arXiv subjects

Harald Schnatz

Publications and source records attributed to Harald Schnatz.

7 recordsLinked to original sources

arXiv2025

The QTF-Backbone: Proposal for a Nationwide Optical Fibre Backbone in Germany for Quantum Technology and Time and Frequency Metrology

The recent breakthroughs in the distribution of quantum information and high-precision time and frequency (T&F) signals over long-haul optical fibre networks have transformative potential for physically secure communications, resilience of timing infrastructure (such as that supporting Global Navigation Satellite Systems (GNSS)) and fundamental physics. To date, these capabilities remain confined to isolated testbeds, with quantum and T&F signals accessible, for example in Germany, to only a few institutions. In this white paper we propose the QTF Backbone: a dedicated national fibre-optic infrastructure in Germany for the networked distribution of Quantum and T&F signals using dark fibres and specialised hardware. The QTF Backbone is planned as a four-phase deployment over ten years to ensure scalable, sustainable access for research institutions and industry. The concept builds on successful demonstrations of time and frequency distribution at high Technology Readiness Levels (TRLs) across Europe, including PTB-MPQ links in Germany, REFIMEVE in France, and the Italian LIFT network. The QTF Backbone will enable transformative Research and Development (R&D), support a nationwide QTF ecosystem, and ensure the transition from innovation to deployment. As a national and European hub, it will position Germany and Europe at the forefront of quantum networking, as well as T&F transfer.

physics.ins-det↗

arXiv2010

Long-distance remote comparison of ultrastable optical frequencies with 1e-15 instability in fractions of a second

We demonstrate a fully optical, long-distance remote comparison of independent ultrastable optical frequencies reaching a short term stability that is superior to any reported remote comparison of optical frequencies. We use two ultrastable lasers, which are separated by a geographical distance of more than 50 km, and compare them via a 73 km long phase-stabilized fiber in a commercial telecommunication network. The remote characterization spans more than one optical octave and reaches a fractional frequency instability between the independent ultrastable laser systems of 3e-15 in 0.1 s. The achieved performance at 100 ms represents an improvement by one order of magnitude to any previously reported remote comparison of optical frequencies and enables future remote dissemination of the stability of 100 mHz linewidth lasers within seconds.

physics.optics↗

arXiv2009

Phase- coherent comparison of two optical frequency standards over 146 km using a telecommunication fiber link

We have explored the performance of two "dark fibers" of a commercial telecommunication fiber link for a remote comparison of optical clocks. The two fibers, linking the Leibniz University of Hanover (LUH) with the Physi-kalisch-Technische Bundesanstalt (PTB) in Braunschweig, are connected in Hanover to form a total fiber length of 146 km. At PTB the performance of an optical frequency standard operating at 456 THz was imprinted to a cw trans-fer laser at 194 THz, and its frequency was transmitted over the fiber. In order to detect and compensate phase noise related to the optical fiber link we have built a low-noise optical fiber interferometer and investigated noise sources that affect the overall performance of the optical link. The frequency stability at the remote end has been measured using the clock laser of PTB's Yb+ frequency standard operating at 344 THz. We show that the frequency of a frequency-stabilized fiber laser can be transmitted over a total fiber length of 146 km with a relative frequency uncertainty below 1E-19, and short term frequency instability given by the fractional Allan deviation of sy(t)=3.3E-15/(t/s).

physics.optics↗

arXiv2008

Optical frequency synthesis and measurement using fibre-based femtosecond lasers

We report the synthesis and measurement of an ultra-precise and extremely stable optical frequency in the telecommunications window around 1543 nm. Using a fibre-based femtosecond frequency comb we have phase-stabilised a fibre laser at 194 THz to an optical frequency standard at 344 THz, thus transferring the properties of the optical frequency standard to another spectral region. Relative to the optical frequency standard, the synthesised frequency at 194 THz is determined to within 1 mHz and its fractional frequency instability is measured to be less than 2*10^{-15} at 1 s, reaching 5*10^{-18} after 8000 s. We also measured the synthesised frequency against a caesium fountain clock: here the frequency comparison itself contributes less than 4 mHz (2*10^{-17}) to the uncertainty. Our results confirm the suitability of fibre based frequency comb technology for precision measurements and frequency synthesis, and enable long-distance comparison of optical clocks by using optical fibres to transmit the frequency information.

physics.optics↗

arXiv2007

Absolute frequency measurement of the magnesium intercombination transition $^1S_0 \to ^3P_1$

We report on a frequency measurement of the $(3s^2)^1S_0\to(3s3p)^3P_1$ clock transition of $^{24}$Mg on a thermal atomic beam. The intercombination transition has been referenced to a portable primary Cs frequency standard with the help of a femtosecond fiber laser frequency comb. The achieved uncertainty is $2.5\times10^{-12}$ which corresponds to an increase in accuracy of six orders of magnitude compared to previous results. The measured frequency value permits the calculation of several other optical transitions from $^1S_0$ to the $^3P_J$-level system for $^{24}$Mg, $^{25}$Mg and $^{26}$Mg. We describe in detail the components of our optical frequency standard like the stabilized spectroscopy laser, the atomic beam apparatus used for Ramsey-Bordé interferometry and the frequency comb generator and discuss the uncertainty contributions to our measurement including the first and second order Doppler effect. An upper limit of $3\times10^{-13}$ in one second for the short term instability of our optical frequency standard was determined by comparison with a GPS disciplined quartz oscillator.

physics.atom-ph↗

arXiv2007

An Optical Lattice Clock with Spin-polarized 87Sr Atoms

We present a new evaluation of an 87Sr optical lattice clock using spin polarized atoms. The frequency of the 1S0-3P0 clock transition is found to be 429 228 004 229 873.6 Hz with a fractional accuracy of 2.6 10^{-15}, a value that is comparable to the frequency difference between the various primary standards throughout the world. This measurement is in excellent agreement with a previous one of similar accuracy.

physics.atom-ph↗

arXiv2001

Ultra-precise measurement of optical frequency ratios

We developed a novel technique for frequency measurement and synthesis, based on the operation of a femtosecond comb generator as transfer oscillator. The technique can be used to measure frequency ratios of any optical signals throughout the visible and near-infrared part of the spectrum. Relative uncertainties of $10^{-18}$ for averaging times of 100 s are possible. Using a Nd:YAG laser in combination with a nonlinear crystal we measured the frequency ratio of the second harmonic $ν_{SH}$ at 532 nm to the fundamental $ν_0$ at 1064 nm, $ν_{SH}/ν_0 = 2.000 000 000 000 000 001 \times (1 \pm 7 \times 10^{-19})$.

physics.optics↗