Searcharxiv⌕ Search

arXiv subjects

Hans Dieter Schotten

Publications and source records attributed to Hans Dieter Schotten.

At least 19 recordsLinked to original sources

Multiple Access in Pinching-Antenna Systems: A Survey, Impairment Analysis, and Evaluation

Pinching-antenna systems attach dielectric pinches to a waveguide, creating line-of-sight radiation points within a few meters of any user. The pinches on one waveguide, however, radiate the same signal, unlike a conventional array, where each element transmits a dedicated signal. Separating the signals of multiple users therefore becomes challenging and requires a new perspective on multiple access. Most existing studies rest on an idealized model, and no survey examines the access schemes under realistic impairments. This article surveys multiple access in pinching-antenna systems and organizes fifty-six works into a unified taxonomy by spatial degrees of freedom. The users of one waveguide can be separated only in time, frequency, power, or guided mode, while multiple waveguides add the space domain. The article then identifies the impairments critical to this separation, which perturb the effective channel, leak interference across orthogonal resources, or couple the pinches on the uplink, and summarizes them in an impairment-versus-method map. A unified evaluation of time-, frequency-, power-, and space-domain access under identical channel and impairment models reveals that the degradation is method specific. The analytical and numerical results give insight into multiple access in these systems and provide a basis for its impairment-aware design, a necessary step toward their adoption in practical networks.

cs.IT↗

Over-the-Top Resource Broker System for Split Computing: An Approach to Distribute Cloud Computing Infrastructure

6G network architectures will usher in a wave of innovative services and capabilities, introducing concepts like split computing and dynamic processing nodes. This implicates a paradigm where accessing resources seamlessly aligns with diverse processing node characteristics, ensuring a uniform interface. In this landscape, the identity of the operator becomes inconsequential, paving the way for a collaborative ecosystem where multiple providers contribute to a shared pool of resources. At the core of this vision is the guarantee of specific performance parameters, precisely tailored to the location and service requirements. A consistent layer, as the abstraction of the complexities of different infrastructure providers, is needed to simplify service deployment. One promising approach is the introduction of an over-the-top broker for resource allocation, which streamlines the integration of these services into the network and cloud infrastructure of the future. This paper explores the role of the broker in two split computing scenarios. By abstracting the complexities of various infrastructures, the broker proves to be a versatile solution applicable not only to cloud environments but also to networks and beyond. Additionally, a detailed discussion of a proof-of-concept implementation provides insights into the broker's actual architectural framework.

cs.DC↗

Hierarchical Cell-Free Massive MIMO: A Simplified Design for Uniform Service Quality

In traditional cellular networks, users at the cell edge often suffer from poor quality of service (QoS) due to large distance-dependent path loss and severe inter-cell interference. While cell-free (CF) massive multi-input multi-out (MIMO) mitigates this issue by distributing access points (APs) to ensure uniform QoS, the deployment of numerous distributed APs and a fronthaul network incurs high infrastructure costs. To balance performance and cost efficiency, this article proposes a simplified design called hierarchical cell-free (HCF) massive MIMO. The key idea is to reduce the number of APs, thus minimizing the scale of the fronthaul network. The antennas from the decommissioned APs are aggregated at a central base station (cBS), which also serves as the coordinator for distributed APs. We derive closed-form expressions for uplink and downlink spectral efficiency (SE) for HCF, CF, and cellular massive MIMO under pilot contamination and correlated fading channels, considering the use of multi-antenna APs. Numerical results confirm that the hierarchical architecture achieves $95\%$-likely per-user SE comparable to CF, enhancing cell-edge user rates in cellular systems by over 100 times, while significantly reducing the complexity and cost of the fronthaul network in CF. We develop max-min fairness algorithms for joint power control of the cBS and APs in the downlink, and the users in the uplink. These algorithms not only boost fairness and system capacity but also dramatically lower transmission power, e.g., achieving over $70\%$ savings in uplink, particularly beneficial for battery-powered mobile devices.

cs.IT↗

A Frequency-Domain Opportunistic Approach for Spectral-Efficient Cell-Free Massive MIMO

Constrained by weak signal strength and significant inter-cell interference, users located at the cell edge in a cellular network suffer from inferior service quality. Recently, cell-free massive MIMO (CFmMIMO) has gained considerable attention due to its capability to offer uniform quality of service, alleviating the cell-edge problem. In contrast to previous studies focused on narrow-band CFmMIMO systems, this paper studies wideband CFmMIMO communications against channel frequency selectivity. By exploiting the frequency-domain flexibility offered by orthogonal frequency-division multiplexing (OFDM), and leveraging a particular spatial characteristic in the cell-free structure -- namely, the near-far effect among distributed access points (APs) -- we propose an opportunistic approach to boost spectral efficiency. The core concept lies in opportunistically activating nearby APs for certain users across their assigned OFDM subcarriers while deactivating distant APs to prevent power wastage and lower inter-user interference. Furthermore, this approach enables the use of downlink pilots by reducing the number of active APs per subcarrier to a small subset, thereby substantially improving downlink performance through coherent detection at the user receiver. Verified by numerical results, our proposed approach demonstrates considerable performance improvement compared to the two benchmark approaches.

cs.IT↗

Latency optimized Deep Neural Networks (DNNs): An Artificial Intelligence approach at the Edge using Multiprocessor System on Chip (MPSoC)

Almost in every heavily computation-dependent application, from 6G communication systems to autonomous driving platforms, a large portion of computing should be near to the client side. Edge computing (AI at Edge) in mobile devices is one of the optimized approaches for addressing this requirement. Therefore, in this work, the possibilities and challenges of implementing a low-latency and power-optimized smart mobile system are examined. Utilizing Field Programmable Gate Array (FPGA) based solutions at the edge will lead to bandwidth-optimized designs and as a consequence can boost the computational effectiveness at a system-level deadline. Moreover, various performance aspects and implementation feasibilities of Neural Networks (NNs) on both embedded FPGA edge devices (using Xilinx Multiprocessor System on Chip (MPSoC)) and Cloud are discussed throughout this research. The main goal of this work is to demonstrate a hybrid system that uses the deep learning programmable engine developed by Xilinx Inc. as the main component of the hardware accelerator. Then based on this design, an efficient system for mobile edge computing is represented by utilizing an embedded solution.

cs.AR↗

Terahertz Communications and Sensing for 6G and Beyond: A Comprehensive Review

Next-generation cellular technologies, commonly referred to as the 6G, are envisioned to support a higher system capacity, better performance, and network sensing capabilities. The THz band is one potential enabler to this end due to the large unused frequency bands and the high spatial resolution enabled by the short signal wavelength and large bandwidth. Different from earlier surveys, this paper presents a comprehensive treatment and technology survey on THz communications and sensing in terms of advantages, applications, propagation characterization, channel modeling, measurement campaigns, antennas, transceiver devices, beamforming, networking, the integration of communications and sensing, and experimental testbeds. Starting from the motivation and use cases, we survey the development and historical perspective of THz communications and sensing with the anticipated 6G requirements. We explore the radio propagation, channel modeling, and measurement for the THz band. The transceiver requirements, architectures, technological challenges, and state-of-the-art approaches to compensate for the high propagation losses, including appropriate antenna design and beamforming solutions. We overview several related technologies that either are required by or are beneficial for THz systems and networks. The synergistic design of sensing and communications is explored in depth. Practical trials, demonstrations, and experiments are also summarized. The paper gives a holistic view of the current state of the art and highlights the open research challenges towards 6G and beyond.

eess.SP↗

Beam-Based Multiple Access for IRS-Aided Millimeter-Wave and Terahertz Communications

Recently, intelligent reflecting surface (IRS)-aided millimeter-wave (mmWave) and terahertz (THz) communications are considered in the wireless community. This paper aims to design a beam-based multiple-access strategy for this new paradigm. Its key idea is to make use of multiple sub-arrays over a hybrid digital-analog array to form independent beams, each of which is steered towards the desired direction to mitigate inter-user interference and suppress unwanted signal reflection. The proposed scheme combines the advantages of both orthogonal multiple access (i.e., no inter-user interference) and non-orthogonal multiple access (i.e., full time-frequency resource use). Consequently, it can substantially boost the system capacity, as verified by Monte-Carlo simulations.

cs.IT↗

Multi-User Reconfigurable Intelligent Surface-Aided Communications Under Discrete Phase Shifts

This paper focuses on studying orthogonal and non-orthogonal multiple access in intelligent reflecting surface (IRS)-aided systems. Unlike most prior works assuming continuous phase shifts, we employ the practical setup where only a finite number of discrete phase shifts are available. To maximize the sum rate, active beamforming and discrete reflection need to be jointly optimized. We therefore propose an alternative optimization method to get the optimal continuous phase shifts iteratively, and then quantize each phase shift to its nearest discrete value. The sum-rate maximization of different schemes is theoretically analyzed and numerically evaluated with different numbers of phase-control bits.

cs.IT↗

SCANTRAP: Protecting Content Management Systems from Vulnerability Scanners with Cyber Deception and Obfuscation

Every attack begins with gathering information about the target. The entry point for network breaches are often vulnerabilities in internet facing websites, which often rely on an off-the-shelf Content Management System (CMS). Bot networks and human attackers alike rely on automated scanners to gather information about the CMS software installed and potential vulnerabilities. To increase the security of websites using a CMS, it is desirable to make the use of CMS scanners less reliable. The aim of this work is to extend the current knowledge about cyber deception in regard to CMS. To demonstrate this, a WordPress Plugin called 'SCANTRAP' was created, which uses simulation and dissimulation in regards to plugins, themes, versions, and users. We found that the resulting plugin is capable of obfuscating real information and to a certain extent inject false information to the output of one of the most popular WordPress scanners, WPScan, without limiting the legitimate functionality of the WordPress installation.

cs.CR↗

Implementation and Evaluation of the RBIS Protocol in 5G

5G and 6G wireless communications allow for novel and disruptive applications. While 5G was strongly focused on improvements on QoS and QoS guarantees that are necessary for industrial deployments, 6G will have a disruptive impact on possible use cases. Here, nearly each use case requires time synchronization of the involved systems. While PTP in its variations, e.g. IEEE 1588 v2.1 or IEEE 802.1AS, has established as standard for wireline systems, time synchronization of wireless or hybrid systems is still subject to research. Thus, the so-called RBIS protocol, which was originally developed and investigated for Wi-Fi, is mapped to 5G. This is possible, because both systems are infrastructure based and a suitable broadcast that fits to the requirements of RBIS protocol can be found in the control layer of 5G NR. Even if the 1 microsecond requirement that is required by some applications is not yet cracked, the accuracy of 1.3 microseconds and precision of <4.3 microseconds for non-invasive extension of existing 5G deployments is highly promising.

cs.NI↗

On Explainability in AI-Solutions: A Cross-Domain Survey

Artificial Intelligence (AI) increasingly shows its potential to outperform predicate logic algorithms and human control alike. In automatically deriving a system model, AI algorithms learn relations in data that are not detectable for humans. This great strength, however, also makes use of AI methods dubious. The more complex a model, the more difficult it is for a human to understand the reasoning for the decisions. As currently, fully automated AI algorithms are sparse, every algorithm has to provide a reasoning for human operators. For data engineers, metrics such as accuracy and sensitivity are sufficient. However, if models are interacting with non-experts, explanations have to be understandable. This work provides an extensive survey of literature on this topic, which, to a large part, consists of other surveys. The findings are mapped to ways of explaining decisions and reasons for explaining decisions. It shows that the heterogeneity of reasons and methods of and for explainability lead to individual explanatory frameworks.

cs.AI↗

Performance Impact of Channel Aging and Phase Noise on Intelligent Reflecting Surface

This letter aims to clarify the impact of channel aging and phase noise on the performance of intelligent reflecting surface-aided wireless systems. We first model mathematically the outdated channel state information (CSI) due to Doppler shifts and phase noise stemming from hardware impairment. Then, a closed-form expression of achievable spectral efficiency under noisy and aged CSI is theoretically derived. Some typical simulation results to numerically demonstrate the performance impact are illustrated.

cs.IT↗

Dual-Beam Intelligent Reflecting Surface for Millimeter and THz Communications

Intelligent reflecting surface (IRS) is a cost-efficient technique to improve power efficiency and spectral efficiency. However, IRS-aided multi-antenna transmission needs to jointly optimize the passive and active beamforming, imposing a high computational burden and high latency due to its iterative optimization process. Making use of hybrid analog-digital beamforming in high-frequency transmission systems, a novel technique, coined dual-beam IRS, is proposed in this paper. The key idea is to form a pair of beams towards the IRS and user, respectively. Then, the optimization of passive and active beamforming can be decoupled, resulting in a simplified system design. Simulation results corroborate that it achieves a good balance between the cell-edge and cell-center performance. Compared with the performance bound, the gap is moderate, but it remarkably outperforms other sub-optimal schemes.

cs.IT↗

The Global State of Security in Industrial Control Systems: An Empirical Analysis of Vulnerabilities around the World

Operational Technology (OT)-networks and -devices, i.e. all components used in industrial environments, were not designed with security in mind. Efficiency and ease of use were the most important design characteristics. However, due to the digitisation of industry, an increasing number of devices and industrial networks is opened up to public networks. This is beneficial for administration and organisation of the industrial environments. However, it also increases the attack surface, providing possible points of entry for an attacker. Originally, breaking into production networks meant to break an Information Technology (IT)-perimeter first, such as a public website, and then to move laterally to Industrial Control Systems (ICSs) to influence the production environment. However, many OT-devices are connected directly to the Internet, which drastically increases the threat of compromise, especially since OT-devices contain several vulnerabilities. In this work, the presence of OT-devices in the Internet is analysed from an attacker's perspective. Publicly available tools, such as the search engine Shodan and vulnerability databases, are employed to find commonly used OT-devices and map vulnerabilities to them. These findings are grouped according to country of origin, manufacturer, and number as well as severity of vulnerability. More than 13000 devices were found, almost all contained at least one vulnerability. European and Northern American countries are by far the most affected ones.

cs.CR↗

The KICK-OFF of 6G Research Worldwide: An Overview

The fifth-generation (5G) mobile system is now being deployed across the world and the scale of 5G subscribers is growing quickly in many countries. The attention of academia and industry is increasingly shifting towards the sixth generation (6G) and many pioneering works are being kicked off, indicating an important milestone in the history of 6G. At this juncture, an overview of the current state of the art of 6G research and a vision of future communications are of great interest. This paper thus investigates up-to-date 6G research programs, ambitions, and main viewpoints of representative countries, institutions, and companies worldwide. Then, the key technologies are outlined and a vision on ``What 6G may look like?" is provided. This paper aims to serve as an enlightening guideline for interested researchers to quickly get an overview when kicking off their 6G research.

cs.IT↗

Security in Process: Visually Supported Triage Analysis in Industrial Process Data

Operation technology networks, i.e. hard- and software used for monitoring and controlling physical/industrial processes, have been considered immune to cyber attacks for a long time. A recent increase of attacks in these networks proves this assumption wrong. Several technical constraints lead to approaches to detect attacks on industrial processes using available sensor data. This setting differs fundamentally from anomaly detection in IT-network traffic and requires new visualization approaches adapted to the common periodical behavior in OT-network data. We present a tailored visualization system that utilizes inherent features of measurements from industrial processes to full capacity to provide insight into the data and support triage analysis by laymen and experts. The novel combination of spiral plots with results from anomaly detection was implemented in an interactive system. The capabilities of our system are demonstrated using sensor and actuator data from a real-world water treatment process with introduced attacks. Exemplary analysis strategies are presented. Finally, we evaluate effectiveness and usability of our system and perform an expert evaluation.

cs.CR↗

Cell-Free Massive MIMO-OFDM Transmission over Frequency-Selective Fading Channels

This letter presents and analyzes orthogonal frequency-division multiplexing (OFDM)-based multi-carrier transmission for cell-free massive multi-input multi-output (CFmMIMO) over frequency-selective fading channels. Frequency-domain conjugate beamforming, pilot assignment, and user-specific resource allocation are proposed. CFmMIMO-OFDM is scalable to serve a massive number of users and is flexible to offer diverse data rates for heterogeneous applications.

cs.IT↗

Impact of Channel Aging on Zero-Forcing Precoding in Cell-Free Massive MIMO Systems

In the context of cell-free massive multi-input multi-output (mMIMO), zero-forcing precoding (ZFP) requires the exchange of instantaneous channel state information and precoded data symbols via a fronthaul network. It causes considerable propagation and processing delays, which degrade performance. This letter analyzes the impact of channel aging on the performance of ZFP in cell-free mMIMO. The aging effects of not only user mobility but also phase noise are considered. Numerical results in terms of per-user spectral efficiency are illustrated.

cs.IT↗