arXiv subjects

H. Nomura

Publications and source records attributed to H. Nomura.

At least 19 recordsLinked to original sources

arXiv2026

FAUST XXXI. Grain properties and variability of three sources in GSS 30

To advance our understanding of dust properties in class 0/I young stellar objects, it is crucial to resolve their structures at multiple wavelengths and investigate how grain growth and environmental effects shape their spectral properties. We present 0.5 arcsec resolution ALMA observations of the GSS 30 complex at 1.2-3.0 mm from the FAUST large programme, achieving a linear resolution of 69 au. We analyse the dust continuum emission and perform modelling to constrain dust properties and disk structures. For IRS3, the spectral index increases radially from 2.0 at the centre to 2.5 at the disk edge, while decreasing to 1.6-1.8 along the outflow direction. The asymmetric low-alpha region towards the northeastern blueshifted lobe may result from cold outer envelope dust obscuring warmer inner regions. SED fitting suggests maximum grain sizes of tens of microns and a dust mass of 650-1510 M_earth. IRS1 is associated with an extended north-eastern structure, which may represent an outflow-disk complex, a trailing structure linked to a circumbinary disk, or a gas streamer accreting onto IRS1. The central IRS1 shows alpha < 0.8, consistent with marginally optically thick free-free emission. IRS2 displays brightness variations over 420 s, and multi-epoch comparison suggests a flare lasting tens of minutes, likely caused by magnetic activity in the protostar. Our results highlight the importance of environmental effects, including dust obscuration and streamer structures, in shaping the observed properties of young disks, and reveal millimetre variability associated with possible protostellar magnetic flares.

astro-ph.SR↗

arXiv2026

Ortho-Para Chemistry of H2CO in the Protoplanetary Disk TW Hya

The spatial distribution of the chemical reservoirs in protoplanetary disks is key to elucidate the composition of planets, especially habitable ones. However, the partitioning of the main elements among the refractory and volatile phases is still elusive. Key parameters such as the carbon-to-oxygen C/O elemental ratio and the ionization fraction remain poorly constrained, with the latter potentially orders of magnitude lower than in the interstellar medium. Moreover, the thermal structure of the gas is also poorly known, despite its deep influence on gas-phase chemistry. In this context, ortho-to-para ratios could provide selective and sensitive probes. Recent ALMA observations have measured the spatially resolved column density of ortho-and para-H2CO in the transition disk orbiting TW Hya and derived the radial profile of the ortho-to-para ratio. Yet, current disk models do not include the nuclear-spin-resolved chemistry required to interpret these observations. The present work aims to fill this gap, by combining a parametric disk physical model of TW Hya with the UGAN network, updated to include a comprehensive description of the nuclear-spin-resolved chemistry of formaldehyde. This new model reproduces the observed column density of H2CO to within a factor of 2, as well as the measured ortho-to-para ratio which varies from 1.5 in the outer disk to 3 inside 90au. In particular the low value of this ratio beyond 90au is well explained by our model. However, the statistical value of 3 measured below 70au cannot be reproduced, suggesting that additional processes involving ices may be involved. Our parameter space exploration shows that the abundance of H2CO is highly sensitive to the C/O elemental ratio and to the cosmic-ray ionization rate. Future observations of ortho-and para-H2CO, based on well selected rotational transitions, in a large sample of disks, appear highly desirable.

astro-ph.EP↗

arXiv2025

Edge-On Disk Study (EODS) III: Molecular Stratification in the Flying Saucer Disk

Context: Investigating the vertical distribution of molecular content in protoplanetary disks remains difficult in most disks mildly inclined along the line of sight. In contrast, edge-on disks provide a direct (tomographic) view of the 2D molecular brightness. Aims: We study the radial and vertical molecular distribution as well as the gas temperature and density by observing the Keplerian edge-on disk surrounding the Flying Saucer, a Class II object located in Ophiuchus. Methods: We use new and archival ALMA data to perform a tomography of $^{12}$CO, $^{13}$CO, C$^{18}$O, CN, HCN, CS, H$_2$CO, c-C$_3$H$_2$, N$_2$D$^+$, DCN and $^{13}$CS. We analyze molecular tomographies and model data using the radiative transfer code DiskFit. Results: We directly measure the altitude above the mid-plane for each observed species. For the first time, we unambiguously demonstrate the presence of a common molecular layer and measure its thickness: most molecules are located at the same altitude versus radius. Beyond CO, as predicted by chemical models, the CN emission traces the upper boundary of the molecular layer, whereas the deuterated species (DCN and N2D+) resides below one scale-height. Our best fits from DiskFit show that most observed transitions in the molecular layer are thermalized because their excitation temperature is the same, around 17-20 K. Conclusions: These long-integration observations clearly reveal a molecular layer predominantly located around 1-2 scale height, at a temperature above the CO freeze-out temperature. The deuterated molecules are closer to the mid-plane and N2D+ may be a good proxy for the CO snowline. Some molecules, such as CN and H2CO, are likely influenced by the disk environment, at least beyond the mm dust disk radius. The direct observation of the molecular stratification opens the door to detailed chemical modeling in this disk which appears representative of T Tauri disks.

astro-ph.EP↗

arXiv2025

Edge-On Disk Study (EODS) II: Thermal Structure of the Flying Saucer Disk

Context. The dust and gas temperature in proto-planetary disks play critical roles in determining their chemical evolution and influencing planet formation processes. Aims. We attempted an accurate measurement of the dust and CO temperature profile in the edge-on disk of the Flying Saucer. Methods. We used the unique properties of the Flying Saucer, its edge-on geometry and its fortunate position in front of CO clouds with different brightness temperatures to provide independent constraints on the dust temperature. We compared it with the dust temperature derived using the radiative transfer code DiskFit and the CO gas temperature. Results. We find clear evidence for a substantial gas temperature vertical gradient, with a cold (10 K) disk mid-plane and a warmer CO layer where T(r) is 27 K at 100 au, dropping with exponent 0.3. Direct evidence for CO depletion in the mid-plane, below about 1 scale height, is also found. At this height, the gas temperature is 15-20 K, consistent with the expected CO freeze out temperature. The dust disk appears optically thin at 345 GHz, and exhibits moderate settling.

astro-ph.EP↗

arXiv2025

High-Throughput Mapping of Magnetic Properties via the on-the-fly XMCD spectroscopy in a Combinatorial Fe-Co-Ni Film

High-throughput X-ray magnetic circular dichroism (XMCD) spectroscopy was conducted on Fe-Co-Ni compositionally graded films to systematically analyze the variation of magnetic properties as a function of composition. On-the-fly XMCD measurement enabled rapid spectral acquisition. Measurement time was reduced approximately tenfold compared to conventional stepwise methods, while maintaining high precision. The obtained XMCD spectra were processed using the Savitzky-Golay denoising technique, and element-specific magnetic properties were extracted using XMCD sum rules. By mapping the orbital and spin magnetic moments across the composition gradient, we identified key regions exhibiting enhanced soft magnetic properties. This study demonstrates the effectiveness of high-throughput synchrotron-based spectroscopy for accelerating materials discovery and optimizing functional magnetic materials.

cond-mat.mtrl-sci↗

arXiv2025

Simulation study on Conservative Join (C-join) in Skyrmion Brownian circuit

Magnetic skyrmions, which exhibit Brownian motion in solid-state systems, are promising candidates as signal carriers for Brownian computing. However, successfully implementing such systems requires two critical components: a Hub to connect multiple wires and a C-join to synchronize the skyrmion signal carriers. While the former has been successfully addressed, the latter remains a significant challenge. In this study, we propose a novel solution by decomposing the C-join into two sub-circuits, the Join and Fork, and validate their functionality using a particle simulation approach. Our results demonstrate that the C-join can effectively synchronize skyrmion signals within 6.8μs with a 99.9% success rate at low temperatures. Additionally, we construct the Half-adder in a crossing-free architecture utilizing the C-join circuits. These findings pave the way for the realization of skyrmion-based Brownian computing systems.

cond-mat.mes-hall↗

arXiv2024

FAUST XVII: Super deuteration in the planet forming system IRS 63 where the streamer strikes the disk

Recent observations suggest that planets formation starts early, in protostellar disks of $\le10^5$ yrs, which are characterized by strong interactions with the environment, e.g., through accretion streamers and molecular outflows. To investigate the impact of such phenomena on disk physical and chemical properties it is key to understand what chemistry planets inherit from their natal environment. In the context of the ALMA Large Program Fifty AU STudy of the chemistry in the disk/envelope system of Solar-like protostars (FAUST), we present observations on scales from ~1500 au to ~60 au of H$_2$CO, HDCO, and D$_2$CO towards the young planet-forming disk IRS~63. H$_2$CO probes the gas in the disk as well as in a large scale streamer (~1500 au) impacting onto the South-East (SE) disk side. We detect for the first time deuterated formaldehyde, HDCO and D$_2$CO, in a planet-forming disk, and HDCO in the streamer that is feeding it. This allows us to estimate the deuterium fractionation of H$_2$CO in the disk: [HDCO]/[H$_2$CO]$\sim0.1-0.3$ and [D$_2$CO]/[H$_2$CO]$\sim0.1$. Interestingly, while HDCO follows the H$_2$CO distribution in the disk and in the streamer, the distribution of D$_2$CO is highly asymmetric, with a peak of the emission (and [D]/[H] ratio) in the SE disk side, where the streamer crashes onto the disk. In addition, D$_2$CO is detected in two spots along the blue- and red-shifted outflow. This suggests that: (i) in the disk, HDCO formation is dominated by gas-phase reactions similarly to H$_2$CO, while (ii) D$_2$CO was mainly formed on the grain mantles during the prestellar phase and/or in the disk itself, and is at present released in the gas-phase in the shocks driven by the streamer and the outflow. These findings testify on the key role of streamers in the build-up of the disk both concerning the final mass available for planet formation and its chemical composition.

astro-ph.EP↗

arXiv2024

FAUST XIII. Dusty cavity and molecular shock driven by IRS7B in the Corona Australis cluster

The origin of the chemical diversity observed around low-mass protostars probably resides in the earliest history of these systems. We aim to investigate the impact of protostellar feedback on the chemistry and grain growth in the circumstellar medium of multiple stellar systems. In the context of the ALMA Large Program FAUST, we present high-resolution (50 au) observations of CH$_3$OH, H$_2$CO, and SiO and continuum emission at 1.3 mm and 3 mm towards the Corona Australis star cluster. Methanol emission reveals an arc-like structure at $\sim$1800 au from the protostellar system IRS7B along the direction perpendicular to the major axis of the disc. The arc is located at the edge of two elongated continuum structures that define a cone emerging from IRS7B. The region inside the cone is probed by H$_2$CO, while the eastern wall of the arc shows bright emission in SiO, a typical shock tracer. Taking into account the association with a previously detected radio jet imaged with JVLA at 6 cm, the molecular arc reveals for the first time a bow shock driven by IRS7B and a two-sided dust cavity opened by the mass-loss process. For each cavity wall, we derive an average H$_2$ column density of $\sim$7$\times$10$^{21}$ cm$^{-2}$, a mass of $\sim$9$\times$10$^{-3}$ M$_\odot$, and a lower limit on the dust spectral index of $1.4$. These observations provide the first evidence of a shock and a conical dust cavity opened by the jet driven by IRS7B, with important implications for the chemical enrichment and grain growth in the envelope of Solar System analogues.

astro-ph.GA↗

arXiv2022

Hot methanol in the [BHB2007] 11 protobinary system: hot corino versus shock origin? : FAUST V

Methanol is a ubiquitous species commonly found in the molecular interstellar medium. It is also a crucial seed species for the building-up of the chemical complexity in star forming regions. Thus, understanding how its abundance evolves during the star formation process and whether it enriches the emerging planetary system is of paramount importance. We used new data from the ALMA Large Program FAUST (Fifty AU STudy of the chemistry in the disk/envelope system of Solar-like protostars) to study the methanol line emission towards the [BHB2007] 11 protobinary system (sources A and B), where a complex structure of filaments connecting the two sources with a larger circumbinary disk has been previously detected. Twelve methanol lines have been detected with upper energies in the range [45-537] K along with one 13CH3OH transition. The methanol emission is compact and encompasses both protostars, separated by only 28 au and presents three velocity components, not spatially resolved by our observations, associated with three different spatial regions, with two of them close to 11B and the third one associated with 11A. A non-LTE radiative transfer analysis of the methanol lines concludes that the gas is hot and dense and highly enriched in methanol with an abundance as high as 1e-5. Using previous continuum data, we show that dust opacity can potentially completely absorb the methanol line emission from the two binary objects. Although we cannot firmly exclude other possibilities, we suggest that the detected hot methanol is resulting from the shocked gas from the incoming filaments streaming towards [BHB2007] 11 A and B, respectively. Higher spatial resolution observations are necessary to confirm this hypothesis.

astro-ph.GA↗

arXiv2022

The Isotopic Links from Planet Forming Regions to the Solar System

Isotopic ratios provide a powerful tool for understanding the origins of materials, including the volatile and refractory matter within solar system bodies. Recent high sensitivity observations of molecular isotopologues, in particular with ALMA, have brought us new information on isotopic ratios of hydrogen, carbon, nitrogen and oxygen in star and planet forming regions as well as the solar system objects. Solar system exploration missions, such as Rosetta and Cassini, have given us further new insights. Meanwhile, the recent development of sophisticated models for isotope chemistry including detailed gas-phase and grain surface reaction network has made it possible to discuss how isotope fractionation in star and planet forming regions is imprinted into the icy mantles of dust grains, preserving a record of the initial isotopic state of solar system materials. This chapter reviews recent progress in observations of molecular isotopologues in extra-solar planet forming regions, prestellar/protostellar cores and protoplanetary disks, as well as objects in our solar system -- comets, meteorites, and planetary/satellite atmospheres -- and discusses their connection by means of isotope chemical models.

astro-ph.EP↗

arXiv2021

The formation of planetary systems with SPICA

In this era of spatially resolved observations of planet forming disks with ALMA and large ground-based telescopes such as the VLT, Keck and Subaru, we still lack statistically relevant information on the quantity and composition of the material that is building the planets, such as the total disk gas mass, the ice content of dust, and the state of water in planetesimals. SPICA is an infrared space mission concept developed jointly by JAXA and ESA to address these questions. The key unique capabilities of SPICA that enable this research are (1) the wide spectral coverage 10-220 micron, (2) the high line detection sensitivity of (1-2) 10-19 W m-2 with R~2000-5000 in the far-IR (SAFARI) and 10-20 W m-2 with R~29000 in the mid-IR (SMI, spectrally resolving line profiles), (3) the high far-IR continuum sensitivity of 0.45 mJy (SAFARI), and (4) the observing efficiency for point source surveys. This paper details how mid- to far-IR infrared spectra will be unique in measuring the gas masses and water/ice content of disks and how these quantities evolve during the planet forming period. These observations will clarify the crucial transition when disks exhaust their primordial gas and further planet formation requires secondary gas produced from planetesimals. The high spectral resolution mid-IR is also unique for determining the location of the snowline dividing the rocky and icy mass reservoirs within the disk and how the divide evolves during the build-up of planetary systems. Infrared spectroscopy (mid- to far-IR) of key solid state bands is crucial for assessing whether extensive radial mixing, which is part of our Solar System history, is a general process occurring in most planetary systems and whether extrasolar planetesimals are similar to our Solar System comets/asteroids. ... (abbreviated)

astro-ph.EP↗

arXiv2020

FAUST I. The hot corino at the heart of the prototypical Class I protostar L1551 IRS5

The study of hot corinos in Solar-like protostars has been so far mostly limited to the Class 0 phase, hampering our understanding of their origin and evolution. In addition, recent evidence suggests that planet formation starts already during Class I phase, which, therefore, represents a crucial step in the future planetary system chemical composition. Hence, the study of hot corinos in Class I protostars has become of paramount importance. Here we report the discovery of a hot corino towards the prototypical Class I protostar L1551 IRS5, obtained within the ALMA Large Program FAUST. We detected several lines from methanol and its isopotologues ($^{13}$CH$_{\rm 3}$OH and CH$_{\rm 2}$DOH), methyl formate and ethanol. Lines are bright toward the north component of the IRS5 binary system, and a possible second hot corino may be associated with the south component. The methanol lines non-LTE analysis constrains the gas temperature ($\sim$100 K), density ($\geq$1.5$\times$10$^{8}$ cm$^{-3}$), and emitting size ($\sim$10 au in radius). All CH$_{\rm 3}$OH and $^{13}$CH$_{\rm 3}$OH lines are optically thick, preventing a reliable measure of the deuteration. The methyl formate and ethanol relative abundances are compatible with those measured in Class 0 hot corinos. Thus, based on the present work, little chemical evolution from Class 0 to I hot corinos occurs.

astro-ph.SR↗

arXiv2020

Early evolution of disk, outflow, and magnetic field of young stellar objects: Impact of dust model

The formation and early evolution of low mass young stellar objects (YSOs) are investigated using three-dimensional non-ideal magneto-hydrodynamics simulations. We investigate the evolution of YSOs up to ~ 10^4 yr after protostar formation, at which protostellar mass reaches ~ 0.1 M_\odot . We particularly focus on the impact of the dust model on the evolution. We found that a circumstellar disk is formed in all simulations regardless of the dust model. Disk size is approximately 10 AU at the protostar formation epoch, and it increases to several tens of AU at ~ 10^4 yr after protostar formation. Disk mass is comparable to central protostellar mass and gravitational instability develops. In the simulations with small dust size, the warp of the pseudodisk develops ~ 10^4 yr after protostar formation. The warp strengthens magnetic braking in the disk and decreases disk size. Ion-neutral drift can occur in the infalling envelope under the conditions that the typical dust size is a \gtrsim 0.2μm and the protostar (plus disk) mass is M \gtrsim 0.1 M_\odot. The outflow activity is anti-correlated to the dust size and the strong outflow appears with small dust grains.

astro-ph.SR↗

arXiv2020

Skyrmion confinement and dynamics in tracks patterned with magnetic anisotropy: theory and simulations

Skyrmion is a topologically protected spin texture excited in magnetic thin films. The radii of skyrmions are typically 10-100 nm. Because of the size, the skyrmion is expected to be a candidate for memory and novel-device usages. To realize the futuristic devices that will be using the skyrmion circuit, the tracks which guide the motion of skyrmions are needed. The tracks patterned with differences in the magnetic-anisotropy energy are well-paved without a potential pocket, whereas the tracks carved out of magnetic films have the potential pockets at corners due to the demagnetizing field. Therefore, the tracks patterned with the magnetic anisotropy plays a key role in making the skyrmion circuits. The experiment along this idea has been conducted for the hub and bent tracks. However, we have little known the motion of skyrmions in these tracks. This work aims to identify the forces acting between skyrmions and walls of the tracks. The static force on a skyrmion can be expressed as minus the gradient of the potential energy caused by the magnetic-anisotropy undulation. The potential can be estimated numerically, modeling the shape of skyrmions with their radii and domain wall widths. We find that the forces depend not only on the distance from the wall but also on the shape of skyrmions. We have also performed micromagnetic simulations where the Magnus force and the acceleration by the magnetic-anisotropy gradient are taken into account as well as the force by the walls. The simulation results show good agreement with those calculated from the modeled skyrmions.

cond-mat.mes-hall↗

arXiv2019

ALMA observations of layered structures due to CO selective dissociation in the $ρ$ Ophiuchi A plane-parallel PDR

We analyze $^{12}$CO($J$=2-1), $^{13}$CO($J$=2-1), C$^{18}$O ($J$=2-1), and 1.3 mm continuum maps of the $ρ$ Ophiuchi A photo-dissociation region (PDR) obtained with ALMA. Layered structures of the three CO isotopologues with an angular separation of 10 arcsec = 6.6$\times$10$^{-3}$ pc = 1400 au are clearly detected around the Be star, S1 (i.e., each front of emission shifts from the near to far side in order of $^{12}$CO, $^{13}$CO, and C$^{18}$O). We estimate the spatial variations of $X$($^{13}$CO)/$X$(C$^{18}$O) abundance ratios, and find that the abundance ratio is as high as 40 near the emission front, and decreases to the typical value in the solar system of 5.5 in a small angular scale of 4 arcsec = 2.6$\times$10$^{-3}$ pc = 560 au. We also find that the $I$($^{12}$CO(2-1))/$I$($^{13}$CO(2-1)) intensity ratio is very high ($>$21) in the flat-spectrum young stellar object, GY-51, located in the PDR. The enhancement of the ratios indicates that the UV radiation significantly affects the CO isotopologues via selective dissociation in the overall $ρ$ Ophiuchi A PDR, and that the $ρ$ Ophiuchi A PDR has a plane-parallel structure.

astro-ph.GA↗

arXiv2018

Shock-Generating Planetesimals Perturbed by a Giant Planet in a Gas Disk

We examined the excitations of planetesimals caused by the resonances of a giant planet in a protoplanetary gas disk. The highly excited planetesimals generate bow shocks, the mechanism of which results in chondrule formation, crystallization of silicate dust, and evaporation of icy planetesimals. The planetesimals beyond 2:1 resonance migrate owing to the gas drag and obtain the maximum eccentricity around 3:1 resonance, which is located at approximately half the planetary distance. The eccentricity depends on the parameters of the planetesimals and the Jovian planet, such as size and location, and gas density of the disk. The maximum relative velocity of a 100-km-sized planetesimal with respect to the gas disk reaches up to ~12 km/s in the case of Jupiter owing to secular resonance, which occurs because of the disk's gravity. We find that if a Jovian mass planet is located within 10 au, the planetesimals larger than 100 km gain sufficient velocity to cause the melting of chondrule precursors and crystallization of the silicate. The maximum velocity is higher for large planetesimals and eccentric planets. Planetesimals are trapped temporarily in the resonances and continue to have high speed over >1 Myr after the formation of a Jovian planet. This duration fits into the timescale of chondrule formation suggested by the isotopic data. The evaporation of icy planetesimals occurs when a Jovian planet is located within 15 au. This mechanism can be a new indicator of planet formation in exosystems if some molecules ejected from icy planetesimals are detected.

astro-ph.EP↗

arXiv2014

The experiments with the High Resolution Kaon Spectrometer at JLab Hall C and the new spectroscopy of ${}^{12}_Λ\text{B}$ hypernuclei

Since the pioneering experiment, E89-009 studying hypernuclear spectroscopy using the $(e,e^{\prime}K^+)$ reaction was completed, two additional experiments, E01-011 and E05-115, were performed at Jefferson Lab. These later experiments used a modified experimental design, the "tilt method", to dramatically suppress the large electromagnetic background, and allowed for a substantial increase in luminosity. Additionally, a new kaon spectrometer, HKS (E01-011), a new electron spectrometer, HES, and a new splitting magnet were added to produce precision, high-resolution hypernuclear spectroscopy. These two experiments, E01-011 and E05-115, resulted in two new data sets, producing sub-MeV energy resolution in the spectra of ${}^{7}_Λ\text{He}$, ${}^{12}_Λ\text{B}$ and ${}^{28}_Λ\text{Al}$ and ${}^{7}_Λ\text{He}$, ${}^{10}_Λ\text{Be}$, ${}^{12}_Λ\text{B}$ and ${}^{52}_Λ\text{V}$. All three experiments obtained a ${}^{12}_Λ\text{B}$, spectrum, which is the most characteristic $p$-shell hypernucleus and is commonly used for calibration. Independent analyses of these different experiments demonstrate excellent consistency and provide the clearest level structure to date of this hypernucleus as produced by the $(e,e^{\prime}K^+)$ reaction. This paper presents details of these experiments, and the extraction and analysis of the observed ${}^{12}_Λ\text{B}$ spectrum.

nucl-ex↗

arXiv2013

Measurement of thin films using very long acoustic wavelengths

A procedure for measuring material thickness by means of necessarily-long acoustic wavelengths is examined. The approach utilizes a temporal phase lag caused by the impulse time of wave momentum transferred through a thin layer that is much denser than its surrounding medium. In air, it is predicted that solid or liquid layers below approximately 1/2000 of the acoustic wavelength will exhibit a phase shift with an arctangent functional dependence on thickness and layer density. The effect is verified for thin films on the scale of 10 microns using audible frequency sound (7 kHz). Soap films as thin as 100 nm are then measured using 40 kHz air ultrasound. The method's potential for imaging applications is demonstrated by combining the approach with near-field holography, resulting in reconstructions with sub-wavelength resolution in both the depth and lateral directions. Potential implications at very high and very low acoustic frequencies are discussed.

physics.ins-det↗