arXiv subjects

Haozhe Lou

Publications and source records attributed to Haozhe Lou.

9 recordsLinked to original sources

arXiv2026

TactileStep: Sole Tactile Learning for Regulating Foot-Terrain Interaction in Humanoid Locomotion

Humanoid parkour policies can traverse various terrains, but task completion may mask challenges of harsh landings, edge contacts, and unstable stance contacts. Humans naturally regulate foot-terrain interaction through tactile feedback, modulating contact compliance according to terrain stiffness. This highlights a key domain gap between humans and humanoid robots: the absence of rich tactile sensing in most humanoid systems. We address this problem with TactileStep, a deployable tactile learning framework that brings sole pressure sensing into humanoid locomotion control for softer touchdowns and more stable support. TactileStep aligns tactile simulation with the real pressure insole, allowing the policy to learn from the same contact features available on hardware. During training, we use tactile and motion cues to recognize different foot-contact phases and apply phase-aware rewards that encourage safer landing and more stable stance. Evaluated in simulation and on a Unitree G1 humanoid across diverse terrains, TactileStep reduces peak touchdown force by up to 48.8% and peak A-weighted impact noise by up to 30.1 dB over a strong perceptive baseline, while increasing stance contact area by up to 23.8%.

cs.RO↗

arXiv2026

Echo in the Steps: Learning Perceptive Humanoid Parkour with Gated Memory

While recent advances in perceptive locomotion have enabled humanoid robots to traverse structured terrains, agile parkour in highly discontinuous environments remains an open challenge. In particular, crossing sparse footholds and narrow support regions requires precise foothold selection, effective use of visual observations, and consistent alternating foot placement during fast transitions. In this paper, we present a perceptive humanoid parkour framework that enables stable traversal across terrains with limited foothold availability using only onboard depth observations. The framework features a saliency-guided temporal perception module that combines a saliency prior with gated memory. It retains informative depth features across frames, enabling reliable foot placement from partial observations. By introducing an alternation loss, our symmetry regularization encourages alternating gait patterns and improves traversal robustness. Extensive experiments show that our method significantly improves success rate and foothold accuracy on challenging terrains in both simulation and the real world.

cs.RO↗

arXiv2026

InstantSfM: Towards GPU-Native SfM for the Deep Learning Era

Structure-from-Motion (SfM) is a fundamental technique for recovering camera poses and scene structure from multi-view imagery, serving as a critical upstream component for applications ranging from 3D reconstruction to modern neural scene representations such as 3D Gaussian Splatting. However, most mature SfM systems remain CPU-centric and built upon traditional optimization toolchains, creating a growing mismatch with modern GPU-based, learning-driven pipelines and limiting scalability in large-scale scenes. While recent advances in GPU-accelerated bundle adjustment (BA) have demonstrated the potential of parallel sparse optimization, extending these techniques to build a complete global SfM system remains challenging due to unresolved issues in metric scale recovery and numerical robustness. In this paper, we implement a fully GPU-based and PyTorch-compatible global SfM system, named InstantSfM, to integrate seamlessly with modern learning pipelines. InstantSfM embeds metric depth priors directly into both global positioning and BA through a depth-constrained Jacobian structure, thereby resolving scale ambiguity within the optimization framework. To ensure numerical stability, we employ explicit filtering of under-constrained variables for the Jacobian matrix in an optimized GPU-friendly manner. Extensive experiments on diverse datasets demonstrate that InstantSfM achieves state-of-the-art efficiency while maintaining reconstruction accuracy comparable to both established classical pipelines and recent learning-based methods, showing up to ${\sim40\times}$ speedup over COLMAP on large-scale scenes.

cs.CV↗

arXiv2026

D-REX: Differentiable Real-to-Sim-to-Real Engine for Learning Dexterous Grasping

Simulation provides a cost-effective and flexible platform for data generation and policy learning to develop robotic systems. However, bridging the gap between simulation and real-world dynamics remains a significant challenge, especially in physical parameter identification. In this work, we introduce a real-to-sim-to-real engine that leverages the Gaussian Splat representations to build a differentiable engine, enabling object mass identification from real-world visual observations and robot control signals, while enabling grasping policy learning simultaneously. Through optimizing the mass of the manipulated object, our method automatically builds high-fidelity and physically plausible digital twins. Additionally, we propose a novel approach to train force-aware grasping policies from limited data by transferring feasible human demonstrations into simulated robot demonstrations. Through comprehensive experiments, we demonstrate that our engine achieves accurate and robust performance in mass identification across various object geometries and mass values. Those optimized mass values facilitate force-aware policy learning, achieving superior and high performance in object grasping, effectively reducing the sim-to-real gap.

cs.RO↗

arXiv2025

Seeing the Wind from a Falling Leaf

A longstanding goal in computer vision is to model motions from videos, while the representations behind motions, i.e. the invisible physical interactions that cause objects to deform and move, remain largely unexplored. In this paper, we study how to recover the invisible forces from visual observations, e.g., estimating the wind field by observing a leaf falling to the ground. Our key innovation is an end-to-end differentiable inverse graphics framework, which jointly models object geometry, physical properties, and interactions directly from videos. Through backpropagation, our approach enables the recovery of force representations from object motions. We validate our method on both synthetic and real-world scenarios, and the results demonstrate its ability to infer plausible force fields from videos. Furthermore, we show the potential applications of our approach, including physics-based video generation and editing. We hope our approach sheds light on understanding and modeling the physical process behind pixels, bridging the gap between vision and physics. Please check more video results in our \href{https://chaoren2357.github.io/seeingthewind/}{project page}.

cs.CV↗

arXiv2025

The MOTIF Hand: A Robotic Hand for Multimodal Observations with Thermal, Inertial, and Force Sensors

Advancing dexterous manipulation with multi-fingered robotic hands requires rich sensory capabilities, while existing designs lack onboard thermal and torque sensing. In this work, we propose the MOTIF hand, a novel multimodal and versatile robotic hand that extends the LEAP hand by integrating: (i) dense tactile information across the fingers, (ii) a depth sensor, (iii) a thermal camera, (iv), IMU sensors, and (v) a visual sensor. The MOTIF hand is designed to be relatively low-cost (under 4000 USD) and easily reproducible. We validate our hand design through experiments that leverage its multimodal sensing for two representative tasks. First, we integrate thermal sensing into 3D reconstruction to guide temperature-aware, safe grasping. Second, we show how our hand can distinguish objects with identical appearance but different masses - a capability beyond methods that use vision only.

cs.RO↗

arXiv2025

RoboVerse: Towards a Unified Platform, Dataset and Benchmark for Scalable and Generalizable Robot Learning

Data scaling and standardized evaluation benchmarks have driven significant advances in natural language processing and computer vision. However, robotics faces unique challenges in scaling data and establishing evaluation protocols. Collecting real-world data is resource-intensive and inefficient, while benchmarking in real-world scenarios remains highly complex. Synthetic data and simulation offer promising alternatives, yet existing efforts often fall short in data quality, diversity, and benchmark standardization. To address these challenges, we introduce RoboVerse, a comprehensive framework comprising a simulation platform, a synthetic dataset, and unified benchmarks. Our simulation platform supports multiple simulators and robotic embodiments, enabling seamless transitions between different environments. The synthetic dataset, featuring high-fidelity physics and photorealistic rendering, is constructed through multiple approaches. Additionally, we propose unified benchmarks for imitation learning and reinforcement learning, enabling evaluation across different levels of generalization. At the core of the simulation platform is MetaSim, an infrastructure that abstracts diverse simulation environments into a universal interface. It restructures existing simulation environments into a simulator-agnostic configuration system, as well as an API aligning different simulator functionalities, such as launching simulation environments, loading assets with initial states, stepping the physics engine, etc. This abstraction ensures interoperability and extensibility. Comprehensive experiments demonstrate that RoboVerse enhances the performance of imitation learning, reinforcement learning, world model learning, and sim-to-real transfer. These results validate the reliability of our dataset and benchmarks, establishing RoboVerse as a robust solution for advancing robot learning.

cs.RO↗

arXiv2024

Robo-GS: A Physics Consistent Spatial-Temporal Model for Robotic Arm with Hybrid Representation

Real2Sim2Real plays a critical role in robotic arm control and reinforcement learning, yet bridging this gap remains a significant challenge due to the complex physical properties of robots and the objects they manipulate. Existing methods lack a comprehensive solution to accurately reconstruct real-world objects with spatial representations and their associated physics attributes. We propose a Real2Sim pipeline with a hybrid representation model that integrates mesh geometry, 3D Gaussian kernels, and physics attributes to enhance the digital asset representation of robotic arms. This hybrid representation is implemented through a Gaussian-Mesh-Pixel binding technique, which establishes an isomorphic mapping between mesh vertices and Gaussian models. This enables a fully differentiable rendering pipeline that can be optimized through numerical solvers, achieves high-fidelity rendering via Gaussian Splatting, and facilitates physically plausible simulation of the robotic arm's interaction with its environment using mesh-based methods. The code,full presentation and datasets will be made publicly available at our website https://robostudioapp.com

cs.RO↗

arXiv2023

MARS: An Instance-aware, Modular and Realistic Simulator for Autonomous Driving

Nowadays, autonomous cars can drive smoothly in ordinary cases, and it is widely recognized that realistic sensor simulation will play a critical role in solving remaining corner cases by simulating them. To this end, we propose an autonomous driving simulator based upon neural radiance fields (NeRFs). Compared with existing works, ours has three notable features: (1) Instance-aware. Our simulator models the foreground instances and background environments separately with independent networks so that the static (e.g., size and appearance) and dynamic (e.g., trajectory) properties of instances can be controlled separately. (2) Modular. Our simulator allows flexible switching between different modern NeRF-related backbones, sampling strategies, input modalities, etc. We expect this modular design to boost academic progress and industrial deployment of NeRF-based autonomous driving simulation. (3) Realistic. Our simulator set new state-of-the-art photo-realism results given the best module selection. Our simulator will be open-sourced while most of our counterparts are not. Project page: https://open-air-sun.github.io/mars/.

cs.CV↗