the expected values of the CB angle within statistical fluctuations for all the cases considered. We find that the uncertainties in the CB estimates increase with more complex simulations. However, the trend is less pronounced for pipelines that account for the instrumental polarisation angles. For the most complex case analysed, we find that LiteBIRD will be able to detect a CB angle of $0.3^\circ$ with a statistical significance ranging from $5$ to $13 \, σ$, depending on the pipeline employed, where the latter uncertainty corresponds to a total error budget of the order of $0.02^\circ$.

astro-ph.CO↗