arXiv subjects

Hannu-Pekka Komsa

Publications and source records attributed to Hannu-Pekka Komsa.

30 records · Page 2Linked to original sources

arXiv2019

Electronic and Magnetic Characterization of Epitaxial VSe$_2$ Monolayers on Superconducting NbSe$_2$

Vertical integration of two-dimensional (2D) van der Waals (vdW) materials with different quantum ground states is predicted to lead to novel electronic properties that are not found in the constituent layers. Here, we present the direct synthesis of superconductor-magnet hybrid heterostructures by combining superconducting niobium diselenide (NbSe$_2$) with the monolayer (ML) vanadium diselenide (VSe$_2$). More significantly, the in-situ growth in ultra-high vacuum (UHV) allows to produce a clean and an atomically sharp interfaces. Combining different characterization techniques and density-functional theory (DFT) calculations, we investigate the electronic and magnetic properties of VSe$_2$ on NbSe$_2$. Low temperature scanning tunneling microscopy (STM) measurements demonstrate a reduction of the superconducting gap on VSe$_2$ layer. This together with the lack of charge density wave signatures indicates magnetization of the sheet, but not of a conventional itinerant ferromagnet.

cond-mat.mtrl-sci↗

arXiv2019

Substitutional Si impurities in monolayer hexagonal boron nitride

We report the first observation of substitutional silicon atoms in single-layer hexagonal boron nitride (h-BN) using aberration corrected scanning transmission electron microscopy (STEM). The medium angle annular dark field (MAADF) images reveal silicon atoms exclusively filling boron vacancies. This structure is stable enough under electron beam for repeated imaging. Density functional theory (DFT) is used to study the energetics, structure and properties of the experimentally observed structure. The formation energies of all possible charge states of the different silicon substitutions (Si$_\mathrm{B}$, Si$_\mathrm{N}$ and Si$_\mathrm{BN}$) are calculated. The results reveal Si$_\mathrm{B}^{+1}$ as the most stable substitutional configuration. In this case, silicon atom elevates by 0.66Å out of the lattice with unoccupied defect levels in the electronic band gap above the Fermi level. The formation energy shows a slightly exothermic process. Our results unequivocally show that heteroatoms can be incorporated into the h-BN lattice opening way for applications ranging from single-atom catalysis to atomically precise magnetic structures.

cond-mat.mtrl-sci↗

arXiv2019

Tomonaga-Luttinger liquid in a box: electrons confined within MoS$_2$ mirror twin boundaries

Two- or three-dimensional metals are usually well described by weakly interacting, fermionic quasiparticles. This concept breaks down in one dimension due to strong Coulomb interactions. There, low-energy electronic excitations are expected to be bosonic collective modes, which fractionalize into independent spin and charge density waves. Experimental research on one-dimensional metals is still hampered by their difficult realization, their limited accessibility to measurements, and by competing or obscuring effects such as Peierls distortions or zero bias anomalies. Here we overcome these difficulties by constructing a well-isolated, one-dimensional metal of finite length present in MoS$_2$ mirror twin boundaries. Using scanning tunneling spectroscopy we measure the single-particle density of the interacting electron system as a function of energy and position in the 1D box. Comparison to theoretical modeling provides unambiguous evidence that we are observing spin-charge separation in real space.

cond-mat.str-el↗

arXiv2019

Efficient method for calculating Raman spectra of solids with impurities and alloys and its application to two-dimensional transition metal dichalcogenides

Raman spectroscopy is a widely used, powerful, and nondestructive tool for studying the vibrational properties of bulk and low-dimensional materials. Raman spectra can be simulated using first-principles methods, but due to the high computational cost calculations are usually limited only to fairly small unit cells, which makes it difficult to carry out simulations for alloys and defects. Here, we develop an efficient method for simulating Raman spectra of alloys, benchmark it against full density-functional theory calculations, and apply it to several alloys of two-dimensional transition metal dichalcogenides. In this method, the Raman tensor for the supercell mode is constructed by summing up the Raman tensors of the pristine system weighted by the projections of the supercell vibrational modes to those of the pristine system. This approach is not limited to 2D materials and should be applicable to any crystalline solids with defects and impurities. To efficiently evaluate vibrational modes of very large supercells, we adopt mass approximation, although it is limited to chemically and structurally similar atomic substitutions. To benchmark our method, we first apply it to Mo$_x$W$_{(1-x)}$S$_2$ monolayer in the H-phase, where several experimental reports are available for comparison. Second, we consider Mo$_x$W$_{(1-x)}$Te$_2$ in the T'-phase, which has been proposed to be 2D topological insulator, but where experimental results for the monolayer alloy are still missing. We show that the projection scheme also provides a powerful tool for analyzing the origin of the alloy Raman-active modes in terms of the parent system eigenmodes. Finally, we examine the trends in characteristic Raman signatures for dilute concentrations of impurities in MoS$_2$.

cond-mat.mtrl-sci↗

arXiv2019

Momentum Conserved Ultrafast Charge Transfer Dynamics of Interlayer Excitons in vdW Heterostructures

Heterostructures comprising van der Waals (vdW) stacked transition metal dichalcogenide (TMDC) monolayers are a fascinating class of two-dimensional (2D) materials with unique properties. The presence of interlayer excitons, where the electron and the hole remain spatially separated in the two layers due to ultrafast charge transfer, is an intriguing feature of these heterostructures. Inevitably, the efficiency of 2D heterostructure devices is critically dependent on the charge transfer dynamics. However, the role of the relative rotation angle of the constituent layers on this charge transfer dynamics is hitherto unknown. Here, we investigate MoS$_2$/WSe$_2$ vdW heterostructures (hMWs) using monochromated low-loss electron energy loss (EEL) spectroscopy combined with aberration-corrected scanning transmission electron microscopy (STEM), and report that momentum conservation is a critical factor in the charge transfer dynamics of TMDC vdW heterostructures. The low-loss EEL spectra of the heterostructures with various rotation angles reveal that the charge transfer rate can be about one order-of-magnitude faster in the aligned (or anti-aligned) case than the misaligned cases. These results provide a deeper insight into the role of the fundamental principle of momentum conservation in 2D vdW heterostructure charge transfer dynamics.

cond-mat.mes-hall↗

arXiv2018

Thermal Transport in MoS$_2$ from Molecular Dynamics using Different Empirical Potentials

Thermal properties of molybdenum disulfide (MoS$_2$) have recently attracted attention related to fundamentals of heat propagation in strongly anisotropic materials, and in the context of potential applications to optoelectronics and thermoelectrics. Multiple empirical potentials have been developed for classical molecular dynamics (MD) simulations of this material, but it has been unclear which provides the most realistic results. Here, we calculate lattice thermal conductivity of single- and multi-layer pristine MoS$_2$ by employing three different thermal transport MD methods: equilibrium, nonequilibrium, and homogeneous nonequilibrium ones. These methods allow us to verify the consistency of our results and also facilitate comparisons with previous works, where different schemes have been adopted. Our results using variants of the Stillinger-Weber potential are at odds with some previous ones and we analyze the possible origins of the discrepancies in detail. We show that, among the potentials considered here, the reactive empirical bond order (REBO) potential gives the most reasonable predictions of thermal transport properties as compared to experimental data. With the REBO potential, we further find that isotope scattering has only a small effect on thermal conduction in MoS$_2$ and the in-plane thermal conductivity decreases with increasing layer number and saturates beyond about three layers. We identify the REBO potential as a transferable empirical potential for MD simulations of MoS$_2$ which can be used to study thermal transport properties in more complicated situations such as in systems containing defects or engineered nanoscale features. This work establishes a firm foundation for understanding heat transport properties of MoS$_2$ using MD simulations.

cond-mat.mtrl-sci↗

arXiv2015

Binding energies of exciton complexes in transition metal dichalcogenides and effect of dielectric environment

Excitons, trions, biexcitons, and exciton-trion complexes in two-dimensional transition metal dichalcogenide sheets of MoS$_2$, MoSe$_2$, MoTe$_2$, WS$_2$ and WSe$_2$ are studied by means of density functional theory and path integral Monte Carlo method in order to accurately account for the particle-particle correlations. In addition, the effect of dielectric environment on the properties of these exciton complexes is studied by modifying the effective interaction potential between particles. Calculated exciton and trion binding energies are consistent with previous experimental and computational studies, and larger systems such as biexciton and exciton-trion complex are found highly stable. Binding energies of biexcitons are similar or higher than those of trions, but the binding energy of the trion depends significantly stronger on the dielectric environment than that of biexciton. Therefore, as a function of an increasing dielectric constant of the environment the exciton-trion complex "dissociates" to a biexciton rather than to an exciton and a trion.

cond-mat.mes-hall↗

arXiv2013

Properties of Individual Dopant Atoms in Single-Layer MoS2: Atomic Structure, Migration, and Enhanced Reactivity

The differences in the behavior of Re (n-type) and Au (p-type) dopant atoms in single-layered MoS2 were investigated by in situ scanning transmission electron microscopy. Re atoms tend to occupy Mo sites, while Au atoms exist as adatoms and show larger mobility under the electron beam. Re substituted to Mo site showed enhanced chemical affinity, evidenced by agglomeration of Re adatoms around these sites. This may explain the difficulties in achieving a high compositional rate of homogeneous Re doping in MoS2. In addition, an in situ coverage experiment together with density functional theory calculations discovered a high surface reactivity and agglomeration of other impurity atoms such as carbon at the Re doped sites.

cond-mat.mtrl-sci↗

arXiv2013

Electronic structures and optical properties of realistic transition metal dichalcogenide heterostructures from first principles

We calculate from first principles the electronic structure and optical properties of a number of transition metal dichalcogenide (TMD) bilayer heterostructures consisting of MoS2 layers sandwiched with WS2, MoSe2, MoTe2, BN, or graphene sheets. Contrary to previous works, the systems are constructed in such a way that the unstrained lattice constants of the constituent incommensurate monolayers are retained. We find strong interaction between the Γ-point states in all TMD/TMD heterostructures, which can lead to an indirect gap. On the other hand, states near the K-point remain as in the monolayers. When TMDs are paired with BN or graphene layers, the interaction around Γ-point is negligible, and the electronic structure resembles that of two independent monolayers. Calculations of optical properties of the MoS2/WS2 system show that even when the valence and conduction band edges are located in different layers, the mixing of optical transitions is minimal, and the optical characteristics of the monolayers are largely retained in these heterostructures. The intensity of interlayer transitions is found to be negligibly small, a discouraging result for engineering the optical gap of TMDs by heterostructuring.

cond-mat.mes-hall↗

arXiv2012

Two-dimensional transition metal dichalcogenides under electron irradiation: defect production and doping

Using first-principles atomistic simulations, we study the response of atomically-thin layers of transition metal dichalcogenides (TMDs) - a new class of two-dimensional inorganic materials with unique electronic properties - to electron irradiation. We calculate displacement threshold energies for atoms in 21 different compounds and estimate the corresponding electron energies required to produce defects. For a representative structure of MoS2, we carry out high-resolution transmission electron microscopy experiments and validate our theoretical predictions via observations of vacancy formation under exposure to a 80 keV electron beam. We further show that TMDs can be doped by filling the vacancies created by the electron beam with impurity atoms. Thereby, our results not only shed light on the radiation response of a system with reduced dimensionality, but also suggest new ways for engineering the electronic structure of TMDs.

cond-mat.mtrl-sci↗

arXiv2009

Comparison of charged-defect finite-size supercell correction methods in a general framework

Starting from the total energy expressions within density functional theory, we are able to perform a comparison of several currently used charged-defect finite-size supercell correction schemes in a unified manner. This approach also provides a framework for a further development of corrections not only for DFT supercell calculations, but also for more advanced methods and for complex geometries. The comparison is performed for three separate defect cases: a gallium vacancy in GaAs, a beryllium interstitial in GaAs and a vacancy in diamond. We found two methods working sufficiently well for all three cases: a method which is very similar to one presented by Freysoldt, and a slightly altered potential alignment method.

cond-mat.mes-hall↗

arXiv2008

Band offset determination of the GaAs/GaAsN interface using the DFT method

The GaAs/GaAsN interface band offset is calculated from first principles. The electrostatic potential at the core regions of the atoms is used to estimate the interface potential and align the band structures obtained from respective bulk calculations. First, it is shown that the present method performs well on the well-known conventional/conventional AlAs/GaAs (001) superlattice system. Then the method is applied to a more challenging nonconventional/conventional GaAsN/GaAs (001) system, and consequently type I band lineup and valence-band offset of about 35 meV is obtained for nitrogen concentration of about 3 %, in agreement with the recent experiments. We also investigate the effect of strain on the band lineup. For the GaAsN layer longitudinally strained to the GaAs lattice constant, the type II lineup with a nearly vanishing band offset is found, suggesting that the anisotropic strain along the interface is the principal cause for the often observed type I lineup.

cond-mat.mtrl-sci↗