arXiv subjects

Hanlong Li

Publications and source records attributed to Hanlong Li.

7 recordsLinked to original sources

arXiv2026

AIRoA-0: Long-Horizon, Precise, Cross-Embodiment Manipulation from Handheld Data

AIRoA-0 (A-0) is a bimanual manipulation system learned from 16,151 hours of handheld demonstrations, with no robot data collected at any stage. The demonstrations are recorded with YUBI, our open-source handheld gripper, which lets people record manipulation data anywhere with no robot present. From a single instruction, A-0 sorts more than a dozen small parts into their numbered cells and changes the mop pads and brush of a robot vacuum; among other tasks, it unzips a pencil case and folds a towel. It performs these tasks using only a camera on each wrist, with no head or scene camera, at a site where none of its training data was recorded. Across the ten tasks of our evaluation, it averages a success rate of 78%, against 27% for the strongest of four other vision-language-action models post-trained on the same task demonstrations. We collect no teleoperation data and use no reinforcement learning or on-robot corrections, and the robot appears only at test time. The system learns which regions of each wrist view matter for the task, predicts the stage the task has reached, and decodes actions as a continuous stream. A-0 is embodiment-agnostic: it runs on robots that mount the YUBI gripper, such as a bimanual Franka, TX-G2, OpenArm and UR. We are releasing the dataset, to our knowledge the largest open dataset of handheld-gripper demonstrations with task and subtask instructions, together with the pre-trained weights and the post-training recipe. Videos of A-0 on every task are on the project page, https://a-0.airoa.io. Anyone can build the gripper, record a task of their own and post-train the model on it in under four hours on a single node of eight H200 GPUs.

cs.RO↗

arXiv2026

Paraphrase Consensus Is Not Self-Consistency: Instruction Reliance and Robustness in VLA Policies

Vision-language-action (VLA) policies fine-tuned on LIBERO are trained and evaluated on the same ten instruction strings, and rewording the instruction changes base OpenVLA's success by -38.0 points. Test-time prompt ensembling, which improves language models, does not recover this loss in any setting we ran. Paraphrase consensus (the medoid action over K paraphrases) costs base OpenVLA 16.8 points when the training instruction is a member. Without it, the medoid of the paraphrases scores -32.4 points relative to the training instruction, and confidence-based selection scores -28.0. The same medoid over samples of one paraphrase improves on greedy decoding but stays -27.6 points below the training instruction, consistent with aggregation reducing variance without removing the bias the paraphrases share. A wrong-instruction probe measures how much of a policy's success depends on the instruction. Across three policies and four suites, paraphrases cost a policy only where this share is high, and the stronger policies lose a much smaller fraction of it than base OpenVLA. LoRA post-training on paraphrased instructions reduces the one-paraphrase effect to +2.0 points, against -32.0 for a matched control, reproduces across two seeds and on OpenVLA-OFT, transfers to withheld phrasings, and leaves the policy's reliance on the instruction unchanged.

cs.RO↗

arXiv2026

YUBI-STAG: Contact and Semantic-Rich Alignment for VLAs via Automated Video-Language Grounding

Vision-Language-Action (VLA) models acquire broad manipulation capabilities via large-scale pretraining, yet eliciting them through language requires fine-grained alignment between instructions and physical interactions. Existing robot demonstrations typically provide only coarse task descriptions, omitting how actions are executed, including which gripper acts, which object is contacted, and how it is grasped and moved. We introduce YUBI-STAG, a framework for Spatio-Temporal Annotation and Grounding that automatically enriches manipulation demonstrations with interaction-rich semantics to align pretrained VLAs with fine-grained manipulation language. Combining contact-object segmentation with vision-language models, YUBI-STAG annotates object identities, attributes and states, per-gripper actions, bimanual coordination, and spatially grounded interactions. To address YUBI-STAG's reliance on localized sequences and multi-stage VLM inference, we distill it into YUBI-VLM. YUBI-VLM directly recovers action structure and annotations from raw, unsegmented video in few inference calls and operates from wrist views alone. We evaluate both frameworks on YUBI-STAG-Bench across temporal, semantic, and spatial grounding tasks. YUBI-VLM retains much of YUBI-STAG's annotation accuracy with fewer inference calls and shorter runtime while generalizing to unseen manipulations. Finally, post-training VLA policies on these annotations aligns them with fine-grained language and contact-aware structure. Bimanual experiments demonstrate improved performance and instruction following, including control over object identity, acting gripper, target location, and spatial relations absent from original labels.

cs.RO↗

arXiv2026

AMBIT: Anticipatory Multimodal Body Recruitment for Bimanual Tracking on a Humanoid

A humanoid with 5-DoF arms cannot track generic bimanual end-effector trajectories with its arms alone; pelvis and waist motion must be recruited, but which motion, and when, is not uniquely determined. On a Unitree R1 in fixed double support, the set of dynamically valid recruitment strategies (pelvis pose and waist trajectories) for a task is a diverse continuous manifold, and a deterministic regressor trained on it mode-averages into strategies valid only 35% of the time, against 52% for a conditional variational autoencoder (CVAE) and 82% for the best of 16 CVAE samples. We introduce AMBIT: the CVAE proposes strategies from a preview of the commanded trajectory, a non-learned selector filters, ranks and verifies them, and a receding-horizon loop commits to one with hysteresis. The committed strategy is the reference of the same whole-body differential-IK QP a reactive tracker runs, which keeps authority over residual error. On 160 held-out episodes that admit a valid strategy, in full MuJoCo dynamics under a torque controller, AMBIT reaches 85% success at a 3 cm/15 deg tolerance against 74% for the tracker (disjoint confidence intervals) and recruits the body before the arms saturate in 48% of episodes against 35%. Because diversity is preserved, constraints unknown at training time are enforced by selection alone: under five zero-shot shifts AMBIT beats the warm-started tracker on every shift and matches a test-time re-optimisation baseline 17x more expensive. On a Unitree G1, with hyperparameters unchanged, the protocol reproduces the structure of the valid set and widens the gap over the tracker to 0.85 against 0.53. Five selected strategies execute on the externally supported physical R1, distinct in pelvis excursion and tracking the planned end-effector motion to a median of 11 mm by encoder forward kinematics, which establishes kinematic realisability, not balance.

cs.RO↗

arXiv2026

The Talking Robot: Distortion-Robust Acoustic Models for Robot-Robot Communication

We present Artoo, a learned acoustic communication system for robots that replaces hand-designed signal processing with end-to-end co-trained neural networks. Our system pairs a lightweight text-to-speech (TTS) transmitter (1.18M parameters) with a conformer-based automatic speech recognition (ASR) receiver (938K parameters), jointly optimized through a differentiable channel. Unlike human speech, robot-to-robot communication is paralinguistics-free: the system need not preserve timbre, prosody, or naturalness, only maximize decoding accuracy under channel distortion. Through a three-phase co-training curriculum, the TTS transmitter learns to produce distortion-robust acoustic encodings that surpass the baseline under noise, achieving 8.3% CER at 0 dB SNR. The entire system requires only 2.1M parameters (8.4 MB) and runs in under 13 ms end-to-end on a CPU, making it suitable for deployment on resource-constrained robotic platforms.

cs.RO↗

arXiv2024

Automatic marker-free registration based on similar tetrahedras for single-tree point clouds

In recent years, terrestrial laser scanning technology has been widely used to collect tree point cloud data, aiding in measurements of diameter at breast height, biomass, and other forestry survey data. Since a single scan from terrestrial laser systems captures data from only one angle, multiple scans must be registered and fused to obtain complete tree point cloud data. This paper proposes a marker-free automatic registration method for single-tree point clouds based on similar tetrahedras. First, two point clouds from two scans of the same tree are used to generate tree skeletons, and key point sets are constructed from these skeletons. Tetrahedra are then filtered and matched according to similarity principles, with the vertices of these two matched tetrahedras selected as matching point pairs, thus completing the coarse registration of the point clouds from the two scans. Subsequently, the ICP method is applied to the coarse-registered leaf point clouds to obtain fine registration parameters, completing the precise registration of the two tree point clouds. Experiments were conducted using terrestrial laser scanning data from eight trees, each from different species and with varying shapes. The proposed method was evaluated using RMSE and Hausdorff distance, compared against the traditional ICP and NDT methods. The experimental results demonstrate that the proposed method significantly outperforms both ICP and NDT in registration accuracy, achieving speeds up to 593 times and 113 times faster than ICP and NDT, respectively. In summary, the proposed method shows good robustness in single-tree point cloud registration, with significant advantages in accuracy and speed compared to traditional ICP and NDT methods, indicating excellent application prospects in practical registration scenarios.

cs.CV↗

arXiv2024

WLC-Net: a robust and fast deep-learning wood-leaf classification method

Wood-leaf classification is an essential and fundamental prerequisite in the analysis and estimation of forest attributes from terrestrial laser scanning (TLS) point clouds,including critical measurements such as diameter at breast height(DBH),above-ground biomass(AGB),wood volume.To address this,we introduce the Wood-Leaf Classification Network(WLC-Net),a deep learning model derived from PointNet++,designed to differentiate between wood and leaf points within tree point clouds.WLC-Net enhances classification accuracy,completeness,and speed by incorporating linearity as an inherent feature,refining the input-output framework,and optimizing the centroid sampling technique.WLC-Net was trained and assessed using three distinct tree species datasets,comprising a total of 102 individual tree point clouds:21 Chinese ash trees,21 willow trees,and 60 tropical trees.For comparative evaluation,five alternative methods,including PointNet++,DGCNN,Krishna Moorthy's method,LeWoS, and Sun's method,were also applied to these datasets.The classification accuracy of all six methods was quantified using three metrics:overall accuracy(OA),mean Intersection over Union(mIoU),and F1-score.Across all three datasets,WLC-Net demonstrated superior performance, achieving OA scores of 0.9778, 0.9712, and 0.9508;mIoU scores of 0.9761, 0.9693,and 0.9141;and F1-scores of 0.8628, 0.7938,and 0.9019,respectively.The time costs of WLC-Net were also recorded to evaluate the efficiency.The average processing time was 102.74s per million points for WLC-Net.In terms of visual inspect,accuracy evaluation and efficiency evaluation,the results suggest that WLC-Net presents a promising approach for wood-leaf classification,distinguished by its high accuracy. In addition,WLC-Net also exhibits strong applicability across various tree point clouds and holds promise for further optimization.

cs.CV↗