arXiv subjects

Haoming Ding

Publications and source records attributed to Haoming Ding.

6 recordsLinked to original sources

arXiv2025

Surface Reduction Boosts Free Electron Concentration in MXene for Enhanced Photothermal Performance

The photothermal properties of MXenes originate from their high free electron concentration, which drives localized surface plasmon resonance (LSPR). However, their intrinsic electron concentration is limited by suboptimal d-orbital occupancy, while electronegative surface terminations actively deplete free electrons through orbital-selective withdrawal. Herein, we report a sodium (Na)-mediated surface reduction strategy in molten salts to transform Ti3C2Clx into electronically tunable Ti3C2. Specifically, Na atoms remove -Cl terminations to eliminate electron withdrawal and simultaneously inject electrons into the MXene lattice via a reduction reaction. This dual effect saturates Ti 3d-orbital vacancies while reducing surface coordination sites, achieving an increase in carrier concentration to 4.92-fold, an increase in mobility to 2.63-fold, and an enhancement in conductivity to 12.96-fold. Consequently, the optimized reduced MXene achieves a record photothermal conversion efficiency of 92.36% under 808 nm laser irradiation. As a proof-of-concept, a photothermal antibacterial woundplast with ultralow MXene content demonstrates a 91.39% bacterial kill rate. This work not only shows an effective way to tune the photothermal properties of MXenes but also inspires applications that require high electron concentration, such as energy storage, sensors, and electromagnetic interference shielding.

cond-mat.mtrl-sci↗

arXiv2022

Chemical-scissor-mediated structural editing of layered transition metal carbides

Intercalation of non-van der Waals (vdW) layered materials can produce new 2D and 3D materials with unique properties, but it is difficult to achieve. Here, we describe a structural editing protocol for 3D non-vdW layered ternary carbides and nitrides (MAX phases) and their 2D vdW derivatives (MXenes). Gap-opening and species-intercalating stages were mediated by chemical scissors and guest intercalants, creating a large family of layered materials with unconventional elements and structures in MAX phases, as well as MXenes with versatile termination species. Removal of surface terminations by metal scissors and stitching of carbide layers by metal atoms leads to a reverse transformation from MXenes to MAX phases, and metal-intercalated 2D carbides. This scissor-mediated structural editing may enable structural and chemical tailoring of other layered ceramics.

cond-mat.mtrl-sci↗

arXiv2021

Synthesis and thermal expansion of chalcogenide MAX phase Hf2SeC

Thermal expansion of MAX phases along different directions tended to be different because of the anisotropy of hexagonal crystals. Herein, a new Hf2SeC phase was synthesized and confirmed to be relatively isotropic, whose coefficients of thermal expansion (CTEs) were determined to be 9.73 {\mu}K-1 and 10.18 {\mu}K-1 along a and c directions. The strong M-S bond endowed Hf2SC and Zr2SC lower CTEs than Hf2SeC and Zr2SeC. A good relationship between the thermal expansion anisotropy and the ratio of elastic stiffness constant c11 and c33 was established. This straightforward approximation could be used to roughly predict the thermal expansion anisotropy of MAX phases.

cond-mat.mtrl-sci↗

arXiv2021

Near-Room-Temperature Ferromagnetic Behavior of Single-Atom-Thick 2D Iron in Nanolaminated Ternary MAX Phases

Two dimensional (2D) ferromagnetic materials have attracted much attention in the fields of condensed matter physics and materials science, but their synthesis is still a challenge given their limitations on structural stability and susceptibility to oxidization. MAX phases nanolaminated ternary carbides or nitrides possess a unique crystal structure in which single-atom-thick A sublayers are interleaved by two dimensional MX slabs, providing nanostructured templates for designing 2D ferromagnetic materials if the non-magnetic A sublayers can be substituted replaced by magnetic elements. Here, we report three new ternary magnetic MAX phases (Ta2FeC, Ti2FeN and Nb2FeC) with A sublayers of single-atom-thick 2D iron through an isomorphous replacement reaction of MAX precursors (Ta2AlC, Ti2AlN and Nb2AlC) with a Lewis acid salts (FeCl2). All these MAX phases exhibit ferromagnetic (FM) behavior. The Curie temperature (Tc) of Ta2FeC and Nb2FeC MAX phase are 281 K and 291 K, respectively, i.e. close to room temperature. The saturation magnetization of these ternary magnetic MAX phases is almost two orders of magnitude higher than that of V2(Sn,Fe)C MAX phase whose A-site is partial substituted by Fe. Theoretical calculations on magnetic orderings of spin moments of Fe atoms in these nanolaminated magnetic MAX phases reveal that the magnetism can be mainly ascribed to intralayer exchange interaction of the 2D Fe atomic layers. Owning to the richness in composition of MAX phases, there is a large compositional space for constructing functional single-atom-thick 2D layers in materials using these nanolaminated templates.

cond-mat.mtrl-sci↗

arXiv2020

Molten salt synthesis of a nanolaminated Sc2SnC MAX Phase

The MAX phases are a family of of ternary layered material with both metal and ceramic properties, and it is also precursor ma-terials for synthesis of two-dimensional MXenes. The theory predicted that there are more than 600 stable ternary layered MAX phases. At present, there are more than 80 kinds of ternary MAX phases synthesized through experiments, and few reports on MAX phases where M is a rare earth element. In this study, a new MAX phase Sc2SnC with rare earth element Sc at the M sites was synthesized through the reaction sintering of Sc, Sn, and C mixtures. Phase composition and microstructure of Sc2SnC were confirmed by X-ray diffraction, scanning electron microscopy and X-ray energy spectrum analysis. And structural stability, mechanical and electronic properties of Sc2SnC was investigated via density functional theory. This study open a door for ex-plore more unknown ternary layered rare earth compounds Ren+1SnCn (Re=Sc, Y, La-Nd, n=1) and corresponding rare earth MXenes.

cond-mat.mtrl-sci↗

arXiv2019

Synthesis of MAX Phases Nb2CuC and Ti2(Al0.1Cu0.9)N by A-site Replacement Reaction in Molten Salts

New MAX phases Ti2(AlxCu1-x)N and Nb2CuC were synthesized by A-site replacement by reacting Ti2AlN and Nb2AlC, respectively, with CuCl2 or CuI molten salt. X-ray diffraction, scanning electron microscopy, and atomically-resolved scanning transmission electron microscopy showed complete A-site replacement in Nb2AlC, which lead to formation of Nb2CuC. However, the replacement of Al in Ti2AlN phase was only close to complete at Ti2(Al0.1Cu0.9)N. Density-functional theory calculations corroborated the structural stability of Nb2CuC and Ti2CuN phases. Moreover, the calculated cleavage energy in these Cu-containing MAX phases are weaker than in their Al-containing counterparts, indicating that they are precursor candidates for MXene derivation.

cond-mat.mtrl-sci↗