arXiv subjects

Hangbo Shi

Publications and source records attributed to Hangbo Shi.

5 recordsLinked to original sources

arXiv2026

Dual-Faraday-laser-pumped cesium beam clock with $7.7\times 10^{-13}/\sqrt\tau$ frequency stability

Compact cesium beam clocks are major frequency references for deployable timing systems. However, further improvement of their short-term frequency stability is limited by the clock signal-to-noise ratio (SNR). Although two-laser optical pumping can increase the effective atomic utilization, the achievable clock SNR has long been limited by laser-induced frequency-to-amplitude noise conversion. Here, we demonstrate a compact dual-Faraday-laser-pumped (DFP) Cs beam clock enabled by a low-frequency-noise atom-referenced laser architecture. The intracavity Faraday anomalous dispersion optical filter provides inherent alignment to the Cs D$_2$ resonances, while modulation transfer spectroscopy offers suppressed frequency noise and drift. The resulting laser system supports robust turnkey operation with a Lorentzian linewidth of 2.12 kHz. The DFP Cs clock achieves a clock SNR of 46,365 in a 1-Hz bandwidth and a fractional Allan deviation of $7.7\times 10^{-13}/\sqrt\tau$ , with Hadamard deviation reaching $7.7\times 10^{-15}$ at 10,000 s. This work pushes the fractional frequency stability of a compact Cs beam clock into the $10^{-13}/\sqrt\tau$ regime, providing a pathway toward high-performance Cs frequency references for field-deployable precision timing, navigation, and synchronization.

physics.atom-ph↗

arXiv2024

Faraday laser pumped cesium beam clock

We realize a high-performance compact optically pumped cesium beam clock using Faraday laser simultaneously as pumping and detection lasers. The Faraday laser, which is frequency stabilized by modulation transfer spectroscopy (MTS) technique, has narrow linewidth and superior frequency stability. Measured by optical heterodyne method between two identical systems, the linewidth of the Faraday laser is 2.5 kHz after MTS locking, and the fractional frequency stability of the Faraday laser is optimized to $1.8\times{10}^{-12}/\sqrtτ$. Based on this high-performance Faraday laser, the cesium beam clock realizes a signal-to-noise ratio (SNR) in 1 Hz bandwidth of $39600$ when the cesium oven temperature is 130°C. Frequency-compared with Hydrogen maser, the fractional frequency stability of the Faraday laser pumped cesium beam clock can reach $1.3\times{10}^{-12}/\sqrtτ$ and drops to $1.4\times{10}^{-14}$ at 10000 s when the cesium oven temperature is 110°C. %, which is the best reported result compared with other cesium beam clocks. This Faraday laser pumped cesium beam clock demonstrates its excellent performance, and its great potential in the fields of timekeeping, navigation, and communication. Meanwhile, the Faraday laser, as a high-performance optical frequency standard, can also contribute to the development of other applications in quantum metrology, precision measurement and atomic physics.

physics.atom-ph↗

arXiv2024

A corner-cube-feedback Faraday laser with 8 kHz linewidth

A single-mode Cs atom 852 nm Faraday laser based on the corner cube feedback is demonstrated, and termed as corner-cube-feedback Faraday laser. Using the corner-cube retroreflector as external cavity feedback element in Faraday laser, mechanical robustness can be greatly improved due to the precise reflection of the incident light beam back to its original direction. This Faraday laser can achieve laser oscillation at a large angle, which between the incident light and the optical axis of corner cube, ranging from +3° to -3°. The most probable linewidth is 8 kHz measured by heterodyne beating with two identical lasers. Moreover, its output frequency remains close to the Cs atomic Doppler-broadened transition line, even though the diode current changes from 55 mA to 155 mA and the diode working temperature varies from 11.8 to 37.2 degrees Celsius. The corner-cube-feedback Faraday laser with high mechanical robustness as well as narrow linewidth can be widely used in quantum precision measurement, such as atomic clocks, atomic gravimeters, and atomic magnetometers, etc.

physics.optics↗

arXiv2024

Dual-frequency optical-microwave atomic clocks based on cesium atoms

$^{133}$Cs, which is the only stable cesium (Cs) isotope, is one of the most investigated elements in atomic spectroscopy and was used to realize the atomic clock in 1955. Among all atomic clocks, the cesium atomic clock has a special place, since the current unit of time is based on a microwave transition in the Cs atom. In addition, the long lifetime of the $6{\text{P}}_{3/2}$ state and simple preparation technique of Cs vapor cells have great relevance to quantum and atom optics experiments, which suggests the use of the $6{\text{S}} - 6{\text{P}}$ D2 transition as an optical frequency standard. In this work, using one laser as the local oscillator and Cs atoms as the quantum reference, we realized two atomic clocks in the optical and microwave frequencies, respectively. Both clocks could be freely switched or simultaneously output. The optical clock based on the vapor cell continuously operated with a frequency stability of $3.89 \times {10^{ - 13}}$ at 1 s, decreasing to $2.17 \times {10^{ - 13}}$ at 32 s, which was frequency stabilized by modulation transfer spectroscopy and estimated by an optical comb. Then, applying this stabilized laser for an optically pumped Cs beam atomic clock to reduce the laser frequency noise, we obtained a microwave clock with a frequency stability of $1.84 \times {10^{ - 12}}/\sqrt τ$, reaching $5.99 \times {10^{ - 15}}$ at $10^5$ s. This study demonstrates an attractive feature for the commercialization and deployment of optical and microwave clocks and will guide further development of integrated atomic clocks with better stability. Thus, this study lays the groundwork for future quantum metrology and laser physics.

physics.atom-ph↗

arXiv2023

A Voigt laser operating on $^{87}$Rb 780 nm transition

We report the development of laser systems -- a "Voigt laser" -- using a Voigt anomalous dispersion optical filter as the frequency-selective element, working at the wavelength of 780 nm of $^{87}$Rb-D2 resonance line. Compared with Faraday anomalous dispersion optical filter, the Voigt anomalous dispersion optical filter can generate a stronger and more uniform magnetic field with a compact size of magnet, and obtains a transmission spectrum with narrower linewidth and more stable lineprofile. In this case, the frequency stability of the Voigt laser reaches 5$\times$10$^{-9}$ at the averaging time of 200 s, and the wavelength fluctuation of 8-hours free operation is $\pm$0.1 pm. Besides, the Voigt laser has greater immunity to diode current than the Faraday laser, with a wavelength fluctuation of $\pm$0.5 pm in the current range from 73 mA to 150 mA. Finally, the Voigt laser frequency can be controlled by the cell temperature of the Voigt optical filter, which is expected to achieve a frequency detuning of 20 GHz. Consequently, the Voigt laser, whose frequency could correspond to the atomic transition frequency by tuning the cell temperature, obtains good robustness to the current and temperature fluctuation of laser diode, and could realize a compact optical standard for precise measurement once stabilized by modulation transfer spectroscopy.

physics.optics↗