arXiv subjects

Hans D. Schotten

Publications and source records attributed to Hans D. Schotten.

At least 163 records · Page 9Linked to original sources

arXiv2022

Downtime Optimized Live Migration of Industrial Real-Time Control Services

Live migration of services is a prerequisite for various use cases that must be fulfilled for the realization of Industry 4.0. In addition, many different types of services need to provide mobility and consequently need to be migrated live. These can be offloaded algorithms from mobile devices, such as unmanned vehicles or robots, security services, communication services or classic control tasks. In particular, the latter place very high demands on determinism and latency. Here, it is of utmost importance that the downtime of the service is as low as possible. Since existing live migration approaches try to optimize multiple metrics such as downtime, migration time as well as energy consumption, which are equally relevant in the IT domain, it is not possible to use any of these approaches without adoptions. Therefore, a novel concept is proposed that builds on top of both existing migration approaches as well as virtualization technologies and aims primarily at minimizing service downtime. Furthermore, the concept is evaluated using a test environment. The results show that a sub-millisecond downtime can be achieved with the proposed concept. Moreover, the total migration time is in the range of several hundred milliseconds for the highest performance setting and two seconds for a non-invasive approach.

cs.NI↗

arXiv2022

5G Network Slice Isolation

This article reveals an adequate comprehension of basic defense, security challenges, 2 and attack vectors in deploying multi-network slicing. Network slicing is a revolutionary concept 3 of providing mobile network on-demand and expanding mobile networking business and services 4 to a new era. The new business paradigm and service opportunities are encouraging vertical 5 industries to join and develop their own mobile network capabilities for enhanced performances 6 that are coherent with their applications. However, a number of security concerns are also raised 7 in this new era. In this article, we focus on the deployment of multi-network slicing with multi8 tenancy. We identify the security concerns, and discuss about the defense approaches such as 9 network slice isolation and insulation in a multi-layer network slicing security model. Also, we 10 identify the importance to appropriately select the network slice isolation points, and propose 11 a generic framework to optimize the isolation policy regarding the implementation cost while 12 guaranteeing the security and performance requirements.

cs.CR↗

arXiv2021

Time-Energy-Constrained Closed-Loop FBL Communication for Dependable MEC

The deployment of multi-access edge computing (MEC) is paving the way towards pervasive intelligence in future 6G networks. This new paradigm also proposes emerging requirements of dependable communications, which goes beyond the ultra-reliable low latency communication (URLLC), focusing on the performance of a closed loop instead of that of an unidirectional link. This work studies the simple but efficient one-shot transmission scheme, investigating the closed-loop-reliability-optimal policy of blocklength allocation under stringent time and energy constraints.

cs.IT↗

arXiv2021

Mobility prediction Based on Machine Learning Algorithms

Nowadays mobile communication is growing fast in the 5G communication industry. With the increasing capacity requirements and requirements for quality of experience, mobility prediction has been widely applied to mobile communication and has becoming one of the key enablers that utilizes historical traffic information to predict future locations of traffic users, Since accurate mobility prediction can help enable efficient radio resource management, assist route planning, guide vehicle dispatching, or mitigate traffic congestion. However, mobility prediction is a challenging problem due to the complicated traffic network. In the past few years, plenty of researches have been done in this area, including Non-Machine-Learning (Non-ML)- based and Machine-Learning (ML)-based mobility prediction. In this paper, firstly we introduce the state of the art technologies for mobility prediction. Then, we selected Support Vector Machine (SVM) algorithm, the ML algorithm for practical traffic date training. Lastly, we analyse the simulation results for mobility prediction and introduce a future work plan where mobility prediction will be applied for improving mobile communication.

cs.LG↗

arXiv2021

An Adaptive Honeypot Configuration, Deployment and Maintenance Strategy

Since honeypots first appeared as an advanced network security concept they suffer from poor deployment and maintenance strategies. State-of-the-Art deployment is a manual process in which the honeypot needs to be configured and maintained by a network administrator. In this paper we present a method for a dynamic honeypot configuration, deployment and maintenance strategy based on machine learning techniques. Our method features an identification mechanism for machines and devices in a network. These entities are analysed and clustered. Based on the clusters, honeypots are intelligently deployed in the network. The proposed method needs no configuration and maintenance and is therefore a major advantage for the honeypot technology in modern network security.

cs.CR↗

arXiv2021

Towards Organic 6G Networks: Virtualization and Live Migration of Core Network Functions

In the context of Industry 4.0, more and more mobile use cases are appearing on industrial factory floors. These use cases place high demands on various quantitative requirements, such as latency, availability, and more. In addition, qualitative requirements such as flexibility are arising. Since virtualization technology is a key enabler for the flexibility that is required by novel use cases and on the way to organic networking as it is addressed by 6G, we investigate container virtualization technology in this paper. We focus on container technology since OS-level virtualization has multiple benefits compared to hardware virtualization, such as VMs. Thus, we discuss several aspects of container based virtualization, e.g. selection of suitable network drivers and orchestration tools, with respect to most important 5GC functions. In addition, the functions have different quantitative or qualitative requirements depending on whether they are stateless or stateful, and whether the specific function is located at either the control or user plane. Therefore, we also analyze the aforementioned live migration concepts for the 5GC functions and evaluate them based on well-defined metrics, such as migration time and process downtime.

cs.NI↗

arXiv2021

CLARQ: A Dynamic ARQ Solution for Ultra-high Closed-loop Reliability

Emerging wireless control applications demand for extremely high closed-loop reliability under strict latency constraints, which the conventional Automatic Repeat reQuest (ARQ) solutions with static schedules fail to provide. To overcome this issue and enable data-link layer error control for ultra reliable low-latency communication (URLLC) services, we propose a novel protocol: the Closed-Loop ARQ (CLARQ), which forces to accomplish an information exchange round within a fixed loop-back latency, and dynamically re-allocates the remaining resource between uplink and downlink slots upon the result of last uplink transmission. The proposed method guarantees to meet the latency requirement, while delivering high communication reliability and power efficiency. It can be efficiently offline optimized by means of dynamic programming techniques, and is capable of real-time deployment with a low-cost implementation based on look-up tables. Numerical evaluations have verified that CLARQ outperforms baselines with significantly improved closed-loop reliability and reduced energy consumption. Especially, over a Rayleigh channel with 0dB mean SNR, it is able to provide a closed-loop error rate below 1e-7 within 10ms loop-back latency, which makes our proposal competitive for practical URLLC applications in future 5G-and-beyond networks.

cs.IT↗

arXiv2021

Fairness for Freshness: Optimal Age of Information Based OFDMA Scheduling with Minimal Knowledge

It is becoming increasingly clear that an important task for wireless networks is to minimize the age of information (AoI), i.e., the timeliness of information delivery. While mainstream approaches generally rely on the real-time observation of user AoI and channel state, there has been little attention to solve the problem in a complete (or partial) absence of such knowledge. In this article, we present a novel study to address the optimal blind radio resource scheduling problem in orthogonal frequency division multiplexing access (OFDMA) systems towards minimizing long-term average AoI, which is proven to be the composition of time-domain-fair clustered round-robin and frequency-domain-fair intra-cluster sub-carrier assignment. Heuristic solutions that are near-optimal as shown by simulation results are also proposed to effectively improve the performance upon presence of various degrees of extra knowledge, e.g., channel state and AoI.

cs.IT↗

arXiv2021

Computation Offloading at Field Level: Motivation and Break-Even Point Calculation

Smart manufacturing has the objective of creating highly flexible and resource optimized industrial plants. Furthermore, the improvement of product quality is another important target. These requirements implicate more complex control algo-rithms. Processing these algorithms may exceed the capabilities of resource constrained devices, such as programmable logic controllers (PLCs). In this case, the necessity for computation offloading is given. Due to the fact that industrial plants are currently designed for a life-cycle-time of more than ten years, in a realistic smart manufacturing scenario, these devices have to be considered. Therefore, we investigate the impact of complex algorithms on conventional PLCs by simulating them with a load generator. In addition, we propose a realistic factory scenario including benchmarks for both wireline and wireless communication systems. Thus, their round-trip time (RTT) is measured with and without additional load on the network. With the help of these investigations, break-even points for the application of computation offloading of two typical PLCs of Siemens S7 series can be calculated.

cs.NI↗

arXiv2021

Extending Reference Broadcast Infrastructure Synchronization Protocol in IEEE 802.11 as Enabler for the IIoT

Realizing the industrial Internet of Things, more andmore mobile use cases will emerge in the industrial landscape,requiring both novel concepts and smooth integration into legacydeployments.Since accurate time synchronization is particularly challengingfor wireless devices, we propose a concept for simple but accuratesynchronization in IEEE 802.11 wireless local area network thatextends the Reference Broadcast Infrastructure Synchronizationprotocol, and a suitable integration of IEEE 802.1AS that is partof the IEEE time-sensitive networking standards. In addition,the concept is evaluated with a testbed using commercial off-the-shelf hardware and a realistic discrete automation demonstratorequipped mostly with industrial components. By using the afore-mentioned devices for wireless communications, this concept canbe directly applied in existing industrial solutions, thus achievingthe proposed results. It is shown that the achieved synchronicity issuitable for a wide range of mandatory mobile use cases, which aremost important for a fully functional industrial Internet of Things.

cs.NI↗

arXiv2021

How Should Network Slice Instances be Provided to Multiple Use Cases of a Single Vertical Industry?

There are a large number of vertical industries implementing multiple use cases, each use case characterized by diverging service, network, and connectivity requirements such as automobile, manufacturing, power grid, etc. Such heterogeneity cannot be effectively managed and efficiently mapped onto a single type of network slice instance (NSI). Thus the tailored provisioning of an end-to-end network slicing solution to a vertical industry that consists of multiple use cases is a critical issue, which motivates this article, aimed at exploring this never-addressed and challenging research problem by proposing the Use-case Specific Network Slicing and the SubNetwork Slicing concepts that enable the provisioning of Use-case-specific NSI(US-NSI) and GeNeric NSI(GN-NSI), respectively. Both approaches tackle the same technical issue of provisioning, management, and orchestration of per vertical per use case NSIs in order to improve resource allocation and enhance network performance. The article also presents the architectural frameworks for managing US-NSI and GN-NSI, which extend the service deployment concept and system architecture of network slicing for vertical customers of fifth-generation (5G) mobile networks.

cs.NI↗

arXiv2021

Edge-Assisted Congestion Control Mechanism for 5G Network Using Software-Defined Networking

In order to cope with the explosive growth of data traffic which is associated with a wide plethora of emerging applications and services that are expected to be used by both ordinary users and vertical industries, the congestion control mechanism is considered to be vital. In this paper, we proposed a congestion control mechanism that could function within the framework of Multi-Access Edge Computing (MEC). The proposed mechanism is aiming to make real-time decisions for selectively buffering traffic while taking network condition and Quality of Service (QoS) into consideration. In order to support a MEC-assisted scheme, the MEC server is expected to locally store delay-tolerant data traffics until the delay conditions expire. This enables the network to have better control over the radio resource provisioning of higher priority data. To achieve this, we introduced a dedicated function known as Congestion Control Engine (CCE), which can capture Radio Access Network (RAN) condition through Radio Network Information Service (RNIS) function, and use this knowledge to make the real-time decision for selectively offloading traffic so that it can perform more intelligently. Analytical evaluation results of our proposed mechanism confirm that it can alleviate network congestion more efficiently.

cs.NI↗

arXiv2021

AI-Empowered VNF Migration as a Cost-Loss-Effective Solution for Network Resilience

With a wide deployment of Multi-Access Edge Computing (MEC) in the Fifth Generation (5G) mobile networks, virtual network functions (VNF) can be flexibly migrated between difference locations, and therewith significantly enhances the network resilience to counter the degradation in quality of service (QoS) due to network function outages. A balance has to be taken carefully, between the loss reduced by VNF migration and the operations cost generated thereby. To achieve this in practical scenarios with realistic user behavior, it calls for models of both cost and user mobility. This paper proposes a novel cost model and a AI-empowered approach for a rational migration of stateful VNFs, which minimizes the sum of operations cost and potential loss caused by outages, and is capable to deal with the complex realistic user mobility patterns.

cs.NI↗

arXiv2021

Feasibility Study on Virtual Process Controllers as Basis for Future Industrial Automation Systems

Industry 4.0 offers many possibilities for creating highly efficient and flexible manufacturing. To create such advantages, highly automated and thus digitized processes and systems are required. Here, most technologies known from the office floor are basically suitable for these tasks, but cannot meet the high demands of industrial use cases. Therefore, they cannot replace industrial technologies and devices that have performed well over decades "out of the box". For this reason, many technologies known from the office floor are being investigated and adapted for industrial environments. An important task is the virtualization of process controls, as more and more devices use computation offloading, e.g. due to limited resources. In this paper we extend the work on our novel architecture that enables numerous use cases and meets industrial requirements by virtualizing process controllers. In addition, a testbed based on a factory scenario is proposed to evaluate the most important features of the presented architecture.

cs.NI↗

arXiv2021

An Abstracted Survey on 6G: Drivers, Requirements, Efforts, and Enablers

As of today, 5G mobile systems have been already widely rolled out, it is the right time for academia and industry to explore the next generation mobile communication system beyond 5G. To this end, this paper provides an abstracted survey for the 6G mobile system. We shed light on the key driving factors for 6G through predicting the growth trend of mobile traffic and mobile service subscriptions until the year of 2030, envisioning the potential use cases and applications, as well as deriving the potential use scenarios. Then, a number of key performance indicators to support the 6G use cases are identified and their target values are estimated in a quantitatively manner, which is compared with those of 5G clearly in a visualized way. An investigation of the efforts spent on 6G research in different countries and institutions until now is summarized, and a potential roadmap in terms of the definition, specification, standardization, and spectrum regulation is given. Finally, an introduction to potential key 6G technologies is provided. The principle, technical advantages, challenges, and open research issues for each identified technology are discussed.

cs.NI↗

arXiv2020

Application of Virtualization Technologies in Novel Industrial Automation: Catalyst or Show-Stopper?

Industry 4.0 describes an adaptive and changeable production, where its factory cells have to be reconfigured at very short intervals, e.g. after each workpiece. Furthermore, this scenario cannot be realized with traditional devices, such as programmable logic controllers. Here the use of well-proven technologies of the information technology are conquering the production hall (IT-OT convergence). Therefore, both virtualization and novel communication technologies are being introduced in the field of industrial automation. In addition, these technologies are seen as the key for facilitating various emerging use cases. However, it is not yet clear whether each of the dedicated hardware and software components, which have been developed for specific control tasks and have performed well over decades, can be upgraded without major adjustments. In this paper, we examine the opportunities and challenges of hardware and operating system-level virtualization based on the stringent requirements imposed by industrial applications. For that purpose, benchmarks for different virtualization technologies are set by determining their computational and networking overhead, configuration effort, accessibility, scalability, and security.

cs.NI↗

arXiv2020

Introduction of an Architecture for Flexible Future Process Control Systems as Enabler for Industry 4.0

The term Industry 4.0, which refers to the fourth industrial revolution, aims at the digitalization of industries, including all kinds of production assets. With the help of these, so-called industrial cyber-physical systems, which form the industrial Internet of Things, numerous novel use cases that are key enabler for a smart manufacturing, can be realized. However, existing facilities mainly consist of legacy equipment and technologies that do not offer these kind of flexibility. To address this issue, we introduce an architecture that allows a flexible reconfiguration and redeployment of future process control systems. Moreover, a high system availability and reliability, as required by industrial applications, has been taken into account. The architectural design follows the 4+1 model approach as it is available in the literature. This ensures, that the design results in a holistic architecture. Additionally, we provide insights into first results and outline future development steps.

cs.NI↗

arXiv2020

Analyzing Current Interference Situations of Connected Devices Using Context-Information and the Centralized Broker-Approach

The digitalization of manufacturing processes is leading to a highly increased amount of connected devices. In the course of this development a process was developed and implemented, which optimizes IEEE 802.11-systems relating to the interference situation by using context-information. This was realized by division into two fields. First of all, data providers calculate their own interference situation to determine the optimal frequency out of the ascertained data. In this case optimal means that the chosen channel should have the lowest interference power. In a second step these providers also calculating the interference information about all Service Set Identifier (SSID) in range. The measured data is then divided into the allowed radio channel. Afterwards the gathered information will be transferred to a central space. An already existing infrastructure is used as a initial point for the further process. As soon as the provider has transferred new data, a broker can inform connected users that there is an update in the inference situation. With this developed architecture an approach to face the hidden node problem is given. Additional a system for safety-critical information is implemented.

cs.NI↗