arXiv subjects

H. Peter

Publications and source records attributed to H. Peter.

At least 55 records · Page 3Linked to original sources

arXiv2021

Stellar X-rays and magnetic activity in 3D MHD coronal models

Observations suggest a power-law relation between the coronal emission in X-rays, $L_{\rm{X}}$, and the total (unsigned) magnetic flux at the stellar surface, $Φ$. The physics basis for this relation is poorly understood. We use three-dimensional (3D) magnetohydrodynamics (MHD) numerical models of the coronae above active regions, that is, strong concentrations of magnetic field, to investigate the $L_{\rm{X}}$ versus $Φ$ relation and illustrate this relation with an analytical model based on simple well-established scaling relations. In the 3D MHD model horizontal (convective) motions near the surface induce currents in the coronal magnetic field that are dissipated and heat the plasma. This self-consistently creates a corona with a temperature of 1 MK. We run a series of models that differ in terms of the (unsigned) magnetic flux at the surface by changing the (peak) magnetic field strength while keeping all other parameters fixed. In the 3D MHD models we find that the energy input into the corona, characterized by either the Poynting flux or the total volumetric heating, scales roughly quadratically with the unsigned surface flux $Φ$. This is expected from heating through field-line braiding. Our central result is the nonlinear scaling of the X-ray emission as $L_{\rm{X}}\propto Φ^{3.44}$. This scaling is slightly steeper than found in recent observations that give power-law indices of up to only 2 or 3. Assuming that on a real star, not only the peak magnetic field strength in the active regions changes but also their number (or surface filling factor), our results are consistent with observations. Our model provides indications of what causes the steep increase in X-ray luminosity by four orders of magnitude from solar-type activity to fast rotating active stars.

astro-ph.SR↗

arXiv2021

First light observations of the solar wind in the outer corona with the Metis coronagraph

The investigation of the wind in the solar corona initiated with the observations of the resonantly scattered UV emission of the coronal plasma obtained with UVCS-SOHO, designed to measure the wind outflow speed by applying the Doppler dimming diagnostics. Metis on Solar Orbiter complements the UVCS spectroscopic observations, performed during solar activity cycle 23, by simultaneously imaging the polarized visible light and the HI Ly-alpha corona in order to obtain high-spatial and temporal resolution maps of the outward velocity of the continuously expanding solar atmosphere. The Metis observations, on May 15, 2020, provide the first HI Ly-alpha images of the extended corona and the first instantaneous map of the speed of the coronal plasma outflows during the minimum of solar activity and allow us to identify the layer where the slow wind flow is observed. The polarized visible light (580-640 nm), and the UV HI Ly-alpha (121.6 nm) coronal emissions, obtained with the two Metis channels, are combined in order to measure the dimming of the UV emission relative to a static corona. This effect is caused by the outward motion of the coronal plasma along the direction of incidence of the chromospheric photons on the coronal neutral hydrogen. The plasma outflow velocity is then derived as a function of the measured Doppler dimming. The static corona UV emission is simulated on the basis of the plasma electron density inferred from the polarized visible light. This study leads to the identification, in the velocity maps of the solar corona, of the high-density layer about +/-10 deg wide, centered on the extension of a quiet equatorial streamer present at the East limb where the slowest wind flows at about (160 +/- 18) km/s from 4 Rs to 6 Rs. Beyond the boundaries of the high-density layer, the wind velocity rapidly increases, marking the transition between slow and fast wind in the corona.

astro-ph.SR↗

arXiv2021

Extreme-ultraviolet bursts and nanoflares in the quiet-Sun transition region and corona

The quiet solar corona consists of myriads of loop-like features, with magnetic fields originating from network and internetwork regions on the solar surface. The continuous interaction between these different magnetic patches leads to transient brightenings or bursts that might contribute to the heating of the solar atmosphere. However, it remains unclear whether such transients, which are mostly observed in the EUV, play a significant role in atmospheric heating. We revisit the open question of these bursts as a prelude to the new high-resolution EUV imagery expected from the recently launched Solar Orbiter. We use EUV images recorded by the SDO/AIA to investigate statistical properties of the bursts. We detect the bursts in the 171 Å filter images of AIA in an automated way through a pixel-wise analysis by imposing different intensity thresholds. By exploiting the high cadence (12 s) of the AIA observations, we find that the distribution of lifetimes of these events peaks at about 120 s. The sizes of the detected bursts are limited by the spatial resolution, which indicates that a larger number of events might be hidden in the AIA data. We estimate that about 100 new bursts appear per second on the whole Sun. The detected bursts have nanoflare-like energies of $10^{24}$\,erg per event. Based on this, we estimate that at least 100 times more events of a similar nature would be required to account for the energy that is required to heat the corona. When AIA observations are considered alone, the EUV bursts discussed here therefore play no significant role in the coronal heating of the quiet Sun. If the coronal heating of the quiet Sun is mainly bursty, then the high-resolution EUV observations from Solar Orbiter may be able to reduce the deficit in the number of EUV bursts seen with SDO/AIA at least partly by detecting more such events.

astro-ph.SR↗

arXiv2021

Magnetic Imaging of the Outer Solar Atmosphere (MImOSA): Unlocking the driver of the dynamics in the upper solar atmosphere

The magnetic activity of the Sun directly impacts the Earth and human life. Likewise, other stars will have an impact on the habitability of planets orbiting these host stars. The lack of information on the magnetic field in the higher atmospheric layers hampers our progress in understanding solar magnetic activity. Overcoming this limitation would allow us to address four paramount long-standing questions: (1) How does the magnetic field couple the different layers of the atmosphere, and how does it transport energy? (2) How does the magnetic field structure, drive and interact with the plasma in the chromosphere and upper atmosphere? (3) How does the magnetic field destabilise the outer solar atmosphere and thus affect the interplanetary environment? (4) How do magnetic processes accelerate particles to high energies? New ground-breaking observations are needed to address these science questions. We suggest a suite of three instruments that far exceed current capabilities in terms of spatial resolution, light-gathering power, and polarimetric performance: (a) A large-aperture UV-to-IR telescope of the 1-3 m class aimed mainly to measure the magnetic field in the chromosphere by combining high spatial resolution and high sensitivity. (b) An extreme-UV-to-IR coronagraph that is designed to measure the large-scale magnetic field in the corona with an aperture of about 40 cm. (c) An extreme-UV imaging polarimeter based on a 30 cm telescope that combines high throughput in the extreme UV with polarimetry to connect the magnetic measurements of the other two instruments. This mission to measure the magnetic field will unlock the driver of the dynamics in the outer solar atmosphere and thereby greatly advance our understanding of the Sun and the heliosphere.

astro-ph.SR↗

arXiv2020

Impulsive coronal heating during the interaction of surface magnetic fields in the lower solar atmosphere

Coronal plasma in the cores of solar active regions is impulsively heated to more than 5 MK. The nature and location of the magnetic energy source responsible for such impulsive heating is poorly understood. Using observations of seven active regions from the Solar Dynamics Observatory, we found that a majority of coronal loops hosting hot plasma have at least one footpoint rooted in regions of interacting mixed magnetic polarity at the solar surface. In cases when co-temporal observations from the Interface Region Imaging Spectrograph space mission are available, we found spectroscopic evidence for magnetic reconnection at the base of the hot coronal loops. Our analysis suggests that interactions of magnetic patches of opposite polarity at the solar surface and the associated energy release during reconnection are key to impulsive coronal heating.

astro-ph.SR↗

arXiv2020

Observations and modeling of the onset of fast reconnection in the solar transition region

Magnetic reconnection is a fundamental plasma process that plays a critical role not only in energy release in the solar atmosphere, but also in fusion, astrophysical, and other space plasma environments. One of the challenges in explaining solar observations in which reconnection is thought to play a critical role is to account for the transition of the dynamics from a slow quasi-continuous phase to a fast and impulsive energetic burst of much shorter duration. Despite the theoretical progress in identifying mechanisms that might lead to rapid onset, a lack of observations of this transition has left models poorly constrained. High-resolution spectroscopic observations from NASA's Interface Region Imaging Spectrograph (IRIS) now reveal tell-tale signatures of the abrupt transition of reconnection from a slow phase to a fast, impulsive phase during UV bursts or explosive events in the Sun's atmosphere. Our observations are consistent with numerical simulations of the plasmoid instability, and provide evidence for the onset of fast reconnection mediated by plasmoids and new opportunities for remote-sensing diagnostics of reconnection mechanisms on the Sun.

astro-ph.SR↗

arXiv2020

The Solar Orbiter mission -- Science overview

Solar Orbiter, the first mission of ESA's Cosmic Vision 2015-2025 programme and a mission of international collaboration between ESA and NASA, will explore the Sun and heliosphere from close up and out of the ecliptic plane. It was launched on 10 February 2020 04:03 UTC from Cape Canaveral and aims to address key questions of solar and heliospheric physics pertaining to how the Sun creates and controls the Heliosphere, and why solar activity changes with time. To answer these, the mission carries six remote-sensing instruments to observe the Sun and the solar corona, and four in-situ instruments to measure the solar wind, energetic particles, and electromagnetic fields. In this paper, we describe the science objectives of the mission, and how these will be addressed by the joint observations of the instruments onboard. The paper first summarises the mission-level science objectives, followed by an overview of the spacecraft and payload. We report the observables and performance figures of each instrument, as well as the trajectory design. This is followed by a summary of the science operations concept. The paper concludes with a more detailed description of the science objectives. Solar Orbiter will combine in-situ measurements in the heliosphere with high-resolution remote-sensing observations of the Sun to address fundamental questions of solar and heliospheric physics. The performance of the Solar Orbiter payload meets the requirements derived from the mission's science objectives. Its science return will be augmented further by coordinated observations with other space missions and ground-based observatories.

astro-ph.SR↗

arXiv2020

Non-thermal line broadening due to braiding-induced turbulence in solar coronal loops

Aims: Emission line profiles from solar coronal loops exhibit properties that are unexplained by current models. We investigate the non-thermal broadening associated with plasma heating in coronal loops that is induced by magnetic field line braiding. Methods: We describe the coronal loop by a 3D magnetohydrodynamic model of the turbulent decay of an initially-braided magnetic field. From this we synthesize the Fe XII line at 193 Angstroms that forms around 1.5 MK. Results: Key features of current observations of extreme UV lines from the corona are reproduced in the synthesised spectra: (i) Typical non-thermal widths range from 15 to 20 km/s. (ii) The widths are approximately independent of the size of the field of view. (iii) There is a correlation between line intensity and the non-thermal broadening. (iv) Spectra are found to be non-Gaussian, with enhanced power in the wings of order 10-20%. Conclusions: Our model provides an explanation that self-consistently connects the heating process to the observed non-thermal line broadening. The non-Gaussian nature of the spectra is a consequence of the non-Gaussian nature of the underlying velocity fluctuations, interpreted as a signature of intermittency in the turbulence.

astro-ph.SR↗

arXiv2020

Stellar coronal X-ray emission and surface magnetic flux

Observations show that the coronal X-ray emission of the Sun and other stars depends on the surface magnetic field. Using power-law scaling relations between different physical parameters, we build an analytical model to connect the observed X-ray emission to the magnetic flux. The basis for our model are the scaling laws of Rosner, Tucker \& Vaiana (RTV) that connect the temperature and pressure of a coronal loop to its length and energy input. To estimate the energy flux into the upper atmosphere, we use scalings derived for different heating mechanisms, e.g. for field-line braiding or Alfven-wave heating. We supplement this by observed relations between active region size and magnetic flux and derive scalings of how X-ray emissivity depends on temperature. Based on our analytical model, we find a power-law dependence of the X-ray emission on the magnetic flux, $L_{\rm X}\propto Φ^m$, with a power-law index $m$ being in the range from about 1 to 2. This finding is consistent with a wide range of observations, from individual features on the Sun, e.g. bright points or active regions, to stars of different types and varying levels of activity. The power-law index $m$ depends on the choice of the heating mechanism, and our results slightly favour the braiding and nanoflare scenarios over Alfvén wave heating. In addition, the choice of instrument will have an impact on the power-law index $m$, which is because of the sensitivity of the observed wavelength region to the temperature of the coronal plasma. Overall, our simple analytical model based on the RTV scaling laws gives a good representation of the observed X-ray emission. This underlines that we might be able to understand stellar coronal activity though a collection of basic building blocks, i.e. loops, that we can study in spatially resolved detail on the Sun.

astro-ph.SR↗

arXiv2019

The Solar Orbiter SPICE instrument -- An extreme UV imaging spectrometer

The Spectral Imaging of the Coronal Environment (SPICE) instrument is a high-resolution imaging spectrometer operating at extreme ultraviolet (EUV) wavelengths. In this paper, we present the concept, design, and pre-launch performance of this facility instrument on the ESA/NASA Solar Orbiter mission. The goal of this paper is to give prospective users a better understanding of the possible types of observations, the data acquisition, and the sources that contribute to the instrument's signal. The paper discusses the science objectives, with a focus on the SPICE-specific aspects, before presenting the instrument's design, including optical, mechanical, thermal, and electronics aspects. This is followed by a characterisation and calibration of the instrument's performance. The paper concludes with descriptions of the operations concept and data processing. The performance measurements of the various instrument parameters meet the requirements derived from the mission's science objectives. The SPICE instrument is ready to perform measurements that will provide vital contributions to the scientific success of the Solar Orbiter mission.

astro-ph.IM↗

arXiv2019

Plasmoid-mediated reconnection in solar UV bursts

UV bursts are transients in the solar atmosphere with an increased impulsive emission in the extreme UV lasting for one to several tens of minutes. They often show spectral profiles indicative of a bi-directional outflow in response to magnetic reconnection. To understand UV bursts, we study how motions of magnetic elements at the surface can drive the self-consistent formation of a current sheet resulting in plasmoid-mediated reconnection. In particular, we want to study the role of the height of the reconnection in the atmosphere. We conducted numerical experiments solving the 2D MHD equations from the solar surface to the upper atmosphere. Motivated by observations, we drove a small magnetic patch embedded in a larger system of magnetic field of opposite polarity. This configuration creates an X-type neutral point in the initial potential field. The models are characterized by the plasma-beta at the height of this X point. The driving at the surface stretches the X-point into a current sheet, where plasmoids appear, and a bi-directional jet forms. This is consistent with what is expected for UV bursts or explosive events, and we provide a self-consistent model of the formation of the reconnection region in such events. The gravitational stratification gives an explanation for why explosive events are restricted to a temperature range around a few 0.1 MK, and the presence of plasmoids in the reconnection process provides an understanding of the observed variability during the transient events on a timescale of minutes. Our numerical experiments provide a comprehensive understanding of UV bursts and explosive events, in particular of how the atmospheric response changes if the reconnection happens at different plasma-beta, that is, at different heights in the atmosphere. This analysis also gives new insight into how UV bursts might be related to the photospheric Ellerman bombs.

astro-ph.SR↗

arXiv2019

Hot prominence spicules launched from turbulent cool solar prominences

A solar filament is a dense cool condensation that is supported and thermally insulated by magnetic fields in the rarefied hot corona. Its evolution and stability, leading to either an eruption or disappearance, depend on its coupling with the surrounding hot corona through a thin transition region, where the temperature steeply rises. However, the heating and dynamics of this transition region remain elusive. We report extreme-ultraviolet observations of quiescent filaments from the Solar Dynamics Observatory that reveal prominence spicules propagating through the transition region of the filament-corona system. These thin needle-like jet features are generated and heated to at least 0.7 MK by turbulent motions of the material in the filament. We suggest that the prominence spicules continuously channel the heated mass into the corona and aid in the filament evaporation and decay. Our results shed light on the turbulence-driven heating in magnetized condensations that are commonly observed on the Sun and in the interstellar medium.

astro-ph.SR↗

arXiv2019

Energetics of magnetic transients in a solar active region plage

Densely packed coronal loops are rooted in plages in the vicinity of active regions on the Sun. The photospheric magnetic features underlying these plages are patches of mostly unidirectional magnetic field extending several arcsec on the solar surface. We aim to explore the transient nature of the magnetic field, its mixed-polarity characteristics, and the associated energetics in plages using high resolution observations and simulations. We used photospheric Fe I 6173 Å spectropolarimetric observations of a decaying active region obtained from the SST. These data were inverted to retrieve the photospheric magnetic field underlying the plage as identified in the EUV emission maps obtained from the SDO/AIA. To obtain better insight into the evolution of plages, we performed 3D radiation magnetohydrodynamic simulations of magnetoconvection using the MURaM code. The observations show transient magnetic flux emergence and cancellation events within the plage on timescales of a few 100 s and on spatial scales comparable to granules. These transient events occur at the footpoints of active region plage loops. In one case the coronal response at the footpoints of these loops is clearly associated with the underlying transient. The simulations also reveal similar magnetic flux emergence and cancellation events that extend to even smaller spatial and temporal scales. Individual simulated transient events transfer an energy flux in excess of 1 MW m$^{-2}$ through the photosphere. We suggest that the magnetic transients could play an important role in the energetics of active region plage. Both in observations and simulations, the opposite-polarity magnetic field brought up by transient flux emergence cancels with the surrounding plage field. Magnetic reconnection associated with such transient events likely conduits magnetic energy to power the overlying chromosphere and coronal loops.

astro-ph.SR↗

arXiv2018

Nature of the energy source powering solar coronal loops driven by nanoflares

Magnetic energy is required to heat the corona, the outer atmosphere of the Sun, to millions of degrees. We study the nature of the magnetic energy source that is probably responsible for the brightening of coronal loops driven by nanoflares in the cores of solar active regions. We consider observations of two active regions (ARs), 11890 and 12234, in which nanoflares have been detected. To this end, we use ultraviolet (UV) and extreme ultraviolet (EUV) images from the Atmospheric Imaging Assembly (AIA) onboard the Solar Dynamics Observatory (SDO) for coronal loop diagnostics. These images are combined with the co-temporal line-of-sight magnetic field maps from the Helioseismic and Magnetic Imager (HMI) onboard SDO to investigate the connection between coronal loops and their magnetic roots in the photosphere. The core of these ARs exhibit loop brightening in multiple EUV channels of AIA, particularly in its 9.4 nm filter. The HMI magnetic field maps reveal the presence of a complex mixed polarity magnetic field distribution at the base of these loops. We detect the cancellation of photospheric magnetic flux at these locations at a rate of about $10^{15}$ Mx s$^{-1}$. The associated compact coronal brightenings directly above the cancelling magnetic features are indicative of plasma heating due to chromospheric magnetic reconnection. We suggest that the complex magnetic topology and the evolution of magnetic field, such as flux cancellation in the photosphere and the resulting chromospheric reconnection, can play an important role in energizing active region coronal loops driven by nanoflares. Our estimate of magnetic energy release during flux cancellation in the quiet Sun suggests that chromospheric reconnection can also power the quiet corona.

astro-ph.SR↗

arXiv2018

A Si IV/O IV electron density diagnostic for the analysis of IRIS solar spectra

Solar spectra of ultraviolet bursts and flare ribbons from the Interface Region Imaging Spectrograph (IRIS) have suggested high electron densities of $>10^{12}$ cm$^{-3}$ at transition region temperatures of 0.1 MK, based on large intensity ratios of Si IV $λ$1402.77 to O IV $λ$1401.16. In this work a rare observation of the weak O IV $λ$1343.51 line is reported from an X-class flare that peaked at 21:41 UT on 2014 October 24. This line is used to develop a theoretical prediction of the Si IV $λ$1402.77 to O IV $λ$1401.16 ratio as a function of density that is recommended to be used in the high density regime. The method makes use of new pressure-dependent ionization fractions that take account of the suppression of dielectronic recombination at high densities. It is applied to two sequences of flare kernel observations from the October 24 flare. The first shows densities that vary between $3\times 10^{12}$ to $3 \times 10^{13}$ cm$^{-3}$ over a seven minute period, while the second location shows stable density values of around $2\times 10^{12}$ cm$^{-3}$ over a three minute period.

astro-ph.SR↗

arXiv2017

Crossover from Jamming to Clogging Behaviors in Heterogeneous Environments

Jamming describes a transition from a flowing or liquid state to a solid or rigid state in a loose assembly of particles such as grains or bubbles. In contrast, clogging describes the ceasing of the flow of particulate matter through a bottleneck. It is not clear how to distinguish jamming from clogging, nor is it known whether they are distinct phenomena or fundamentally the same. We examine an assembly of disks moving through a random obstacle array and identify a transition from clogging to jamming behavior as the disk density increases. The clogging transition has characteristics of an absorbing phase transition, with the disks evolving into a heterogeneous phase-separated clogged state after a critical diverging transient time. In contrast, jamming is a rapid process in which the disks form a homogeneous motionless packing, with a rigidity length scale that diverges as the jamming density is approached.

cond-mat.soft↗

arXiv2017

Observationally driven 3D MHD model of the solar corona above an active region

Aims. The goal is to employ a 3D magnetohydrodynamics (MHD) model including spectral synthesis to model the corona in an observed solar active region. This will allow us to judge the merits of the coronal heating mechanism built into the 3D model. Methods. Photospheric observations of the magnetic field and horizontal velocities in an active region are used to drive our coronal simulation from the bottom. The currents induced by this heat the corona through Ohmic dissipation. Heat conduction redistributes the energy that is lost in the end through optically thin radiation. Based on the MHD model, we synthesized profiles of coronal emission lines which can be directly compared to actual coronal observations of the very same active region. Results. In the synthesized model data we find hot coronal loops which host siphon flows or which expand and lose mass through draining. These synthesized loops are at the same location as and show similar dynamics in terms of Doppler shifts to the observed structures. This match is shown through a comparison with Hinode data as well as with 3D stereoscopic reconstructions of data from STEREO. Conclusions. The considerable match to the actual observations shows that the field-line braiding mechanism leading to the energy input in our corona provides the proper distribution of heat input in space and time. From this we conclude that in an active region the field-line braiding is the dominant heating process, at least at the spatial scales available to current observations.

astro-ph.SR↗

arXiv2017

Compact solar UV burst triggered in a magnetic field with a fan-spine topology

Solar UV bursts are small-scale features that exhibit intermittent brightenings that are thought to be due to magnetic reconnection. They are observed abundantly in the chromosphere and transition region, in particular in active regions. We investigate in detail a UV burst related to a magnetic feature that is advected by the moat flow from a sunspot towards a pore. The moving feature is parasitic in that its magnetic polarity is opposite to that of the spot and the pore. We used UV spectroscopic and slit-jaw observations from the IRIS to identify and study chromospheric and transition region spectral signatures of said UV burst. To investigate the magnetic topology surrounding the UV burst, we used a two-hour-long time sequence of simultaneous line-of-sight magnetograms from the HMI and performed data-driven 3D magnetic field extrapolations by means of a magnetofrictional relaxation technique. We can connect UV burst signatures to the overlying EUV coronal loops observed by the AIA. The UV burst shows a variety of extremely broad line profiles indicating plasma flows in excess of $\pm$200 km s$^{-1}$ at times. The whole structure is divided into two spatially distinct zones of predominantly up- and downflows. The magnetic field extrapolations show a persistent fan-spine magnetic topology at the UV burst. The associated 3D magnetic null point exists at a height of about 500 km above the photosphere and evolves co-spatially with the observed UV burst. The EUV emission at the footpoints of coronal loops is correlated with the evolution of the underlying UV burst. The magnetic field around the null point is sheared by photospheric motions, triggering magnetic reconnection that ultimately powers the observed UV burst and energises the overlying coronal loops. The location of the null point suggests that the burst is triggered low in the solar chromosphere.

astro-ph.SR↗