arXiv subjects

Haixing Miao

Publications and source records attributed to Haixing Miao.

At least 19 recordsLinked to original sources

arXiv2026

Imaging Stars at the Quantum Compatibility Limit

Imaging astrophysical sources with a multi-station interferometer is intrinsically a multiparameter quantum-estimation problem. {Using tools from multiparameter quantum metrology,} we show that time-resolved repetitive or adaptive measurements in an $N$-station array suffer a fundamental array-level incompatibility among visibility estimators. Collective measurements, {which coherently process the received starlight across multiple time bins in a single joint readout}, remove the array-size penalty up to an order-unity factor, yielding an asymptotic $O(\sqrt{N})$ enhancement for the {directional-averaged} SNR of visibility measurement. We then propose a memory-assisted interferometric architecture designed to implement collective readout through coherent storage and joint quantum processing. Imaging simulations and Fisher-information analyses demonstrate that collective measurements improve image reconstruction in near-term arrays and enhance the resolving power of future long-baseline architectures, with pronounced benefits for representative AGN targets such as NGC~4151 and 3C~273. These results highlight collective measurement as a promising building block for future quantum-assisted interferometric arrays for stellar imaging.

quant-ph↗

arXiv2026

Torsional-X Seismometer for Lunar Decihertz Gravitational-Wave Detection

The lunar gravitational-wave antenna concept uses the Moon as a resonant detector instrumented with precision seismometers, targeting the decihertz band between ground- and space-based observatories. We propose a compact monolithic fused-silica torsional-X seismometer that re-engineers garden-gate acceleration-to-rotation transduction for this regime through a high-tension dual-fiber suspension. Its designed millihertz-scale resonance and ultra-low mechanical dissipation enable a nearly order-of-magnitude improvement around $0.1\,\mathrm{Hz}$ compared with existing lunar seismometer concepts. Achieving this performance requires room-temperature operation, where fused-silica exhibits low mechanical loss, together with subdominant actuation noise. We demonstrate a room-temperature vacuum prototype validating the operating principle and core mechanical design, and derive requirements for a future lunar implementation capable of approaching the target sensitivity.

astro-ph.IM↗

arXiv2026

Tomography of a Macroscopic Quantum State influenced by Classical Self-Gravity

Macroscopic optomechanical systems offer a promising testbed for distinguishing whether gravity acts as a quantum interaction or as a classical field. Schrodinger-Newton (SN) theory is the nonrelativistic limit of semi-classical gravity where quantum matter couples to classical gravity. Based on SN theory, this work investigates how classical self-gravity affects continuous quantum state tomography of a macroscopic mechanical oscillator monitored by variable-angle homodyne detection. In the Schrodinger-Newton (SN) theory, the measurement record arises from a different conditional test mass dynamics from that in quantum-gravity (QG)/standard quantum mechanics, consequently, applying the QG-optimised reconstruction map introduces an additional state-dependent contribution. We show that this contribution makes the reconstructed covariance depend on the chosen set of tomography angles and can drive the SN covariance--after QG filtering--outside the standard Gaussian-covariance domain set by the Heisenberg uncertainty principle. We quantify the resulting QG-SN distinguishability via the Hellinger distance and analyse its dependence on measurement strength and temperature. We then formulate the same issue in the broader setting of nonlinear quantum mechanics: when the system's conditional dynamics during the readout process depends on the state being inferred, the tomographic map acquires nonlinear, model-dependent corrections to the usual Radon or Gaussian reconstruction map.

quant-ph↗

arXiv2026

Fundamental quantum limits for detecting ultrahigh frequency gravitational waves

The ultrahigh-frequency (above 10 kHz) gravitational waves (GW) window provides a unique opportunity to detect primordial GWs, free from astrophysical foregrounds that dominate lower frequencies. A stochastic GW background in this range is generically predicted from cosmological phase transitions and topological defects associated with grand unification and other ultra-high energy theories. We establish a universal quantum limit framework for various detection schemes, setting a fundamental bound on GW detectability. Our analysis reveals that backgrounds in the kHz-MHz range are in principle observable, whereas higher-frequency signals lie below the quantum limit. These results offer theoretical guidance for future detector designs and open new avenues for probing early universe physics.

gr-qc↗

arXiv2026

Extending Ground-Based Gravitational-Wave Sensitivity to 5 Hz

Extending the sensitivity of terrestrial gravitational-wave detectors below 20 Hz is a long-standing challenge, limited by ground motion and inertial sensing noise. In this letter, we demonstrate ultra-high-vacuum compatible inertial isolation and position sensing technologies that achieve active platform stabilization down to 10 mHz. Our laser position sensors reach a sub-pm/$\sqrt{\rm Hz}$ sensitivity above 10 mHz, independent of the input light polarization, representing a 100-fold improvement over the current LIGO position sensors. In addition, our inertial sensors provide at least a factor of 5 improvement in low-frequency sensitivity compared to state-of-the-art commercial seismometers. We integrate these technologies into a LIGO-like interferometer model and predict a low-frequency sensitivity improvement of up to an order of magnitude at 10 Hz, with enhanced linearity and calibration stability. This extension increases the detection horizon for intermediate-mass black hole binaries of mass $10^3 M_\odot$ by a factor of 3. Our results provide the first experimental demonstration of a practical pathway to sub-10 Hz operation of terrestrial gravitational-wave detectors and establish key technologies for next-generation observatories such as Cosmic Explorer and Einstein Telescope.

astro-ph.IM↗

arXiv2026

DC response of an interferometer topology with an L-shaped cavity: a tabletop study

A new interferometer topology for kilohertz gravitational-wave detection was recently proposed in [Zhang et al. Phys. Rev. X 13, 021019 (2023)]. The design is based on an L-shaped optical cavity pumped through a Sagnac-like vortex. We report a tabletop experiment that characterizes the interferometer's optical response near DC. When the laser frequency is locked to the resonance of the L-shaped cavity, we observe that the cavity input coupler becomes effectively transparent, yielding a simple Michelson-like response. Moreover, the Sagnac vortex separates into upper and lower paths, which behave as two independent pumping paths driving the cavity. These observations are in agreement with theoretical predictions. Our results provide an intuitive physical picture of this interferometer topology and offer insight into its lock acquisition strategy.

physics.ins-det↗

arXiv2025

Direct Nuclear-Level Qubits using Trapped Th-229 Ions: A Platform for Entanglement and Universal Quantum Information Processing

The low-energy isomeric transition in Thorium-229 offers a unique interface between nuclear and atomic physics, presenting a resource for quantum technologies that is notably resilient to environmental decoherence. While early experiments focused on nuclei in solid-state crystals, the recent advent of a continuous-wave vacuum ultraviolet laser at 148.4~nm now enables direct coherent control of individual trapped Th-229 ions. Building on this breakthrough, we present a theoretical framework for utilizing trapped Th-229^{3+} ions as high-fidelity nuclear-level qubits, wherein quantum state preparation, single-qubit control, and entangling operations based on nuclear energy levels can all be efficiently realized. We analyze a scheme to generate entanglement between the nuclear isomeric states of two ions through phonon-mediated coupling, driven by optimized red- and blue-detuned laser sideband pulses. Our analysis, grounded in realistic experimental parameters, also demonstrates that high-fidelity entanglement is achievable, leveraging the nucleus's intrinsically long coherence times. These results provide a practical roadmap for developing nuclear-based quantum information processors and suggest that entangled nuclear-level qubits could potentially unlock new frontiers in precision metrology.

quant-ph↗

arXiv2025

First result for testing semiclassical gravity effect with a torsion balance

The Schrödinger-Newton equation, a theoretical framework connecting quantum mechanics with classical gravity, predicts that gravity may induce measurable deviations in low-frequency mechanical systems-an intriguing hypothesis at the frontier of fundamental physics. In this study, we developed and operated an advanced optomechanical platform to investigate these effects. The system integrates an optical cavity with finesse over 350000 and a torsion pendulum with an ultra-low eigenfrequency of 0.6mHz, achieving a high mechanical Q-factor exceeding 50000. We collected data for 3 months and reached a sensitivity of 0.3urad/rtHz at the Schrödinger-Newton frequency of 2.5mHz where deviations from the standard quantum mechanics may occur. While no evidence supporting semiclassical gravity was found, we identify key challenges in such tests and propose new experimental approaches to advance this line of inquiry. This work demonstrates the potential of precision optomechanics to probe the interplay between quantum mechanics and gravity.

quant-ph↗

arXiv2025

Beijing Normal University 12-meter Interferometric kHz GW Detector Prototype: Design and Scientific Prospects

Current gravitational-wave detectors have achieved remarkable sensitivity around 100 Hz, enabling ground-breaking discoveries. Enhancing sensitivity at higher frequencies in the kilohertz (kHz) range promises access to rich physics, particularly the extreme conditions during the merger stage of binary neutron stars. However, the high-frequency sensitivity of Michelson-based interferometers is fundamentally limited by their linear optical cavities, which are optimized for low-frequency signal enhancement. In [Phys. Rev. X 13, 021019 (2023)], a new configuration employing an L-shaped optical resonator was proposed to overcome this limitation, offering exceptional sensitivity in the kHz band. As a pathfinder, the 12-meter prototype at Beijing Normal University is designed to demonstrate the sensing and control schemes of this new kHz detector configuration and to explore its performance in the high-power regime with suspended optics. Beyond its primary scientific goal, the prototype also offers potential sensitivity in the megahertz (MHz) range, potentially enabling constraints on exotic sources. This paper presents an overview of the prototype, including its optical design and current development status of key components.

physics.optics↗

arXiv2025

Experiment demonstration of tilt-to-length coupling suppression by beam-alignment-mechanism

Tilt-to-length (TTL) noise, caused by angular jitter and misalignment, is a major noise source in the inter-satellite interferometer for gravitational wave detection. However, the required level of axis alignment of the optical components is beyond the current state of the art. A set of optical parallel plates, called beam alignment mechanism (BAM), is proposed by LISA to compensate for the alignment error. In this paper, we show a prototype design of the BAM and demonstrate its performance in a ground-based optical system. We derive the BAM theoretical model, which agrees well with the numerical simulation. Experimental results reveal that the BAM can achieve lateral displacement compensation of the optical axis with a resolution of \SI{1}{\micro\meter} across a \D{dynamic} range of about \SI{0.5}{\milli\meter}. Furthermore, the TTL coefficient is reduced from about \SI{0.3}{\milli\meter/\radian} to about \SI{5}{\micro\meter/\radian}, satisfying the preliminary requirements for LISA and TianQin. These findings confirm the efficacy of the BAM in suppressing TTL noise, offering a promising solution for space-based gravitational wave detection.

physics.ins-det↗

arXiv2025

Sensitivity and control of a 6-axis fused-silica seismometer

We present a pair of seismometers capable of measurement in all six axes of rigid motion. The vacuum-compatible devices implement compact interferometric displacement sensors to surpass the sensitivity of typical electrical readout schemes. Together with the capability to subtract the sensitivity-limiting coupling of ground tilt into horizontal motion, our seismometers can widen the sensing band towards mHz frequencies. This has notable applications across a range of fields requiring access to low-frequency signals, such as seismology and climate research. We particularly highlight their potential application in gravitational-wave observatories (LIGO) in improving their observation capability of intermediate-mass black holes ($\sim 1000\,M_\odot$). The sensors are based on a near-monolithic fused-silica design consisting of a fused-silica mass and fibre, showing improved stability and robustness to tilt drifts, alignment, and control compared to all-metal or mixed metal-silica designs. We demonstrate tilt sensitivity that surpasses the best commercial alternatives in a significantly reduced footprint compared to our previous iterations of these sensors.

physics.ins-det↗

arXiv2024

Merging L-shaped resonator with Michelson configuration for kilohertz gravitational-wave detection

Detection of gravitational waves in kilohertz frequency range is crucial for understanding the physical processes of binary neutron star mergers. In Ref. [Phys. Rev. X {\bf 13}, 021019 (2023)], a new interferometric configuration has been proposed, employing an L-shaped optical resonant cavity as arm cavity. This alteration enhances the detector's response to kHz signals. However, the departure from conventional Michelson configuration necessitates a redesign of its sensing and control scheme, which is currently under study. In this article, we propose replacing linear arm cavities in the conventional Michelson by the L-shaped resonator. This hybrid configuration features an enhanced response at kHz while retaining the same sensing and control scheme as the Michelson setup. At the conceptual level, it exhibits higher sensitivity in the 2-4 kHz range compared to existing configurations.

gr-qc↗

arXiv2024

Updating the constraint on the quantum collapse models via kilogram masses

Quantum mechanics, which governs all microscopic phenomena, encounters challenges when applied to macroscopic objects that exhibit classical behavior. To address this micro-macro disparity, collapse models such as the Continuous Spontaneous Localization (CSL) and Diosi-Penrose (DP) models have been proposed. These models phenomenologically modify quantum theory to reconcile its predictions with the observed classical behavior of macroscopic systems. Based on previous works\,([Phys.\,Rev\,D,\,95(8):084054\,(2017)] and [Phys.\,Rev.\,D,\,94:124036,\,(2016)]), an improved bound on the collapse model parameters is given using the updated acceleration noise data released from LISA Pathfinder\,([Phys.\,Rev.\,D, 110(4):042004,\,(2024)]). The CSL collapse rate is bounded to be at most $λ_{\rm CSL} \leq 8.3\times 10^{-11}$\,$s^{-1}$ at the mili-Hertz band when $r_{\rm CSL}=10^{-7}\,{\rm m}$, and the DP model's regularization cut-off scale is constraint to be $σ_{\rm DP}\sim 285.5$\,fm. Furthermore, we discuss the potential advantages of using deep-underground laboratories to test these quantum collapse models. Our results show the quiet seismic condition of the current deep-underground laboratory has the potential to further constrain the CSL collapse model to $λ_{\rm CSL}\leq3\times 10^{-11}\,{\rm s}^{-1}$ when $r_{\rm CSL}=10^{-7}\,{\rm m}$.

quant-ph↗

arXiv2023

Sensing and control scheme for the inteferometer configuration with an L-shaped resonator

The detection of high-frequency gravitational waves around kHz is critical to understanding the physics of binary neutron star mergers. A new interferometer design has been proposed in [Phys. Rev. X {\bf 13}, 021019 (2023)], featuring an L-shaped optical resonator as the arm cavity, which resonantly enhances kHz gravitational-wave signals. This new configuration has the potential to achieve better high-frequency sensitivity than the dual-recycled Fabry-Perot Michelson. In this article, we propose a sensing and control scheme for this configuration. Despite having the same number of length degrees of freedom as the dual-recycled Fabry-Perot Michelson, the new configuration requires one less degree of freedom to be controlled due to the degeneracy of two length degrees of freedom at low frequencies. We has also shown that introducing the Schnupp asymmetry is ineffective for controlling the signal-recycling cavity length. Therefore, we propose adding control fields from the dark port to control this auxiliary degree of freedom.

astro-ph.IM↗

arXiv2023

Proposal for Sequential Stern-Gerlach Experiment with Programmable Quantum Processors

The historical significance of the Stern-Gerlach experiment lies in its provision of the initial evidence for space quantization. Over time, its sequential form has evolved into an elegant paradigm that effectively illustrates the fundamental principles of quantum theory. To date, the practical implementation of the sequential Stern-Gerlach experiment has not been fully achieved. In this study, we demonstrate the capability of programmable quantum processors to simulate the sequential Stern-Gerlach experiment. The specific parametric shallow quantum circuits, which are suitable for the limitations of current noisy quantum hardware, are given to replicate the functionality of Stern-Gerlach devices with the ability to perform measurements in different directions. Surprisingly, it has been demonstrated that Wigner's Stern-Gerlach interferometer can be readily implemented in our sequential quantum circuit. With the utilization of the identical circuits, it is also feasible to implement Wheeler's delayed-choice experiment. We propose the utilization of cross-shaped programmable quantum processors to showcase sequential experiments, and the simulation results demonstrate a strong alignment with theoretical predictions. With the rapid advancement of cloud-based quantum computing, such as BAQIS Quafu, it is our belief that the proposed solution is well-suited for deployment on the cloud, allowing for public accessibility. Our findings not only expand the potential applications of quantum computers, but also contribute to a deeper comprehension of the fundamental principles underlying quantum theory.

quant-ph↗

arXiv2023

Adaptive protocols for SU(11) interferometers to achieve ab initio phase estimation at the Heisenberg limit

The precision of phase estimation with interferometers can be greatly enhanced using non-classical quantum states, and the SU(11) interferometer is an elegant scheme, which generates two-mode squeezed state internally and also amplifies the signal. It has been shown in [Phys. Rev. A {\bf 95}, 063843 (2017)] that the photon-number measurement can achieve the Heisenberg limit, but only for estimating a small phase shift. We relax the constraint on the phase size by considering two adaptive protocols: one also uses the photon-number measurement with a specially tuned sequence of feedback phase; the other implements the yet-to-be-realised optimal measurement but without fine tuning.

quant-ph↗

arXiv2023

On the noise effect of test mass surface roughness in spaceborne gravitational wave detectors

Spaceborne gravitational wave detection mission has a demanding requirement for the precision of displacement sensing, which is conducted by the interaction between the laser field and test mass. However, due to the roughness of the reflecting surface of the test mass, the displacement measurement along the sensitive axis suffers a coupling error caused by the residue motion of other degrees of freedom. In this article, we model the coupling of the test mass residue random motion to the displacement sensing along the sensitive axis and derived an analytical formula of the required precision of the surface error for the spaceborne gravitational wave detectors. Our result shows that this coupling error will not contaminate the picometer displacement sensing for the test masses in the LISA pathfinder.

physics.ins-det↗

arXiv2023

A Gravitational Wave Detector for Post Merger Neutron Stars: Beyond the Quantum Loss Limit of Michelson Fabry Perot Interferometer

Advanced gravitational-wave detectors that have made groundbreaking discoveries are Michelson interferometers with resonating optical cavities as their arms. As light travels at finite speed, these cavities are optimal for enhancing signals at frequencies below their bandwidth frequency. A small amount of optical loss will, however, significantly impact the high-frequency signals which are not optimally amplified. We find an elegant interferometer configuration with an "L-resonator" as the core, significantly surpassing the loss limited sensitivity of dual recycled Fabry Perot Michelson interferometers at high frequencies. Following this concept, we provide a broadband design of a 25 km detector with outstanding sensitivity between 2-4 kHz. We have performed Monte-Carlo population studies of binary neutron star mergers, given the most recent merger rate from the GWTC-3 catalog and several representative neutron star equations of state. We find that the new interferometer configuration significantly outperforms other third-generation detectors by a factor of 3 to 7 in the signal-to-noise ratio of the post-merger signal. Assuming a detection threshold with signal-to-noise ratio >5 and for the cases we have explored, the new design is the only detector that confidently achieves a detection rate larger than one per year, with the rate being 1 to 30 events per year.

gr-qc↗