arXiv subjects

Hajun Kim

Publications and source records attributed to Hajun Kim.

9 recordsLinked to original sources

arXiv2026

GAIT: Legged Robot Proprioceptive State Estimation with Attention over Inertial-Leg Tokens

In this paper, we propose a method that applies Inertial-Leg (IL) tokenization to an attention-based network for proprioceptive state estimation in legged robots. Unlike existing learning-based state estimators that concatenate all sensor measurements into a single flat vector, the proposed architecture represents inertial measurements and leg-wise measurements as individual tokens and uses an attention mechanism to learn the relative importance of each measurement.This design allows the network to reweight each measurement according to the current contact condition, reflecting the fact that the reliability of forward kinematic measurements depends on whether the corresponding foot is in contact. Unlike conventional contact-aided estimators, however, the proposed method learns this behavior without relying on an explicit contact estimator or on explicit measurement updates based on a stationary contact assumption. To validate the proposed method, we conducted experiments on a Unitree Go1 robot, including debris terrain not modeled in simulation and gait patterns not seen during training. Experimental results show that the proposed method achieves better estimation performance than existing learning-based state estimators under unseen gait patterns and also improves performance over contact-aided model-based methods.

cs.RO↗

arXiv2025

Dynamic Policy Learning for Legged Robot with Simplified Model Pretraining and Model-Homotopy-Inspired Transfer

Generating dynamic motions for legged robots remains a challenging problem. While reinforcement learning has achieved notable success in various legged locomotion tasks, producing highly dynamic behaviors often requires extensive reward tuning or high-quality demonstrations. Leveraging reduced-order models can help mitigate these challenges. However, the model discrepancy poses a significant challenge when transferring policies to full-body dynamics environments. In this work, we introduce a continuation-based learning framework that combines simplified model pretraining and model-homotopy-inspired transfer to efficiently generate and refine complex dynamic behaviors. First, we pretrain the policy using a single rigid body model to capture core motion patterns in a simplified environment. Next, we employ a continuation strategy to progressively transfer the policy to the full-body environment, minimizing performance loss. To define the continuation path, we introduce a parametric transition path from the single rigid body model to the full-body model by gradually redistributing mass and inertia between the trunk and legs. The proposed method achieves faster convergence and demonstrates superior stability during the transfer process compared to baseline methods. Our framework is validated on a range of dynamic tasks, including flips and wall-assisted maneuvers, and is successfully deployed on a real quadrupedal robot.

cs.RO↗

arXiv2025

Beyond Fixed and Dynamic Prompts: Embedded Jailbreak Templates for Advancing LLM Security

As the use of large language models (LLMs) continues to expand, ensuring their safety and robustness has become a critical challenge. In particular, jailbreak attacks that bypass built-in safety mechanisms are increasingly recognized as a tangible threat across industries, driving the need for diverse templates to support red-teaming efforts and strengthen defensive techniques. However, current approaches predominantly rely on two limited strategies: (i) substituting harmful queries into fixed templates, and (ii) having the LLM generate entire templates, which often compromises intent clarity and reproductibility. To address this gap, this paper introduces the Embedded Jailbreak Template, which preserves the structure of existing templates while naturally embedding harmful queries within their context. We further propose a progressive prompt-engineering methodology to ensure template quality and consistency, alongside standardized protocols for generation and evaluation. Together, these contributions provide a benchmark that more accurately reflects real-world usage scenarios and harmful intent, facilitating its application in red-teaming and policy regression testing.

cs.CR↗

arXiv2025

Dynamically-Consistent Trajectory Optimization for Legged Robots via Contact Point Decomposition

To generate reliable motion for legged robots through trajectory optimization, it is crucial to simultaneously compute the robot's path and contact sequence, as well as accurately consider the dynamics in the problem formulation. In this paper, we present a phase-based trajectory optimization that ensures the feasibility of translational dynamics and friction cone constraints throughout the entire trajectory. Specifically, our approach leverages the superposition properties of linear differential equations to decouple the translational dynamics for each contact point, which operates under different phase sequences. Furthermore, we utilize the differentiation matrix of B{\'e}zier polynomials to derive an analytical relationship between the robot's position and force, thereby ensuring the consistent satisfaction of translational dynamics. Additionally, by exploiting the convex closure property of B{\'e}zier polynomials, our method ensures compliance with friction cone constraints. Using the aforementioned approach, the proposed trajectory optimization framework can generate dynamically reliable motions with various gait sequences for legged robots. We validate our framework using a quadruped robot model, focusing on the feasibility of dynamics and motion generation. The source code and additional materials are publicly available at our project page: https://sangmin11.github.io/Analytical_Dynamics_TO_Project/.

cs.RO↗

arXiv2025

Learning Impact-Rich Rotational Maneuvers via Centroidal Velocity Rewards and Sim-to-Real Techniques: A One-Leg Hopper Flip Case Study

Dynamic rotational maneuvers, such as front flips, inherently involve large angular momentum generation and intense impact forces, presenting major challenges for reinforcement learning and sim-to-real transfer. In this work, we propose a general framework for learning and deploying impact-rich, rotation-intensive behaviors through centroidal velocity-based rewards and actuator-aware sim-to-real techniques. We identify that conventional link-level reward formulations fail to induce true whole-body rotation and introduce a centroidal angular velocity reward that accurately captures system-wide rotational dynamics. To bridge the sim-to-real gap under extreme conditions, we model motor operating regions (MOR) and apply transmission load regularization to ensure realistic torque commands and mechanical robustness. Using the one-leg hopper front flip as a representative case study, we demonstrate the first successful hardware realization of a full front flip. Our results highlight that incorporating centroidal dynamics and actuator constraints is critical for reliably executing highly dynamic motions. A supplementary video is available at: https://youtu.be/atMAVI4s1RY

cs.RO↗

arXiv2025

A Modular Residual Learning Framework to Enhance Model-Based Approach for Robust Locomotion

This paper presents a novel approach that combines the advantages of both model-based and learning-based frameworks to achieve robust locomotion. The residual modules are integrated with each corresponding part of the model-based framework, a footstep planner and dynamic model designed using heuristics, to complement performance degradation caused by a model mismatch. By utilizing a modular structure and selecting the appropriate learning-based method for each residual module, our framework demonstrates improved control performance in environments with high uncertainty, while also achieving higher learning efficiency compared to baseline methods. Moreover, we observed that our proposed methodology not only enhances control performance but also provides additional benefits, such as making nominal controllers more robust to parameter tuning. To investigate the feasibility of our framework, we demonstrated residual modules combined with model predictive control in a real quadrupedal robot. Despite uncertainties beyond the simulation, the robot successfully maintains balance and tracks the commanded velocity.

cs.RO↗

arXiv2025

Design of a 3-DOF Hopping Robot with an Optimized Gearbox: An Intermediate Platform Toward Bipedal Robots

This paper presents a 3-DOF hopping robot with a human-like lower-limb joint configuration and a flat foot, capable of performing dynamic and repetitive jumping motions. To achieve both high torque output and a large hollow shaft diameter for efficient cable routing, a compact 3K compound planetary gearbox was designed using mixed-integer nonlinear programming for gear tooth optimization. To meet performance requirements within the constrained joint geometry, all major components-including the actuator, motor driver, and communication interface-were custom-designed. The robot weighs 12.45 kg, including a dummy mass, and measures 840 mm in length when the knee joint is fully extended. A reinforcement learning-based controller was employed, and robot's performance was validated through hardware experiments, demonstrating stable and repetitive hopping motions in response to user inputs. These experimental results indicate that the platform serves as a solid foundation for future bipedal robot development.

cs.RO↗

arXiv2025

Multi-Sensor Fusion for Quadruped Robot State Estimation using Invariant Filtering and Smoothing

This letter introduces two multi-sensor state estimation frameworks for quadruped robots, built on the Invariant Extended Kalman Filter (InEKF) and Invariant Smoother (IS). The proposed methods, named E-InEKF and E-IS, fuse kinematics, IMU, LiDAR, and GPS data to mitigate position drift, particularly along the z-axis, a common issue in proprioceptive-based approaches. We derived observation models that satisfy group-affine properties to integrate LiDAR odometry and GPS into InEKF and IS. LiDAR odometry is incorporated using Iterative Closest Point (ICP) registration on a parallel thread, preserving the computational efficiency of proprioceptive-based state estimation. We evaluate E-InEKF and E-IS with and without exteroceptive sensors, benchmarking them against LiDAR-based odometry methods in indoor and outdoor experiments using the KAIST HOUND2 robot. Our methods achieve lower Relative Position Errors (RPE) and significantly reduce Absolute Trajectory Error (ATE), with improvements of up to 28% indoors and 40% outdoors compared to LIO-SAM and FAST-LIO2. Additionally, we compare E-InEKF and E-IS in terms of computational efficiency and accuracy.

cs.RO↗

arXiv2025

Online Friction Coefficient Identification for Legged Robots on Slippery Terrain Using Smoothed Contact Gradients

This paper proposes an online friction coefficient identification framework for legged robots on slippery terrain. The approach formulates the optimization problem to minimize the sum of residuals between actual and predicted states parameterized by the friction coefficient in rigid body contact dynamics. Notably, the proposed framework leverages the analytic smoothed gradient of contact impulses, obtained by smoothing the complementarity condition of Coulomb friction, to solve the issue of non-informative gradients induced from the nonsmooth contact dynamics. Moreover, we introduce the rejection method to filter out data with high normal contact velocity following contact initiations during friction coefficient identification for legged robots. To validate the proposed framework, we conduct the experiments using a quadrupedal robot platform, KAIST HOUND, on slippery and nonslippery terrain. We observe that our framework achieves fast and consistent friction coefficient identification within various initial conditions.

cs.RO↗