arXiv subjects

Hasan Sahin

Publications and source records attributed to Hasan Sahin.

28 records · Page 2Linked to original sources

arXiv2013

Adsorption of Alkali, Alkaline Earth and Transition Metal Atoms on Silicene

The adsorption characteristics of alkali, alkaline earth and transition metal adatoms on silicene, a graphene-like monolayer structure of silicon, are analyzed by means of first-principles calculations. In contrast to graphene, interaction between the metal atoms and the silicene surface is quite strong due to its highly reactive buckled hexagonal structure. In addition to structural properties, we also calculate the electronic band dispersion, net magnetic moment, charge transfer, workfunction and dipole moment of the metal adsorbed silicene sheets. Alkali metals, Li, Na and K, adsorb to hollow site without any lattice distortion. As a consequence of the significant charge transfer from alkalis to silicene metalization of silicene takes place. Trends directly related to atomic size, adsorption height, workfunction and dipole moment of the silicene/alkali adatom system are also revealed. We found that the adsorption of alkaline earth metals on silicene are entirely different from their adsorption on graphene. The adsorption of Be, Mg and Ca turns silicene into a narrow gap semiconductor. Adsorption characteristics of eight transition metals Ti, V, Cr, Mn, Fe, Co, Mo and W are also investigated. As a result of their partially occupied d orbital, transition metals show diverse structural, electronic and magnetic properties. Upon the adsorption of transition metals, depending on the adatom type and atomic radius, the system can exhibit metal, half-metal and semiconducting behavior. For all metal adsorbates the direction of the charge transfer is from adsorbate to silicene, because of its high surface reactivity. Our results indicate that the reactive crystal structure of silicene provides a rich playground for functionalization at nanoscale.

cond-mat.mtrl-sci↗

arXiv2012

Chlorine Adsorption on Graphene: Chlorographene

We perform first-principles structure optimization, phonon frequency and finite temperature molecular dynamics calculations based on density functional theory to study the interaction of chlorine atoms with graphene predicting the existence of possible chlorinated graphene derivatives. The bonding of a single chlorine atom is ionic through the transfer of charge from graphene to chlorine adatom and induces negligible local distortion in the underlying planar graphene. Different from hydrogen and fluorine adatoms, the migration of a single chlorine adatom on the surface of perfect graphene takes place almost without barrier. However, the decoration of one surface of graphene with Cl adatoms leading to various conformations cannot sustain due to strong Cl-Cl interaction resulting in the desorption through the formation of Cl$_2$ molecules. On the contrary, the fully chlorinated graphene, chlorographene CCl, where single chlorine atoms are bonded alternatingly to each carbon atom from different sides of graphene with $sp^3$-type covalent bonds, is buckled. We found that this structure is stable and is a direct band gap semiconductor, whose band gap can be tuned by applied uniform strain. Calculated phonon dispersion relation and four Raman-active modes of chlorographene are discussed.

cond-mat.mtrl-sci↗

arXiv2011

Graphene Nanomeshes: Existence of Defect-Induced Dirac Fermions on Graphene Host Matrix

Motivated by the state of the art method for fabricating high density periodic nanoscale defects in graphene, the structural, mechanical and electronic properties of defect-patterned graphene nanomeshes including diverse morphologies of adatoms and holes are investigated by means of first-principles calculations within density functional theory. It is found that various patterns of adatom groups yield metallic or semimetallic, even semiconducting behavior and specific patterns can be in a magnetic state. Even though the patterns of single adatoms dramatically alter the electronic structure of graphene, adatom groups of specific symmetry can maintain the Dirac fermion behavior. Nanoholes forming nanomesh are also investigated. Depending on the interplay between the repeat periodicity and the geometry of the hole, the nanomesh can be in different states ranging from metallic to semiconducting including semimetallic state with the bands crossing linearly at the Fermi level. We showed that forming periodically repeating superstructures in graphene matrix can develop a promising technique to engineer nanomaterials with desired electronic and magnetic properties.

cond-mat.mes-hall↗

arXiv2011

Structures of Fluorinated Graphenes and Their Signatures

Recent synthesis of fluorinated graphene introduced interesting stable derivatives of graphene. In particular, fluorographene (CF), namely fully fluorinated chair conformation, is found to display crucial features, such as high mechanical strength, charged surfaces, local magnetic moments due to vacancy defects and a wide band gap rapidly reducing with uniform strain. These properties, as well as structural parameters and electronic densities of states are found to scale with fluorine coverage. However, most of the experimental data reported to date neither for CF, nor for other CnF structures complies with the results obtained from first-principles calculations. In this study, we attempt to clarify the sources of disagreements.

cond-mat.mtrl-sci↗

arXiv2010

Spintronic Properties of Zigzag-Edged Triangular Graphene Flakes

We investigate quantum transport properties of triangular graphene flakes with zigzag edges by using first principles calculations. Triangular graphene flakes have large magnetic moments which vary with the number of hydrogen atoms terminating its edge atoms and scale with its size. Electronic transmission and current-voltage characteristics of these flakes, when contacted with metallic electrodes, reveal spin valve and remarkable rectification features. The transition from ferromagnetic to antiferromagnetic state under bias voltage can, however, terminate the spin polarizing effects for specific flakes. Geometry and size dependent transport properties of graphene flakes may be crucial for spintronic nanodevice applications.

cond-mat.mtrl-sci↗

arXiv2010

Graphane Nanoribbons: A Theoretical Study

In this study, we investigate the electronic and magnetic properties of graphane nanoribbons. We find that zigzag and armchair graphane nanoribbons with H-passivated edges are nonmagnetic semiconductors. While bare armchair ribbons are also nonmagnetic, adjacent dangling bonds of bare zigzag ribbons have antiferromagnetic ordering at the same edge. Band gaps of the H-passivated zigzag and armchair nanoribbons exponentially depend on their width. Detailed analysis of adsorption of C, O, Si, Pt, Ti, V and Fe atoms on the graphane ribbon surface reveal that functionalization of graphane ribbons is possible via these adatoms. It is found that C, O, V and Pt atoms have tendency to replace H atoms of graphane. We showed that significant spin polarizations in graphane can be achieved through creation of domains of H-vacancies and CH-divacancies.

cond-mat.mtrl-sci↗

arXiv2009

Magnetization of Graphane by Dehydrogenation

Each single hydrogen vacancy created at the surface of graphane gives rise to a local unpaired spin. For domains of hydrogen vacancies the situation is, however complex and depends on the size and geometry of domains, as well as whether the domains are single- or double-sided. In single-sided domains, hydrogen atoms at the other side are relocated to pair the spins of adjacent carbon atoms by forming pi-bonds. Owing to the different characters of exchange coupling in different ranges and interplay between unpaired spin and the binding geometry of hydrogen, vacancy domains can attain sizable net magnetic moments. Our results based on the first-principles calculations suggest that the size and ordering of magnetic moments of hydrogen vacancy domains with thin walls can be used for future data storage and spintronics applications.

cond-mat.mtrl-sci↗

arXiv2009

Monolayer honeycomb structures of group IV elements and III-V binary compounds

Using first-principles plane wave calculations, we investigate two dimensional honeycomb structure of Group IV elements and their binary compounds, as well as the compounds of Group III-V elements. Based on structure optimization and phonon mode calculations, we determine that 22 different honeycomb materials are stable and correspond to local minima on the Born-Oppenheimer surface. We also find that all the binary compounds containing one of the first row elements, B, C or N have planar stable structures. On the other hand, in the honeycomb structures of Si, Ge and other binary compounds the alternating atoms of hexagons are buckled, since the stability is maintained by puckering. For those honeycomb materials which were found stable, we calculated optimized structures, cohesive energies, phonon modes, electronic band structures, effective cation and anion charges, and some elastic constants. The band gaps calculated within Density Functional Theory using Local Density Approximation are corrected by GW0 method. Si and Ge in honeycomb structure are semimetal and have linear band crossing at the Fermi level which attributes massless Fermion character to charge carriers as in graphene. However, all binary compounds are found to be semiconductor with band gaps depending on the constituent atoms. We present a method to reveal elastic constants of 2D honeycomb structures from the strain energy and calculate the Poisson's ratio as well as in-plane stiffness values. Preliminary results show that the nearly lattice matched heterostructures of ...

cond-mat.mtrl-sci↗

arXiv2009

Two and one-dimensional honeycomb structures of silicon and germanium

Based on first-principles calculations of structure optimization, phonon modes and finite temperature molecular dynamics, we predict that silicon and germanium have stable, two-dimensional, low-buckled, honeycomb structures. Similar to graphene, they are ambipolar and their charge carriers can behave like a massless Dirac fermions due to their pi- and pi*-bands which are crossed linearly at the Fermi level. In addition to these fundamental properties, bare and hydrogen passivated nanoribbons of Si and Ge show remarkable electronic and magnetic properties, which are size and orientation dependent. These properties offer interesting alternatives for the engineering of diverse nanodevices.

cond-mat.mtrl-sci↗

arXiv2008

First Principles Calculations of Spin-Dependent Conductance of Graphene Flakes

Using ab initio density functional theory and quantum transport calculations based on nonequilibrium Green's function formalism we study structural, electronic, and transport properties of hydrogen-terminated short graphene nanoribbons (graphene flakes) and their functionalization with vanadium atoms. Rectangular graphene flakes are stable, having geometric and electronic structures quite similar to that of extended graphene nanoribbons. We show that a spin-polarized current can be produced by pure, hydrogenated rectangular graphene flakes by exploiting the spatially-separated edge states of the flake using asymmetric, non-magnetic contacts. Functionalization of the graphene flake with magnetic adatoms such as vanadium also leads to spin-polarized currents even with symmetric contacts. We observe and discuss sharp discontinuities in the transmission spectra which arise from Fano resonances of localized states in the flake.

cond-mat.mtrl-sci↗