arXiv subjects

Hannes Hübener

Publications and source records attributed to Hannes Hübener.

At least 37 records · Page 2Linked to original sources

arXiv2022

Controlling Floquet states on ultrashort time scales

The advent of ultrafast laser science offers the unique opportunity to combine Floquet engineering with extreme time resolution, further pushing the optical control of matter into the petahertz domain. However, what is the shortest driving pulse for which Floquet states can be realised remains an unsolved matter, thus limiting the application of Floquet theory to pulses composed by many optical cycles. Here we ionized Ne atoms with few-femtosecond pulses of selected time duration and show that a Floquet state can be established already within 10 cycles of the driving field. For shorter pulses, down to 2 cycles, the finite lifetime of the driven state can still be explained using an analytical model based on Floquet theory. By demonstrating that the population of the Floquet sidebands can be controlled not only with the driving laser pulse intensity and frequency, but also by its duration, our results add a new lever to the toolbox of Floquet engineering.

physics.optics↗

arXiv2022

Time- and angle-resolved photoelectron spectroscopy of strong-field light-dressed solids: prevalence of the adiabatic band picture

In recent years, strong-field physics in condensed-matter was pioneered as a novel approach for controlling material properties through laser-dressing, as well as for ultrafast spectroscopy via nonlinear light-matter interactions (e.g. harmonic generation). A potential controversy arising from these advancements is that it is sometimes vague which band-picture should be used to interpret strong-field experiments: the field-free bands, the adiabatic (instantaneous) field-dressed bands, Floquet bands, or some other intermediate picture. We here try to resolve this issue by performing 'theoretical experiments' of time- and angle-resolved photoelectron spectroscopy (Tr-ARPES) for a strong-field laser-pumped solid, which should give access to the actual observable bands of the irradiated material. To our surprise, we find that the adiabatic band-picture survives quite well, up to high field intensities (~10^12 W/cm^2), and in a wide frequency range (driving wavelengths of 4000 to 800nm, with Keldysh parameters ranging up to ~7). We conclude that to first order, the adiabatic instantaneous bands should be the standard blueprint for interpreting ultrafast electron dynamics in solids when the field is highly off-resonant with characteristic energy scales of the material. We then discuss weaker effects of modifications of the bands beyond this picture that are non-adiabatic, showing that by using bi-chromatic fields the deviations from the standard picture can be probed with enhanced sensitivity. Our work outlines a clear band picture for the physics of strong-field interactions in solids, which should be useful for designing and analyzing strong-field experimental observables and also to formulate simpler semi-empirical models.

cond-mat.mtrl-sci↗

arXiv2022

Floquet engineering the band structure of materials with optimal control theory

We demonstrate that the electronic structure of a material can be deformed into Floquet pseudo-bands with arbitrarily tailored shapes. We achieve this goal with a novel combination of quantum optimal control theory and Floquet engineering. The power and versatility of this framework is demonstrated here by utilizing the independent-electron tight-binding description of the $π$ electronic system of graphene. We show several prototype examples focusing on the region around the K (Dirac) point of the Brillouin zone: creation of a gap with opposing flat valence and conduction bands, creation of a gap with opposing concave symmetric valence and conduction bands -- which would correspond to a material with an effective negative electron-hole mass --, or closure of the gap when departing from a modified graphene model with a non-zero field-free gap. We employ time periodic drives with several frequency components and polarizations, in contrast to the usual monochromatic fields, and use control theory to find the amplitudes of each component that optimize the shape of the bands as desired. In addition, we use quantum control methods to find realistic switch-on pulses that bring the material into the predefined stationary Floquet band structure, i.e. into a state in which the desired Floquet modes of the target bands are fully occupied, so that they should remain stroboscopically stationary, with long lifetimes, when the weak periodic drives are started. Finally, we note that although we have focused on solid state materials, the technique that we propose could be equally used for the Floquet engineering of ultracold atoms in optical lattices, and to other non-equilibrium dynamical and correlated systems.

cond-mat.mes-hall↗

arXiv2022

Multiple mobile excitons manifested as sidebands in quasi-one-dimensional metallic TaSe3

Charge neutrality and their expected itinerant nature makes excitons potential transmitters of information. However, exciton mobility remains inaccessible to traditional optical experiments that only create and detect excitons with negligible momentum. Here, using angle-resolved photoemission spectroscopy, we detect dispersing excitons in the quasi-one-dimensional metallic trichalcogenide, TaSe3. The low density of conduction electrons and the low dimensionality in TaSe3 combined with a polaronic renormalization of the conduction band and the poorly screened interaction between these polarons and photo-induced valence holes leads to various excitonic bound states that we interpret as intrachain and interchain excitons, and possibly trions. The thresholds for the formation of a photo-hole together with an exciton appear as side valence bands with dispersions nearly parallel to the main valence band, but shifted to lower excitation energies. The energy separation between side and main valence bands can be controlled by surface doping, enabling the tuning of certain exciton properties.

cond-mat.str-el↗

arXiv2022

Common microscopic origin of the phase transitions in Ta$_2$NiS$_5$ and the excitonic insulator candidate Ta$_2$NiSe$_5$

The structural phase transition in Ta$_2$NiSe$_5$ has been envisioned as driven by the formation of an excitonic insulating phase. However, the role of structural and electronic instabilities on crystal symmetry breaking has yet to be disentangled. Meanwhile, the phase transition in its complementary material Ta$_2$NiS$_5$ does not show any experimental hints of an excitonic insulating phase. We present a microscopic investigation of the electronic and phononic effects involved in the structural phase transition in Ta$_2$NiSe$_5$ and Ta$_2$NiS$_5$ using extensive first-principles calculations. In both materials the crystal symmetries are broken by phonon instabilities, which in turn lead to changes in the electronic bandstructure also observed in experiment. A total energy landscape analysis shows no tendency towards a purely electronic instability and we find that a sizeable lattice distortion is needed to open a bandgap. We conclude that an excitonic instability is not needed to explain the phase transition in both Ta$_2$NiSe$_5$ and Ta$_2$NiS$_5$.

cond-mat.mtrl-sci↗

arXiv2021

First-principles modelling for time-resolved ARPES under different pump-probe conditions

First-principles methods for time-resolved angular resolved photoelectron spectroscopy play a pivotal role in providing interpretation and microscopic understanding of the complex experimental data and in exploring novel observables or observation conditions that may be achieved in future experiments. Here we describe an efficient, reliable and scalable first-principles method for tr-ARPES based on time-dependent density functional theory including propagation and surface effects usually discarded in the widely used many-body techniques based on computing the non-equilibrium spectral function and discuss its application to a variety of pump-probe conditions. We identify four conditions, depending on the length of the probe relative to the excitation in the materials on the one hand and on the overlap between pump and probe on the other hand. Within this paradigm different examples of observables of time-resolved ARPES are discussed in view of the newly developed and highly accurate time-resolved experimental spectroscopies.

cond-mat.mtrl-sci↗

arXiv2021

Floquet Engineering of Magnetism in Topological Insulator Thin Films

Dynamic manipulation of magnetism in topological materials is demonstrated here via a Floquet engineering approach using circularly polarized light. Increasing the strength of the laser field, besides the expected topological phase transition, the magnetically doped topological insulator thin film also undergoes a magnetic phase transition from ferromagnetism to paramagnetism, whose critical behavior strongly depends on the quantum quenching. In sharp contrast to the equilibrium case, the non-equilibrium Curie temperatures vary for different time scale and experimental setup, not all relying on change of topology. Our discoveries deepen the understanding of the relationship between topology and magnetism in the non-equilibrium regime and extend optoelectronic device applications to topological materials.

cond-mat.mes-hall↗

arXiv2021

Phonoritons in a monolayer hBN optical cavity

A phonoriton is an elementary excitation that is predicted to emerge from hybridization between exciton, phonon and photon. Besides the intriguing many-particle structure, phonoritons are of interest as they could serve as functional nodes in devices that utilize electronic, phononic and photonic elements for energy conversion and thermal transport applications. Although phonoritons are predicted to emerge in an excitonic medium under intense electromagnetic wave irradiation, the stringent condition for their existence has eluded direct observation in solids. In particular, on-resonance, intense pumping scheme has been proposed but excessive photoexcitation of carriers prevents optical detection. Here we theoretically predict the appearance of phonoritonic features in monolayer hexagonal boron nitride (hBN) embedded in an optical cavity. The coherent superposition nature of phonoriton states is evidenced by the hybridization of exciton-polariton branches with phonon replicas that is tunable by the cavity-matter coupling strength. This finding simultaneously provides an experimental pathway to observe the predicted phonoritons and opens a new avenue for tuning materials properties.

cond-mat.mtrl-sci↗

arXiv2021

The Ferroelectric Photo-Groundstate of SrTiO$_3$: Cavity Materials Engineering

Optical cavities confine light on a small region in space which can result in a strong coupling of light with materials inside the cavity. This gives rise to new states where quantum fluctuations of light and matter can alter the properties of the material altogether. Here we demonstrate, based on first principles calculations, that such light-matter coupling induces a change of the collective phase from quantum paraelectric to ferroelectric in the SrTiO$_3$ groundstate, which has thus far only been achieved in out-of-equilibrium strongly excited conditions[1, 2]. This is a light-matter-hybrid groundstate which can only exist because of the coupling to the vacuum fluctuations of light, a "photo-groundstate". The phase transition is accompanied by changes in the crystal structure, showing that fundamental groundstate properties of materials can be controlled via strong light-matter coupling. Such a control of quantum states enables the tailoring of materials properties or even the design of novel materials purely by exposing them to confined light.

cond-mat.mtrl-sci↗

arXiv2021

The quantum paraelectric phase of SrTiO$_3$ from first principles

We demonstrate how the quantum paraelectric ground state of SrTiO$_3$ can be accessed via a microscopic $ab~initio$ approach based on density functional theory. At low temperature the quantum fluctuations are strong enough to stabilize the paraelectric phase even though a classical description would predict a ferroelectric phase. We find that accounting for quantum fluctuations of the lattice and for the strong coupling between the ferroelectric soft mode and lattice elongation is necessary to achieve quantitative agreement with experimental frequency of the ferroelectric soft mode. The temperature dependent properties in SrTiO$_3$ are also well captured by the present microscopic framework.

cond-mat.mtrl-sci↗

arXiv2020

Strong chiral dichroism in above threshold ionization and ionization rates from locally-chiral light

We derive here a new highly selective photoelectron-based chirality-sensing technique that utilizes 'locally-chiral' laser pulses. We show that this approach results in strong chiral discrimination, where the standard forwards/backwards asymmetry of photoelectron circular dichroism (PECD) is lifted. The resulting dichroism is much larger and more robust than conventional PECD, is found in all hemispheres, and is not symmetric or antisymmetric with respect to any symmetry operator. Remarkably, a CD of up to 10% survives in the angularly-integrated above-threshold ionization (ATI) spectra, and of up to 5% in the total ionization rates. We demonstrate these results through ab-initio calculations in the chiral molecules Bromochlorofluoromethane, Limonene, Fenchone, and Camphor. We also explore the parameter-space of the locally-chiral field and show that the observed CD is strongly correlated to the degree of chirality of the light, validating it as a measure for chiral-interaction strengths. Our results pave the way for highly selective probing of ultrafast chirality in ATI, can potentially lead to all-optical enantio-separation, and motivate the use of locally-chiral light for enhancing ultrafast spectroscopies.

physics.chem-ph↗

arXiv2020

Nonlinear phononics in 2D SnTe: a ferroelectric material with phonon dynamical amplification of electric polarization

Ultrafast optical control of ferroelectricity using intense terahertz fields has attracted significant interest. Here we show that the nonlinear interactions between two optical phonons in SnTe, a two-dimensional in-plane ferroelectric material, enables a dynamical amplification of the electric polarization within subpicoseconds time domain. Our first principles time dependent simulations show that the infrared-active out-of-plane phonon mode, pumped to nonlinear regimes, spontaneously generates in-plane motions, leading to rectified oscillations in the in-plane electric polarization. We suggest that this dynamical control of ferroelectric material, by nonlinear phonon excitation, can be utilized to achieve ultrafast control of the photovoltaic or other non-linear optical responses.

cond-mat.mtrl-sci↗

arXiv2020

Unravelling the intertwined atomic and bulk nature of localised excitons by attosecond spectroscopy

The electro-optical properties of most semiconductors and insulators of technological interest are dominated by the presence of electron-hole quasiparticles called excitons. The manipulation of these hydrogen-like quasi-particles in dielectrics, has received great interest under the name excitonics that is expected to be of great potential for a variety of applications, including optoelectronics and photonics. A crucial step for such exploitation of excitons in advanced technological applications is a detailed understanding of their dynamical nature. However, the ultrafast processes unfolding on few-femtosecond and attosecond time scales, of primary relevance in view of the desired extension of electronic devices towards the petahertz regime, remain largely unexplored. Here we apply attosecond transient reflection spectroscopy in a sequential two-foci geometry and observe sub-femtosecond dynamics of a core-level exciton in bulk MgF$_2$ single crystals. With our unique setup, we can access absolute phase delays which allow for an unambiguous comparison with theoretical calculations based on the Wannier-Mott model. Our results show that excitons surprisingly exhibit a dual atomic- and solid-like character which manifests itself on different time scales. While the former is responsible for a femtosecond optical Stark effect, the latter dominates the attosecond excitonic response and originates by the interaction with the crystal. Further investigation of the role of exciton localization proves that the bulk character persists also for strongly localised quasi-particles and allows us to envision a new route to control exciton dynamics in the close-to-petahertz regime.

physics.optics↗

arXiv2020

Nature of symmetry breaking at the excitonic insulator transition: Ta$_2$NiSe$_5$

Ta$_2$NiSe$_5$ is one of the most promising materials for hosting an excitonic insulator ground state. While a number of experimental observations have been interpreted in this way, the precise nature of the symmetry breaking occurring in Ta$_2$NiSe$_5$, the electronic order parameter, and a realistic microscopic description of the transition mechanism are, however, missing. By a symmetry analysis based on first-principles calculations, we uncover the \emph{discrete} lattice symmetries which are broken at the transition. We identify a purely electronic order parameter of excitonic nature that breaks these discrete crystal symmetries and contributes to the experimentally observed lattice distortion from an orthorombic to a monoclinic phase. Our results provide a theoretical framework to understand and analyze the excitonic transition in Ta$_2$NiSe$_5$ and settle the fundamental questions about symmetry breaking governing the spontaneous formation of excitonic insulating phases in solid-state materials.

cond-mat.mtrl-sci↗

arXiv2020

Direct measurement of electron-phonon coupling with time-resolved ARPES

Time and angular resolved photoelectron spectroscopy is a powerful technique to measure electron dynamics in solids. Recent advances in this technique have facilitated band and energy resolved observations of the effect that excited phonons, have on the electronic structure. Here, we show with the help of \textit{ab initio} simulations that the Fourier analysis of time-resolved measurements of solids with excited phonon modes leads, in fact, to an observation of the band- and mode-resolved electron-phonon coupling directly from the experimental data and without need for theoretical computations.

cond-mat.mtrl-sci↗

arXiv2020

How Circular Dichroism in time- and angle-resolved photoemission can be used to spectroscopically detect transient topological states in graphene

Pumping graphene with circularly polarized light is the archetype of light-tailoring topological bands. Realizing the induced Floquet-Chern insulator state and tracing clear experimental manifestions has been a challenge, and it has become clear that scattering effects play a crucial role. We tackle this gap between theory and experiment by employing microscopic quantum kinetic calculations including realistic electron-electron and electron-phonon scattering. Our theory provides a direct link to the build-up of the Floquet-Chern insulator state in light-driven graphene and its detection in time- and angle-resolved photoemission spectroscopy (ARPES). This allows us to study the stability of the Floquet features due to dephasing and thermalization effects. We also discuss the ultrafast Hall response in the laser-heated state. Furthermore, the induced pseudospin texture and the associated Berry curvature gives rise to momentum-dependent orbital magnetization, which is reflected in circular dichroism in ARPES (CD-ARPES). Combining our nonequilibrium calculations with an accurate one-step theory of photoemission allows us to establish a direct link between the build-up of the topological state and the dichroic pump-probe photoemission signal. The characteristic features in CD-ARPES are further corroborated to be stable against heating and dephasing effects. Thus, tracing circular dichroism in time-resolve photoemission provides new insights into transient topological properties.

cond-mat.mtrl-sci↗

arXiv2019

Octopus, a computational framework for exploring light-driven phenomena and quantum dynamics in extended and finite systems

Over the last years extraordinary advances in experimental and theoretical tools have allowed us to monitor and control matter at short time and atomic scales with a high-degree of precision. An appealing and challenging route towards engineering materials with tailored properties is to find ways to design or selectively manipulate materials, especially at the quantum level. To this end, having a state-of-the-art ab initio computer simulation tool that enables a reliable and accurate simulation of light-induced changes in the physical and chemical properties of complex systems is of utmost importance. The first principles real-space-based Octopus project was born with that idea in mind, providing an unique framework allowing to describe non-equilibrium phenomena in molecular complexes, low dimensional materials, and extended systems by accounting for electronic, ionic, and photon quantum mechanical effects within a generalized time-dependent density functional theory framework. The present article aims to present the new features that have been implemented over the last few years, including technical developments related to performance and massive parallelism. We also describe the major theoretical developments to address ultrafast light-driven processes, like the new theoretical framework of quantum electrodynamics density-functional formalism (QEDFT) for the description of novel light-matter hybrid states. Those advances, and other being released soon as part of the Octopus package, will enable the scientific community to simulate and characterize spatial and time-resolved spectroscopies, ultrafast phenomena in molecules and materials, and new emergent states of matter (QED-materials).

physics.comp-ph↗

arXiv2019

Floquet analysis of excitations in materials

Controlled excitation of materials can transiently induce changed or novel properties with many fundamental and technological implications. Especially, the concept of Floquet engineering, manipulation of the electronic structure via dressing with external lasers, has attracted some recent interest. Here we review the progress made in defining Floquet materials properties and give a special focus on their signatures in experimental observables as well as considering recent experiments realizing Floquet phases in solid state materials. We discuss how a wide range of experiments with non-equilibrium electronic structure can be viewed by employing Floquet theory as an analysis tool providing a different view of excitations in solids.

cond-mat.mtrl-sci↗