arXiv subjects

Hagen Renner

Publications and source records attributed to Hagen Renner.

9 recordsLinked to original sources

arXiv2024

Size dependent photoemission study by electrochemical coarsening of nanoporous gold

The generation and utilization of hot charge carriers in plasmonic materials have emerged as a topic of significant importance, with profound implications across multiple disciplines, including optoelectronics, photovoltaics, photocatalysis, and sensing. In this study, we investigate the hot electron transfer from nanoporous gold (npAu) in dependence of the structure size, utilizing both the nanoscale feature size and the interconnected nature of this material. We employ photoelectron injection from nanoporous gold into the electrolyte under UV illumination as a test electron transfer process. Nanoporous gold thin films with sub-10 nm initial ligament diameter are stepwise coarsened by potential cycles in a photoelectrochemical setup, thereby allowing us to precisely probe the influence of ligament diameter on the photocurrent response. The resulting ligament diameter variations are confirmed by scanning electron microscopy (SEM) analysis. As the ligament diameter increased from 8 to 16 nm, there was a corresponding decrease in quantum efficiency proportional to the inverse ligament diameter squared. Such dependency is expected for electrons excited by surface collisions. For the small ligament diameter of 10 nm we estimate an emission efficiency of excited 6sp electrons as 3.14%, reaching 23% for the surface excited electrons.

physics.optics↗

arXiv2021

Fourier optics with linearly tapered waveguides: light trapping and focusing

An optical pulse asymptotically reaching zero group velocity in tapered waveguides can ultimately stop at a certain position in the taper accompanied by a strong spatial compression. This phenomenon can be also observed in spatio-temporal systems where the pulse velocity asymptotically reaches the velocity of a tapered front. The first system is well known from tapered plasmonic waveguides where adiabatic nano-focusing of light is observed. Its counterpart in the spatio-temporal system is the optical push broom effect where a nonlinear front collects and compresses the signal. Here, we use the slowly-varying envelope approximation to describe such systems. We demonstrate an analytical solution for the linear taper and the piecewise linear dispersion and show that the solution in this case resembles that of an optical lens in paraxial approximation. In particular, the spatial distribution of the focused light represents the Fourier transform of the signal at the input.

physics.optics↗

arXiv2019

Linear Schrödinger equation with temporal evolution for front induced transitions

The nonlinear Schrödinger equation based on slowly varying approximation is usually applied to describe the pulse propagation in nonlinear waveguides. However, for the case of the front induced transitions (FITs), the pump effect is well described by the dielectric constant perturbation in space and time. Thus, a linear Schrödinger equation can be used. Also, in waveguides with weak dispersion the spatial evolution of the pulse temporal profile is usually tracked. Such a formulation becomes impossible for optical systems for which the group index or higher dispersion terms diverge as is the case near the band edge of photonic crystals. For the description of FITs in such systems a linear Schrödinger equation can be used where temporal evolution of the pulse spatial profile is tracked instead of tracking the spatial evolution. This representation provides the same descriptive power and can easily deal with zero group velocities. Furthermore, the Schrödinger equation with temporal evolution can describe signal pulse reflection from both static and counter-propagating fronts, in contrast to the Schrödinger equation with spatial evolution which is bound to forward propagation. Here, we discuss the two approaches and demonstrate the applicability of the spatial evolution for the system close to the band edge where the group velocity vanishes by simulating intraband indirect photonic transitions.

physics.optics↗

arXiv2018

Ewald sphere construction for structural colors

Disordered structures producing a non-iridescent color impression have been shown to feature a spherically shaped Fourier transform of their refractive-index distribution. We determine the direction and efficiency of scattering from thin films made from such structures with the help of the Ewald sphere construction which follows from first-order scattering approximation. This way we present a simple geometrical argument why these structures are well suited for creating short wavelength colors like blue but are hindered from producing long wavelength colors like red. We also numerically synthesize a model structure dedicated to produce a sharp spherical shell in reciprocal space. The reflectivity of this structure as predicted by the first-order approximation is compared to direct electromagnetic simulations. The results indicate the Ewald sphere construction to constitute a simple geometrical tool that can be used to describe and to explain important spectral and directional features of the reflectivity. It is shown that total internal reflection in the film in combination with directed scattering can be used to obtain long wavelength structural colors.

physics.optics↗

arXiv2018

Photonic glass for high contrast structural color

Non-iridescent structural colors based on disordered arrangement of monodisperse spherical particles, also called photonic glass, show low color saturation due to gradual transition in reflectivity. No significant improvement is usually expected from particles optimization, as the Mie resonances are broad for small dielectric particles with moderate refractive index. Moreover, the short range order of a photonic glass alone is also insufficient to cause sharp spectral features. We show here, that the combination of a well-chosen particle geometry with the short range order of a photonic glass has strong synergetic effects. We demonstrate how core-shell particles can be used to obtain a sharp transition in the reflection spectrum of photonic glass which is essential to achieve a strong color saturation. The Fourier transform required for a highly saturated color can be achieved by shifting the first zero position of the motif Fourier transform to smaller wave numbers in respect to the peak of the lattice Fourier transform. We show that this can be obtained by choosing a non-monotonous refractive index distribution from the center of the particle through the shell and into the background material. The first-order theoretical predictions are confirmed by numerical simulations.

physics.optics↗

arXiv2018

A quantitative first-order approach for the scattering of light by structured thin films

We present a full vectorial first-order approach to the scattering by arbitrary photonic structures with a low refractive index contrast. Our approach uses the first-order Born approximation and keeps the simple geometrical representation of the Ewald sphere construction. Via normalization to a representative sample volume, the approach can also predict the scattering by infinitely extended layers of scattering media. It can therefore be used to describe and efficiently calculate the scattering by structures where the linear first-order scattering terms dominate, e.g. in low index contrast disordered structures creating a color impression.

physics.optics↗

arXiv2013

Comment on "Linear and passive silicon optical isolator" in Scientific Reports 2, 674

Wang et al. [1] demonstrated different power transmission coefficients for forward and backward propagation in simulation and experiment. From such a demonstration, the central claim of their paper is that "the spatial inversion symmetry breaking diode can construct an optical isolator in no conflict with any reciprocal principle". Their claim contradicts the Lorentz reciprocity theorem, from which it is well known that one cannot construct an isolator this way.

physics.optics↗

arXiv2011

Comment on "Nonreciprocal Light Propagation in a Silicon Photonic Circuit" in Science 333, 729-733 (2011)

In the recent article by Feng et al. [Science 333, 729-733 (2011)] a system is proposed with a periodic spatial modulation of refractive index and absorption. It is claimed that this system is nonreciprocal and can be used as an optical isolator. The authors use an unconventional definition of reciprocity and thus make wrong conclusions on the applicability of the described phenomena for optical isolators. (Submitted to Science on October 7, 2011)

physics.optics↗

arXiv2006

Self-imaging silicon Raman amplifier

We propose a new type of waveguide optical amplifier. The device consists of collinearly propagating pump and amplified Stokes beams with periodic imaging of the Stokes beam due to the Talbot effect. The application of this device as an Image preamplifier for Mid Wave Infrared (MWIR) remote sensing is discussed and its performance is described. Silicon is the preferred material for this application in MWIR due to its excellent transmission properties, high thermal conductivity, high damage threshold and the mature fabrication technology. In these devices, the Raman amplification process also includes four-wave-mixing between various spatial modes of pump and Stokes signals. This phenomenon is unique to nonlinear interactions in multimode waveguides and places a limit on the maximum achievable gain, beyond which the image begins to distort. Another source of image distortion is the preferential amplification of Stokes modes that have the highest overlap with the pump. These effects introduce a tradeoff between the gain and image quality. We show that a possible solution to this trade-off is to restrict the pump into a single higher order waveguide mode.

physics.optics↗