Searcharxiv⌕ Search

arXiv subjects

Hari Shankar Mahato

Publications and source records attributed to Hari Shankar Mahato.

10 recordsLinked to original sources

Navier-Stokes-Cahn-Hilliard system in a $3$D perforated domain with free slip and source term: Existence and homogenization

We study a time-dependent Navier--Stokes--Cahn--Hilliard system for a binary incompressible mixture in a periodically perforated domain $Ω_p^\varepsilon\subset\mathbb{R}^3$. The obstacles have diameter of order $\varepsilon^α$, with $α>3$, and mutual distance of order $\varepsilon$. Hence $\varepsilon^α/\varepsilon^3\to0$, which corresponds to the subcritical dilute regime. The model includes a periodically oscillating viscosity tensor, a nonconservative source term in the Cahn--Hilliard equation, no-slip conditions on the outer boundary, and free-slip conditions on the obstacle surfaces. The capillary coefficient $λ^\varepsilon>0$ depends on $\varepsilon$. For every fixed $\varepsilon>0$, we prove existence of a weak solution and derive estimates uniform in $\varepsilon$ with explicit $λ^\varepsilon$-scaling. Assuming $λ^\varepsilon\toλ\in[0,\infty)$, we derive the homogenized system on the whole domain. The subcritical obstacles leave no additional resistance term, and the cell problems are posed on the full periodic cell. The scalar correctors vanish, so the scalar diffusion operators remain unchanged, while the oscillating viscosity gives a time-dependent effective viscosity tensor. If $λ=0$, the limit decouples into an effective unsteady Stokes system and a Cahn--Hilliard system with source. If $λ>0$, the limit retains the Navier--Stokes--Cahn--Hilliard coupling, with convection, phase transport, and capillary forcing weighted by $\sqrtλ$. We also prove convergence of the time-integrated normalized microscopic energy to the corresponding macroscopic energy.

math.AP↗

A Two-Component Poro-viscoelastic System for Fibre-Reinforced Hydrogels: Analysis and Homogenization

We study the multiscale behavior of a coupled visco-poroelastic system arising in the modelling of fibre-reinforced hydrogels (FIHs) used in tissue engineering scaffolds. The composite material consists of a periodic fibre scaffold, which is governed by quasi-static linear elasticity, and a hydrogel phase saturating the interstitial space, which is modelled as a Biot linear poroelastic medium enhanced with Kelvin--Voigt structural damping. The two phases are coupled through continuity of displacement and traction across their shared interface. Both the fibre scaffold and the hydrogel phase are connected, so that mechanical forces can be transmitted through the composite and interstitial fluid can flow directly through the hydrogel network. Starting from a microscopic ($\varepsilon$-scale) model, we derive uniform a-priori estimates and establish well-posedness via a Rothe time-discretisation argument for both the case of standard Biot fluid content $η=0$ and the case of viscous fluid content $η=αδ>0$. We then perform a rigorous two-scale homogenization in the limit $\varepsilon \to 0$ using periodic unfolding. In addition to the usual effective elasticity, storage, coupling, and permeability coefficients, the homogenized constitutive laws contain nonlocal-in-time memory terms generated by the microscopic viscoelastic relaxation. All effective coefficients and memory kernels are explicitly characterized in terms of the microscale geometry and material parameters.

math.AP↗

Mathematical modelling and homogenization of thin fiber-reinforced hydrogels

This work considers simultaneous homogenization dimension reduction of a poroelastic model for thin fiber-reinforced hydrogels. The analysed medium is defined as a two-component system consisting of a continuous fiber framework with hydrogel inclusions arranged periodically throughout. The fibers are assumed to operate under quasi-stationary linear elasticity, whereas the hydrogel's hydromechanical behavior is represented using Biot's linear poroelasticity model. The asymptotic limit of the coupled system is established when the periodicity and thickness parameters are of the same order and tend to zero simultaneously, utilizing the re-scaling unfolding operator. It is demonstrated that the limit displacement exhibits Kirchhoff-Love-type behavior using the decomposition of plate displacements. Towards the end, a unique solution for the macroscopic problem has been demonstrated.

math.AP↗

Numerical Validation for a Stokes-Cahn-Hilliard System in a Porous Medium

Having a finite interfacial thickness, the phase-field models supply a way to model the fluid interfaces, which allows the calculations of the interface movements and deformations on the fixed grids. Such modeling is applied to the computation of two-phase incompressible Stokes flows in this paper, leading to a system of Stokes-Cahn-Hilliard equations. The Stokes equation is modified by adding the continuum force $ - c \nabla w $, where $ c $ is the order parameter and $ w $ is the chemical potential of $ c $. Similarly, the advection effects are modeled by addition of the term $ \vec{u} \cdot \nabla c $ in the Cahn-Hilliard equation. We hereby discuss how the solutions to the above equations approach the original sharp interface Stokes equation as the interfacial thickness $ \varepsilon$ tends to zero. We start with a microscopic model and then the homogenized or upscaled version to the same from author's previous work, cf. \cite{lakhmara2022}, where the analysis and homogenization of the system have been performed in detail. Further, we perform the numerical computations to compare the outcome of the effective model with the original heterogeneous microscale model.

math.AP↗

A micro-scale diffused interface model with Flory-Huggins logarithmic potential in a porous medium

A diffused interface model describing the evolution of two conterminous incompressible fluids in a porous medium is discussed. The system consists of the Cahn-Hilliard equation with Flory-Huggins logarithmic potential, coupled via surface tension term with the evolutionary Stokes equation at the pore scale. An evolving diffused interface of finite thickness, depending on the scale parameter $\varepsilon$ separates the fluids. The model is studied in a bounded domain $Ω$ with a sufficiently smooth boundary $\partial Ω$ in $\mathbb{R}^d$ for $ d = 2 $, $3$. At first, we investigate the existence of the system at the micro-scale and derive the essential \textit{a-priori} estimates. Then, using the two-scale convergence approach and unfolding operator technique, we obtain the homogenized model for the microscopic one.

math.AP↗

Limiting analysis of a crystal dissolution and precipitation model coupled with the unsteady stokes equations in the context of porous media flow

We study the diffusion-reaction-advection model for mobile chemical species together with the dissolution and precipitation of immobile species in a porous medium at the micro-scale. This leads to a system of semilinear parabolic partial differential equations in the pore space coupled with a nonlinear ordinary differential equation at the grain boundary of the solid matrices. The fluid flow within the pore space is given by unsteady Stokes equation. The novelty of this work is to do the iterative limit analysis of the system by tackling the nonlinear terms, monotone multi-valued dissolution rate term, space-dependent non-identical diffusion coefficients and nonlinear precipitation (reaction) term. We also establish the existence of a unique positive global weak solution for the coupled system. In addition to that, for upscaling we introduce a modified version of the extension operator. Finally, we conclude the paper by showing that the upscaled model admits a unique solution.

math.AP↗

Global existence and uniform boundedness of the classical solutions for the system of multi-species transport with mass control

The goal of this work is to establish the global existence of nonnegative classical solutions in all dimensions for a system of highly nonlinear reaction-diffusion equations. We address the case for different diffusion coefficients and the system of reversible reactions with non-homogeneous Neumann boundary conditions. The systems are assumed to satisfy only the mass control condition and to have locally Lipschitz nonlinearities with arbitrary growth. The key aspect of this work is that we didn't assume that the diffusion coefficients are close to each other. We utilize the duality method and the regularization of the heat operator to derive the result. We also illustrate the global in time bounds for the solutions. The application includes concrete corrosion in sewer pipes or sulfate corrosion in sewer pipes.

math.AP↗

Corrector estimates and numerical simulations of a system of diffusion-reaction-dissolution-precipitation model in a porous medium

A system of diffusion-reaction equations coupled with a dissolution-precipitation model is discussed. We start by introducing a microscale model together with its homogenized version. In the present paper, we first derive the corrector result to justify the obtained theoretical results. Furthermore, we perform the numerical computations to compare the outcome of the effective model with the original heterogeneous microscale model.

math.AP↗

Homogenization of a coupled incompressible Stokes-Cahn-Hilliard system modeling binary fluid mixture in a porous medium

A phase-field model for two-phase immiscible, incompressible porous media flow with surface tension effects is considered. The pore-scale model consists of a strongly coupled system of Stokes-Cahn-Hilliard equations. The fluids are separated by an evolving diffuse interface of a finite width depending on the scale parameter $\varepsilon$ in the considered model. At first the well-posedness of a coupled system of partial differential equations at micro scale is investigated. We obtained the homogenized equations for the microscopic model via unfolding operator and two-scale convergence approach.

math.AP↗

Homogenization of a Poroelasticity Model for Fibre-Reinforced Hydrogels

In this paper, the analysis and homogenization of a poroelastic model for the hydro-mechanical response of fibre-reinforced hydrogels is considered. Here, the medium in question is considered to be a highly heterogeneous two-component media composed of a connected fibre-scaffold with periodically distributed inclusions of hydrogel. While the fibres are assumed to be elastic, the hydromechanical response of hydrogel is modeled via \emph{Biot's poroelasticity}. We show that the resulting mathematical problem admits a unique weak solution and investigate the limit behavior (in the sense of two-scale convergence) of the solutions with respect to a scale parameter, characterizing the heterogeneity of the medium. Letting this scale parameter tend to zero, we arrive at an effective model where the micro variations of the pore pressure give rise to a micro stress correction at the macro scale.

math.AP↗