arXiv subjects

Hanke Feng

Publications and source records attributed to Hanke Feng.

At least 19 recordsLinked to original sources

arXiv2026

Inverse-designed photonic interfaces beyond eigenmode expansion limits

Photonic integrated circuits (PICs) enable optical systems with dramatically increased performance, cost-effectiveness, and scalability through enhanced light-matter interactions, high-density integration, and mass production. Due to the significant mode mismatch between various integrated photonic platforms and optical fibers, spot-size conversion interfaces with low-loss, compact footprint, and high manufacturability are essential. Conventional spot-size converters based on intuitive designs often require multi-layer tapering structures and tiny waveguide tips to adiabatically expand the eigenmodes. These rigid design constraints commonly lead to large device footprints and the requirements of multiple high-precision lithography steps. In this paper, we overcome these limitations using inverse design methods, which optimize the coupling efficiency over a large parameter space beyond traditional eigenmode evolution limits. Specifically, we demonstrate efficient and ultra-compact photonic interfaces on the thin-film lithium niobate (TFLN) platform, where the partially etched rib waveguides and non-vertical sidewalls have previously hindered the achievement of low-loss waveguide tapers in single-layer configurations. Our inverse-designed photonic structures achieve simulated and experimentally measured coupling efficiencies as low as 1 dB and 3 dB per facet between TFLN waveguides and lensed/ultra-high numerical aperture (UHNA) fiber, with broad 1-dB bandwidths exceeding 120 nm. The inverse-designed interfaces are highly compatible with standard TFLN PIC components and require only a single high-resolution lithography step. More importantly, the design concept transcends traditional eigenmode evolution theories and is broadly applicable to a variety of material platforms and application scenarios.

physics.optics↗

arXiv2026

Integrated Terahertz Photonic Receiving Frontend with Link Noise Outperforming Electronics

Terahertz technology is a key enabler for sixth-generation (6G) wireless networks, yet its application is constrained by increasingly severe free-space loss at high frequencies. To efficiently retrieve weak signals at the receiving end, a compact frontend that features both a high-gain antenna and a low-noise signal-detection chain is critical. Current transistor-based THz electronic frontends face significant challenges in meeting these demands because both on-chip antenna efficiency and transistor noise performance degrade rapidly when approaching their cut-off frequencies. Photonic technology provides an alternative solution to circumvent the transistor bandwidth limit, yet most microwave photonic links to date exhibit noise performance substantially worse than state-of-the-art electronics. Here, we demonstrate low-noise integrated THz photonic frontends that deliver undegraded link noise performance across three major THz windows from 140 to 450 GHz, and outperform electronic frontends in the upper two windows. We achieve this through co-design of high-gain on-chip THz antenna array and broadband THz-optic modulator on a single thin-film lithium niobate (TFLN) chip, leading to distributed reception of free-space THz signals and continuous coherent build-up of the THz-optic conversion process with unprecedented efficiency. Combined with an efficient heterodyne detection chain, our integrated frontends exhibit effective isotropic noise figures of 13.6 and 16.2 dB at 250 and 450 GHz, respectively, both setting new benchmarks in their respective bands. We further demonstrate 6G-oriented multi-link communication up to 20 Git/s. Our integrated frontends represent a significant step towards compact, cost-effective and energy-efficient THz wireless systems in 6G and beyond.

physics.optics↗

arXiv2026

Multi-channel high-speed flip-chip packaging platform for thin-film lithium niobate photonic circuits

To address the urgent need for multi-channel high-speed electrical interfacing of thin-film lithium niobate (TFLN) photonic circuits, we realize a flip-chip packaging platform capable of simultaneously delivering 13 high-speed and 32 low-speed electronic signals to a centimeter-sized TFLN chip. The platform exhibits low flip-chip bonding loss and low inter-channel crosstalk over a broad bandwidth up to 50 GHz. Leveraging this packaging platform, we demonstrate high-speed electrical interfacing with two proof-of-concept TFLN photonic circuits, namely a 2x8 optical switch and an electro-optic comb-based transmitter. The switch achieves arbitrary 8-channel routing with ~3 dB insertion loss, < -20 dB crosstalk, and an equipment-limited switching time of <= 34 ps. The transmitter circuit includes a 50 GHz electro-optic comb generator with 2.8-dB flatness, a tunable microring to arbitrarily filter one comb line, and a modulator for data transmission at 20 Gbit/s. The packaging platform could significantly advance large-scale TFLN circuits in optical communications, microwave photonics, and photonic computing.

physics.optics↗

arXiv2026

Integrated lithium niobate microwave photonics: Driving next-generation wireless technologies

Integrated microwave photonics (MWP) offers a powerful paradigm for handling high-speed microwave signals within chip-scale optical systems. It provides a cost-effective solution to address bandwidth, tunability, and loss bottlenecks of electronics-based radio frequency (RF) systems. The recently emerged thin-film lithium niobate (TFLN) photonic platform, with its exceptional electro-optic (EO) properties, low loss, and scalability, has shown promise to reshape the MWP landscape. Here, we discuss the performance implications of state-of-the-art TFLN photonic devices for MWP applications and offer insights into the emerging trends for next-generation wireless networks. In particular, the unparalleled EO bandwidth enables direct optical generation, processing, and reception of millimeter-wave or even terahertz (THz) signals, significantly expanding the operation frequency range of MWP systems. The low drive voltages and linearity of TFLN modulators lead to an unprecedented operation regime of radio-over-fiber (RoF) systems, featuring net gain, low noise figure and large dynamic range, simultaneously. The availability of a versatile device toolkit, combined with low optical loss and scalability, further supports the transition from traditional tabletop MWP systems to chip-scale solutions, with advanced functionalities, compact footprint, and enhanced system robustness. As the TFLN industrial ecosystem rapidly matures, TFLN-based MWP technology has the potential to deliver transformative solutions to future 6G integrated sensing and communication networks.

physics.optics↗

arXiv2025

Integrated photonic ultrawideband real-time spectrum sensing for 6G wireless networks

The sixth generation (6G) wireless networks require dynamic spectrum management to optimize the utilization of scarce spectral resources and support emerging integrated sensing and communication (ISAC) applications. This necessitates real-time spectrum sensing (RT-SS) capability with ultrawide measurement range, compact size, and low latency. Conventional electronic RT-SS solutions face critical challenges in operating across the millimeter-wave and sub-terahertz bands, which are essential spectra for 6G wireless. While photonic RT-SS has the potential to surpass this limitation, the current implementations feature limited bandwidths below 50 GHz and mostly rely on bulky dispersive fibers with high latency. Here, we address these challenges by developing an integrated photonic RT-SS system capable of ultrabroadband measurement from microwave to sub-terahertz bands, covering the full spectrum for 6G wireless. The photonic RT-SS circuit integrates a broadband electro-optic (EO) modulator for unknown signal loading, an EO tunable microring filter bank for high-speed parallel frequency-to-time mapping, as well as an EO comb for precise channel frequency referencing, all realized on a single thin-film lithium niobate chip. We achieve an unprecedented spectral measurement range beyond 120 GHz at a low latency of less than 100 ns. To validate the effectiveness of our photonic RT-SS system in future 6G scenes, we further propose a heuristic spectro-temporal resource allocation algorithm and conduct a proof-of-concept ISAC demonstration, where a radar adaptively access RT-SS-informed spectrally underutilized regions for high-quality target sensing under dynamic communication interferences. Our work presents a compact and cost-effective solution for efficient spectrum sharing and dynamic management in future 6G ISAC networks.

physics.optics↗

arXiv2025

Ultrabroadband Integrated Photonics Empowering Full-Spectrum Adaptive Wireless Communications

The forthcoming sixth-generation (6G) and beyond (XG) wireless networks are poised to operate across an expansive frequency range from microwave, millimeter-wave to terahertz bands to support ubiquitous connectivity in diverse application scenarios. This necessitates a one-size-fits-all hardware solution that can be adaptively reconfigured within this wide spectrum to support full-band coverage and dynamic spectrum management. However, existing electrical or photonic-assisted wireless communication solutions see significant challenges in meeting this demand due to the limited bandwidths of individual devices and the intrinsically rigid nature of their system architectures. Here, we demonstrate adaptive wireless communications over an unprecedented frequency range spanning over 100 GHz, driven by a universal thin-film lithium niobate (TFLN) photonic wireless engine. Leveraging the strong Pockels effect and excellent scalability of the TFLN platform, we achieve monolithic integration of essential functional elements, including baseband modulation, broadband wireless-photonic conversion, and reconfigurable carrier/local signal generation. Powered by broadband tunable optoelectronic oscillators, our signal sources operate across a record-wide frequency range from 0.5 GHz to 115 GHz with high frequency stability and consistent coherence. Based on the broadband and reconfigurable integrated photonic solution, we realize, for the first time, full-link wireless communication across 9 consecutive bands, achieving record lane speeds of up to 100 Gbps. The real-time reconfigurability further enables adaptive frequency allocation, a crucial capability to ensure enhanced reliability in complex spectrum environments. Our proposed system marks a significant step towards future full-spectrum and omni-scenario wireless networks.

physics.optics↗

arXiv2025

Space compatibility of emerging, wide-bandgap, ultralow-loss integrated photonics

Integrated photonics has revolutionized optical communication, sensing, and computation, offering miniaturized and lightweight solutions for spacecraft with limited size and payload. Novel chip-scale instruments based on ultralow-loss integrated photonic platforms, including lasers, frequency combs and atomic traps, have been developed for space applications. Therefore, quantifying the space compatibility of ultralow-loss photonic integrated circuits (PICs), particularly their radiation resistance, is critical. This study experimentally evaluates the radiation resistance of ultralow-loss Si$_3$N$_4$, 4H-SiC, and LiNbO$_3$ PICs under intense $\gamma$-ray and high-energy proton irradiation. Results show that proton irradiation with $1.1 \times 10^{10}$ $\mathrm{p/cm^2}$ total flux does not significantly increase optical loss or alter the refractive index of these PICs, while $\gamma$-ray irradiation with 1.2 Mrad accumulated dose only marginally increases their optical loss. These findings provide preliminary evidence of the excellent space compatibility of ultralow-loss Si$_3$N$_4$, 4H-SiC, and LiNbO$_3$ PICs, highlighting their potential for compact and lightweight space systems.

physics.optics↗

arXiv2024

Mono-drive single-sideband modulation via optical delay lines on thin-film lithium niobate

Optical single-sideband (SSB) modulation features high spectral efficiency, substantial dispersion tolerance, and straightforward detection, making it a versatile technology for applications in optical communications, microwave photonics, optical sensing, satellite communication, etc. However, conventional SSB generators typically require two radio-frequency (RF) signals with a 90{\deg} phase difference to drive a pair of parallel phase or amplitude modulators, resulting in high system complexity and low power efficiency. In this paper, we propose and realize a simplified SSB generation scheme necessitating only a single RF drive, by achieving effective RF phase shift using on-chip optical delay lines. This approach not only reduces system complexity and saves energy consumption by 3 dB, but also enables easy scalability to higher frequencies. We demonstrate both full-carrier SSB (FC-SSB) and carrier-suppressed SSB (CS-SSB) modulation on thin-film lithium niobate platform. For FC-SSB, we show a maximum sideband suppression of 22.1 dB at 50 GHz and apply it to address the frequency-selective power fading problem in optical communication systems. For CS-SSB, we show a maximum sideband suppression of 22.5 dB and a sideband-to-carrier suppression of 16.9 dB at 50 GHz, which can act as an optical frequency shifter by sweeping the modulation frequencies. Moreover, the shifted optical frequency can be transferred back to the electrical domain by beating with a reference signal generated via a phase modulator on the same chip, achieving broadband RF frequency shifting from a maximum of 50 GHz down to 1 GHz. Our simple, power-efficient, and low-cost SSB modulation scheme could provide an effective solution for future high-frequency direct detection-based communication systems, frequency-modulated continuous wave radar/LiDAR, optical vector network analyzers, and microwave photonics systems.

physics.optics↗

arXiv2024

Brillouin photonics engine in the thin-film lithium niobate platform

Stimulated Brillouin scattering (SBS) is revolutionizing low-noise lasers and microwave photonic systems. However, despite extensive explorations of a low-loss and versatile integrated platform for Brillouin photonic circuits, current options fall short due to limited technological scalability or inadequate SBS gain. Here we introduce the thin-film lithium niobate (TFLN) platform as the go-to choice for integrated Brillouin photonics applications. We report the angle-dependent strong SBS gain in this platform, which can overcome the intrinsic propagation loss. Furthermore, we demonstrate the first stimulated Brillouin laser in TFLN with a tuning range > 20 nm and utilize it to achieve high-purity RF signal generation with an intrinsic linewidth of 9 Hz. Finally, we devise a high-rejection Brillouin-based microwave photonic notch filter, for the first time, integrating an SBS spiral, an on-chip modulator, and a tunable ring all within the same platform. This TFLN-based Brillouin photonics engine uniquely combines the scalability of this platform and the versatility of SBS. Moreover, it bridges SBS with other functionalities in the TFLN platform, unlocking new possibilities for Brillouin-based applications with unparalleled performances.

physics.optics↗

arXiv2024

Broadband millimeter-wave frequency mixer based on thin-film lithium niobate photonics

Frequency mixers are fundamental components in modern wireless communication and radar systems, responsible for up- and down-conversion of target radio-frequency (RF) signals. Recently, photonic-assisted RF mixers have shown unique advantages over traditional electronic counterparts, including broad operational bandwidth, flat frequency response, and immunity to electromagnetic interference. However, current integrated photonic mixers face significant challenges in achieving efficient conversion at high frequencies, especially in millimeter-wave bands, due to the limitations of existing electro-optic (EO) modulators. Additionally, high-frequency local oscillators in the millimeter-wave range are often difficult to obtain and expensive, leading to unsatisfactory cost and restricted operational bandwidth in practice. In this paper, we harness the exceptional EO property and scalability of thin-film lithium niobate (TFLN) photonic platform to implement a high-performance harmonic reconfigurable millimeter-wave mixer. The TFLN photonic circuit integrates a broadband EO modulator that allows for extensive frequency coverage, and an EO frequency comb source that significantly reduces the required carrier frequency of the local oscillator. We experimentally demonstrate fully reconfigurable frequency down-conversion across a broad operational bandwidth ranging from 20 GHz to 67 GHz, with a large intermediate frequency of 20 GHz, as well as up-conversion to frequencies of up to 110 GHz. Our integrated photonic mixing system shows dramatically improved bandwidth performance, along with competitive indicators of frequency conversion efficiency and spurious suppression ratio, positioning it as a promising solution for future millimeter-wave transceivers in next-generation communication and sensing systems.

physics.optics↗

arXiv2024

Integrated adaptive coherent LiDAR for 4D bionic vision

Light detection and ranging (LiDAR) is a ubiquitous tool to provide precise spatial awareness in various perception environments. A bionic LiDAR that can mimic human-like vision by adaptively gazing at selected regions of interest within a broad field of view is crucial to achieve high-resolution imaging in an energy-saving and cost-effective manner. However, current LiDARs based on stacking fixed-wavelength laser arrays and inertial scanning have not been able to achieve the desired dynamic focusing patterns and agile scalability simultaneously. Moreover, the ability to synchronously acquire multi-dimensional physical parameters, including distance, direction, Doppler, and color, through seamless fusion between multiple sensors, still remains elusive in LiDAR. Here, we overcome these limitations and demonstrate a bio-inspired frequency-modulated continuous wave (FMCW) LiDAR system with dynamic and scalable gazing capability. Our chip-scale LiDAR system is built using hybrid integrated photonic solutions, where a frequency-chirped external cavity laser provides broad spectral tunability, while on-chip electro-optic combs with elastic channel spacing allow customizable imaging granularity. Using the dynamic zoom-in capability and the coherent FMCW scheme, we achieve a state-of-the-art resolution of 0.012 degrees, providing up to 15 times the resolution of conventional 3D LiDAR sensors, with 115 equivalent scanning lines and 4D parallel imaging. We further demonstrate cooperative sensing between our adaptive coherent LiDAR and a camera to enable high-resolution color-enhanced machine vision.

physics.optics↗

arXiv2024

Programmable multifunctional integrated microwave photonic circuit on thin-film lithium niobate

Microwave photonics, with its advanced high-frequency signal processing capabilities, is expected to play a crucial role in next-generation wireless communications and radar systems. The realization of highly integrated, high-performance, and multifunctional microwave photonic links will pave the way for its widespread deployment in practical applications, which is a significant challenge. Here, leveraging thin-film lithium niobate intensity modulator and programmable cascaded microring resonators, we demonstrate for the first time a tunable microwave photonic notch filter that simultaneously achieves high level of integration along with high dynamic range, high link gain, low noise figure, and ultra-high rejection ratio. Additionally, this programmable on-chip system is multifunctional, allowing for the dual-band notch filter and the suppression of the high-power interference signal. This work demonstrates the potential applications of the thin-film lithium niobate platform in the field of high-performance integrated microwave photonic filtering and signal processing, facilitating the advancement of microwave photonic system towards practical applications.

physics.optics↗

arXiv2024

Microwave resonator-enabled broadband on-chip electro-optic frequency comb generation

Optical frequency combs play a crucial role in optical communications, time-frequency metrology, precise ranging, and sensing. Among various generation schemes, resonant electro-optic combs are particularly attractive for its excellent stability, flexibility and broad bandwidths. In this approach, an optical pump undergoes multiple electro-optic modulation processes in a high-Q optical resonator, resulting in cascaded spectral sidebands. However, most resonant electro-optic combs to date make use of lumped-capacitor electrodes with relatively inefficient utilization of the input electrical power. This design also reflects most electrical power back to the driving circuits and necessitates costly RF isolators in between, presenting substantial challenges in practical applications. To address these issues, we present an RF circuit friendly electro-optic frequency comb generator incorporated with on-chip coplanar microwave resonator electrodes, based on a thin-film lithium niobate platform. Our design achieves more than three times electrical power reduction with minimal reflection at the designed comb repetition rate of ~ 25 GHz. We experimentally demonstrate broadband electro-optic frequency comb generation with a comb span of >85 nm at a moderate electrical driving power of 740 mW (28.7 dBm). Our power-efficient and isolator-free electro-optic comb source could offer compact, low-cost and simple-to-design solution for applications in spectroscopy, high-precise metrology, optical communications.

physics.optics↗

arXiv2024

Monolithic lithium niobate photonic chip for efficient terahertz-optic modulation and terahertz generation

The terahertz (THz) frequency range, bridging the gap between microwave and infrared frequencies, presents unparalleled opportunities for advanced imaging, sensing, communications, and spectroscopy applications. Terahertz photonics, in analogy with microwave photonics, is a promising solution to address the critical challenges in THz technologies through optical methods. Despite its vast potential, key technical challenges remain in effectively interfacing THz signals with the optical domain, especially THz-optic modulation and optical generation of THz waves. Here, we address these challenges using a monolithic integrated photonic chip designed to support efficient bidirectional interaction between THz and optical waves. Leveraging the significant second-order optical nonlinearity and strong optical and THz confinement in a thin-film lithium niobate on quartz platform, the chip supports both efficient THz-optic modulation and continuous THz wave generation at up to 500 GHz. The THz-optic modulator features a radio frequency (RF) half-wave voltage of 8V at 500 GHz, representing more than an order of magnitude reduction in modulation power consumption from previous works. The measured continuous wave THz generation efficiency of 4.8*10-6 /W at 500 GHz also marks a tenfold improvement over existing tunable THz generation devices based on lithium niobate. We further leverage the coherent nature of the optical THz generation process and mature optical modulation techniques to realize high-speed electro-THz modulation at frequencies up to 35 GHz. The chip-scale THz-photonic platform paves the way for more compact, efficient, and cost-effective THz systems with potential applications in THz communications, remote sensing, and spectroscopy.

physics.optics↗

arXiv2024

In-situ optical vector analysis based on integrated lithium niobate single-sideband modulators

Optical vector analysis (OVA) is an enabling technology for comprehensively characterizing both amplitude and phase responses of optical devices or systems. Conventional OVA technologies are mostly based on discrete optoelectronic components, leading to unsatisfactory system sizes, complexity, and stability. They also encounter challenges in revealing the on-chip characteristics of integrated photonic devices, which are often overwhelmed by the substantial coupling loss and extra spectral response at chip facets. In this work, we demonstrate a miniaturized OVA system for integrated photonics devices based on broadband single sideband (SSB) modulators on a thin-film lithium niobate (LN) platform. The OVA could provide a direct probe of both amplitude and phase responses of photonic devices with kHz-level resolution and tens of terahertz measurement bandwidth. We perform in-situ characterizations of single and coupled microring resonators fabricated on the same chip as the OVA, unfolding their intrinsic loss and coupling states unambiguously. Furthermore, we achieve the direct measurement of collective phase dynamics and density of states of the Bloch modes in a synthetic frequency crystal, by in-situ OVA of a dynamically modulated microring resonator. Our in-situ OVA system provides a compact, high-precision, and broadband solution for characterizing future integrated photonic devices and circuits, with potential applications ranging from optical communications, biosensing, neuromorphic computing, to quantum information processing.

physics.optics↗

arXiv2024

Hypermultiplexed Integrated-Photonics-based Tensor Optical Processor

The escalating data volume and complexity resulting from the rapid expansion of artificial intelligence (AI), internet of things (IoT) and 5G/6G mobile networks is creating an urgent need for energy-efficient, scalable computing hardware. Here we demonstrate a hypermultiplexed integratedphotonics-based tensor optical processor (HITOP) that can perform trillions of operations per second (TOPS) at the energy efficiency of 40 TOPS/W. Space-time-wavelength three-dimensional (3D) optical parallelism enables O($N^{2}$) operations per clock-cycle using O($N$) modulator devices. The system is built with wafer-fabricated III/V micron-scale lasers and high-speed thin-film Lithium-Niobate electro-optics for encoding at 10s femtojoule/symbol. Lasing threshold incorporates analog inline rectifier (ReLu) nonlinearity for low-latency activation. The system scalability is verified with machine learning models of 405,000 parameters. A combination of high clockrates, energy-efficient processing and programmability unlocks the potential of light for large-scale AI accelerators in applications ranging from training of large AI models to real-time decision making in edge deployment.

cs.ET↗

arXiv2024

Spectral engineering of optical microresonators in anisotropic lithium niobate crystal

On-chip optical microresonators are essential building blocks in integrated optics. The ability to arbitrarily engineer their resonant frequencies is crucial for exploring novel physics in synthetic frequency dimensions and practical applications like nonlinear optical parametric processes and dispersion-engineered frequency comb generation. Photonic crystal ring (PhCR) resonators are a versatile tool for such arbitrary frequency engineering, by controllably creating mode splitting at selected resonances. To date, these PhCRs have mostly been demonstrated in isotropic photonic materials, while such engineering could be significantly more complicated in anisotropic platforms that often offer more fruitful optical properties. Here, we realize the spectral engineering of chip-scale optical microresonators in the anisotropic lithium niobate (LN) crystal by a gradient design that precisely compensates for variations in both refractive index and perturbation strength. We experimentally demonstrate controllable frequency splitting at single and multiple selected resonances in LN PhCR resonators with different sizes, while maintaining high Q-factors up to 1 million. Moreover, we experimentally construct a sharp boundary in the synthetic frequency dimension based on an actively modulated x-cut LN gradient-PhCR, opening up new paths toward the arbitrary control of electro-optic comb spectral shapes and exploration of novel physics in the frequency degree of freedom.

physics.optics↗

arXiv2023

Integrated lithium niobate photonic millimeter-wave radar

Millimeter-wave (mmWave,>30 GHz) radars are the key enabler in the coming 6G era for high-resolution sensing and detection of targets. Photonic radar provides an effective approach to overcome the limitations of electronic radars thanks to the high frequency, broad bandwidth, and excellent reconfigurability of photonic systems. However, conventional photonic radars are mostly realized in tabletop systems composed of bulky discrete components, whereas the more compact integrated photonic radars are difficult to reach the mmWave bands due to the unsatisfactory bandwidths and signal integrity of the underlining electro-optic modulators. Here, we overcome these challenges and demonstrate a centimeter-resolution integrated photonic radar operating in the mmWave V band (40-50 GHz) based on a 4-inch wafer-scale thin-film lithium niobate (TFLN) technology. The fabricated TFLN mmWave photonic integrated circuit consists of a first electro-optic modulator capable of generating a broadband linear frequency modulated mmWave radar waveform through optical frequency multiplication of a low-frequency input signal, and a second electro-optic modulator responsible for frequency de-chirp of the received reflected echo wave, therefore greatly relieving the bandwidth requirements for the analog-to-digital converter in the receiver. Thanks to the absence of optical and electrical filters in the system, our integrated photonic mmWave radar features continuous on-demand tunability of the center frequency and bandwidth, currently only limited by the bandwidths of electrical amplifiers. We achieve multi-target ranging with a resolution of 1.50 cm and velocity measurement with a resolution of 0.067 m/s. Furthermore, we construct an inverse synthetic aperture radar (ISAR) and successfully demonstrate the imaging of targets with various shapes and postures with a two-dimensional resolution of 1.50 cm * 1.06 cm.

physics.optics↗