arXiv subjects

Hans Hasse

Publications and source records attributed to Hans Hasse.

53 records · Page 3Linked to original sources

arXiv2013

Computational molecular engineering as an emerging technology in process engineering

The present level of development of molecular force field methods is assessed from the point of view of simulation-based engineering, outlining the immediate perspective for further development and highlighting the newly emerging discipline of Computational Molecular Engineering (CME) which makes basic research in soft matter physics fruitful for industrial applications. Within the coming decade, major breakthroughs can be reached if a research focus is placed on processes at interfaces, combining aspects where an increase in the accessible length and time scales due to massively parallel high-performance computing will lead to particularly significant improvements.

cs.DC↗

arXiv2013

Molecular modelling and simulation of electrolyte solutions, biomolecules, and wetting of component surfaces

Massively-parallel molecular dynamics simulation is applied to systems containing electrolytes, vapour-liquid interfaces, and biomolecules in contact with water-oil interfaces. Novel molecular models of alkali halide salts are presented and employed for the simulation of electrolytes in aqueous solution. The enzymatically catalysed hydroxylation of oleic acid is investigated by molecular dynamics simulation taking the internal degrees of freedom of the macromolecules into account. Thereby, Ewald summation methods are used to compute the long range electrostatic interactions. In systems with a phase boundary, the dispersive interaction, which is modelled by the Lennard-Jones potential here, has a more significant long range contribution than in homogeneous systems. This effect is accounted for by implementing the Janecek cutoff correction scheme. On this basis, the HPC infrastructure at the Steinbuch Centre for Computing was accessed and efficiently used, yielding new insights on the molecular systems under consideration.

cond-mat.soft↗

arXiv2013

The influence of the liquid slab thickness on the planar vapor-liquid interfacial tension

One of the long standing challenges in molecular simulation is the description of interfaces. On the molecular length scale, finite size effects significantly influence the properties of the interface such as its interfacial tension, which can be reliably investigated by molecular dynamics simulation of planar vapor-liquid interfaces. For the Lennard-Jones fluid, finite size effects are examined here by varying the thickness of the liquid slab. It is found that the surface tension and density in the center of the liquid region decreases significantly for thin slabs. The influence of the slab thickness on both the liquid density and the surface tension is found to scale with 1/S^3 in terms of the slab thickness S, and a linear correlation between both effects is obtained. The results corroborate the analysis of Malijevský and Jackson, J. Phys.: Cond. Mat. 24: 464121 (2012), who recently detected an analogous effect for the surface tension of liquid nanodroplets.

cond-mat.soft↗

arXiv2011

The excess equimolar radius of liquid drops

The curvature dependence of the surface tension is related to the excess equimolar radius of liquid drops, i.e., the deviation of the equimolar radius from that defined with the macroscopic capillarity approximation. Based on the Tolman [J. Chem. Phys. 17, 333 (1949)] approach and its interpretation by Nijmeijer et al. [J. Chem. Phys. 96, 565 (1991)], the surface tension of spherical interfaces is analysed in terms of the pressure difference due to curvature. In the present study, the excess equimolar radius, which can be obtained directly from the density profile, is used instead of the Tolman length. Liquid drops of the truncated-shifted Lennard-Jones fluid are investigated by molecular dynamics simulation in the canonical ensemble, with equimolar radii ranging from 4 to 33 times the Lennard-Jones size parameter sigma. In these simulations, the magnitudes of the excess equimolar radius and the Tolman length are shown to be smaller than sigma/2. Other methodical approaches, from which mutually contradicting findings have been reported, are critically discussed, outlining possible sources of inaccuracy.

cond-mat.soft↗

arXiv2011

Atomistic simulations of electrolyte solutions and hydrogels with explicit solvent models

Two of the most challenging tasks in molecular simulation consist in capturing the properties of systems with long-range interactions (e.g. electrolyte solutions) as well as systems containing large molecules such as hydrogels. For the development and optimization of molecular force fields and models, a large number of simulation runs have to be evaluated to obtain the sensitivity of the target properties with respect to the model parameters. The present work discusses force field development for electrolytes regarding thermodynamic properties of their aqueous solutions. Furthermore, simulations are conducted for the volume transition of hydrogels in the presence of electrolytes. It is shown that the properties of these complex systems can be captured by molecular simulation.

physics.chem-ph↗

arXiv2010

Development of models and methods for the molecular simulation of large systems and molecules

The most important factor for quantitative results in molecular dynamics simulation are well developed force fields and models. In the present work, the development of new models and the usage of force fields from the literature in large systems are presented. Both tasks lead to time consuming simulations that require massively parallel high performance computing. In the present work, new models for carbon dioxide and cyclohexanolare discussed and a new method for the model development is introduced. Force fields and models for the simulation of PNIPAAm hydrogel in pure water and sodium chloride solution are tested and verified and applied to the simulation of nucleation processes.

physics.comp-ph↗

arXiv2010

Contact angle dependence on the fluid-wall dispersive energy

Vapor-liquid menisci of the truncated and shifted Lennard-Jones fluid between parallel planar walls are investigated by molecular dynamics simulation. Thereby, the characteristic energy of the unlike dispersive interaction between fluid molecules and wall atoms is systematically varied to determine its influence on the contact angle. The temperature is varied as well, covering most of the range between the triple point temperature and the critical temperature of the bulk fluid. The transition between obtuse and acute angles is found to occur at a temperature-independent magnitude of the fluid-wall dispersive interaction energy. On the basis of the present simulation results, fluid-wall interaction potentials can be adjusted to contact angle measurements.

cond-mat.mes-hall↗

arXiv2010

Molecular modeling of hydrogen bonding fluids: Vapor-liquid coexistence and interfacial properties

A major challenge for molecular modeling consists in optimizing the unlike interaction potentials. In many cases, combination rules are generally suboptimal when accurate predictions of properties like the mixture vapor pressure are needed. However, the well known Lorentz-Berthelot rule performs quite well and can be used as a starting point. If more accurate results are required, it is advisable to adjust the dispersive interaction energy parameter. In the present study, mixture properties are explored for binary systems containing hydrogen bonding components. Furthermore, vapor-liquid interface cluster criteria and contact angles are discussed and remarks on computational details are given. Finally, a sterically accurate generic model for benzyl alcohol is introduced and evaluated.

physics.comp-ph↗

arXiv2010

The air pressure effect on the homogeneous nucleation of carbon dioxide by molecular simulation

Vapour-liquid equilibria (VLE) and the influence of an inert carrier gas on homogeneous vapour to liquid nucleation are investigated by molecular simulation for quaternary mixtures of carbon dioxide, nitrogen, oxygen, and argon. Canonical ensemble molecular dynamics simulation using the Yasuoka-Matsumoto method is applied to nucleation in supersaturated vapours that contain more carbon dioxide than in the saturated state at the dew line. Established molecular models are employed that are known to accurately reproduce the VLE of the pure fluids as well as their binary and ternary mixtures. On the basis of these models, also the quaternary VLE properties of the bulk fluid are determined with the Grand Equilibrium method. Simulation results for the carrier gas influence on the nucleation rate are compared with the classical nucleation theory (CNT) considering the "pressure effect" [Phys. Rev. Lett. 101: 125703 (2008)]. It is found that the presence of air as a carrier gas decreases the nucleation rate only slightly and, in particular, to a significantly lower extent than predicted by CNT. The nucleation rate of carbon dioxide is generally underestimated by CNT, leading to a deviation between one and two orders of magnitude for pure carbon dioxide in the vicinity of the spinodal line and up to three orders of magnitude in presence of air as a carrier gas. Furthermore, CNT predicts a temperature dependence of the nucleation rate in the spinodal limit, which cannot be confirmed by molecular simulation.

physics.ao-ph↗

arXiv2009

Poiseuille flow of liquid methane in nanoscopic graphite channels by molecular dynamics simulation

MD simulations of methane confined between graphite walls with up to 4,800,000 interaction sites, i.e., carbon atoms and methane molecules, are conducted, where the channel width is varied to include both the boundary-dominated regime and the transition to the continuum regime. This proves that MD can be used today to cover the entire range of characteristic lengths for which continuum methods fail.

cond-mat.mes-hall↗

arXiv2009

Prediction of Transport Properties by Molecular Simulation: Methanol and Ethanol and their mixture

Transport properties of liquid methanol and ethanol are predicted by molecular dynamics simulation. The molecular models for the alcohols are rigid, non-polarizable and of united-atom type. They were developed in preceding work using experimental vapor-liquid equilibrium data only. Self- and Maxwell-Stefan diffusion coefficients as well as the shear viscosity of methanol, ethanol and their binary mixture are determined using equilibrium molecular dynamics and the Green-Kubo formalism. Non-equilibrium molecular dynamics is used for predicting the thermal conductivity of the two pure substances. The transport properties of the fluids are calculated over a wide temperature range at ambient pressure and compared with experimental and simulation data from the literature. Overall, a very good agreement with the experiment is found. For instance, the self-diffusion coefficient and the shear viscosity are predicted with average deviations of less 8% for the pure alcohols and 12% for the mixture. The predicted thermal conductivity agrees in average within 5% with the experimental data. Additionally, some velocity and shear viscosity autocorrelation functions are presented and discussed. Radial distribution functions for ethanol are also presented. The predicted excess volume, excess enthalpy and the vapor-liquid equilibrium of the binary mixture methanol + ethanol are assessed and the vapor-liquid equilibrium agree well with experimental data.

physics.chem-ph↗

arXiv2009

Self-diffusion and binary Maxwell-Stefan diffusion coefficients of quadrupolar real fluids from molecular simulation

Self- and binary Maxwell-Stefan diffusion coefficients were determined by equilibrium molecular dynamics simulations with the Green-Kubo method. This study covers self-diffusion coefficients at liquid states for eight pure fluids, i.e. F$_2$, N$_2$, CO$_2$, CS$_2$, C$_2$H$_6$, C$_2$H$_4$, C$_2$H$_2$ and SF$_6$ as well as Maxwell-Stefan diffusion coefficients for three binary mixtures N$_2$+CO$_2$, N$_2$+C$_2$H$_6$ and CO$_2$+C$_2$H$_6$. The fluids were modeled by the two-center Lennard-Jones plus point-quadrupole pair potential, with parameters taken from previous work of our group which were determined solely on the basis of vapor-liquid equilibrium data. Self-diffusion coefficients are predicted with a statistical uncertainty less than 1% and they agree within 2% to 28% with the experimental data. The correction of the simulation data due to the finite size of the system increases the value of the self-diffusion coefficient typically by 10%. If this correction is considered, better agreement with the experimental data can be expected for most of the studied fluids. Maxwell-Stefan diffusion coefficients for three binary mixtures were also predicted, their statistical uncertainty is about 10%. These results were used to test three empirical equations to estimate Maxwell-Stefan diffusion coefficients in binary mixtures, i.e. the equations of Caldwell and Babb, of Darken, and of Vignes. The equations of Caldwell and Babb and of Vignes show qualitatively different behavior of the Maxwell-Stefan diffusion coefficient than that observed in the simulations. In agreement with previous work, the best results are obtained in all cases with the equation of Darken.

physics.chem-ph↗

arXiv2009

Comprehensive study of the vapour-liquid equilibria of the pure two-centre Lennard-Jones plus pointdipole fluid

Results of a systematic investigation of the vapour-liquid equilibria of 38 individual two-centre Lennard-Jones plus axial pointdipole model fluids (2CLJD) are reported over a range of reduced dipolar momentum 0 $\le μ^{*2} \le$ 20 and of reduced elongation 0 $\le$ L* $\le$ 1.0. Temperatures investigated are from about 55 % to about 95 % of the critical temperature of each fluid. The NpT+Test Particle Method is used for the generation of vapour pressures, saturated densities, and saturated enthalpies. For the lowest temperatures, these data are calculated with highly accurate chemical potentials obtained from the gradual insertion method. Critical temperatures $T*_c$ and densities $ρ*_c$ are obtained from Guggenheim's equations. Empirical correlations for critical data $T*_c$ and $ρ*_c$ as well as for saturated densities $ρ'*$, $ρ''*$, and vapour pressures $p*_σ$ are developed as global functions of the model parameters. They describe the simulation data generally within their statistical uncertainties. Critical pressures and acentric factors of the 2CLJD fluid can be calculated from these correlations. The present results are a sound basis for adjustments of the model parameters $μ^{*2}$, $L*$, $σ$, and $ε$ to experimental VLE data of real fluids.

physics.comp-ph↗

arXiv2009

Molecular modeling and simulation of thermophysical properties: Application to pure substances and mixtures

At the Institute for Thermodynamics and Thermal Process Engineering (ITT) about 100 molecular models for pure substances have been developed so far. These models reproduce vapor pressure, saturated liquid density, and enthalpy of vaporization with a technical accuracy of less than 5%, less than 1%, and less than 5% deviation compared to experimental data, respectively. Simulation results are outlined for the pure substances ethylene oxide and ammonia, demonstrating the outstanding predictive power of the applied methods. Secondly, nucleation processes are discussed. Underlying effects on are studied on the molecular level.

physics.comp-ph↗

arXiv2009

A set of molecular models based on quantum mechanical ab initio calculations and thermodynamic data

A parameterization strategy for molecular models on the basis of force fields is proposed, which allows a rapid development of models for small molecules by using results from quantum mechanical (QM) ab initio calculations and thermodynamic data. The geometry of the molecular models is specified according to the atom positions determined by QM energy minimization. The electrostatic interactions are modeled by reducing the electron density distribution to point dipoles and point quadrupoles located in the center of mass of the molecules. Dispersive and repulsive interactions are described by Lennard-Jones sites, for which the parameters are iteratively optimized to experimental vapor-liquid equilibrium (VLE) data, i.e. vapor pressure, saturated liquid density, and enthalpy of vaporization of the considered substance. The proposed modeling strategy was applied to a sample set of ten molecules from different substance classes. New molecular models are presented for iso-butane, cyclohexane, formaldehyde, dimethyl ether, sulfur dioxide, dimethyl sulfide, thiophene, hydrogen cyanide, acetonitrile, and nitromethane. Most of the models are able to describe the experimental VLE data with deviations of a few percent.

physics.chem-ph↗

arXiv2009

Homogeneous nucleation in supersaturated vapors of methane, ethane, and carbon dioxide predicted by brute force molecular dynamics

Molecular dynamics (MD) simulation is applied to the condensation process of supersaturated vapors of methane, ethane, and carbon dioxide. Simulations of systems with up to a million particles were conducted with a massively parallel MD program. This leads to reliable statistics and makes nucleation rates down to the order of 10^30/(m^3 s) accessible to the direct simulation approach. Simulation results are compared to the classical nucleation theory (CNT) as well as the theory of Laaksonen, Ford, and Kulmala (LFK) which introduces a size dependence of the specific surface energy. CNT describes the nucleation of ethane and carbon dioxide excellently over the entire studied temperature range, whereas LFK provides a better approach to methane at low temperatures.

physics.chem-ph↗

arXiv2009

Modification of the classical nucleation theory based on molecular simulation data for surface tension, critical nucleus size, and nucleation rate

Nucleation in supersaturated vapor is investigated with two series of molecular dynamics simulations in the canonical ensemble. The applied methods are: (a) analysis of critical nuclei at moderate supersaturations by simulating equilibria of single droplets with surrounding vapors in small systems; (b) simulation of homogeneous nucleation during condensation with large systems containing 10^5 to 10^6 particles for calculating the nucleation rate of vapors at high supersaturations. For the Lennard-Jones fluid, truncated and shifted at 2.5 times the size parameter, it is shown that the classical nucleation theory underestimates both the nucleation rate and the size of the critical nucleus. A surface property corrected modification of this theory is proposed to consistently cover data on the surface tension of the curved interface, the critical nucleus size, and the nucleation rate.

physics.chem-ph↗