arXiv subjects

Hamed Sattari

Publications and source records attributed to Hamed Sattari.

8 recordsLinked to original sources

arXiv2026

Enhancing broadband second harmonic generation in a thin film lithium niobate racetrack resonator with tunable-coupling

Second harmonic generation in thin film periodically poled lithium niobate (PPLN) is constrained by an efficiency-bandwidth trade-off and fabrication-sensitive scaling. We demonstrate a racetrack resonator incorporating a short PPLN section and a tunable Mach-Zehnder interferometer coupler that enables in situ control of the coupling condition, compensating fabrication tolerances and stabilizing operation near critical coupling. The telecom pump is resonantly enhanced, while the near-infrared second harmonic is generated in single pass, eliminating dual-resonance requirements. The device achieves a 35 times efficiency enhancement over a non-resonant structure while maintaining a 7 nm bandwidth. This architecture provides a robust platform for broadband integrated frequency doubling.

physics.optics↗

arXiv2025

High-purity frequency-degenerate photon pair generation via cascaded SFG/SPDC in thin film lithium niobate

Frequency-degenerate photon pairs generated using nonlinear photonic integrated devices are a crucial resource for scalable quantum information processing and metrology. However, their realization is hindered by unwanted parametric processes occurring within the same phase matching band, which degrade the signal-to-noise ratio and reduce the purity of the associated quantum states. Here, we propose a dual-pump scheme to produce frequency-degenerate photon pairs, based on cascaded sum-frequency generation and spontaneous parametric down-conversion occurring within a single waveguide, while strongly suppressing parasitic photon pair generation from single-pump processes. This approach significantly simplifies the design compared to microresonator-based methods and enables both pumping and collection of photon pairs entirely in the telecom band. We experimentally validate the concept in a layer-poled thin film lithium niobate waveguide, achieving frequency-degenerate photon pair generation with a brightness of \SI{1.0(3)e5}{\hertz \per \nm \per \square \milli \watt } and a 40 dB suppression of unwanted single-pump processes.

quant-ph↗

arXiv2024

Ultrabroadband tunable difference frequency generation in standardized thin-film lithium niobate platform

Thin-film lithium niobate (TFLN) on insulator is a promising platform for nonlinear photonic integrated circuits (PICs) due to its strong light confinement, high second-order nonlinearity, and flexible quasi-phase matching for three-wave mixing processes via periodic poling. Among the three-wave mixing processes of interest, difference frequency generation (DFG) can produce long wave infrared (IR) light from readily available near IR inputs. While broadband DFG is well studied for mid-IR frequencies, achieving broadband idler generation within the telecom window (near C-band) and the short-wave infrared (near 2 micron) is more challenging due to stringent dispersion profile requirements, especially when using standardized TFLN thicknesses. In this paper, we investigate various standard waveguide designs to pinpoint favorable conditions for broadband DFG operation covering several telecom bands. Our simulations identify viable designs with a possible 3-dB conversion efficiency bandwidth (CE-BW) of 300 nm and our measurements show idler generation from 1418 nm to 1740 nm, limited by our available sources, experimentally confirming our design approach. Furthermore, temperature tuning allows further shift of the idler towards the mid-IR, up to 1819 nm. We also achieve a stretched wavelength range of idler generation by leveraging the longitudinal variation of the waveguide in addition to poling. Finally, our numerical simulations show the possibility of extending the CE-BW up to 780 nm while focusing on waveguide cross-sections that are available for fabrication within a foundry. Our work provides a methodology that bridges the deviations between fabricated and designed cross-sections, paving a way for standardized broadband DFG building blocks.

physics.optics↗

arXiv2024

An integrated photonic engine for programmable atomic control

Solutions for scalable, high-performance optical control are important for the development of scaled atom-based quantum technologies. Modulation of many individual optical beams is central to the application of arbitrary gate and control sequences on arrays of atoms or atom-like systems. At telecom wavelengths, miniaturization of optical components via photonic integration has pushed the scale and performance of classical and quantum optics far beyond the limitations of bulk devices. However, these material platforms for high-speed telecom integrated photonics are not transparent at the short wavelengths required by leading atomic systems. Here, we propose and implement a scalable and reconfigurable photonic architecture for multi-channel quantum control using integrated, visible-light modulators based on thin-film lithium niobate. Our approach combines techniques in free-space optics, holography, and control theory together with a sixteen-channel integrated photonic device to stabilize temporal and cross-channel power deviations and enable precise and uniform control. Applying this device to a homogeneous constellation of silicon-vacancy artificial atoms in diamond, we present techniques to spatially and spectrally address a dynamically-selectable set of these stochastically-positioned point emitters. We anticipate that this scalable and reconfigurable optical architecture will lead to systems that could enable parallel individual programmability of large many-body atomic systems, which is a critical step towards universal quantum computation on such hardware.

quant-ph↗

arXiv2024

Single-photon detectors on arbitrary photonic substrates

Detecting non-classical light is a central requirement for photonics-based quantum technologies. Unrivaled high efficiencies and low dark counts have positioned superconducting nanowire single photon detectors (SNSPDs) as the leading detector technology for fiber and integrated photonic applications. However, a central challenge lies in their integration within photonic integrated circuits regardless of material platform or surface topography. Here, we introduce a method based on transfer printing that overcomes these constraints and allows for the integration of SNSPDs onto arbitrary photonic substrates. We prove this by integrating SNSPDs and showing through-waveguide single-photon detection in commercially manufactured silicon and lithium niobate on insulator integrated photonic circuits. Our method eliminates bottlenecks to the integration of high-quality single-photon detectors, turning them into a versatile and accessible building block for scalable quantum information processing.

quant-ph↗

arXiv2023

Photonic crystal cavity IQ modulators in thin-film lithium niobate for coherent communications

Thin-Film Lithium Niobate (TFLN) is an emerging integrated photonic platform showing great promise due to its large second-order nonlinearity at microwave and optical frequencies, cryogenic compatibility, large piezoelectric response, and low optical loss at visible and near-infrared wavelengths. These properties enabled Mach-Zehnder interferometer-based devices to demonstrate amplitude- and in-phase/quadrature (IQ) modulation at voltage levels compatible with complementary metal-oxide-semiconductor (CMOS) electronics. Maintaining low-voltage operation requires centimeter-scale device lengths, making it challenging to realize the large-scale circuits required by ever-increasing bandwidth demands in data communications. Reduced device sizes reaching the 10 um scale are possible with photonic crystal (PhC) cavities. So far, their operation has been limited to modulation of amplitudes and required circulators or lacked cascadability. Here, we demonstrate a compact IQ modulator using two PhC cavities operating as phase shifters in a Fabry-Perot-enhanced Michelson interferometer configuration. It supports cascadable amplitude and phase modulation at GHz bandwidths with CMOS-compatible voltages. While the bandwidth limitation of resonant devices is often considered detrimental, their compactness enables dense co-integration with CMOS electronics where clock-rate-level operation (few GHz) removes power-hungry electrical time-multiplexing. Recent demonstrations of chip-scale transceivers with dense-wavelength division multiplied transceivers could be monolithically implemented and driven toward ultimate information densities using TFLN electro-optic frequency combs and our PhC IQ modulators.

physics.optics↗

arXiv2022

MEMS for Photonic Integrated Circuits

The field of microelectromechanical Systems (MEMS) for photonic integrated circuits (PICs) is reviewed. This field leverages mechanics at the nanometer to micrometer scale to improve existing components and introduce novel functionalities in PICs. This review covers the MEMS actuation principles and the mechanical tuning mechanisms for integrated photonics. The state of the art of MEMS tunable components in PICs is quantitatively reviewed and critically assessed with respect to suitability for large-scale integration in existing PIC technology platforms. MEMS provide a powerful approach to overcome current limitations in PIC technologies and to enable a new design dimension with a wide range of applications.

physics.optics↗

arXiv2021

Stable and compact RF-to-optical link using lithium niobate on insulator waveguides

Optical frequency combs have become a very powerful tool in metrology and beyond thanks to their ability to link radio frequencies with optical frequencies via a process known as self-referencing. Typical self-referencing is accomplished in two steps: the generation of an octave-spanning supercontinuum spectrum and the frequency-doubling of one part of that spectrum. Traditionally, these two steps have been performed by two separate optical components. With the advent of photonic integrated circuits, the combination of these two steps has become possible in a single small and monolithic chip. One photonic integrated circuit platform very well suited for on-chip self-referencing is lithium niobate on insulator - a platform characterised by high second and third order nonlinearities. Here we show that combining a lithium niobate on insulator waveguide with a silicon photodiode results in a very compact and direct low-noise path towards self-referencing of mode-locked lasers. Using digital servo electronics the resulting frequency comb is fully stabilized. Its high degree of stability is verified with an independent out-of-loop measurement and is quantified to be 6.8 mHz. Furthermore, we show that the spectrum generated inside the lithium niobate waveguide remains stable over many hours.

physics.app-ph↗