arXiv subjects

Haim Beidenkopf

Publications and source records attributed to Haim Beidenkopf.

29 records · Page 2Linked to original sources

arXiv2019

Partial lattice defects in higher order topological insulators

Nonzero weak topological indices are thought to be a necessary condition to bind a single helical mode to lattice dislocations. In this work we show that higher-order topological insulators (HOTIs) can, in fact, host a single helical mode along screw or edge dislocations (including step edges) in the absence of weak topological indices. When this occurs, the helical mode is necessarily bound to a dislocation characterized by a fractional Burgers vector, macroscopically detected by the existence of a stacking fault. The robustness of a helical mode on a partial defect is demonstrated by an adiabatic transformation that restores translation symmetry in the stacking fault. We present two examples of HOTIs, one intrinsic and one extrinsic, that show helical modes at partial dislocations. Since partial defects and stacking faults are commonplace in bulk crystals, the existence of such helical modes can measurably affect the expected conductivity in these materials.

cond-mat.mes-hall↗

arXiv2019

Spectroscopic Visualization of a Robust Electronic Response of Semiconducting Nanowires to Deposition of Superconducting Islands

Following significant progress in the visualization and characterization of Majorana end modes in hybrid systems of semiconducting nanowires and superconducting islands, much attention is devoted to the investigation of the electronic structure at the buried interface between the semiconductor and the superconductor. The properties of that interface and the structure of the electronic wavefunctions that occupy it determine the functionality and the topological nature of the superconducting state induced therein. Here we study this buried interface by performing spectroscopic mappings of superconducting aluminum islands epitaxially grown in-situ on indium arsenide nanowires. We find unexpected robustness of the hybrid system as the direct contact with the aluminum islands does not lead to any change in the chemical potential of the nanowires, nor does it induce a significant band bending in their vicinity. We attribute this to the presence of surface states bound to the facets of the nanowire. Such surface states, that are present also in bare nanowires prior to aluminum deposition, pin the Fermi-level thus rendering the nanowires resilient to surface perturbations. The aluminum islands further display Coulomb blockade gaps and peaks that signify the formation of a resistive tunneling barrier at the InAs-Al interface. At low energies we identify a potential energy barrier that further suppresses the transmittance through the interface. A corresponding barrier exists in bare semiconductors between surface states and the accumulation layer, induced to maintain charge neutrality. Our observations elucidate the delicate interplay between the resistive nature of the InAs-Al interface and the ability to proximitize superconductivity and tune the chemical potential in semiconductor-superconductor hybrid nanowires.

cond-mat.mes-hall↗

arXiv2019

Resolving the Topological Classification of Bismuth with Topological Defects

Bulk boundary correspondence in topological materials allows to study their bulk topology through the investigation of their topological boundary modes. However, for classes that share similar boundary phenomenology, the growing diversity of topological phases may lead to ambiguity in the topological classification of materials. Such is the current status of bulk bismuth. While some theoretical models indicate that bismuth possesses a trivial topological nature, other theoretical and experimental studies suggest non-trivial topological classifications such as a strong or a higher order topological insulator, both of which hosts helical modes on their boundaries. Here we use a novel approach to resolve the topological classification of bismuth by spectroscopically mapping the response of its boundary modes to a topological defect in the form of a screw dislocation (SD). We find that the edge mode extends over a wide energy range, and withstands crystallographic irregularities, without showing any signs of backscattering. It seems to bind to the bulk SD, as expected for a topological insulator (TI) with non-vanishing weak indices. We argue that the small scale of the bulk energy gap, at the time reversal symmetric momentum $L$, positions bismuth within the critical region of a topological phase transition to a strong TI with non-vanishing weak indices. We show that the observed boundary modes are approximately helical already on the $\mathbb{Z}_2$ trivial side of the topological phase transition. This work opens the door for further possibilities to examine the response of topological phases to crystallographic topological defects, and to uniquely explore their associated bulk boundary phenomena.

cond-mat.mes-hall↗

arXiv2019

Fermi-arc diversity on surface terminations of the magnetic Weyl semimetal Co3Sn2S2

Bulk-surface correspondence in Weyl semimetals assures the formation of topological "Fermi-arc" surface bands whose existence is guaranteed by bulk Weyl nodes. By investigating three distinct surface terminations of the ferromagnetic semimetal Co3Sn2S2 we verify spectroscopically its classification as a time reversal symmetry broken Weyl semimetal. We show that the distinct surface potentials imposed by three different terminations modify the Fermi-arc contour and Weyl node connectivity. On the Sn surface we identify intra-Brillouin zone Weyl node connectivity of Fermi-arcs, while on Co termination the connectivity is across adjacent Brillouin zones. On the S surface Fermi-arcs overlap with non-topological bulk and surface states that ambiguate their connectivity and obscure their exact identification. By these we resolve the topologically protected electronic properties of a Weyl semimetal and its unprotected ones that can be manipulated and engineered.

cond-mat.mes-hall↗

arXiv2018

Coexisting surface states in the weak and crystalline topological insulator Bi_2TeI

The established diversity of electronic topology classes lends the opportunity to pair them into dual topological complexes. Bulk-surface correspondence then ensures the coexistence of a combination of boundary states that cannot be realized but only at the various surfaces of such a dual topological material. We show that the layered compound Bi_2TeI realizes a dual topological insulator. It exhibits band inversions at two time reversal symmetry points of the bulk band which classify it as a weak topological insulator with metallic states on its (010) 'side' surfaces. Additional mirror symmetry of the crystal structure concurrently classifies it as a topological crystalline insulator. Bi2TeI is therefore predicted to host a pair of Dirac cones protected by time reversal symmetry on its 'side' surfaces and three pairs of Dirac cones protected by mirror symmetry on its 'top' and 'bottom' (001) surfaces. We spectroscopically map the top cleaved surface of Bi_2TeI, and crystallographic step edges therein. We show the existence of both two dimensional surface states which are susceptible to mirror symmetry breaking, as well as one dimensional channels that reside along the step edges. Their mutual coexistence on the step edge where both facets join is facilitated by momentum and energy segregation. Our observations of a dual topological insulator make way to additional pairing of other dual topology classes with distinct surface manifestations coexisting at their boundaries.

cond-mat.mes-hall↗

arXiv2017

Hot Electrons Regain Coherence in Semiconducting Nanowires

The higher the energy of a particle is above equilibrium the faster it relaxes due to the growing phase-space of available electronic states it can interact with. In the relaxation process phase coherence is lost, thus limiting high energy quantum control and manipulation. In one-dimensional systems high relaxation rates are expected to destabilize electronic quasiparticles. We show here that the decoherence induced by relaxation of hot electrons in one-dimensional semiconducting nanowires evolves non-monotonically with energy such that above a certain threshold hot-electrons regain stability with increasing energy. We directly observe this phenomenon by visualizing for the first time the interference patterns of the quasi-one-dimensional electrons using scanning tunneling microscopy. We visualize both the phase coherence length of the one-dimensional electrons, as well as their phase coherence time, captured by crystallographic Fabry-Perot resonators. A remarkable agreement with a theoretical model reveals that the non-monotonic behavior is driven by the unique manner in which one dimensional hot-electrons interact with the cold electrons occupying the Fermi-sea. This newly discovered relaxation profile suggests a high-energy regime for operating quantum applications that necessitate extended coherence or long thermalization times, and may stabilize electronic quasiparticles in one dimension.

cond-mat.mes-hall↗

arXiv2016

Visualizing "Fermi arcs" in the Weyl semimetal TaAs

One of the hallmarks of Weyl semi-metals is the existence of unusual topological surface states known as 'Fermi arcs' [1-3]. The formation of these states is guaranteed by the existence of bulk Weyl points with opposite chirality. Tantalum Arsenide (TaAs) [4-9], a member of the newly discovered family of Weyl semi-metals [4,5], harbors a host of non-topological ('trivial') surface states overlapping in energy with the predicted 12 'Fermi arcs'. This overlap poses a major challenge in identifying the signatures of the arcs [10]. Here we harness the inherently distinct spatial structure of trivial and Fermi arc states to visualize the Fermi arcs for the first time using scanning tunneling microscopy. We do so in four distinct ways, each of which highlights a different aspect of their unusual nature. We reveal their relatively isotropic scattering signature, their energy dispersion and its relation to the bulk Weyl points, their deep bulk penetration relative to that of non-topological surface states and their weak coupling to the atomic structure. The latter is obtained by accounting for the spatial structure of the Bloch wavefunction and its effect on the scattering properties of the electrons off lattice defects in general. It thus provides a novel analysis tool for the spectroscopic characterization of electronic wavefunctions using scanning tunneling microscopy.

cond-mat.mes-hall↗

arXiv2012

Interplay between ferromagnetism, surface states, and quantum corrections in a magnetically doped topological insulator

The breaking of time-reversal symmetry by ferromagnetism is predicted to yield profound changes to the electronic surface states of a topological insulator. Here, we report on a concerted set of structural, magnetic, electrical and spectroscopic measurements of \MBS thin films wherein photoemission and x-ray magnetic circular dichroism studies have recently shown surface ferromagnetism in the temperature range 15 K $\leq T \leq 100$ K, accompanied by a suppressed density of surface states at the Dirac point. Secondary ion mass spectroscopy and scanning tunneling microscopy reveal an inhomogeneous distribution of Mn atoms, with a tendency to segregate towards the sample surface. Magnetometry and anisotropic magnetoresistance measurements are insensitive to the high temperature ferromagnetism seen in surface studies, revealing instead a low temperature ferromagnetic phase at $T \lesssim 5$ K. The absence of both a magneto-optical Kerr effect and anomalous Hall effect suggests that this low temperature ferromagnetism is unlikely to be a homogeneous bulk phase but likely originates in nanoscale near-surface regions of the bulk where magnetic atoms segregate during sample growth. Although the samples are not ideal, with both bulk and surface contributions to electron transport, we measure a magnetoconductance whose behavior is qualitatively consistent with predictions that the opening of a gap in the Dirac spectrum drives quantum corrections to the conductance in topological insulators from the symplectic to the orthogonal class.

cond-mat.mtrl-sci↗

arXiv2011

Spatial Fluctuations of Helical Dirac Fermions on the Surface of Topological Insulators

Surfaces of topological insulators host a new class of states with Dirac dispersion and helical spin texture. Potential quantum computing and spintronic applications using these states require manipulation of their electronic properties at the Dirac energy of their band structure by inducing magnetism or superconductivity through doping and proximity effect. Yet, the response of these states near the Dirac energy in their band structure to various perturbations has remained unexplored. Here we use spectroscopic mapping with the scanning tunneling microscope to study their response to magnetic and non-magnetic bulk dopants in Bi2Te3 and Bi2Se3. Far from the Dirac energy helicity provides remarkable resilience to backscattering even in the presence of ferromagnetism. However, approaching the Dirac point, where the surface states' wavelength diverges bulk doping results in pronounced nanoscale spatial fluctuations of energy, momentum, and helicity. Our results and their connection with similar studies of Dirac electrons in graphene demonstrate that while backscattering and localization are absent for Dirac topological surface states, reducing charge defects is required for both tuning the chemical potential to Dirac energy and achieving high electrical mobility for these novel states.

cond-mat.mes-hall↗

arXiv2010

Transmission of topological surface states through surface barriers

Topological surface states are a class of novel electronic states that are of potential interest in quantum computing or spintronic applications. Unlike conventional two-dimensional electron states, these surface states are expected to be immune to localization and to overcome barriers caused by material imperfection. Previous experiments have demonstrated that topological surface states do not backscatter between equal and opposite momentum states, owing to their chiral spin texture. However, so far there is no evidence that these states in fact transmit through naturally occurring surface defects. Here we use a scanning tunnelling microscope to measure the transmission and reflection probabilities of topological surface states of antimony through naturally occurring crystalline steps separating atomic terraces. In contrast to nontopological surface states of common metals (copper, silver and gold), which are either reflected or absorbed by atomic steps, we show that topological surface states of antimony penetrate such barriers with high probability. This demonstration of the extended nature of antimony's topological surface states suggests that such states may be useful for high current transmission even in the presence of atomic scale irregularities-an electronic feature sought to efficiently interconnect nanoscale devices.

cond-mat.mes-hall↗

arXiv2008

Multiple Changes of Order of the Vortex Melting Transition in BSCCO with Dilute Columnar Defects

A low concentration of columnar defects is reported to transform a first-order vortex lattice melting line in BSCCO crystals into alternating segments of first-order and second-order transitions separated by two critical points. As the density of CDs is increased, the critical points shift apart and the range of the intermediate second-order transition expands. A third, low temperature critical point was also observed in one sample. The measurement of equilibrium magnetization and the mapping of the melting line down to 27K was made possible by employment of the shaking technique.

cond-mat.supr-con↗