Searcharxiv⌕ Search

arXiv subjects

Hagai S. Eisenberg

Publications and source records attributed to Hagai S. Eisenberg.

10 recordsLinked to original sources

Direct Polarization-Entangled Photon Pair Generation Using Domain-Engineered Nonlinear Crystals

A bi-photon polarization-frequency entanglement source was realized by shaping the phase-matching function of a poled KTP crystal. It provides a simple method to achieve either polarization or spectral entanglement in a simple collinear setup, based on single-pass SPDC and a dichroic (or polarizing) beam splitter. This is a robust and cost-effective configuration that can be easily implemented outside the laboratory environment. We characterized the source by two approaches: reconstructing the density matrix of the generated state with quantum state tomography, by recording the coincidences across 16 mutual polarization settings, in addition to a new method based on quantifying the symmetry of the joint spectral intensity by swapping between the signal and idler wavelengths. The polarization-entangled source violates the Clauser-Horne-Shimony-Holt inequality with a measured $S=2.747\pm 0.004$. We also measured the polarization entanglement visibility in two mutually unbiased polarization bases and evaluated the squeezing level by characterizing the reduction in visibility at high pump power.

quant-ph↗

Quantum Inspired Microwave Phase Super-Resolution at Room Temperature

Quantum metrology has been shown to surpass classical limits of correlation, resolution, and sensitivity. It has been introduced to interferometric Radar schemes, with intriguing preliminary results. Even quantum-inspired detection of classical signals may be advantageous in specific use cases. Following ideas demonstrated so far only in the optical domain, where practically no thermal background photons exist, we realize room-temperature microwave frequency super-resolved phase measurements with trillions of photons, while saturating the Cramer-Rao bound of sensitivity. We experimentally estimate the interferometric phase using the expectation value of the Parity operator by two methods. We achieve super-resolution up to 1200 times better than the wavelength with 25ns integration time and 56dB SNR.

quant-ph↗

High-dimensional coherent one-way quantum key distribution

High-dimensional quantum key distribution (QKD) offers secure communication, with secure key rates that surpass those achievable by QKD protocols utilizing two-dimensional encoding. However, existing high-dimensional QKD protocols require additional experimental resources, such as multiport interferometers and multiple detectors, thus raising the cost of practical high-dimensional systems and limiting their use. Here, we present and analyze a novel protocol for arbitrary-dimensional QKD, that requires only the hardware of a standard two-dimensional system. We provide security proofs against individual attacks and coherent attacks, setting an upper and lower bound on the secure key rates. Then, we test the new high-dimensional protocol in a standard two-dimensional QKD system over a 40 km fiber link. The new protocol yields a two-fold enhancement of the secure key rate compared to the standard two-dimensional coherent one-way protocol, without introducing any hardware modifications to the system. This work, therefore, holds great potential to enhance the performance of already deployed time-bin QKD systems through a software update alone. Furthermore, its applications extend across different encoding schemes of QKD qudits.

quant-ph↗

Near-deterministic hybrid generation of arbitrary photonic graph states using a single quantum emitter and linear optics

Since linear-optical two-photon gates are inherently probabilistic, measurement-based implementations are particularly well suited for photonic platforms: a large highly-entangled photonic resource state, called a graph state, is consumed through measurements to perform a computation. The challenge is thus to produce these graph states. Several generation procedures, which use either interacting quantum emitters or efficient spin-photon interface, have been proposed to create these photonic graph states deterministically. Yet, these solutions are still out of reach experimentally since the state-of-the-art is the generation of a linear graph state. Here, we introduce near-deterministic solutions for the generation of graph states using the current quantum emitter capabilities. We propose hybridizing quantum-emitter-based graph state generation with all-photonic fusion gates to produce graph states of complex topology near-deterministically. Our results should pave the way towards the practical implementation of resource-efficient quantum information processing, including measurement-based quantum communication and quantum computing.

quant-ph↗

Thresholded Quantum LIDAR -- Exploiting Photon-Number-Resolving Detection

We present a technique that improves the signal-to-noise-ratio (SNR) of range-finding, sensing, and other light-detection applications. The technique filters out low photon numbers using photon-number-resolving detectors (PNRDs). This technique has no classical analog and cannot be done with classical detectors. We investigate the properties of our technique and show under what conditions the scheme surpasses the classical SNR. Finally, we simulate the operation of a rangefinder, showing improvement with a low number of signal samplings and confirming the theory with a high number of signal samplings.

quant-ph↗

Quantum tomography of photon states encoded in polarization and picosecond time-bins

A single photon has many physical degrees of freedom (DOF) that can carry the state of a high-dimensional quantum system. Nevertheless, only a single DOF is usually used in any specific demonstration. Furthermore, when more DOF are being used, they are analyzed and measured one at a time. We introduce a two-qubit information system, realized by two degrees of freedom of a single photon: polarization and time. The photon arrival time is divided into two time-bins representing a qubit, while its polarization state represents a second qubit. The time difference between the two time-bins is created without an interferometer at the picosecond scale, which is much smaller than the detector's response time. The two physically different DOF are analyzed simultaneously by photon bunching between the analyzed photon and an ancilla photon. Full two-qubit states encoded in single photons were reconstructed using quantum state tomography, both when the two DOF were entangled and when they were not, with fidelities higher than 96%.

quant-ph↗

Low Intensity LiDAR using Compressed Sensing and a Photon Number Resolving Detector

LiDAR (laser based radar) systems are a major part of many new real-world interactive systems, one of the most notable being autonomous cars. The current market LiDAR systems are limited by detector sensitivity: when output power is at eye-safe levels, the range is limited. Long range operation also slows image acquisition as flight-time increases. We present an approach that combines a high sensitivity photon number resolving diode with machine learning and a micro-mechanical digital mirror device to achieve safe and fast long range 3D scanning.

eess.SP↗

Entangled coherent states by mixing squeezed vacuum and coherent light

Entangled coherent states are shown to emerge, with high fidelity, when mixing coherent and squeezed vacuum states of light on a beam-splitter. These maximally entangled states, where photons bunch at the exit of a beamsplitter, are measured experimentally by Fock-state projections. Entanglement is examined theoretically using a Bell-type nonlocality test and compared with ideal entangled coherent states. We experimentally show nearly perfect similarity with entangled coherent states for an optimal ratio of coherent and squeezed vacuum light. In our scheme, entangled coherent states are generated deterministically with small amplitudes, which could be beneficial, for example, in deterministic distribution of entanglement over long distances.

quant-ph↗

Absolute self-calibration of single-photon and multiplexed photon-number-resolving detectors

Single-photon detectors are widely used in modern quantum optics experiments and applications. Like all detectors, it is important for these devices to be accurately calibrated. A single-photon detector is calibrated by determining its detection efficiency; the standard method to measure this quantity requires comparison to another detector. Here, we suggest a method to measure the detection efficiency of a single photon detector without requiring an external reference detector. Our method is valid for individual single-photon detectors as well as multiplexed detectors, which are known to be photon number resolving. The method exploits the photon-number correlations of a nonlinear source, as well as the nonlinear loss of a single photon detector that occurs when multiple photons are detected simultaneously. We have analytically modeled multiplexed detectors and used the results to experimentally demonstrate calibration of a single photon detector without the need for an external reference detector.

quant-ph↗

Ultrafast Optical Response of a High-Reflectivity GaAs/AlAs Bragg Mirror

The ultrafast response of a high-reflectivity GaAs/AlAs Bragg mirror to optical pumping is investigated for all-optical switching applications. Both Kerr and free carrier nonlinearities are induced with 100 fs, 780 nm pulses with a fluence of 0.64 kJ/m^2 and 0.8 kJ/m^2. The absolute transmission of the mirror at 931 nm increases by a factor of 27 from 0.0024% to 0.065% on a picosecond timescale. These results demonstrate the potential for a high-reflectivity ultrafast switchable mirror for quantum optics and optical communication applications. A design is proposed for a structure to be pumped below the bandgaps of the semiconductor mirror materials. Theoretical calculations on this structure show switching ratios up to 2200 corresponding to switching from 0.017% to 37.4% transmission.

cond-mat.mtrl-sci↗