arXiv subjects

Haomin Song

Publications and source records attributed to Haomin Song.

4 recordsLinked to original sources

arXiv2020

Graded nanocomposite metamaterials for a double-sided radiative cooling architecture with a record breaking cooling power density

As an emerging electricity-free cooling technology, radiative cooling employs outer space as the heat sink. With this, a sky-facing thermal emitter is usually required. Due to the black-body radiation limit at ambient temperature, the maximum cooling power density for a single-faced radiative cooling device is ~156.9 W/m2. Here we report a double-sided radiative cooling architecture using graded nanocomposite metamaterials (GNM) designed for a vertically aligned thermal emitter. This GNM structure possesses an optical absorption of over 90% throughout the solar spectrum, and exceeds 90% reflection in the mid-infrared spectral region. With this configuration, both sides of a planar thermal emitter can be used to perform radiative cooling and a record cooling power density beyond 280 W/m2 was realized in a single thin-film thermal emitter. Under the standard pressure, we realized a temperature reduction of 14 degree Celsius below the ambient temperature in the laboratory environment, and over 12 degree Celsius in the outdoor test.

physics.app-ph↗

arXiv2018

Beam-controlled spectral-selective architecture with planar polydimethylsiloxane/metal-films for all-day radiative cooling

Radiative cooling is a passive cooling strategy with zero consumption of electricity. Although this technology can work well during optimal atmospheric conditions at nighttime, it is essential to achieve efficient radiative cooling during daytime when peak cooling demand actually occurs. In this article, we report an inexpensive planar polydimethylsiloxane (PDMS)/metal thermal emitter, i.e., a thin film structure fabricated using fast solution coating process that is scalable for large area manufacturing. By manipulating the beaming effect of the thermal radiation, temperature reduction of 9.5 °C and 11.0 °C were demonstrated in the laboratory and out-door environment, respectively. In addition, a spectral-selective solar shelter architecture was designed and implemented to suppress the solar input during the daytime. Due to the enhanced directionality of the thermal emission, the dependence of the radiative cooling performance on the surrounding environment was minimized. Out-door experiments were performed in Buffalo NY, realizing continuous all-day radiative cooling with an average power of ~120 W/m2 on a typical clear sunny day at Northern United States latitudes. This practical passive cooling strategy that cools without any electricity input could have a significant impact on global energy consumption.

physics.app-ph↗

arXiv2018

Nanocavity Induced Light Concentration for Energy Efficient Heat Assisted Magnetic Recording Media

Enhancing light absorption in the recording media layer can improve the energy efficiency and prolong the device lifetime in heat assisted magnetic recording (HAMR). In this work, we report the design and implementation of a resonant nanocavity structure to enhance the light-matter interaction within an ultrathin FePt layer. In a Ag/SiO2/FePt trilayer structure, the thickness of the dielectric SiO2 layer is systematically tuned to reach maximum light absorption at the wavelength of 830 nm. In the optimized structure, the light reflection is reduced by more than 50%. This results in effective laser heating of the FePt layer, as imaged by an infrared camera. The scheme is highly scalable for thinner FePt layers and shorter wavelengths to be used in future HAMR technologies.

physics.app-ph↗

arXiv2018

Accelerating vapor condensation with daytime radiative cooling

Vapor condensation plays a crucial role in solar water-purification technologies. Conventional condensers in solar water-purification systems do not provide sufficient cooling power for vapor condensation, limiting the water production rate to $0.4 L m^{-2} hour^{-1}$. On the other hand, radiative dew condensation, a technique used by existing radiative dew condensers, only works at nighttime and is incompatible with solar water-purification technologies. Here, we develop daytime radiative condensers that reflect almost all solar radiation, and can thus create dew water even in direct sunlight. Compared to state-of-art condensers, our daytime radiative condenser doubles the production of purified water over a 24-hour period. The integration of our daytime radiative condenser with solar water-purification systems can increase the water production rate in sunlight from $0.4 L m^{-2} hour^{-1}$ to more than $1 L m^{-2} hour^{-1}$.

physics.app-ph↗