arXiv subjects

Helin Zhang

Publications and source records attributed to Helin Zhang.

13 recordsLinked to original sources

arXiv2026

Hardware-efficient erasure-error detection with an integer fluxonium

Erasure-error detection can improve the efficiency of quantum error correction by revealing the times and locations of their error events. In this work, we demonstrate erasure conversions and mid-circuit erasure detections in a single integer fluxonium, in which the states $\mathrm{|g\rangle, |f\rangle}$ encode the logical states and $\mathrm{|e\rangle}$ encodes the erasure state. The integer fluxonium suppresses direct $|\mathrm{f} \rangle \rightarrow |\mathrm{g} \rangle$ transitions and allows the dominant $|\mathrm{f} \rangle \rightarrow |\mathrm{e}\rangle$ transitions to be converted into detectable erasures. Furthermore, we identified a design space that nullifies the resonant-frequency shift between the two logical states, enabling ancilla-free mid-circuit erasure checks using the same resonator employed for final readout. By discarding the detected erasure events, we achieved an 8.4-fold increase in the $|\mathrm{f}\rangle$ state lifetime, a 1.38-fold increase in the Hahn-echo time, and a reduction of single-qubit gate error from 0.061(2)% to 0.030(5)%. Our results establish integer fluxonium as a hardware-efficient platform for erasure-error detection and conversion, while identifying the improvements required to realize an effective erasure qubit with high erasure bias.

quant-ph↗

arXiv2026

Characterization and Comparison of Energy Relaxation in Fluxonium Qubits

Fluxonium superconducting qubits have demonstrated long coherence times and high single- and two-qubit gate fidelities, making them a favorable building block for superconducting quantum processors. We investigate the dominant limitations to fluxonium qubit energy relaxation time $T_1$ using a set of eight planar, aluminum-on-silicon qubits. We find that a circuit-based model for capacitive dielectric loss best captures the frequency dependence of $T_1$, which we analyze within both a two-level and a six-level energy relaxation model. We convert the measured $T_1$ into an effective capacitive quality factor $Q_\mathrm{C}^{\mathrm{eff}}$ to compare qubits on equal footing, accounting for independently estimated contributions from $1/f$ flux noise and radiative loss to the control and readout circuitry. We apply this methodology to compare qubits from two fabrication processes: a baseline process and one that applies a fluorine-based wet treatment prior to Josephson junction deposition. We resolve a small improvement of (13.8 $\pm$ 8.4$)\%$ in the process mean $Q_\mathrm{C}^{\mathrm{eff}}$, indicating that the fluorine treatment may have reduced loss from the metal-substrate interface, but did not address the primary source of loss in these fluxonium qubits.

quant-ph↗

arXiv2025

ZZ-Free Two-Transmon CZ Gate Mediated by a Fluxonium Coupler

Eliminating residual ZZ interactions in a two-qubit system is essential for reducing coherent errors during quantum operations. In a superconducting circuit platform, coupling two transmon qubits via a transmon coupler has been shown to effectively suppress residual ZZ interactions. However, in such systems, perfect cancellation usually requires the qubit-qubit detuning to be smaller than the individual qubit anharmonicities, which exacerbates frequency crowding and microwave crosstalk. To address this limitation, we introduce TFT (Transmon-Fluxonium-Transmon) architecture, wherein two transmon qubits are coupled via a fluxonium qubit. The coupling mediated by the fluxonium eliminates residual ZZ interactions even for transmons detuned larger than their anharmonicities. We experimentally identified zero-ZZ interaction points at qubit-qubit detunings of 409 MHz and 616 MHz from two distinct TFT devices. We then implemented an adiabatic, coupler-flux-biased controlled-Z gate on both devices, achieving CZ gate fidelities of 99.64(6)% and 99.68(8)%.

quant-ph↗

arXiv2025

Emergent Harmonics in Josephson Tunnel Junctions Due to Series Inductance

Josephson tunnel junctions are essential elements of superconducting quantum circuits. The operability of these circuits presumes a $2π$-periodic sinusoidal potential of a tunnel junction, but higher-order corrections to this Josephson potential, often referred to as "harmonics," cause deviations from the expected circuit behavior. Two potential sources for these harmonics are the intrinsic current-phase relationship of the Josephson junction and the inductance of the metallic traces connecting the junction to other circuit elements. Here, we introduce a method to distinguish the origin of the observed harmonics using nearly-symmetric superconducting quantum interference devices (SQUIDs). Spectroscopic measurements of level transitions in multiple devices reveal features that cannot be explained by a standard cosine potential, but are accurately reproduced when accounting for a second-harmonic contribution to the model. The observed scaling of the second harmonic with Josephson-junction size indicates that it is due almost entirely to the trace inductance. These results inform the design of next-generation superconducting circuits for quantum information processing and the investigation of the supercurrent diode effect.

quant-ph↗

arXiv2025

Temperature and Magnetic-Field Dependence of Energy Relaxation in a Fluxonium Qubit

Noise from material defects at device interfaces is known to limit the coherence of superconducting circuits, yet our understanding of the defect origins and noise mechanisms remains incomplete. Here we investigate the temperature and in-plane magnetic-field dependence of energy relaxation in a low-frequency fluxonium qubit, where the sensitivity to flux noise and charge noise arising from dielectric loss can be tuned by applied flux. We observe an approximately linear scaling of flux noise with temperature $T$ and a power-law dependence of dielectric loss $T^3$ up to 100 mK. Additionally, we find that the dielectric-loss-limited $T_1$ decreases with weak in-plane magnetic fields, suggesting a potential magnetic-field response of the underlying charge-coupled defects. We implement a multi-level decoherence model in our analysis, motivated by the widely tunable matrix elements and transition energies approaching the thermal energy scale in our system. These findings offer insight for fluxonium coherence modeling and should inform microscopic theories of intrinsic noise in superconducting circuits.

quant-ph↗

arXiv2024

Qubit-State Purity Oscillations from Anisotropic Transverse Noise

We explore the dynamics of qubit-state purity in the presence of transverse noise that is anisotropically distributed in the Bloch-sphere XY plane. We perform Ramsey experiments with noise injected along a fixed laboratory-frame axis and observe oscillations in the purity at twice the qubit frequency arising from the intrinsic qubit Larmor precession. We probe the oscillation dependence on the noise anisotropy, orientation, and power spectral density, using a low-frequency fluxonium qubit. Our results elucidate the impact of transverse noise anisotropy on qubit decoherence and may be useful to disentangle charge and flux noise in superconducting quantum circuits.

quant-ph↗

arXiv2024

Suppressing Counter-Rotating Errors for Fast Single-Qubit Gates with Fluxonium

Qubit decoherence unavoidably degrades the fidelity of quantum logic gates. Accordingly, realizing gates that are as fast as possible is a guiding principle for qubit control, necessitating protocols for mitigating error channels that become significant as gate time is decreased. One such error channel arises from the counter-rotating component of strong, linearly polarized drives. This error channel is particularly important when gate times approach the qubit Larmor period and represents the dominant source of infidelity for sufficiently fast single-qubit gates with low-frequency qubits such as fluxonium. In this work, we develop and demonstrate two complementary protocols for mitigating this error channel. The first protocol realizes circularly polarized driving in circuit quantum electrodynamics (QED) through simultaneous charge and flux control. The second protocol -- commensurate pulses -- leverages the coherent and periodic nature of counter-rotating fields to regularize their contributions to gates, enabling single-qubit gate fidelities reliably exceeding $99.997\%$. This protocol is platform independent and requires no additional calibration overhead. This work establishes straightforward strategies for mitigating counter-rotating effects from strong drives in circuit QED and other platforms, which we expect to be helpful in the effort to realize high-fidelity control for fault-tolerant quantum computing.

quant-ph↗

arXiv2023

Experimental advances with the QICK (Quantum Instrumentation Control Kit) for superconducting quantum hardware

The QICK is a standalone open source qubit controller that was first introduced in 2022. In this follow-up work, we present recent experimental use cases that the QICK uniquely enabled for superconducting qubit systems. These include multiplexed signal generation and readout, mixer-free readout, pre-distorted fast flux pulses, and phase-coherent pulses for parametric operations, including high-fidelity parametric entangling gates. We explain in detail how the QICK was used to enable these experiments.

quant-ph↗

arXiv2023

Tunable inductive coupler for high fidelity gates between fluxonium qubits

The fluxonium qubit is a promising candidate for quantum computation due to its long coherence times and large anharmonicity. We present a tunable coupler that realizes strong inductive coupling between two heavy-fluxonium qubits, each with $\sim50$MHz frequencies and $\sim5$ GHz anharmonicities. The coupler enables the qubits to have a large tuning range of $\textit{XX}$ coupling strengths ($-35$ to $75$ MHz). The $\textit{ZZ}$ coupling strength is $<3$kHz across the entire coupler bias range, and $<100$Hz at the coupler off-position. These qualities lead to fast, high-fidelity single- and two-qubit gates. By driving at the difference frequency of the two qubits, we realize a $\sqrt{i\mathrm{SWAP}}$ gate in $258$ns with fidelity $99.72\%$, and by driving at the sum frequency of the two qubits, we achieve a $\sqrt{b\mathrm{SWAP}}$ gate in $102$ns with fidelity $99.91\%$. This latter gate is only 5 qubit Larmor periods in length. We run cross-entropy benchmarking for over $20$ consecutive hours and measure stable gate fidelities, with $\sqrt{b\mathrm{SWAP}}$ drift ($2 σ$) $< 0.02\%$ and $\sqrt{i\mathrm{SWAP}}$ drift $< 0.08\%$.

quant-ph↗

arXiv2022

Fast high-fidelity gates for galvanically-coupled fluxonium qubits using strong flux modulation

Long coherence times, large anharmonicity and robust charge-noise insensitivity render fluxonium qubits an interesting alternative to transmons. Recent experiments have demonstrated record coherence times for low-frequency fluxonia. Here, we propose a galvanic-coupling scheme with flux-tunable $\textit{XX}$ coupling. To implement a high-fidelity entangling $\sqrt{i\mathrm{SWAP}}$ gate, we modulate the strength of this coupling and devise variable-time identity gates to synchronize required single-qubit operations. Both types of gates are implemented using strong ac flux drives, lasting for only a few drive periods. We employ a theoretical framework capable of capturing qubit dynamics beyond the rotating-wave approximation (RWA) as required for such strong drives. We predict an open-system fidelity of $F>0.999$ for the $\sqrt{i\mathrm{SWAP}}$ gate under realistic conditions.

quant-ph↗

arXiv2022

The QICK (Quantum Instrumentation Control Kit): Readout and control for qubits and detectors

We introduce a Xilinx RFSoC-based qubit controller (called the Quantum Instrumentation Control Kit, or QICK for short) which supports the direct synthesis of control pulses with carrier frequencies of up to 6 GHz. The QICK can control multiple qubits or other quantum devices. The QICK consists of a digital board hosting an RFSoC (RF System-on-Chip) FPGA \cite{zcu111}, custom firmware and software and an optional companion custom-designed analog front-end board. We characterize the analog performance of the system, as well as its digital latency, important for quantum error correction and feedback protocols. We benchmark the controller by performing standard characterizations of a transmon qubit. We achieve an average Clifford gate fidelity of $\mathcal{F}_{avg}=99.93\%$. All of the schematics, firmware, and software are open-source \cite{QICKrepo}.

quant-ph↗

arXiv2020

Universal fast flux control of a coherent, low-frequency qubit

The \textit{heavy-fluxonium} circuit is a promising building block for superconducting quantum processors due to its long relaxation and dephasing time at the half-flux frustration point. However, the suppressed charge matrix elements and low transition frequency have made it challenging to perform fast single-qubit gates using standard protocols. We report on new protocols for reset, fast coherent control, and readout, that allow high-quality operation of the qubit with a 14 MHz transition frequency, an order of magnitude lower in energy than the ambient thermal energy scale. We utilize higher levels of the fluxonium to initialize the qubit with $97$\% fidelity, corresponding to cooling it to $190~\mathrm{μK}$. We realize high-fidelity control using a universal set of single-cycle flux gates, which are comprised of directly synthesizable fast pulses, while plasmon-assisted readout is used for measurements. On a qubit with $T_1, T_{2e}\sim$~300~$\mathrm{μs}$, we realize single-qubit gates in $20-60$~ns with an average gate fidelity of $99.8\%$ as characterized by randomized benchmarking.

quant-ph↗

arXiv2019

Doppler Broadening in $^{20}$Mg($βpγ$)$^{19}$Ne Decay

Background: The $^{15}$O($α,γ$)$^{19}$Ne bottleneck reaction in Type I x-ray bursts is the most important thermonuclear reaction rate to constrain experimentally, in order to improve the accuracy of burst light-curve simulations. A proposed technique to determine the thermonuclear rate of this reaction employs the $^{20}$Mg($βpα$)$^{15}$O decay sequence. The key $^{15}$O($α,γ$)$^{19}$Ne resonance at an excitation of 4.03 MeV is now known to be fed in $^{20}$Mg($βpγ$)$^{19}$Ne; however, the energies of the protons feeding the 4.03 MeV state are unknown. Knowledge of the proton energies will facilitate future $^{20}$Mg($βp α$)$^{15}$O measurements. Purpose: To determine the energy of the proton transition feeding the 4.03 MeV state in $^{19}$Ne. Method: A fast beam of $^{20}$Mg was implanted into a plastic scintillator, which was used to detect $β$ particles. 16 high purity germanium detectors were used to detect $γ$ rays emitted following $βp$ decay. A Monte Carlo method was used to simulate the Doppler broadening of $^{19}$Ne $γ$ rays and compare to the experimental data. Results: The center of mass energy between the proton and $^{19}$Ne, feeding the 4.03 MeV state, is measured to be 1.21${^{+0.25}_{-0.22}}$ MeV, corresponding to a $^{20}$Na excitation energy of 7.44${^{+0.25}_{-0.22}}$ MeV. Absolute feeding intensities and $γ$-decay branching ratios of $^{19}$Ne states were determined including the 1615 keV state. A new $γ$ decay branch from the 1536 keV state in $^{19}$Ne to the ground state is reported. The lifetime of the 1507 keV state in $^{19}$Ne is measured to be 4.3${^{+1.3}_{-1.1}}$ ps resolving discrepancies in the literature. Conflicting $^{20}$Mg($βp$) decay schemes in published literature are clarified.

nucl-ex↗