arXiv subjects

Heikki Suominen

Publications and source records attributed to Heikki Suominen.

3 recordsLinked to original sources

arXiv2025

Multiplexed readout of Superconductor--Normal-Conductor--Superconductor bolometers

Recently, ultrasensitive calorimeters have been proposed as a resource-efficient solution for multiplexed qubit readout in superconducting large-scale quantum processors. However, experiments demonstrating frequency multiplexing of these superconductor--normal--conductor--superconductor (SNS) sensors are are lacking in the literature. To this end, we present the design, fabrication, and operation of three SNS sensors with frequency-multiplexed input and probe circuits, all on a single chip. These devices have their probe frequencies in the range 150 MHz--200 MHz, which is well detuned from the heater frequencies of 4.4 GHz--7.6 GHz compatible with typical readout frequencies of superconducting qubits. Importantly, we show on-demand triggering of both individual and multiple low-noise SNS bolometers with very low cross talk. These experiments pave the way for multiplexed bolometric characterization and calorimetric readout of multiple qubits, a promising step in minimizing related resources such as the number of readout lines and microwave isolators in large-scale superconducting quantum computers.

quant-ph↗

arXiv2024

Low-characteristic-impedance superconducting tadpole resonators in the sub-gigahertz regime

We demonstrate a simple and versatile resonator design based on a short strip of a typical coplanar waveguide shorted at one end to the ground and shunted at the other end with a large parallel-plate capacitor. Due to the shape of the structure, we coin it the tadpole resonator. The design allows tailoring the characteristic impedance of the resonator to especially suit applications requiring low values. We demonstrate characteristic impedances ranging from $Z_c = 2\,Ω$ to $10\,Ω$ and a frequency range from $f_0 = 290\,\mathrm{MHz}$ to $1.1\,\mathrm{GHz}$ while reaching internal quality factors of order $Q_{\mathrm{int}} = 8.5\times 10^3$ translating into a loss tangent of $\tan(δ) = 1.2\times 10^{-4}$ for the aluminium oxide used as the dielectric in the parallel plate capacitor. We conclude that these tadpole resonators are well suited for applications requiring low frequency and low charactersitic impedance while maintaining a small footprint on chip. The low characteristic impedance of the tadpole resonator renders it a promising candidate for achieving strong inductive coupling to other microwave components.

quant-ph↗

arXiv2024

Decay-protected superconducting qubit with fast control enabled by integrated on-chip filters

Achieving fast gates and long coherence times for superconducting qubits presents challenges, typically requiring either a stronger coupling of the drive line or an excessively strong microwave signal to the qubit. To address this, we introduce on-chip filters of the qubit drive exhibiting a stopband at the qubit frequency, thus enabling long coherence times and strong coupling at the subharmonic frequency, facilitating fast single-qubit gates, and reduced thermal load. The filters exhibit an extrinsic relaxation time of a few seconds while enabling sub-10-ns gates with subharmonic control. Here we show up to 200-fold improvement in the measured relaxation time at the stopband. Furthermore, we implement subharmonic driving of Rabi oscillations with a $π$ pulse duration of 12 ns. Our demonstration of on-chip filters and efficient subharmonic driving in a two-dimensional quantum processor paves the way for a scalable qubit architecture with reduced thermal load and noise from the control line.

quant-ph↗