arXiv subjects

Hamid Reza Hashempour

Publications and source records attributed to Hamid Reza Hashempour.

10 recordsLinked to original sources

arXiv2026

DRL-Based Spectrum Sharing for RIS-Aided Local High-Quality Wireless Networks

This paper investigates a smart spectrum-sharing framework for reconfigurable intelligent surface (RIS)-aided local high-quality wireless networks (LHQWNs) within a mobile network operator (MNO) ecosystem. Although RISs are often considered harmful due to interference, this work shows that properly controlled RISs can enhance quality of service (QoS). The proposed system enables temporary spectrum access for multiple vertical service providers (VSPs) by dynamically allocating radio resources. The spectrum is divided into dedicated subchannels assigned to individual VSPs and reusable subchannels shared among multiple VSPs, while RIS improves propagation conditions and zero-forcing (ZF) precoding is adopted at the multiantenna base station (BS) to cancel inter-user interference. We formulate a multi-VSP utility maximization problem that jointly optimizes subchannel assignment, transmit power, and RIS phase configuration while accounting for spectrum access costs, RIS leasing costs, and QoS constraints. The resulting mixed-integer non-linear program (MINLP) is modeled as a Markov decision process (MDP) and solved using deep reinforcement learning (DRL). Deep deterministic policy gradient (DDPG) and soft actor-critic (SAC) algorithms are developed and compared. Numerical results show that SAC generally outperforms DDPG in convergence, stability, and utility, particularly in larger-scale scenarios. In the reduced-scale ablation study, both joint DRL methods outperform the heuristic benchmark by at least 6.6% in final moving-average reward.

eess.SY↗

arXiv2026

Massive MIMO-OFDM ISAC for Sparse ISAR Imaging: Joint Power and Subcarrier Allocation

This paper investigates a massive multiple-input multiple-output (mMIMO) orthogonal frequency-division multiplexing (OFDM) framework for integrated sensing and communication (ISAC) with inverse synthetic aperture radar (ISAR) imaging, supporting applications such as the Internet of Things (IoT). A dual-function architecture combines communication precoding and dedicated sensing beamforming to enable simultaneous downlink communication and ISAR imaging. Due to intermittent pilot transmission and sparse sensing-subcarrier activation, the received echoes provide incomplete measurements, resulting in a sparse-aperture ISAR reconstruction problem. To address this issue, an adaptive reweighted two-dimensional alternating direction method of multipliers (ADMM) algorithm is developed for high-resolution image recovery from sparse observations. A joint resource-allocation framework is also proposed to optimize communication-subcarrier assignment, sensing-subcarrier selection, and transmit power allocation subject to communication quality-of-service and sensing constraints. Exploiting channel hardening, analytical full-band sensing benchmarks based solely on statistical channel state information (CSI) are derived for maximum-ratio (MR) and zero-forcing (ZF) precoding, while a soft actor-critic (SAC)-based method is developed for sparse-sensing resource allocation. Numerical results show that the proposed adaptive ADMM algorithm improves sparse ISAR reconstruction over conventional methods. The SAC-based design also achieves substantial gains in sum spectral efficiency over the full-band benchmarks while satisfying communication and sensing constraints, thereby revealing the tradeoff between ISAR reconstruction accuracy and communication spectral efficiency.

eess.SP↗

arXiv2026

Energy-Efficient Federated Learning with Relay-Assisted Aggregation in IIoT Networks

This paper presents an energy-efficient transmission framework for federated learning (FL) in industrial Internet of Things (IIoT) environments with strict latency and energy constraints. Machinery subnetworks (SNs) collaboratively train a global model by uploading local updates to an edge server (ES), either directly or via neighboring SNs acting as decode-and-forward relays. To enhance communication efficiency, relays perform partial aggregation before forwarding the models to the ES, significantly reducing overhead and training latency. We analyze the convergence behavior of this relay-assisted FL scheme. To address the inherent energy efficiency (EE) challenges, we decompose the original non-convex optimization problem into sub-problems addressing computation and communication energy separately. An SN grouping algorithm categorizes devices into single-hop and two-hop transmitters based on latency minimization, followed by a relay selection mechanism. To improve FL reliability, we further maximize the number of SNs that meet the roundwise delay constraint, promoting broader participation and improved convergence stability under practical IIoT data distributions. Transmit power levels are then optimized to maximize EE, and a sequential parametric convex approximation (SPCA) method is proposed for joint configuration of system parameters. We further extend the EE formulation to the imperfect channel state information (ICSI). Simulation results demonstrate that the proposed framework significantly enhances convergence speed, reduces outage probability from 10-2 in single-hop to 10-6 and achieves substantial energy savings, with the SPCA approach reducing energy consumption by at least 2x compared to unaggregated cooperation and up to 6x over single-hop transmission.

eess.SP↗

arXiv2026

Robust SAC-Enabled UAV-RIS Assisted Secure MISO Systems With Untrusted EH Receivers

Secure downlink transmission in UAV-assisted reconfigurable intelligent surface (RIS)-enabled multiuser MISO systems is challenging due to imperfect channel state information (CSI), untrusted energy-harvesting receivers (UEHRs), and the strong coupling among UAV deployment, transmit power control, and RIS configuration. In this paper, we study a secure UAV-assisted RIS-enabled multiuser MISO system with UEHRs, where a hovering UAV-mounted RIS is jointly optimized in terms of its location, transmit power allocation, and discrete RIS phase shifts. The objective is to maximize the worst-case secrecy energy efficiency (WCSEE) under imperfect CSI and practical discrete phase-shift constraints. The resulting problem is highly nonconvex due to the fractional objective, coupled design variables, discrete phase shifts, and CSI uncertainty. To address these challenges, we propose two complementary approaches. First, a block coordinate descent (BCD) framework combined with successive convex approximation (SCA) is developed to solve a secrecy energy efficiency (SEE) formulation, serving as a structured model-based benchmark. Second, for the more general WCSEE problem, we propose a tailored soft actor-critic (SAC) framework that captures the coupling among variables and avoids repeated iterative optimization. Simulation results show that the proposed SAC method consistently outperforms conventional optimization and deep reinforcement learning (DRL)-based benchmarks, including deep deterministic policy gradient (DDPG) and twin delayed deep deterministic policy gradient (TD3), while maintaining robustness to CSI uncertainty and stable performance across system configurations.

eess.SP↗

arXiv2026

Cell-Free Massive MIMO for Joint Communication and Proactive Monitoring

This paper introduces a novel joint communication and proactive monitoring (JCAM) system that simultaneously monitors multiple untrusted links and serves multiple legitimate users. The system leverages a cell-free massive multiple-input multiple-output (CF-mMIMO) architecture, where one subset of access points (APs) is dedicated to receiving signals from untrusted links, while another subset transmits data to legitimate users and jamming signals into the untrusted links. This dual functionality not only ensures reliable communication for legitimate users but also degrades the performance of untrusted links, thereby enhancing monitoring effectiveness. Closed-form expressions for the spectral efficiency (SE) of legitimate users and the monitoring success probability (MSP) are derived under partial zero-forcing (PZF) precoding/combining schemes with imperfect channel state information. Leveraging these expressions, we develop a simple yet effective AP mode assignment strategy that determines which APs perform downlink transmission and jamming, and which APs are dedicated to receiving signals from untrusted links. The objective is to maximize the MSP while satisfying predefined quality-of-service (QoS) requirements for all legitimate users. Numerical results show that the proposed mode assignment strategy significantly outperforms the benchmark, achieving up to a $32\%$ improvement in monitoring performance, while maintaining low computational complexity. Moreover, our proposed JCAM framework provides nearly a six-fold improvement in the minimum MSP over the co-located massive MIMO baseline.

eess.SP↗

arXiv2026

Energy-Efficient Federated Learning in Cooperative Communication within Factory Subnetworks

This paper investigates energy-efficient transmission protocols in relay-assisted federated learning (FL) setup within industrial subnetworks, considering latency and power constraints. In the subnetworks, devices collaborate to train a global model by transmitting their local models at the edge-enabled primary access (pAP) directly or via secondary access points (sAPs), which act as relays to optimize the training latency. We begin by formulating the energy efficiency problem for our proposed transmission protocol. Given its non-convex nature, we decompose it to minimize computational and transmission energy separately. First, we introduce an algorithm that categorizes devices into single-hop and two-hop groups to decrease transmission energy and then selects associated sAPs. Subsequently, we optimize the transmit power, aiming to maximize energy efficiency. To that end, we propose a Sequential Parametric Convex Approximation (SPCA) method to configure system parameters jointly. Numerical results demonstrate a significant reduction in outage probability and at least a twofold savings in total energy consumption, together with faster convergence, compared with single-hop transmission.

eess.SP↗

arXiv2026

Secure Rate-Splitting and RIS Beamforming with Untrusted Energy Harvesting Receivers

We consider a reconfigurable intelligent surface (RIS)-assisted heterogeneous network comprising legitimate information-harvesting receivers (IHRs) and untrusted energy-harvesting receivers (UEHRs). A multi-antenna base station (BS) transmits confidential information to IHRs while ensuring sufficient energy transfer to UEHRs that may attempt eavesdropping. To enhance physical-layer security, we propose a secure rate-splitting multiple access (RSMA) scheme aided by a UAV-mounted RIS. The objective is to maximize fairness-based secrecy energy efficiency (SEE). Owing to the non-convexity of the formulated problem, we develop an alternating optimization framework that jointly designs the common message allocation, active precoders, and RIS phase shifts under transmit power and energy harvesting constraints, leveraging sequential convex approximation (SCA). Simulation results demonstrate the scalability of the proposed algorithm and its superior SEE performance compared to space-division multiple access (SDMA) and non-orthogonal multiple access (NOMA) benchmarks.

eess.SP↗

arXiv2025

Fast and Robust LRSD-based SAR/ISAR Imaging and Decomposition

The earlier works in the context of low-rank-sparse-decomposition (LRSD)-driven stationary synthetic aperture radar (SAR) imaging have shown significant improvement in the reconstruction-decomposition process. Neither of the proposed frameworks, however, can achieve satisfactory performance when facing a platform residual phase error (PRPE) arising from the instability of airborne platforms. More importantly, in spite of the significance of real-time processing requirements in remote sensing applications, these prior works have only focused on enhancing the quality of the formed image, not reducing the computational burden. To address these two concerns, this article presents a fast and unified joint SAR imaging framework where the dominant sparse objects and low-rank features of the image background are decomposed and enhanced through a robust LRSD. In particular, our unified algorithm circumvents the tedious task of computing the inverse of large matrices for image formation and takes advantage of the recent advances in constrained quadratic programming to handle the unimodular constraint imposed due to the PRPE. Furthermore, we extend our approach to ISAR autofocusing and imaging. Specifically, due to the intrinsic sparsity of ISAR images, the LRSD framework is essentially tasked with the recovery of a sparse image. Several experiments based on synthetic and real data are presented to validate the superiority of the proposed method in terms of imaging quality and computational cost compared to the state-of-the-art methods.

eess.IV↗

arXiv2024

Power Efficient Cooperative Communication within IIoT Subnetworks: Relay or RIS?

The forthcoming sixth-generation (6G) industrial Internet-of-Things (IIoT) subnetworks are expected to support ultra-fast control communication cycles for numerous IoT devices. However, meeting the stringent requirements for low latency and high reliability poses significant challenges, particularly due to signal fading and physical obstructions. In this paper, we propose novel time division multiple access (TDMA) and frequency division multiple access (FDMA) communication protocols for cooperative transmission in IIoT subnetworks. These protocols leverage secondary access points (sAPs) as Decode-and-Forward (DF) and Amplify-and-Forward (AF) relays, enabling shorter cycle times while minimizing overall transmit power. A classification mechanism determines whether the highest-gain link for each IoT device is a single-hop or two-hop connection, and selects the corresponding sAP. We then formulate the problem of minimizing transmit power for DF/AF relaying while adhering to the delay and maximum power constraints. In the FDMA case, an additional constraint is introduced for bandwidth allocation to IoT devices during the first and second phases of cooperative transmission. To tackle the nonconvex problem, we employ the sequential parametric convex approximation (SPCA) method. We extend our analysis to a system model with reconfigurable intelligent surfaces (RISs), enabling transmission through direct and RIS-assisted channels, and optimizing for a multi-RIS scenario for comparative analysis. Simulation results show that our cooperative communication approach reduces the emitted power by up to 7.5 dB while maintaining an outage probability and a resource overflow rate below $10^{-6}$. While the RIS-based solution achieves greater power savings, the relay-based protocol outperforms RIS in terms of outage probability.

eess.SP↗

arXiv2024

Secure SWIPT in the Multiuser STAR-RIS Aided MISO Rate Splitting Downlink

Recently, simultaneously transmitting and reflecting reconfigurable intelligent surfaces (STAR-RISs) have emerged as a novel technology that provides 360 coverage and new degrees-of-freedom (DoFs). They are also capable of manipulating signal propagation and simultaneous wireless information and power transfer (SWIPT). This paper introduces a novel STAR-RIS-aided secure SWIPT system for downlink multiple input single output rate-splitting multiple access (RSMA) networks. The transmitter concurrently communicates with the information receivers (IRs) and sends energy to untrusted energy receivers (UERs). The UERs are also capable of wiretapping the IR streams. We assume that the channel state information (CSI) of the IRs is known at the information transmitter, but only imperfect CSI for the UERs is available at the energy transmitter. By exploiting RSMA, the base station splits the messages of the IRs into common and private parts. The former is encoded into a common stream that can be decoded by all IRs, while the private messages are individually decoded by their respective IRs. We find the precoders and STAR-RIS configuration that maximizes the achievable worst-case sum secrecy rate of the IRs under a total transmit power constraint, a sum energy constraint for the UERs, and subject to constraints on the transmission and reflection coefficients. The formulated problem is non-convex and has intricately coupled variables. To tackle this challenge, a suboptimal two-step iterative algorithm based on the sequential parametric convex approximation method is proposed. Simulations demonstrate that the RSMA-based algorithm implemented with a STAR-RIS enhances both the rate of confidential information transmission and the total spectral efficiency. Furthermore, our method surpasses the performance of both orthogonal multiple access (OMA) and non-OMA (NOMA).

cs.IT↗