arXiv subjects

Helder Fontes

Publications and source records attributed to Helder Fontes.

At least 19 recordsLinked to original sources

arXiv2025

RIoT Digital Twin: Modeling, Deployment, and Optimization of Reconfigurable IoT System with Optical-Radio Wireless Integration

This paper proposes an optimized Reconfigurable Internet of Things (RIoT) framework that integrates optical and radio wireless technologies with a focus on energy efficiency, scalability, and adaptability. To address the inherent complexity of hybrid optical-radio environments, a high-fidelity Digital Twin (DT) is developed within the Network Simulator 3 (NS-3) platform. The DT models deploy subsystems of the RIoT architecture, including radio frequency (RF) communication, optical wireless communication (OWC), and energy harvesting and consumption mechanisms that enable autonomous operation. Real-time energy and power measurements from target hardware platforms are also incorporated to ensure accurate representation of physical behavior and enable runtime analysis and optimization. Building on this foundation, a proactive cross-layer optimization strategy is devised to balance energy efficiency and quality of service (QoS). The strategy dynamically reconfigures RIoT nodes by adapting transmission rates, wake/sleep scheduling, and access technology selection. Results demonstrate that the proposed framework, combining digital twin technology, hybrid optical-radio integration, and data-driven energy modeling, substantially enhances the performance, resilience, and sustainability of 6G IoT networks.

cs.ET↗

arXiv2025

Edge-Enabled UAV Swarm Deployment for Rapid Post-Disaster Search and Rescue

This paper presents an optimized Joint Radar-Communication (JRC) system utilizing multiple Unmanned Aerial Vehicles (UAVs) to simultaneously achieve sensing and communication objectives. By leveraging UAVs equipped with dual radar and communication capabilities, the proposed framework aims to maximize radar sensing performance across all UAVs in challenging environments. The proposed approach focuses on formulating and solving a UAV positioning and power allocation problem to optimize multi-UAV sensing and communications performance over multiple targets within designated zones. Due to the NP-hard and combinatorial nature of the problem, we propose a Distributed JRC-based (DJRC) solution. This solution employs an efficient reward for potential actions and consistently selects the best action that maximizes the reward while ensuring both communications and sensing performance. Simulation results demonstrate significant performance improvements of the proposed solution over state-of-the-art radar- or communication-centric trajectory planning methods, with polynomial complexity dependent on the number of UAVs and linear dependence on the iteration count.

cs.ET↗

arXiv2025

A4FN: an Agentic AI Architecture for Autonomous Flying Networks

This position paper presents A4FN, an Agentic Artificial Intelligence (AI) architecture for intent-driven automation in Flying Networks (FNs) using Unmanned Aerial Vehicles (UAVs) as access nodes. A4FN leverages Generative AI and Large Language Models (LLMs) to enable real-time, context-aware network control via a distributed agentic system. It comprises two components: the Perception Agent (PA), which semantically interprets multimodal input -- including imagery, audio, and telemetry data -- from UAV-mounted sensors to derive Service Level Specifications (SLSs); and the Decision-and-Action Agent (DAA), which reconfigures the network based on inferred intents. A4FN embodies key properties of Agentic AI, including autonomy, goal-driven reasoning, and continuous perception-action cycles. Designed for mission-critical, infrastructure-limited scenarios such as disaster response, it supports adaptive reconfiguration, dynamic resource management, and interoperability with emerging wireless technologies. The paper details the A4FN architecture, its core innovations, and open research challenges in multi-agent coordination and Agentic AI integration in next-generation FNs.

cs.NI↗

arXiv2025

Context-aware Rate Adaptation for Predictive Flying Networks using Contextual Bandits

The increasing complexity of wireless technologies, such as Wi-Fi, presents significant challenges for Rate Adaptation (RA) due to the large configuration space of transmission parameters. While extensive research has been conducted on RA for low-mobility networks, existing solutions fail to adapt in flying networks, where high mobility and dynamic wireless conditions introduce additional uncertainty. We propose Linear Upper Confidence Bound for RA (LinRA), a novel Contextual Bandit-based approach that leverages real-time link context to optimize transmission rates. Designed for predictive flying networks, where future trajectories are known, LinRA proactively adapts to obstacles affecting channel quality. Simulation results demonstrate that LinRA converges $\mathbf{5.2\times}$ faster than state-of-the-art benchmarks and improves throughput by 80\% in Non Line-of-Sight (NLoS) conditions, matching the performance of ideal algorithms. With low time complexity, LinRA is a scalable and efficient RA solution for predictive flying networks.

cs.NI↗

arXiv2025

Joint Channel Bandwidth Assignment and Relay Positioning for Predictive Flying Networks

Flying Networks (FNs) have emerged as a promising solution to provide on-demand wireless connectivity when network coverage is insufficient or the communications infrastructure is compromised, such as in disaster management scenarios. Despite extensive research on Unmanned Aerial Vehicle (UAV) positioning and radio resource allocation, the challenge of ensuring reliable traffic relay through backhaul links in predictive FNs remains unexplored. This work proposes Simulated Annealing for predictive FNs (SAFnet), an innovative algorithm that optimizes network performance under positioning constraints, limited bandwidth and minimum rate requirements. Our algorithm uniquely leverages prior knowledge of the first-tier node trajectories to assign bandwidth and dynamically adjust the position of the second-tier flying relay. Building upon Simulated Annealing, our approach enhances this well-known AI algorithm with penalty functions, achieving performance levels comparable to exhaustive search while significantly reducing computational complexity.

cs.NI↗

arXiv2025

An Energy-Aware RIoT System: Analysis, Modeling and Prediction in the SUPERIOT Framework

This paper presents a comprehensive analysis of the energy consumption characteristics of a Silicon (Si)-based Reconfigurable IoT (RIoT) node developed in the initial phase of the SUPERIOT project, focusing on key operating states, including Bluetooth Low Energy (BLE) communication, Narrow-Band Visible Light Communication (NBVLC), sensing, and E-ink display. Extensive measurements were conducted to establish a detailed energy profile, which serves as a benchmark for evaluating the effectiveness of subsequent optimizations and future node iterations. To minimize the energy consumption, multiple optimizations were implemented at both the software and hardware levels, achieving a reduction of over 60% in total energy usage through software modifications alone. Further improvements were realized by optimizing the E-ink display driving waveform and implementing a very low-power mode for non-communication activities. Based on the measured data, three measurement-based energy consumption models were developed to characterize the energy behavior of the node under: (i) normal, unoptimized operation, (ii) low-power, software-optimized operation, and (iii) very low-power, hardware-optimized operation. These models, validated with new measurement data, achieved an accuracy exceeding 97%, confirming their reliability for predicting energy consumption in diverse configurations.

cs.ET↗

arXiv2024

On-demand 5G Private Networks using a Mobile Cell

This paper proposes the Mobile Cell (MC) concept for on-demand 5G private networks. The MC is designed to extend, restore, and reinforce 5G wireless coverage and network capacity on-demand, especially in areas with temporary communications needs or where it is costly or not possible to deploy a permanent fixed infrastructure. The design of the MC as well as the development, integration, and deployment in 5G private networks are discussed. The Mobile Cell concept can be applied in multiple real-world environments, including seaports and application scenarios. Similarly to critical hubs in the global supply chain, seaports require reliable, high-performance wireless communications to increase efficiency and manage dynamic operations in real-time. Current communications solutions in seaports typically rely on Wi-Fi and wired-based technologies. Wired-based technologies lack the necessary flexibility for dynamic environments. Wi-Fi is susceptible to interference from other systems operating in the same frequency bands. An MC operating in a licensed, interference-free spectrum is a promising solution to overcome these limitations and provide improved Quality of Service when using the 5G technology.

cs.NI↗

arXiv2024

Vision-Radio Experimental Infrastructure Architecture Towards 6G

Telecommunications and computer vision have evolved separately so far. Yet, with the shift to sub-terahertz (sub-THz) and terahertz (THz) radio communications, there is an opportunity to explore computer vision technologies together with radio communications, considering the dependency of both technologies on Line of Sight. The combination of radio sensing and computer vision can address challenges such as obstructions and poor lighting. Also, machine learning algorithms, capable of processing multimodal data, play a crucial role in deriving insights from raw and low-level sensing data, offering a new level of abstraction that can enhance various applications and use cases such as beamforming and terminal handovers. This paper introduces CONVERGE, a pioneering vision-radio paradigm that bridges this gap by leveraging Integrated Sensing and Communication (ISAC) to facilitate a dual "View-to-Communicate, Communicate-to-View" approach. CONVERGE offers tools that merge wireless communications and computer vision, establishing a novel Research Infrastructure (RI) that will be open to the scientific community and capable of providing open datasets. This new infrastructure will support future research in 6G and beyond concerning multiple verticals, such as telecommunications, automotive, manufacturing, media, and health.

cs.NI↗

arXiv2023

RateRL: A Framework for Developing RL-Based Rate Adaptation Algorithms in ns-3

The increasing complexity of recent Wi-Fi amendments is making the use of traditional algorithms and heuristics unfeasible to address the Rate Adaptation (RA) problem. This is due to the large combination of configuration parameters along with the high variability of the wireless channel. Recently, several works have proposed the usage of Reinforcement Learning (RL) techniques to address the problem. However, the proposed solutions lack sufficient technical explanation. Also, the lack of standard frameworks enabling the reproducibility of results and the limited availability of source code, makes the fair comparison with state of the art approaches a challenge. This paper proposes a framework, named RateRL, that integrates state of the art libraries with the well-known Network Simulator 3 (ns-3) to enable the implementation and evaluation of RL-based RA algorithms. To the best of our knowledge, RateRL is the first tool available to assist researchers during the implementation, validation and evaluation phases of RL-based RA algorithms and enable the fair comparison between competing algorithms.

cs.NI↗

arXiv2023

Trajectory-Aware Rate Adaptation for Flying Networks

Despite the trend towards ubiquitous wireless connectivity, there are scenarios where the communications infrastructure is damaged and wireless coverage is insufficient or does not exist, such as in natural disasters and temporary crowded events. Flying networks, composed of Unmanned Aerial Vehicles (UAV), have emerged as a flexible and cost-effective solution to provide on-demand wireless connectivity in these scenarios. UAVs have the capability to operate virtually everywhere, and the growing payload capacity makes them suitable platforms to carry wireless communications hardware. The state of the art in the field of flying networks is mainly focused on the optimal positioning of the flying nodes, while the wireless link parameters are configured with default values. On the other hand, current link adaptation algorithms are mainly targeting fixed or low mobility scenarios. We propose a novel rate adaptation approach for flying networks, named Trajectory Aware Rate Adaptation (TARA), which leverages the knowledge of flying nodes' movement to predict future channel conditions and perform rate adaptation accordingly. Simulation results of 100 different trajectories show that our solution increases throughput by up to 53% and achieves an average improvement of 14%, when compared with conventional rate adaptation algorithms such as Minstrel-HT.

cs.NI↗

arXiv2023

On the Analysis of Computational Delays in Reinforcement Learning-based Rate Adaptation Algorithms

Several research works have applied Reinforcement Learning (RL) algorithms to solve the Rate Adaptation (RA) problem in Wi-Fi networks. The dynamic nature of the radio link requires the algorithms to be responsive to changes in link quality. Delays in the execution of the algorithm may be detrimental to its performance, which in turn may decrease network performance. This aspect has been overlooked in the state of the art. In this paper, we present an analysis of common computational delays in RL-based RA algorithms, and propose a methodology that may be applied to reduce these computational delays and increase the efficiency of this type of algorithms. We apply the proposed methodology to an existing RL-based RA algorithm. The obtained experimental results indicate a reduction of one order of magnitude in the execution time of the algorithm, improving its responsiveness to link quality changes.

cs.NI↗

arXiv2023

UAV-Assisted Wireless Communications: An Experimental Analysis of A2G and G2A Channels

Unmanned Aerial Vehicles (UAVs) offer promising potential as communications node carriers, providing on-demand wireless connectivity to users. While existing literature presents various wireless channel models, it often overlooks the impact of UAV heading. This paper provides an experimental characterization of the Air-to-Ground (A2G) and Ground-to-Air (G2A) wireless channels in an open environment with no obstacles nor interference, considering the distance and the UAV heading. We analyze the received signal strength indicator and the TCP throughput between a ground user and a UAV, covering distances between 50~m and 500~m, and considering different UAV headings. Additionally, we characterize the antenna's radiation pattern based on UAV headings. The paper provides valuable perspectives on the capabilities of UAVs in offering on-demand and dynamic wireless connectivity, as well as highlights the significance of considering UAV heading and antenna configurations in real-world scenarios.

cs.NI↗

arXiv2023

Position-Based Machine Learning Propagation Loss Model Enabling Fast Digital Twins of Wireless Networks in ns-3

Digital twins have been emerging as a hybrid approach that combines the benefits of simulators with the realism of experimental testbeds. The accurate and repeatable set-ups replicating the dynamic conditions of physical environments, enable digital twins of wireless networks to be used to evaluate the performance of next-generation networks. In this paper, we propose the Position-based Machine Learning Propagation Loss Model (P-MLPL), enabling the creation of fast and more precise digital twins of wireless networks in ns-3. Based on network traces collected in an experimental testbed, the P-MLPL model estimates the propagation loss suffered by packets exchanged between a transmitter and a receiver, considering the absolute node's positions and the traffic direction. The P-MLPL model is validated with a test suite. The results show that the P-MLPL model can predict the propagation loss with a median error of 2.5 dB, which corresponds to 0.5x the error of existing models in ns-3. Moreover, ns-3 simulations with the P-MLPL model estimated the throughput with an error up to 2.5 Mbit/s, when compared to the real values measured in the testbed.

cs.NI↗

arXiv2022

Machine Learning Based Propagation Loss Module for Enabling Digital Twins of Wireless Networks in ns-3

The creation of digital twins of experimental testbeds allows the validation of novel wireless networking solutions and the evaluation of their performance in realistic conditions, without the cost, complexity and limited availability of experimental testbeds. Current trace-based simulation approaches for ns-3 enable the repetition and reproduction of the same exact conditions observed in past experiments. However, they are limited by the fact that the simulation setup must exactly match the original experimental setup, including the network topology, the mobility patterns and the number of network nodes. In this paper, we propose the Machine Learning based Propagation Loss (MLPL) module for ns-3. Based on network traces collected in an experimental testbed, the MLPL module estimates the propagation loss as the sum of a deterministic path loss and a stochastic fast-fading loss. The MLPL module is validated with unit tests. Moreover, we test the MLPL module with real network traces, and compare the results obtained with existing propagation loss models in ns-3 and real experimental results. The results obtained show that the MLPL module can accurately predict the propagation loss observed in a real environment and reproduce the experimental conditions of a given testbed, enabling the creation of digital twins of wireless network environments in ns-3.

cs.NI↗

arXiv2022

Wi-Fi Rate Adaptation using a Simple Deep Reinforcement Learning Approach

The increasing complexity of recent Wi-Fi amendments is making optimal Rate Adaptation (RA) a challenge. The use of classic algorithms or heuristic models to address RA is becoming unfeasible due to the large combination of configuration parameters along with the variability of the wireless channel. Machine Learning-based solutions have been proposed in the state of art, to deal with this complexity. However, they typically use complex models and their implementation in real scenarios is difficult. We propose a simple Deep Reinforcement Learning approach for the automatic RA in Wi-Fi networks, named Data-driven Algorithm for Rate Adaptation (DARA). DARA is standard-compliant. It dynamically adjusts the Wi-Fi Modulation and Coding Scheme (MCS) solely based on the observation of the Signal-to-Noise Ratio (SNR) of the received frames at the transmitter. Our simulation results show that DARA achieves up to 15\% higher throughput when compared with Minstrel High Throughput (HT) and equals the performance of the Ideal Wi-Fi RA algorithm.

cs.NI↗

arXiv2021

Placement and Allocation of Communications Resources in Slicing-aware Flying Networks

Network slicing emerged in 5G networks as a key component to enable the use of multiple services with different performance requirements on top of a shared physical network infrastructure. A major challenge lies on ensuring wireless coverage and enough communications resources to meet the target Quality of Service (QoS) levels demanded by these services, including throughput and delay guarantees. The challenge is exacerbated in temporary events, such as disaster management scenarios and outdoor festivities, where the existing wireless infrastructures may collapse, fail to provide sufficient wireless coverage, or lack the required communications resources. Flying networks, composed of Unmanned Aerial Vehicles (UAVs), emerged as a solution to provide on-demand wireless coverage and communications resources anywhere, anytime. However, existing solutions mostly rely on best-effort networks. The main contribution of this paper is SLICER, an algorithm enabling the placement and allocation of communications resources in slicing-aware flying networks. The evaluation carried out by means of ns-3 simulations shows SLICER can meet the targeted QoS levels, while using the minimum amount of communications resources.

cs.NI↗

arXiv2021

A Fast Gateway Placement Algorithm for Flying Networks

The ability to operate anywhere, anytime, as well as their capability to hover and carry cargo on board make Unmanned Aerial Vehicles (UAVs) suitable platforms to act as Flying Gateways (FGWs) to the Internet. The problem is the optimal placement of the FGWs within the flying network, such that the Quality of Service (QoS) offered is maximized. The literature has been focused on optimizing the placement of the Flying Access Points (FAPs), which establish high-capacity small cells to serve the users on the ground, overlooking the backhaul network design, including the FGW placement. The FGW placement problem is exacerbated in highly dynamic flying networks, where the dynamic traffic demand and the movements of the users may induce frequent changes in the placement of the FAPs. The main contribution of this paper is a fast gateway placement (F-GWP) algorithm for flying networks that determines the optimal position of a FGW. With F-GWP, backhaul communications paths with high enough capacity are established between the FAPs and the FGW, in order to accommodate the traffic demand of the users on the ground. Simulation and experimental results show F-GWP is two orders of magnitude faster than its state of the art counterpart, while ensuring the same flying network performance.

cs.NI↗

arXiv2021

Traffic-aware Gateway Placement for High-capacity Flying Networks

The ability to operate virtually anywhere and carry payload makes Unmanned Aerial Vehicles (UAVs) perfect platforms to carry communications nodes, including Wi-Fi Access Points (APs) and cellular Base Stations (BSs). This is paving the way to the deployment of flying networks that enable communications to ground users on demand. Still, flying networks impose significant challenges in order to meet the Quality of Experience expectations. State of the art works addressed these challenges, but have been focused on routing and the placement of the UAVs as APs and BSs serving the ground users, overlooking the backhaul network design. The main contribution of this paper is a centralized traffic-aware Gateway UAV Placement (GWP) algorithm for flying networks with controlled topology. GWP takes advantage of the knowledge of the offered traffic and the future topologies of the flying network to enable backhaul communications paths with high enough capacity. The performance achieved using the GWP algorithm is evaluated using ns-3 simulations. The obtained results demonstrate significant gains regarding aggregate throughput and delay.

cs.NI↗