arXiv subjects

Hamidreza Eivazi

Publications and source records attributed to Hamidreza Eivazi.

14 recordsLinked to original sources

arXiv2026

Physics-Informed Reduced-Order Operator Learning for Hyperelasticity in Continuum Micromechanics

Physics-informed operator learning is an attractive candidate for surrogate modeling of microstructures, especially in multiscale finite-element simulations. Its practical use, however, is often limited by the high cost of loss evaluation. We address this bottleneck by combining the Equilibrium Neural Operator (EquiNO) with the QR-based discrete empirical interpolation method (Q-DEIM). EquiNO learns only the modal coefficients of reduced displacement-fluctuation and first Piola-Kirchhoff stress representations built from periodic and divergence-free bases, thereby enforcing periodicity and mechanical equilibrium by construction. Q-DEIM then identifies a small set of spatial points through a column-pivoted QR factorization of the stress basis and restricts constitutive evaluations during training to these points alone. This makes full-batch second-order optimization practical for three-dimensional representative volume elements (RVEs). Homogenized first Piola-Kirchhoff stresses are recovered directly from the offline-averaged reduced stress modes, without the need to reconstruct the full stress field at inference time. We validate the framework on two three-dimensional finite-strain hyperelastic RVEs. Q-DEIM reduces the per-step training cost by roughly three orders of magnitude relative to full-field loss evaluation, while reduced homogenization achieves speed-up factors of order $10^3$ to $10^4$ over direct full-field computations. Despite relying on only a small number of offline snapshot loading paths for basis construction, the method accurately interpolates and extrapolates both microscopic stress fields and homogenized stresses, with prediction quality improving systematically as more snapshots are added.

physics.comp-ph↗

arXiv2026

EquiNO: A Physics-Informed Neural Operator for Multiscale Simulations

Multiscale problems are ubiquitous in physics. Numerical simulations of such problems by solving partial differential equations (PDEs) at high resolution are computationally too expensive for many-query scenarios, such as uncertainty quantification, remeshing applications, and topology optimization. This limitation has motivated the development of data-driven surrogate models, where microscale computations are substituted by black-box mappings between macroscale quantities. While these approaches offer significant speedups, they typically struggle to incorporate microscale physical constraints, such as the balance of linear momentum. In this contribution, we propose the Equilibrium Neural Operator (EquiNO), a physics-informed PDE surrogate in which equilibrium is hard-enforced by construction. EquiNO achieves this by projecting the solution onto a set of divergence-free basis functions obtained via proper orthogonal decomposition (POD), thereby ensuring satisfaction of equilibrium without relying on penalty terms or multi-objective loss functions. We compare EquiNO with variational physics-informed neural and operator networks that enforce physical constraints only weakly through the loss function, as well as with purely data-driven operator-learning baselines. Our framework, applicable to multiscale FE$^{\,2}$ computations, introduces a finite element-operator learning (FE-OL) approach that integrates the finite element (FE) method with operator learning (OL). We apply the proposed methodology to quasi-static problems in solid mechanics and demonstrate that FE-OL yields accurate solutions even when trained on restricted datasets. The results show that EquiNO achieves speedup factors exceeding 8000-fold compared to traditional methods and offers a robust and physically consistent alternative to existing data-driven surrogate models.

physics.comp-ph↗

arXiv2025

A Neural Operator based Hybrid Microscale Model for Multiscale Simulation of Rate-Dependent Materials

The behavior of materials is influenced by a wide range of phenomena occurring across various time and length scales. To better understand the impact of microstructure on macroscopic response, multiscale modeling strategies are essential. Numerical methods, such as the $\text{FE}^2$ approach, account for micro-macro interactions to predict the global response in a concurrent manner. However, these methods are computationally intensive due to the repeated evaluations of the microscale. This challenge has led to the integration of deep learning techniques into computational homogenization frameworks to accelerate multiscale simulations. In this work, we employ neural operators to predict the microscale physics, resulting in a hybrid model that combines data-driven and physics-based approaches. This allows for physics-guided learning and provides flexibility for different materials and spatial discretizations. We apply this method to time-dependent solid mechanics problems involving viscoelastic material behavior, where the state is represented by internal variables only at the microscale. The constitutive relations of the microscale are incorporated into the model architecture and the internal variables are computed based on established physical principles. The results for homogenized stresses ($<6\%$ error) show that the approach is computationally efficient ($\sim 100 \times$ faster).

physics.comp-ph↗

arXiv2025

A Spatiotemporal Radar-Based Precipitation Model for Water Level Prediction and Flood Forecasting

Study Region: Goslar and Göttingen, Lower Saxony, Germany. Study Focus: In July 2017, the cities of Goslar and Göttingen experienced severe flood events characterized by short warning time of only 20 minutes, resulting in extensive regional flooding and significant damage. This highlights the critical need for a more reliable and timely flood forecasting system. This paper presents a comprehensive study on the impact of radar-based precipitation data on forecasting river water levels in Goslar. Additionally, the study examines how precipitation influences water level forecasts in Göttingen. The analysis integrates radar-derived spatiotemporal precipitation patterns with hydrological sensor data obtained from ground stations to evaluate the effectiveness of this approach in improving flood prediction capabilities. New Hydrological Insights for the Region: A key innovation in this paper is the use of residual-based modeling to address the non-linearity between precipitation images and water levels, leading to a Spatiotemporal Radar-based Precipitation Model with residuals (STRPMr). Unlike traditional hydrological models, our approach does not rely on upstream data, making it independent of additional hydrological inputs. This independence enhances its adaptability and allows for broader applicability in other regions with RADOLAN precipitation. The deep learning architecture integrates (2+1)D convolutional neural networks for spatial and temporal feature extraction with LSTM for timeseries forecasting. The results demonstrate the potential of the STRPMr for capturing extreme events and more accurate flood forecasting.

eess.IV↗

arXiv2024

DiffBatt: A Diffusion Model for Battery Degradation Prediction and Synthesis

Battery degradation remains a critical challenge in the pursuit of green technologies and sustainable energy solutions. Despite significant research efforts, predicting battery capacity loss accurately remains a formidable task due to its complex nature, influenced by both aging and cycling behaviors. To address this challenge, we introduce a novel general-purpose model for battery degradation prediction and synthesis, DiffBatt. Leveraging an innovative combination of conditional and unconditional diffusion models with classifier-free guidance and transformer architecture, DiffBatt achieves high expressivity and scalability. DiffBatt operates as a probabilistic model to capture uncertainty in aging behaviors and a generative model to simulate battery degradation. The performance of the model excels in prediction tasks while also enabling the generation of synthetic degradation curves, facilitating enhanced model training by data augmentation. In the remaining useful life prediction task, DiffBatt provides accurate results with a mean RMSE of 196 cycles across all datasets, outperforming all other models and demonstrating superior generalizability. This work represents an important step towards developing foundational models for battery degradation.

cs.LG↗

arXiv2024

Enhancing Multiscale Simulations with Constitutive Relations-Aware Deep Operator Networks

Multiscale problems are widely observed across diverse domains in physics and engineering. Translating these problems into numerical simulations and solving them using numerical schemes, e.g. the finite element method, is costly due to the demand of solving initial boundary-value problems at multiple scales. On the other hand, multiscale finite element computations are commended for their ability to integrate micro-structural properties into macroscopic computational analyses using homogenization techniques. Recently, neural operator-based surrogate models have shown trustworthy performance for solving a wide range of partial differential equations. In this work, we propose a hybrid method in which we utilize deep operator networks for surrogate modeling of the microscale physics. This allows us to embed the constitutive relations of the microscale into the model architecture and to predict microscale strains and stresses based on the prescribed macroscale strain inputs. Furthermore, numerical homogenization is carried out to obtain the macroscale quantities of interest. We apply the proposed approach to quasi-static problems of solid mechanics. The results demonstrate that our constitutive relations-aware DeepONet can yield accurate solutions even when being confronted with a restricted dataset during model development.

cs.LG↗

arXiv2024

Nonlinear model reduction for operator learning

Operator learning provides methods to approximate mappings between infinite-dimensional function spaces. Deep operator networks (DeepONets) are a notable architecture in this field. Recently, an extension of DeepONet based on model reduction and neural networks, proper orthogonal decomposition (POD)-DeepONet, has been able to outperform other architectures in terms of accuracy for several benchmark tests. We extend this idea towards nonlinear model order reduction by proposing an efficient framework that combines neural networks with kernel principal component analysis (KPCA) for operator learning. Our results demonstrate the superior performance of KPCA-DeepONet over POD-DeepONet.

cs.LG↗

arXiv2024

Physics-informed deep-learning applications to experimental fluid mechanics

High-resolution reconstruction of flow-field data from low-resolution and noisy measurements is of interest due to the prevalence of such problems in experimental fluid mechanics, where the measurement data are in general sparse, incomplete and noisy. Deep-learning approaches have been shown suitable for such super-resolution tasks. However, a high number of high-resolution examples is needed, which may not be available for many cases. Moreover, the obtained predictions may lack in complying with the physical principles, e.g. mass and momentum conservation. Physics-informed deep learning provides frameworks for integrating data and physical laws for learning. In this study, we apply physics-informed neural networks (PINNs) for super-resolution of flow-field data both in time and space from a limited set of noisy measurements without having any high-resolution reference data. Our objective is to obtain a continuous solution of the problem, providing a physically-consistent prediction at any point in the solution domain. We demonstrate the applicability of PINNs for the super-resolution of flow-field data in time and space through three canonical cases: Burgers' equation, two-dimensional vortex shedding behind a circular cylinder and the minimal turbulent channel flow. The robustness of the models is also investigated by adding synthetic Gaussian noise. Furthermore, we show the capabilities of PINNs to improve the resolution and reduce the noise in a real experimental dataset consisting of hot-wire-anemometry measurements. Our results show the adequate capabilities of PINNs in the context of data augmentation for experiments in fluid mechanics.

physics.flu-dyn↗

arXiv2022

The Sustainable Development Goals and Aerospace Engineering: A critical note through Artificial Intelligence

The 2030 Agenda of the United Nations (UN) revolves around the Sustainable Development Goals (SDGs). A critical step towards that objective is identifying whether scientific production aligns with the SDGs' achievement. To assess this, funders and research managers need to manually estimate the impact of their funding agenda on the SDGs, focusing on accuracy, scalability, and objectiveness. With this objective in mind, in this work, we develop ASDG, an easy-to-use artificial-intelligence (AI)-based model for automatically identifying the potential impact of scientific papers on the UN SDGs. As a demonstrator of ASDG, we analyze the alignment of recent aerospace publications with the SDGs. The Aerospace data set analyzed in this paper consists of approximately 820,000 papers published in English from 2011 to 2020 and indexed in the Scopus database. The most-contributed SDGs are 7 (on clean energy), 9 (on industry), 11 (on sustainable cities) and 13 (on climate action). The establishment of the SDGs by the UN in the middle of the 2010 decade did not significantly affect the data. However, we find clear discrepancies among countries, likely indicative of different priorities. Also, different trends can be seen in the most and least cited papers, with clear differences in some SDGs. Finally, the number of abstracts the code cannot identify is decreasing with time, possibly showing the scientific community's awareness of SDG.

cs.DL↗

arXiv2022

Predicting the temporal dynamics of turbulent channels through deep learning

The success of recurrent neural networks (RNNs) has been demonstrated in many applications related to turbulence, including flow control, optimization, turbulent features reproduction as well as turbulence prediction and modeling. With this study we aim to assess the capability of these networks to reproduce the temporal evolution of a minimal turbulent channel flow. We first obtain a data-driven model based on a modal decomposition in the Fourier domain (which we denote as FFT-POD) of the time series sampled from the flow. This particular case of turbulent flow allows us to accurately simulate the most relevant coherent structures close to the wall. Long-short-term-memory (LSTM) networks and a Koopman-based framework (KNF) are trained to predict the temporal dynamics of the minimal-channel-flow modes. Tests with different configurations highlight the limits of the KNF method compared to the LSTM, given the complexity of the flow under study. Long-term prediction for LSTM show excellent agreement from the statistical point of view, with errors below 2% for the best models with respect to the reference. Furthermore, the analysis of the chaotic behaviour through the use of the Lyapunov exponents and of the dynamic behaviour through Poincaré maps emphasizes the ability of the LSTM to reproduce the temporal dynamics of turbulence. Alternative reduced-order models (ROMs), based on the identification of different turbulent structures, are explored and they continue to show a good potential in predicting the temporal dynamics of the minimal channel.

physics.flu-dyn↗

arXiv2021

Towards extraction of orthogonal and parsimonious non-linear modes from turbulent flows

We propose a deep probabilistic-neural-network architecture for learning a minimal and near-orthogonal set of non-linear modes from high-fidelity turbulent-flow-field data useful for flow analysis, reduced-order modeling, and flow control. Our approach is based on $β$-variational autoencoders ($β$-VAEs) and convolutional neural networks (CNNs), which allow us to extract non-linear modes from multi-scale turbulent flows while encouraging the learning of independent latent variables and penalizing the size of the latent vector. Moreover, we introduce an algorithm for ordering VAE-based modes with respect to their contribution to the reconstruction. We apply this method for non-linear mode decomposition of the turbulent flow through a simplified urban environment, where the flow-field data is obtained based on well-resolved large-eddy simulations (LESs). We demonstrate that by constraining the shape of the latent space, it is possible to motivate the orthogonality and extract a set of parsimonious modes sufficient for high-quality reconstruction. Our results show the excellent performance of the method in the reconstruction against linear-theory-based decompositions. Moreover, we compare our method with available AE-based models. We show the ability of our approach in the extraction of near-orthogonal modes that may lead to interpretability.

physics.flu-dyn↗

arXiv2021

Physics-informed neural networks for solving Reynolds-averaged Navier$\unicode{x2013}$Stokes equations

Physics-informed neural networks (PINNs) are successful machine-learning methods for the solution and identification of partial differential equations (PDEs). We employ PINNs for solving the Reynolds-averaged Navier$\unicode{x2013}$Stokes (RANS) equations for incompressible turbulent flows without any specific model or assumption for turbulence, and by taking only the data on the domain boundaries. We first show the applicability of PINNs for solving the Navier$\unicode{x2013}$Stokes equations for laminar flows by solving the Falkner$\unicode{x2013}$Skan boundary layer. We then apply PINNs for the simulation of four turbulent-flow cases, i.e., zero-pressure-gradient boundary layer, adverse-pressure-gradient boundary layer, and turbulent flows over a NACA4412 airfoil and the periodic hill. Our results show the excellent applicability of PINNs for laminar flows with strong pressure gradients, where predictions with less than 1% error can be obtained. For turbulent flows, we also obtain very good accuracy on simulation results even for the Reynolds-stress components.

physics.flu-dyn↗

arXiv2021

Recurrent neural networks and Koopman-based frameworks for temporal predictions in a low-order model of turbulence

The capabilities of recurrent neural networks and Koopman-based frameworks are assessed in the prediction of temporal dynamics of the low-order model of near-wall turbulence by Moehlis et al. (New J. Phys. 6, 56, 2004). Our results show that it is possible to obtain excellent reproductions of the long-term statistics and the dynamic behavior of the chaotic system with properly trained long-short-term memory (LSTM) networks, leading to relative errors in the mean and the fluctuations below $1\%$. Besides, a newly developed Koopman-based framework, called Koopman with nonlinear forcing (KNF), leads to the same level of accuracy in the statistics at a significantly lower computational expense. Furthermore, the KNF framework outperforms the LSTM network when it comes to short-term predictions. We also observe that using a loss function based only on the instantaneous predictions of the chaotic system can lead to suboptimal reproductions in terms of long-term statistics. Thus, we propose a model-selection criterion based on the computed statistics which allows to achieve excellent statistical reconstruction even on small datasets, with minimal loss of accuracy in the instantaneous predictions.

physics.flu-dyn↗

arXiv2020

Deep Neural Networks for Nonlinear Model Order Reduction of Unsteady Flows

Unsteady fluid systems are nonlinear high-dimensional dynamical systems that may exhibit multiple complex phenomena both in time and space. Reduced Order Modeling (ROM) of fluid flows has been an active research topic in the recent decade with the primary goal to decompose complex flows to a set of features most important for future state prediction and control, typically using a dimensionality reduction technique. In this work, a novel data-driven technique based on the power of deep neural networks for reduced order modeling of the unsteady fluid flows is introduced. An autoencoder network is used for nonlinear dimension reduction and feature extraction as an alternative for singular value decomposition (SVD). Then, the extracted features are used as an input for long short-term memory network (LSTM) to predict the velocity field at future time instances. The proposed autoencoder-LSTM method is compared with non-intrusive reduced order models based on dynamic mode decomposition (DMD) and proper orthogonal decomposition (POD). Moreover, an autoencoder-DMD algorithm is introduced for reduced order modeling, which uses the autoencoder network for dimensionality reduction rather than SVD rank truncation. Results show that the autoencoder-LSTM method is considerably capable of predicting fluid flow evolution, where higher values for coefficient of determination $R^{2}$ are obtained using autoencoder-LSTM compared to other models.

physics.flu-dyn↗