arXiv subjects

Haiyang Bai

Publications and source records attributed to Haiyang Bai.

7 recordsLinked to original sources

arXiv2026

Universal scaling laws for dynamical-thermal hysteresis

Dynamic hysteresis, the rate-dependent lagged response of materials to external fields, underpins applications from energy-efficient transformers to gas storage systems. A fundamental yet unresolved question is how the hysteresis loop area $A$ scales with the field sweep rate $R$. Here, we reveal that a competition between the field sweep and thermal fluctuations governs a universal crossover between two scaling regimes: $A - A_0 \propto R^{1/3}$ for $R < R^*$ and $A - A_0 \propto R^{2/3}$ for $R > R^*$, where $A_0$ is the quasi-static area and the crossover rate $R^* \propto T/T_c$ depends on the temperature $T$ and the material's critical temperature $T_c$. We demonstrate these scaling laws universally across experiments of magnetic materials, simulations of Ising and metal-organic framework models, and analytical solutions of a stochastic Langevin equation. This framework not only resolves the long-standing non-universality of reported scaling exponents but also provides a direct design principle for the application of dynamic hysteresis.

cond-mat.stat-mech↗

arXiv2025

Combinatorial Development of Amorphous/nanocrystalline Biphase Soft Magnetic Alloys with Silicon-steel like Saturated Magnetic Induction

Maximization saturation magnetic induction (Bs) of soft magnetic alloys is essential for the high power-density electromagnetic devices. However, identifying the alloy compositions with high Bs often replies on the lab-intensive melt casting method and a high-throughput characterization on magnetic properties remains challenging. Here, we develop a new combinatorial method for fast screening alloys with optimal soft magnetic properties based on the high-throughput MOKE screening method. Based on the combinatorial method, we found that the alloys with a combination of high Bs and low coercivity (Hc) tend to have a feature of amorphous-nanocrystalline biphase microstructure. We also identified an amorphous/nanocrystalline alloy film with the composition the Fe68.09Co17.02B10.9Si4, exhibiting an ultra-high Bs up to 2.02 T that surpasses all amorphous/nanocrystalline alloys reported so far and is comparable to that of silicon steels, together with a high resistivity of 882 {\mu}{\Omega} {\dot} cm, about 17 times of silicon steels. Our high-throughput magnetic screening method provides a paradigm for understanding the relationship between microstructure and magnetic properties and the development of the next-generation soft magnetic materials.

cond-mat.mtrl-sci↗

arXiv2025

GaRe: Relightable 3D Gaussian Splatting for Outdoor Scenes from Unconstrained Photo Collections

We propose a 3D Gaussian splatting-based framework for outdoor relighting that leverages intrinsic image decomposition to precisely integrate sunlight, sky radiance, and indirect lighting from unconstrained photo collections. Unlike prior methods that compress the per-image global illumination into a single latent vector, our approach enables simultaneously diverse shading manipulation and the generation of dynamic shadow effects. This is achieved through three key innovations: (1) a residual-based sun visibility extraction method to accurately separate direct sunlight effects, (2) a region-based supervision framework with a structural consistency loss for physically interpretable and coherent illumination decomposition, and (3) a ray-tracing-based technique for realistic shadow simulation. Extensive experiments demonstrate that our framework synthesizes novel views with competitive fidelity against state-of-the-art relighting solutions and produces more natural and multifaceted illumination and shadow effects.

cs.CV↗

arXiv2024

Stress-tunable abilities of glass forming and mechanical amorphization

Mechanical amorphization, a widely observed phenomenon, has been utilized to synthesize novel phases by inducing disorder through external loading, thereby expanding the realm of glass-forming systems. Empirically, it has been plausible that mechanical amorphization ability consistently correlates with glass-forming ability. However, through a comprehensive investigation in binary, ternary, and quaternary systems combining neutron diffraction, calorimetric experimental approaches and molecular dynamics simulation, we demonstrate that this impression is only partly true and we reveal that the mechanical amorphization ability can be inversely correlated with the glass forming ability in certain cases To provide insights into these intriguing findings, we present a stress-dependent nucleation theory that offers a coherent explanation for both experimental and simulation results. Our study identifies the intensity of mechanical work, contributed by external stress, as the key control parameter for mechanical amorphization, rendering the ability to tune this process. This discovery not only unravels the underlying correlation between mechanical amorphization and glass-forming ability but also provides a pathway for the design and discovery of new amorphous phases with tailored properties.

cond-mat.mtrl-sci↗

arXiv2023

Ultra-small topological spin textures with size of 1.3nm at above room temperature in Fe78Si9B13 amorphous alloy

Topologically protected spin textures, such as skyrmions1,2 and vortices3,4, are robust against perturbations, serving as the building blocks for a range of topological devices5-9. In order to implement these topological devices, it is necessary to find ultra-small topological spin textures at room temperature, because small size implies the higher topological charge density, stronger signal of topological transport10,11 and the higher memory density or integration for topological quantum devices5-9. However, finding ultra-small topological spin textures at high temperatures is still a great challenge up to now. Here we find ultra-small topological spin textures in Fe78Si9B13 amorphous alloy. We measured a large topological Hall effect (THE) up to above room temperature, indicating the existence of highly densed and ultra-small topological spin textures in the samples. Further measurements by small-angle neutron scattering (SANS) reveal that the average size of ultra-small magnetic texture is around 1.3nm. Our Monte Carlo simulations show that such ultra-small spin texture is topologically equivalent to skyrmions, which originate from competing frustration and Dzyaloshinskii-Moriya interaction12,13 coming from amorphous structure14-17. Taking a single topological spin texture as one bit and ignoring the distance between them, we evaluated the ideal memory density of Fe78Si9B13, which reaches up to 4.44*104 gigabits (43.4 TB) per in2 and is 2 times of the value of GdRu2Si218 at 5K. More important, such high memory density can be obtained at above room temperature, which is 4 orders of magnitude larger than the value of other materials at the same temperature. These findings provide a unique candidate for magnetic memory devices with ultra-high density.

cond-mat.mtrl-sci↗

arXiv2022

Atomic-scale Deformation Process of Glasses Unveiled by Stress-induced Structural Anisotropy

Experimentally resolving atomic-scale structural changes of a deformed glass remains challenging owing to the disordered nature of glass structure. Here, we show that the structural anisotropy emerges as a general hallmark for different types of glasses (metallic glasses, oxide glass, amorphous selenium, and polymer glass) after thermo-mechanical deformation, and it is highly correlates with local nonaffine atomic displacements detected by the high-energy X-ray diffraction technique. By analyzing the anisotropic pair density function, we unveil the atomic-level mechanism responsible for the plastic flow, which notably differs between metallic glasses and covalent glasses. The structural rearrangements in metallic glasses are mediated through cutting and formation of atomic bonds, which occurs in some localized inelastic regions embedded in elastic matrix, whereas that of covalent glasses is mediated through the rotation of atomic bonds or chains without bond length change, which occurs in a less localized manner.

cond-mat.mtrl-sci↗

arXiv2021

Linear magnetization dependence and large intrinsic anomalous Hall effect in Fe78Si9B13 metallic glasses

The origin of anomalous Hall effect (AHE) in ferromagnetic metallic glasses (MGs) is not yet understood completely. Here, the AHE is explored in Fe78Si9B13 MGs. We find the behavior of resistivity at low temperature seems to be more likely due to structure effect rather than Kondo-type effect. More importantly, we firstly find the primitive experiment anomalous Hall conductivity (σAH) without separation of extrinsic contribution has a linear magnetization (Mz) dependence when temperature is changing, which is another feature of intrinsic mechanism and indicates intrinsic contribution is dominated. Furthermore, the σAH normalized by Mz is independent of longitudinal conductivity (σxx), which shows the characteristic of dissipationless intrinsic mechanism. We suggest the intrinsic contribution can be understood from the density of Berry curvature integrated over occupied energies proposed for aperiodic materials recently, and the linear magnetization dependence can be understood qualitatively from the fluctuations of spin orientation and the proportional relationship between Berry curvature and magnetization. Moreover, based on the recent theory report of topological amorphous metals, we make a prediction that the large intrinsic σAH (616 S/cm) in Fe78Si9B13 MGs implies some topological properties of MGs waiting for further discovery.

cond-mat.mtrl-sci↗